From: David Bauer Date: Wed, 9 Dec 2020 21:18:43 +0000 (+0100) Subject: ath79: add support for Ubiquiti UniFi AP Outdoor+ X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=51f578efa5012464a21565556eaf2027b3d88ab5;p=openwrt%2Fstaging%2Fjogo.git ath79: add support for Ubiquiti UniFi AP Outdoor+ Hardware -------- Atheros AR7241 16M SPI-NOR 64M DDR2 Atheros AR9283 2T2R b/g/n 2x Fast Ethernet (built-in) Installation ------------ Transfer the Firmware update to the device using SCP. Install using fwupdate.real -m -d Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/dts/ar7241_ubnt_unifi-ap-outdoor-plus.dts b/target/linux/ath79/dts/ar7241_ubnt_unifi-ap-outdoor-plus.dts new file mode 100644 index 0000000000..68f83f7a66 --- /dev/null +++ b/target/linux/ath79/dts/ar7241_ubnt_unifi-ap-outdoor-plus.dts @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar7241_ubnt_unifi.dtsi" + +/ { + compatible = "ubnt,unifi-ap-outdoor-plus", "qca,ar7241"; + model = "Ubiquiti UniFi AP Outdoor+"; + + aliases { + led-boot = &led_white; + led-failsafe = &led_white; + led-running = &led_blue; + led-upgrade = &led_blue; + }; + + leds { + compatible = "gpio-leds"; + + led_blue: blue { + label = "blue"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + + led_white: white { + label = "white"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf60000>; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x300000>; + /* Can be resized w/o issues. + * U-Boot can load kernel from the + * entirety of the "firmware" partition space. + */ + }; + + partition@300000 { + label = "rootfs"; + reg = <0x300000 0xc60000>; + }; + }; + + partition@fb0000 { + label = "cfg"; + reg = <0xfb0000 0x40000>; + read-only; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x6>; +}; + +&wifi { + ubnt,hsr; +}; diff --git a/target/linux/ath79/dts/ar7241_ubnt_unifi.dts b/target/linux/ath79/dts/ar7241_ubnt_unifi.dts index bdb4c61a48..287e8cc7db 100644 --- a/target/linux/ath79/dts/ar7241_ubnt_unifi.dts +++ b/target/linux/ath79/dts/ar7241_ubnt_unifi.dts @@ -1,9 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "ar7241.dtsi" - -#include -#include +#include "ar7241_ubnt_unifi.dtsi" / { compatible = "ubnt,unifi", "qca,ar7241"; @@ -14,23 +11,6 @@ led-failsafe = &led_dome_green; led-running = &led_dome_green; led-upgrade = &led_dome_green; - label-mac-device = &wifi; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; - - keys { - compatible = "gpio-keys"; - - reset { - linux,code = ; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; }; leds { @@ -48,14 +28,6 @@ }; }; -&uart { - status = "okay"; -}; - -&pll { - clocks = <&extosc>; -}; - &spi { status = "okay"; @@ -108,21 +80,6 @@ }; }; -&pcie { - status = "okay"; - - wifi: wifi@0,0 { - reg = <0x0000 0 0 0 0>; - qca,no-eeprom; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; -}; - ð1 { compatible = "syscon", "simple-mfd"; }; diff --git a/target/linux/ath79/dts/ar7241_ubnt_unifi.dtsi b/target/linux/ath79/dts/ar7241_ubnt_unifi.dtsi new file mode 100644 index 0000000000..7bf79f7465 --- /dev/null +++ b/target/linux/ath79/dts/ar7241_ubnt_unifi.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar7241.dtsi" + +#include +#include + +/ { + aliases { + label-mac-device = &wifi; + }; + + extosc: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + + keys { + compatible = "gpio-keys"; + + reset { + linux,code = ; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&pll { + clocks = <&extosc>; +}; + +&pcie { + status = "okay"; + + wifi: wifi@0,0 { + reg = <0x0000 0 0 0 0>; + qca,no-eeprom; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; +}; + diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 2d76d16f9f..cb6765bba5 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -108,7 +108,8 @@ ath79_setup_interfaces() alfa-network,n5q|\ devolo,dvl1200e|\ devolo,dvl1750e|\ - ocedo,ursus) + ocedo,ursus|\ + ubnt,unifi-ap-outdoor-plus) ucidef_set_interface_lan "eth0 eth1" ;; avm,fritz4020|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index d50d8d9f82..552eb406ab 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -74,7 +74,8 @@ case "$FIRMWARE" in avm,fritz300e) caldata_extract_reverse "urloader" 0x1541 0x440 ;; - buffalo,wzr-hp-g302h-a1a0) + buffalo,wzr-hp-g302h-a1a0|\ + ubnt,unifi-ap-outdoor-plus) caldata_extract "art" 0x1000 0xeb8 ;; buffalo,wzr-hp-g450h|\ diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 91a18d3d35..733d803d7a 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -120,6 +120,18 @@ define Device/ubnt-xw UBNT_VERSION := 6.0.4 endef +define Device/ubnt-unifi-jffs2 + $(Device/ubnt) + KERNEL_SIZE := 3072k + IMAGE_SIZE := 15744k + UBNT_TYPE := BZ + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | jffs2 kernel0 + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs |\ + pad-rootfs | append-metadata | check-size + IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2 +endef + define Device/ubnt-acb $(Device/ubnt) IMAGE_SIZE := 15744k @@ -420,19 +432,19 @@ define Device/ubnt_unifiac-pro endef TARGET_DEVICES += ubnt_unifiac-pro +define Device/ubnt_unifi-ap-outdoor-plus + $(Device/ubnt-bz) + $(Device/ubnt-unifi-jffs2) + DEVICE_MODEL := UniFi AP Outdoor+ + SUPPORTED_DEVICES += unifi-outdoor-plus +endef +TARGET_DEVICES += ubnt_unifi-ap-outdoor-plus + define Device/ubnt_unifi-ap-pro + $(Device/ubnt-unifi-jffs2) SOC := ar9344 - DEVICE_VENDOR := Ubiquiti DEVICE_MODEL := UniFi AP Pro - UBNT_TYPE := BZ UBNT_CHIP := ar934x - KERNEL_SIZE := 3072k - IMAGE_SIZE := 15744k - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | jffs2 kernel0 - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs |\ - pad-rootfs | append-metadata | check-size - IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2 SUPPORTED_DEVICES += uap-pro endef TARGET_DEVICES += ubnt_unifi-ap-pro