From: Anton Arapov Date: Sat, 29 Dec 2018 00:28:27 +0000 (+0100) Subject: ramips: add RB750Gr3 native support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=52f2d7d2a9dc3e142bb957462a30806eb5cebaf4;p=openwrt%2Fstaging%2Fynezz.git ramips: add RB750Gr3 native support This patch adds support of MikroTik RouterBOARD 750Gr3, without the need to reflashing the bootloader. Installation through RouterBoot follows the usual MikroTik method https://openwrt.org/toh/mikrotik/common Since the image isn't compatible with RouterBOARD 750Gr3 installations which have replaced the bootloader, the former used userspace boardname is not added to the SUPPORTED_DEVICES, to prevent a brick while trying to upgrade to the image with native support. Signed-off-by: Anton Arapov Signed-off-by: Thibaut VARĂˆNE Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2dbd891574..80940db763 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -222,9 +222,9 @@ ramips_setup_interfaces() jhr-n805r|\ jhr-n825r|\ jhr-n926r|\ + mikrotik,rb750gr3|\ mikrotik,rbm33g|\ mzk-wdpr|\ - rb750gr3|\ rt-n14u|\ skylab,skw92a|\ tplink,c20-v4|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index ca71ef3b84..49bed87c48 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -415,9 +415,6 @@ ramips_board_detect() { *"R6220") name="r6220" ;; - *"RB750Gr3") - name="rb750gr3" - ;; *"RE350 v1") name="re350-v1" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 97fbaefea6..a50e943bc9 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -13,6 +13,7 @@ platform_pre_upgrade() { local board=$(board_name) case "$board" in + mikrotik,rb750gr3|\ mikrotik,rbm11g|\ mikrotik,rbm33g) [ -z "$(rootfs_type)" ] && mtd erase firmware diff --git a/target/linux/ramips/dts/RB750Gr3.dts b/target/linux/ramips/dts/RB750Gr3.dts index 6b18cce78f..da9167ad81 100644 --- a/target/linux/ramips/dts/RB750Gr3.dts +++ b/target/linux/ramips/dts/RB750Gr3.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "console=ttyS0,57600"; + bootargs = "console=ttyS0,115200"; }; gpio-leds { @@ -89,34 +89,54 @@ #size-cells = <1>; partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; + label = "RouterBoot"; + reg = <0x0 0x40000>; read-only; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader1"; + reg = <0x0 0xf000>; + read-only; + }; + + hard_config: partition@f000 { + label = "hard_config"; + reg = <0xf000 0x1000>; + read-only; + }; + + partition@10000 { + label = "bootloader2"; + reg = <0x10000 0xf000>; + read-only; + }; + + partition@20000 { + label = "soft_config"; + reg = <0x20000 0x1000>; + }; + + partition@30000 { + label = "bios"; + reg = <0x30000 0x1000>; + read-only; + }; }; - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; + partition@40000 { + compatible = "mikrotik,minor"; label = "firmware"; - reg = <0x50000 0xfb0000>; + reg = <0x040000 0xfc0000>; }; }; }; }; ðernet { - mtd-mac-address = <&factory 0xe000>; + mtd-mac-address = <&hard_config 0x0010>; mtd-mac-address-increment = <1>; }; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 0edc8afcae..3f0c4bb76e 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -324,14 +324,6 @@ define Device/netgear_r6350 endef TARGET_DEVICES += netgear_r6350 -define Device/rb750gr3 - DTS := RB750Gr3 - IMAGE_SIZE := $(ralink_default_fw_size_16M) - DEVICE_TITLE := MikroTik RB750Gr3 - DEVICE_PACKAGES := kmod-usb3 uboot-envtools -endef -TARGET_DEVICES += rb750gr3 - define Device/MikroTik BLOCKSIZE := 64k IMAGE_SIZE := 16128k @@ -343,6 +335,13 @@ define Device/MikroTik append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef +define Device/mikrotik_rb750gr3 + $(Device/MikroTik) + DTS := RB750Gr3 + DEVICE_TITLE := MikroTik RouterBOARD RB750Gr3 +endef +TARGET_DEVICES += mikrotik_rb750gr3 + define Device/mikrotik_rbm33g $(Device/MikroTik) DTS := RBM33G