From: Sebastian Schaper Date: Sat, 27 Mar 2021 23:32:46 +0000 (+0100) Subject: ath79: add support for ZyXEL NWA1123-NI X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=527be5a456cecdc4e3296816906e117ec04bfdff;p=openwrt%2Fstaging%2Fblogic.git ath79: add support for ZyXEL NWA1123-NI Specifications: * AR9342, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R, 2.4 GHz * AR9382 PCIe card, 802.11n 2T2R, 5 GHz * 1x Gigabit Ethernet (AR8035), 802.3af PoE Installation: * OEM Web UI is at 192.168.1.2 login as `admin` with password `1234` * Flash factory-AAEO.bin The string `AAEO` needs to be present within the file name of the uploaded image to be accepted by the OEM Web-based updater, the factory image is named accordingly to save the user from the hassle of manual renaming. TFTP Recovery: * Open the case, connect to TTL UART port (this is the official method described by Zyxel, the reset button is useless during power-on) * Extract factory image (.tar.bz2), serve `vmlinux_mi124_f1e.lzma.uImage` and `mi124_f1e-jffs2` via tftp at 192.168.1.10 * Interrupt uboot countdown, execute commands `run lk` `run lf` to flash the kernel / filesystem accordingly MAC addresses as verified by OEM firmware: use address source LAN *:fb mib0 0x30 ('eth0mac'), art 0x1002 (label) 2g *:fc mib0 0x4b ('wifi0mac') 5g *:fd mib0 0x66 ('wifi1mac') Signed-off-by: Sebastian Schaper --- diff --git a/target/linux/ath79/dts/ar9342_zyxel_nwa1123-ni.dts b/target/linux/ath79/dts/ar9342_zyxel_nwa1123-ni.dts new file mode 100644 index 000000000000..b999c960c4a0 --- /dev/null +++ b/target/linux/ath79/dts/ar9342_zyxel_nwa1123-ni.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9342_zyxel_nwa11xx.dtsi" + +/ { + compatible = "zyxel,nwa1123-ni", "qca,ar9342"; + model = "Zyxel NWA1123-NI"; + + aliases { + label-mac-device = ð0; + led-boot = &led_status_green; + led-failsafe = &led_status_amber; + led-running = &led_status_green; + led-upgrade = &led_status_amber; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_status_amber: status_amber { + label = "amber:status"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 34f04b5300df..f0bc9b3a9cdc 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -110,7 +110,8 @@ ath79_setup_interfaces() ubnt,unifi|\ wd,mynet-wifi-rangeextender|\ winchannel,wb2000|\ - zyxel,nwa1121-ni) + zyxel,nwa1121-ni|\ + zyxel,nwa1123-ni) ucidef_set_interface_lan "eth0" ;; airtight,c-75) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 95ff6083c7f8..15bdf81a053c 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -68,4 +68,8 @@ case "$board" in [ "$PHYNBR" -eq 1 ] && \ mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress ;; + zyxel,nwa1123-ni) + [ "$PHYNBR" -eq 1 ] && \ + mtd_get_mac_text mib0 0x66 > /sys${DEVPATH}/macaddress + ;; esac diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 9ba5e20e5725..617f1eed3047 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -2716,6 +2716,14 @@ define Device/zyxel_nwa1121-ni endef TARGET_DEVICES += zyxel_nwa1121-ni +define Device/zyxel_nwa1123-ni + $(Device/zyxel_nwa11xx) + DEVICE_MODEL := NWA1123 + DEVICE_VARIANT := NI + ZYXEL_MODEL_STRING := AAEO +endef +TARGET_DEVICES += zyxel_nwa1123-ni + define Device/zyxel_nbg6616 SOC := qca9557 DEVICE_VENDOR := ZyXEL