From: Felix Fietkau <nbd@nbd.name>
Date: Fri, 5 Aug 2016 09:02:50 +0000 (+0200)
Subject: hostapd: remove unused hostapd-common-old package
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=51e70267bd7ba886314f87317f31342f8e39f602;p=openwrt%2Fstaging%2Fnbd.git

hostapd: remove unused hostapd-common-old package

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---

diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile
index 5edea1415e..5caf3e3378 100644
--- a/package/network/services/hostapd/Makefile
+++ b/package/network/services/hostapd/Makefile
@@ -254,12 +254,6 @@ define Package/hostapd-common
   CATEGORY:=Network
 endef
 
-define Package/hostapd-common-old
-  TITLE:=hostapd/wpa_supplicant common support files (legacy drivers)
-  SECTION:=net
-  CATEGORY:=Network
-endef
-
 define Package/eapol-test
   TITLE:=802.1x authentication test utility
   SECTION:=net
@@ -376,12 +370,6 @@ define Package/hostapd-common/install
 	$(INSTALL_DATA) ./files/netifd.sh $(1)/lib/netifd/hostapd.sh
 endef
 
-define Package/hostapd-common-old/install
-	$(INSTALL_DIR) $(1)/lib/wifi
-	$(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh
-	$(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh
-endef
-
 define Package/hostapd/install
 	$(call Install/hostapd,$(1))
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
@@ -439,5 +427,4 @@ $(eval $(call BuildPackage,wpa-supplicant-p2p))
 $(eval $(call BuildPackage,wpa-cli))
 $(eval $(call BuildPackage,hostapd-utils))
 $(eval $(call BuildPackage,hostapd-common))
-$(eval $(call BuildPackage,hostapd-common-old))
 $(eval $(call BuildPackage,eapol-test))
diff --git a/package/network/services/hostapd/files/hostapd.sh b/package/network/services/hostapd/files/hostapd.sh
deleted file mode 100644
index 9c1ba0fa13..0000000000
--- a/package/network/services/hostapd/files/hostapd.sh
+++ /dev/null
@@ -1,399 +0,0 @@
-. /lib/functions/network.sh
-
-hostapd_set_bss_options() {
-	local var="$1"
-	local vif="$2"
-	local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible wpa_key_mgmt
-
-	config_get enc "$vif" encryption "none"
-	config_get wep_rekey        "$vif" wep_rekey        # 300
-	config_get wpa_group_rekey  "$vif" wpa_group_rekey  # 300
-	config_get wpa_pair_rekey   "$vif" wpa_pair_rekey   # 300
-	config_get wpa_master_rekey "$vif" wpa_master_rekey # 640
-	config_get_bool ap_isolate "$vif" isolate 0
-	config_get_bool disassoc_low_ack "$vif" disassoc_low_ack 1
-	config_get max_num_sta "$vif" max_num_sta 0
-	config_get max_inactivity "$vif" max_inactivity 0
-	config_get_bool preamble "$vif" short_preamble 1
-
-	config_get device "$vif" device
-	config_get hwmode "$device" hwmode
-	config_get phy "$device" phy
-
-	append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N"
-
-	if [ "$ap_isolate" -gt 0 ]; then
-		append "$var" "ap_isolate=$ap_isolate" "$N"
-	fi
-	if [ "$max_num_sta" -gt 0 ]; then
-		append "$var" "max_num_sta=$max_num_sta" "$N"
-	fi
-	if [ "$max_inactivity" -gt 0 ]; then
-		append "$var" "ap_max_inactivity=$max_inactivity" "$N"
-	fi
-	append "$var" "disassoc_low_ack=$disassoc_low_ack" "$N"
-	if [ "$preamble" -gt 0 ]; then
-		append "$var" "preamble=$preamble" "$N"
-	fi
-
-	# Examples:
-	# psk-mixed/tkip 	=> WPA1+2 PSK, TKIP
-	# wpa-psk2/tkip+aes	=> WPA2 PSK, CCMP+TKIP
-	# wpa2/tkip+aes 	=> WPA2 RADIUS, CCMP+TKIP
-	# ...
-
-	# TODO: move this parsing function somewhere generic, so that
-	# later it can be reused by drivers that don't use hostapd
-
-	# crypto defaults: WPA2 vs WPA1
-	case "$enc" in
-		wpa2*|*psk2*)
-			wpa=2
-			crypto="CCMP"
-		;;
-		*mixed*)
-			wpa=3
-			crypto="CCMP TKIP"
-		;;
-		*)
-			wpa=1
-			crypto="TKIP"
-		;;
-	esac
-
-	# explicit override for crypto setting
-	case "$enc" in
-		*tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";;
-		*aes|*ccmp) crypto="CCMP";;
-		*tkip) crypto="TKIP";;
-	esac
-
-	# enforce CCMP for 11ng and 11na
-	case "$hwmode:$crypto" in
-		*ng:TKIP|*na:TKIP) crypto="CCMP TKIP";;
-	esac
-
-	# use crypto/auth settings for building the hostapd config
-	case "$enc" in
-		none)
-			wps_possible=1
-			wpa=0
-			crypto=
-			# Here we make the assumption that if we're in open mode
-			# with WPS enabled, we got to be in unconfigured state.
-			wps_not_configured=1
-		;;
-		*psk*)
-			config_get psk "$vif" key
-			if [ ${#psk} -eq 64 ]; then
-				append "$var" "wpa_psk=$psk" "$N"
-			else
-				append "$var" "wpa_passphrase=$psk" "$N"
-			fi
-			wps_possible=1
-			[ -n "$wpa_group_rekey"  ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
-			[ -n "$wpa_pair_rekey"   ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
-			[ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
-			append wpa_key_mgmt "WPA-PSK"
-		;;
-		*wpa*|*8021x*)
-			# required fields? formats?
-			# hostapd is particular, maybe a default configuration for failures
-			config_get auth_server "$vif" auth_server
-			[ -z "$auth_server" ] && config_get auth_server "$vif" server
-			append "$var" "auth_server_addr=$auth_server" "$N"
-			config_get auth_port "$vif" auth_port
-			[ -z "$auth_port" ] && config_get auth_port "$vif" port
-			auth_port=${auth_port:-1812}
-			append "$var" "auth_server_port=$auth_port" "$N"
-			config_get auth_secret "$vif" auth_secret
-			[ -z "$auth_secret" ] && config_get auth_secret "$vif" key
-			append "$var" "auth_server_shared_secret=$auth_secret" "$N"
-			# You don't really want to enable this unless you are doing
-			# some corner case testing or are using OpenWrt as a work around
-			# for some systematic issues.
-			config_get_bool auth_cache "$vif" auth_cache 0
-			config_get rsn_preauth "$vif" rsn_preauth
-			[ "$auth_cache" -gt 0 ] || [[ "$rsn_preauth" = 1 ]] || append "$var" "disable_pmksa_caching=1" "$N"
-			[ "$auth_cache" -gt 0 ] || [[ "$rsn_preauth" = 1 ]] || append "$var" "okc=0" "$N"
-			config_get acct_server "$vif" acct_server
-			[ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N"
-			config_get acct_port "$vif" acct_port
-			[ -n "$acct_port" ] && acct_port=${acct_port:-1813}
-			[ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N"
-			config_get acct_secret "$vif" acct_secret
-			[ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N"
-			config_get eap_reauth_period "$vif" eap_reauth_period
-			[ -n "$eap_reauth_period" ] && append "$var" "eap_reauth_period=$eap_reauth_period" "$N"
-			config_get dae_client "$vif" dae_client
-			config_get dae_secret "$vif" dae_secret
-			[ -n "$dae_client" -a -n "$dae_secret" ] && {
-				config_get dae_port  "$vif" dae_port
-				append "$var" "radius_das_port=${dae_port:-3799}" "$N"
-				append "$var" "radius_das_client=$dae_client $dae_secret" "$N"
-			}
-			config_get ownip "$vif" ownip
-			append "$var" "own_ip_addr=$ownip" "$N"
-			append "$var" "eapol_key_index_workaround=1" "$N"
-			append "$var" "ieee8021x=1" "$N"
-			append wpa_key_mgmt "WPA-EAP"
-			[ -n "$wpa_group_rekey"  ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
-			[ -n "$wpa_pair_rekey"   ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
-			[ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
-		;;
-		*wep*)
-			config_get key "$vif" key
-			key="${key:-1}"
-			case "$key" in
-				[1234])
-					for idx in 1 2 3 4; do
-						local zidx
-						zidx=$(($idx - 1))
-						config_get ckey "$vif" "key${idx}"
-						[ -n "$ckey" ] && \
-							append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N"
-					done
-					append "$var" "wep_default_key=$((key - 1))"  "$N"
-				;;
-				*)
-					append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N"
-					append "$var" "wep_default_key=0" "$N"
-					[ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N"
-				;;
-			esac
-			case "$enc" in
-				*shared*)
-					auth_algs=2
-				;;
-				*mixed*)
-					auth_algs=3
-				;;
-			esac
-			wpa=0
-			crypto=
-		;;
-		*)
-			wpa=0
-			crypto=
-		;;
-	esac
-	append "$var" "auth_algs=${auth_algs:-1}" "$N"
-	append "$var" "wpa=$wpa" "$N"
-	[ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N"
-	[ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
-
-	config_get ssid "$vif" ssid
-	config_get bridge "$vif" bridge
-	config_get ieee80211d "$vif" ieee80211d
-	config_get iapp_interface "$vif" iapp_interface
-
-	config_get_bool wps_pbc "$vif" wps_pushbutton 0
-	config_get_bool wps_label "$vif" wps_label 0
-
-	config_get config_methods "$vif" wps_config
-	[ "$wps_pbc" -gt 0 ] && append config_methods push_button
-
-	[ -n "$wps_possible" -a -n "$config_methods" ] && {
-		config_get device_type "$vif" wps_device_type "6-0050F204-1"
-		config_get device_name "$vif" wps_device_name "Lede AP"
-		config_get manufacturer "$vif" wps_manufacturer "www.lede-project.org"
-		config_get wps_pin "$vif" wps_pin
-
-		config_get_bool ext_registrar "$vif" ext_registrar 0
-		[ "$ext_registrar" -gt 0 -a -n "$bridge" ] && append "$var" "upnp_iface=$bridge" "$N"
-
-		append "$var" "eap_server=1" "$N"
-		[ -n "$wps_pin" ] && append "$var" "ap_pin=$wps_pin" "$N"
-		append "$var" "wps_state=${wps_not_configured:-2}" "$N"
-		append "$var" "ap_setup_locked=0" "$N"
-		append "$var" "device_type=$device_type" "$N"
-		append "$var" "device_name=$device_name" "$N"
-		append "$var" "manufacturer=$manufacturer" "$N"
-		append "$var" "config_methods=$config_methods" "$N"
-	}
-
-	append "$var" "ssid=$ssid" "$N"
-	[ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N"
-	[ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N"
-	[ -n "$iapp_interface" ] && {
-		local ifname
-		network_get_device ifname "$iapp_interface" || ifname = "$iapp_interface"
-		append bss_conf "iapp_interface=$ifname" "$N"
-	}
-
-	if [ "$wpa" -ge "1" ]
-	then
-		config_get nasid "$vif" nasid
-		[ -n "$nasid" ] && append "$var" "nas_identifier=$nasid" "$N"
-
-		config_get_bool ieee80211r "$vif" ieee80211r 0
-		if [ "$ieee80211r" -gt 0 ]
-		then
-			config_get mobility_domain "$vif" mobility_domain "4f57"
-			config_get r0_key_lifetime "$vif" r0_key_lifetime "10000"
-			config_get r1_key_holder "$vif" r1_key_holder "00004f577274"
-			config_get reassociation_deadline "$vif" reassociation_deadline "1000"
-			config_get r0kh "$vif" r0kh
-			config_get r1kh "$vif" r1kh
-			config_get_bool pmk_r1_push "$vif" pmk_r1_push 0
-
-			append "$var" "mobility_domain=$mobility_domain" "$N"
-			append "$var" "r0_key_lifetime=$r0_key_lifetime" "$N"
-			append "$var" "r1_key_holder=$r1_key_holder" "$N"
-			append "$var" "reassociation_deadline=$reassociation_deadline" "$N"
-			append "$var" "pmk_r1_push=$pmk_r1_push" "$N"
-
-			for kh in $r0kh; do
-				"$var" "r0kh=${kh//,/ }" "$N"
-			done
-			for kh in $r1kh; do
-				"$var" "r1kh=${kh//,/ }" "$N"
-			done
-
-			[ "$wpa_key_mgmt" != "${wpa_key_mgmt/EAP/}" ] && append wpa_key_mgmt "FT-EAP"
-			[ "$wpa_key_mgmt" != "${wpa_key_mgmt/PSK/}" ] && append wpa_key_mgmt "FT-PSK"
-		fi
-
-		[ -n "wpa_key_mgmt" ] && append "$var" "wpa_key_mgmt=$wpa_key_mgmt"
-	fi
-
-	if [ "$wpa" -ge "2" ]
-	then
-		# RSN -> allow preauthentication. You have two
-		# options, rsn_preauth for production or rsn_preauth_testing
-		# for validation / testing.
-		if [ -n "$bridge" -a "$rsn_preauth" = 1 ]
-		then
-			append "$var" "rsn_preauth=1" "$N"
-			append "$var" "rsn_preauth_interfaces=$bridge" "$N"
-			append "$var" "okc=1" "$N"
-		else
-			# RSN preauthentication testings hould disable
-			# Opportunistic Key Caching (okc) as otherwise the PMKSA
-			# entry for a test could come from the Opportunistic Key Caching
-			config_get rsn_preauth_testing "$vif" rsn_preauth_testing
-			if [ -n "$bridge" -a "$rsn_preauth_testing" = 1 ]
-			then
-				append "$var" "rsn_preauth=1" "$N"
-				append "$var" "rsn_preauth_interfaces=$bridge" "$N"
-				append "$var" "okc=0" "$N"
-			fi
-		fi
-
-		# RSN -> allow management frame protection
-		config_get ieee80211w "$vif" ieee80211w
-		case "$ieee80211w" in
-			[012])
-				append "$var" "ieee80211w=$ieee80211w" "$N"
-				[ "$ieee80211w" -gt "0" ] && {
-					config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout
-					config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout
-					[ -n "$ieee80211w_max_timeout" ] && \
-						append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
-					[ -n "$ieee80211w_retry_timeout" ] && \
-						append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
-				}
-			;;
-		esac
-	fi
-
-	config_get macfile "$vif" macfile
-	config_get maclist "$vif" maclist
-	if [ -z "$macfile" ]
-	then
-		# if no macfile has been specified, fallback to the default name
-		# and truncate file to avoid aggregating entries over time
-		macfile="/var/run/hostapd-$ifname.maclist"
-		echo "" > "$macfile"
-	else
-		if [ -n "$maclist" ]
-		then
-			# to avoid to overwrite the original file, make a copy
-			# before appending the entries specified by the maclist
-			# option
-			cp $macfile $macfile.maclist
-			macfile=$macfile.maclist
-		fi
-	fi
-
-	if [ -n "$maclist" ]
-	then
-		for mac in $maclist; do
-			echo "$mac" >> $macfile
-		done
-	fi
-
-	config_get macfilter "$vif" macfilter
-	case "$macfilter" in
-		allow)
-			append "$var" "macaddr_acl=1" "$N"
-			append "$var" "accept_mac_file=$macfile" "$N"
-			;;
-		deny)
-			append "$var" "macaddr_acl=0" "$N"
-			append "$var" "deny_mac_file=$macfile" "$N"
-			;;
-	esac
-}
-
-hostapd_set_log_options() {
-	local var="$1"
-	local cfg="$2"
-	local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
-
-	config_get log_level "$cfg" log_level 2
-
-	config_get_bool log_80211  "$cfg" log_80211  1
-	config_get_bool log_8021x  "$cfg" log_8021x  1
-	config_get_bool log_radius "$cfg" log_radius 1
-	config_get_bool log_wpa    "$cfg" log_wpa    1
-	config_get_bool log_driver "$cfg" log_driver 1
-	config_get_bool log_iapp   "$cfg" log_iapp   1
-	config_get_bool log_mlme   "$cfg" log_mlme   1
-
-	local log_mask=$((       \
-		($log_80211  << 0) | \
-		($log_8021x  << 1) | \
-		($log_radius << 2) | \
-		($log_wpa    << 3) | \
-		($log_driver << 4) | \
-		($log_iapp   << 5) | \
-		($log_mlme   << 6)   \
-	))
-
-	append "$var" "logger_syslog=$log_mask" "$N"
-	append "$var" "logger_syslog_level=$log_level" "$N"
-	append "$var" "logger_stdout=$log_mask" "$N"
-	append "$var" "logger_stdout_level=$log_level" "$N"
-}
-
-hostapd_setup_vif() {
-	local vif="$1"
-	local driver="$2"
-	local ifname device channel hwmode
-
-	hostapd_cfg=
-
-	config_get ifname "$vif" ifname
-	config_get device "$vif" device
-	config_get channel "$device" channel
-	config_get hwmode "$device" hwmode
-
-	hostapd_set_log_options hostapd_cfg "$device"
-	hostapd_set_bss_options hostapd_cfg "$vif"
-
-	case "$hwmode" in
-		*bg|*gdt|*gst|*fh) hwmode=g;;
-		*adt|*ast) hwmode=a;;
-	esac
-	[ "$channel" = auto ] && channel=
-	[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
-	cat > /var/run/hostapd-$ifname.conf <<EOF
-driver=$driver
-interface=$ifname
-${hwmode:+hw_mode=${hwmode#11}}
-${channel:+channel=$channel}
-$hostapd_cfg
-EOF
-	hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf
-}
diff --git a/package/network/services/hostapd/files/wpa_supplicant.sh b/package/network/services/hostapd/files/wpa_supplicant.sh
deleted file mode 100644
index b6784843e8..0000000000
--- a/package/network/services/hostapd/files/wpa_supplicant.sh
+++ /dev/null
@@ -1,194 +0,0 @@
-wpa_supplicant_setup_vif() {
-	local vif="$1"
-	local driver="$2"
-	local key="$key"
-	local options="$3"
-	local freq=""
-	local ht="$5"
-	local ap_scan=""
-	local scan_ssid="1"
-	[ -n "$4" ] && freq="frequency=$4"
-
-	config_get enc "$vif" encryption
-	config_get key "$vif" key
-
-	local net_cfg bridge
-	config_get bridge "$vif" bridge
-	[ -z "$bridge" ] && {
-		net_cfg="$(find_net_config "$vif")"
-		[ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
-		config_set "$vif" bridge "$bridge"
-	}
-
-	local mode ifname wds modestr=""
-	config_get mode "$vif" mode
-	config_get ifname "$vif" ifname
-	config_get_bool wds "$vif" wds 0
-	[ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || {
-		echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface"
-		return 1
-	}
-	[ "$mode" = "adhoc" ] && {
-		modestr="mode=1"
-		scan_ssid="0"
-		ap_scan="ap_scan=2"
-	}
-
-	key_mgmt='NONE'
-	case "$enc" in
-		*none*) ;;
-		*wep*)
-			config_get key "$vif" key
-			key="${key:-1}"
-			case "$key" in
-				[1234])
-					for idx in 1 2 3 4; do
-						local zidx
-						zidx=$(($idx - 1))
-						config_get ckey "$vif" "key${idx}"
-						[ -n "$ckey" ] && \
-							append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
-					done
-					wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
-				;;
-				*)
-					wep_key0="wep_key0=$(prepare_key_wep "$key")"
-					wep_tx_keyidx="wep_tx_keyidx=0"
-				;;
-			esac
-		;;
-		*psk*)
-			key_mgmt='WPA-PSK'
-			# if you want to use PSK with a non-nl80211 driver you
-			# have to use WPA-NONE and wext driver for wpa_s
-			[ "$mode" = "adhoc" -a "$driver" != "nl80211" ] && {
-				key_mgmt='WPA-NONE'
-				driver='wext'
-			}
-			if [ ${#key} -eq 64 ]; then
-				passphrase="psk=${key}"
-			else
-				passphrase="psk=\"${key}\""
-			fi
-			case "$enc" in
-				*psk2*)
-					proto='proto=RSN'
-					config_get ieee80211w "$vif" ieee80211w
-				;;
-				*psk*)
-					proto='proto=WPA'
-				;;
-			esac
-		;;
-		*wpa*|*8021x*)
-			proto='proto=WPA2'
-			key_mgmt='WPA-EAP'
-			config_get ieee80211w "$vif" ieee80211w
-			config_get ca_cert "$vif" ca_cert
-			config_get eap_type "$vif" eap_type
-			ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
-			case "$eap_type" in
-				tls)
-					pairwise='pairwise=CCMP'
-					group='group=CCMP'
-					config_get identity "$vif" identity
-					config_get client_cert "$vif" client_cert
-					config_get priv_key "$vif" priv_key
-					config_get priv_key_pwd "$vif" priv_key_pwd
-					identity="identity=\"$identity\""
-					client_cert="client_cert=\"$client_cert\""
-					priv_key="private_key=\"$priv_key\""
-					priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
-				;;
-				peap|ttls)
-					config_get auth "$vif" auth
-					config_get identity "$vif" identity
-					config_get password "$vif" password
-					phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
-					identity="identity=\"$identity\""
-					password="${password:+password=\"$password\"}"
-				;;
-			esac
-			eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
-		;;
-	esac
-
-	case "$ieee80211w" in
-		[012])
-			ieee80211w="ieee80211w=$ieee80211w"
-		;;
-	esac
-
-	local fixed_freq bssid1 beacon_int brates mrate
-	config_get ifname "$vif" ifname
-	config_get bridge "$vif" bridge
-	config_get ssid "$vif" ssid
-	config_get bssid "$vif" bssid
-	bssid1=${bssid:+"bssid=$bssid"}
-	beacon_int=${beacon_int:+"beacon_int=$beacon_int"}
-
-	local br brval brsub brstr
-	[ -n "$basic_rate_list" ] && {
-		for br in $basic_rate_list; do
-			brval="$(($br / 1000))"
-			brsub="$((($br / 100) % 10))"
-			[ "$brsub" -gt 0 ] && brval="$brval.$brsub"
-			[ -n "$brstr" ] && brstr="$brstr,"
-			brstr="$brstr$brval"
-		done
-		brates=${basic_rate_list:+"rates=$brstr"}
-	}
-
-	local mcval=""
-	[ -n "$mcast_rate" ] && {
-		mcval="$(($mcast_rate / 1000))"
-		mcsub="$(( ($mcast_rate / 100) % 10 ))"
-		[ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
-		mrate=${mcast_rate:+"mcast_rate=$mcval"}
-	}
-
-	local ht_str
-	[ -n "$ht" ] && ht_str="htmode=$ht"
-
-	rm -rf /var/run/wpa_supplicant-$ifname
-	cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
-ctrl_interface=/var/run/wpa_supplicant-$ifname
-$ap_scan
-network={
-	$modestr
-	scan_ssid=$scan_ssid
-	ssid="$ssid"
-	$bssid1
-	key_mgmt=$key_mgmt
-	$proto
-	$freq
-	${fixed:+"fixed_freq=1"}
-	$beacon_int
-	$brates
-	$mrate
-	$ht_str
-	$ieee80211w
-	$passphrase
-	$pairwise
-	$group
-	$eap_type
-	$ca_cert
-	$client_cert
-	$priv_key
-	$priv_key_pwd
-	$phase2
-	$identity
-	$password
-	$wep_key0
-	$wep_key1
-	$wep_key2
-	$wep_key3
-	$wep_tx_keyidx
-}
-EOF
-	if [ -n "$proto" -o "$key_mgmt" = "NONE" ]; then
-		wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf $options
-	else
-		return 0
-	fi
-}