From: huang lin Date: Tue, 17 Nov 2015 06:20:11 +0000 (+0800) Subject: rockchip: rename board-spl.c to rk3288-board-spl.c X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5138337b3ff20380d2a62eccb63fdfd05f51982b;p=project%2Fbcm63xx%2Fu-boot.git rockchip: rename board-spl.c to rk3288-board-spl.c since different rockchip soc need different spl file, so rename board-spl.c. Signed-off-by: Lin Huang Acked-by: Simon Glass --- diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index abe03a88a6..7088711ee3 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -5,7 +5,7 @@ # ifdef CONFIG_SPL_BUILD -obj-y += board-spl.o +obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o else obj-y += board.o endif diff --git a/arch/arm/mach-rockchip/board-spl.c b/arch/arm/mach-rockchip/board-spl.c deleted file mode 100644 index 0426adf6b7..0000000000 --- a/arch/arm/mach-rockchip/board-spl.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * (C) Copyright 2015 Google, Inc - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -u32 spl_boot_device(void) -{ - const void *blob = gd->fdt_blob; - struct udevice *dev; - const char *bootdev; - int node; - int ret; - - bootdev = fdtdec_get_config_string(blob, "u-boot,boot0"); - debug("Boot device %s\n", bootdev); - if (!bootdev) - goto fallback; - - node = fdt_path_offset(blob, bootdev); - if (node < 0) { - debug("node=%d\n", node); - goto fallback; - } - ret = device_get_global_by_of_offset(node, &dev); - if (ret) { - debug("device at node %s/%d not found: %d\n", bootdev, node, - ret); - goto fallback; - } - debug("Found device %s\n", dev->name); - switch (device_get_uclass_id(dev)) { - case UCLASS_SPI_FLASH: - return BOOT_DEVICE_SPI; - case UCLASS_MMC: - return BOOT_DEVICE_MMC1; - default: - debug("Booting from device uclass '%s' not supported\n", - dev_get_uclass_name(dev)); - } - -fallback: - return BOOT_DEVICE_MMC1; -} - -u32 spl_boot_mode(void) -{ - return MMCSD_MODE_RAW; -} - -/* read L2 control register (L2CTLR) */ -static inline uint32_t read_l2ctlr(void) -{ - uint32_t val = 0; - - asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val)); - - return val; -} - -/* write L2 control register (L2CTLR) */ -static inline void write_l2ctlr(uint32_t val) -{ - /* - * Note: L2CTLR can only be written when the L2 memory system - * is idle, ie before the MMU is enabled. - */ - asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory"); - isb(); -} - -static void configure_l2ctlr(void) -{ - uint32_t l2ctlr; - - l2ctlr = read_l2ctlr(); - l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */ - - /* - * Data RAM write latency: 2 cycles - * Data RAM read latency: 2 cycles - * Data RAM setup latency: 1 cycle - * Tag RAM write latency: 1 cycle - * Tag RAM read latency: 1 cycle - * Tag RAM setup latency: 1 cycle - */ - l2ctlr |= (1 << 3 | 1 << 0); - write_l2ctlr(l2ctlr); -} - -static int configure_emmc(struct udevice *pinctrl) -{ - struct gpio_desc desc; - int ret; - - pinctrl_request_noflags(pinctrl, PERIPH_ID_EMMC); - - /* - * TODO(sjg@chromium.org): Pick this up from device tree or perhaps - * use the EMMC_PWREN setting. - */ - ret = dm_gpio_lookup_name("D9", &desc); - if (ret) { - debug("gpio ret=%d\n", ret); - return ret; - } - ret = dm_gpio_request(&desc, "emmc_pwren"); - if (ret) { - debug("gpio_request ret=%d\n", ret); - return ret; - } - ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); - if (ret) { - debug("gpio dir ret=%d\n", ret); - return ret; - } - ret = dm_gpio_set_value(&desc, 1); - if (ret) { - debug("gpio value ret=%d\n", ret); - return ret; - } - - return 0; -} - -void board_init_f(ulong dummy) -{ - struct udevice *pinctrl; - struct udevice *dev; - int ret; - - /* Example code showing how to enable the debug UART on RK3288 */ -#ifdef EARLY_UART -#include - /* Enable early UART on the RK3288 */ -#define GRF_BASE 0xff770000 - struct rk3288_grf * const grf = (void *)GRF_BASE; - - rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT | - GPIO7C6_MASK << GPIO7C6_SHIFT, - GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT | - GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT); - /* - * Debug UART can be used from here if required: - * - * debug_uart_init(); - * printch('a'); - * printhex8(0x1234); - * printascii("string"); - */ - debug_uart_init(); -#endif - - ret = spl_init(); - if (ret) { - debug("spl_init() failed: %d\n", ret); - hang(); - } - - rockchip_timer_init(); - configure_l2ctlr(); - - ret = uclass_get_device(UCLASS_CLK, 0, &dev); - if (ret) { - debug("CLK init failed: %d\n", ret); - return; - } - - ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); - if (ret) { - debug("Pinctrl init failed: %d\n", ret); - return; - } - - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) { - debug("DRAM init failed: %d\n", ret); - return; - } - - /* - * Now that DRAM is initialized setup base pointer for simple malloc - * into RAM. - */ - gd->malloc_base = CONFIG_SPL_STACK_R_ADDR; - gd->malloc_ptr = 0; -} - -static int setup_led(void) -{ -#ifdef CONFIG_SPL_LED - struct udevice *dev; - char *led_name; - int ret; - - led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); - if (!led_name) - return 0; - ret = led_get_by_label(led_name, &dev); - if (ret) { - debug("%s: get=%d\n", __func__, ret); - return ret; - } - ret = led_set_on(dev, 1); - if (ret) - return ret; -#endif - - return 0; -} - -void spl_board_init(void) -{ - struct udevice *pinctrl; - int ret; - - ret = setup_led(); - - if (ret) { - debug("LED ret=%d\n", ret); - hang(); - } - - ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); - if (ret) { - debug("%s: Cannot find pinctrl device\n", __func__); - goto err; - } - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); - if (ret) { - debug("%s: Failed to set up SD card\n", __func__); - goto err; - } - ret = configure_emmc(pinctrl); - if (ret) { - debug("%s: Failed to set up eMMC\n", __func__); - goto err; - } - - /* Enable debug UART */ - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); - if (ret) { - debug("%s: Failed to set up console UART\n", __func__); - goto err; - } - - preloader_console_init(); - return; -err: - printf("spl_board_init: Error %d\n", ret); - - /* No way to report error here */ - hang(); -} diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c new file mode 100644 index 0000000000..0426adf6b7 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -0,0 +1,277 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +u32 spl_boot_device(void) +{ + const void *blob = gd->fdt_blob; + struct udevice *dev; + const char *bootdev; + int node; + int ret; + + bootdev = fdtdec_get_config_string(blob, "u-boot,boot0"); + debug("Boot device %s\n", bootdev); + if (!bootdev) + goto fallback; + + node = fdt_path_offset(blob, bootdev); + if (node < 0) { + debug("node=%d\n", node); + goto fallback; + } + ret = device_get_global_by_of_offset(node, &dev); + if (ret) { + debug("device at node %s/%d not found: %d\n", bootdev, node, + ret); + goto fallback; + } + debug("Found device %s\n", dev->name); + switch (device_get_uclass_id(dev)) { + case UCLASS_SPI_FLASH: + return BOOT_DEVICE_SPI; + case UCLASS_MMC: + return BOOT_DEVICE_MMC1; + default: + debug("Booting from device uclass '%s' not supported\n", + dev_get_uclass_name(dev)); + } + +fallback: + return BOOT_DEVICE_MMC1; +} + +u32 spl_boot_mode(void) +{ + return MMCSD_MODE_RAW; +} + +/* read L2 control register (L2CTLR) */ +static inline uint32_t read_l2ctlr(void) +{ + uint32_t val = 0; + + asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val)); + + return val; +} + +/* write L2 control register (L2CTLR) */ +static inline void write_l2ctlr(uint32_t val) +{ + /* + * Note: L2CTLR can only be written when the L2 memory system + * is idle, ie before the MMU is enabled. + */ + asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory"); + isb(); +} + +static void configure_l2ctlr(void) +{ + uint32_t l2ctlr; + + l2ctlr = read_l2ctlr(); + l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */ + + /* + * Data RAM write latency: 2 cycles + * Data RAM read latency: 2 cycles + * Data RAM setup latency: 1 cycle + * Tag RAM write latency: 1 cycle + * Tag RAM read latency: 1 cycle + * Tag RAM setup latency: 1 cycle + */ + l2ctlr |= (1 << 3 | 1 << 0); + write_l2ctlr(l2ctlr); +} + +static int configure_emmc(struct udevice *pinctrl) +{ + struct gpio_desc desc; + int ret; + + pinctrl_request_noflags(pinctrl, PERIPH_ID_EMMC); + + /* + * TODO(sjg@chromium.org): Pick this up from device tree or perhaps + * use the EMMC_PWREN setting. + */ + ret = dm_gpio_lookup_name("D9", &desc); + if (ret) { + debug("gpio ret=%d\n", ret); + return ret; + } + ret = dm_gpio_request(&desc, "emmc_pwren"); + if (ret) { + debug("gpio_request ret=%d\n", ret); + return ret; + } + ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); + if (ret) { + debug("gpio dir ret=%d\n", ret); + return ret; + } + ret = dm_gpio_set_value(&desc, 1); + if (ret) { + debug("gpio value ret=%d\n", ret); + return ret; + } + + return 0; +} + +void board_init_f(ulong dummy) +{ + struct udevice *pinctrl; + struct udevice *dev; + int ret; + + /* Example code showing how to enable the debug UART on RK3288 */ +#ifdef EARLY_UART +#include + /* Enable early UART on the RK3288 */ +#define GRF_BASE 0xff770000 + struct rk3288_grf * const grf = (void *)GRF_BASE; + + rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT | + GPIO7C6_MASK << GPIO7C6_SHIFT, + GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT | + GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT); + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + debug_uart_init(); +#endif + + ret = spl_init(); + if (ret) { + debug("spl_init() failed: %d\n", ret); + hang(); + } + + rockchip_timer_init(); + configure_l2ctlr(); + + ret = uclass_get_device(UCLASS_CLK, 0, &dev); + if (ret) { + debug("CLK init failed: %d\n", ret); + return; + } + + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + debug("Pinctrl init failed: %d\n", ret); + return; + } + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } + + /* + * Now that DRAM is initialized setup base pointer for simple malloc + * into RAM. + */ + gd->malloc_base = CONFIG_SPL_STACK_R_ADDR; + gd->malloc_ptr = 0; +} + +static int setup_led(void) +{ +#ifdef CONFIG_SPL_LED + struct udevice *dev; + char *led_name; + int ret; + + led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); + if (!led_name) + return 0; + ret = led_get_by_label(led_name, &dev); + if (ret) { + debug("%s: get=%d\n", __func__, ret); + return ret; + } + ret = led_set_on(dev, 1); + if (ret) + return ret; +#endif + + return 0; +} + +void spl_board_init(void) +{ + struct udevice *pinctrl; + int ret; + + ret = setup_led(); + + if (ret) { + debug("LED ret=%d\n", ret); + hang(); + } + + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + debug("%s: Cannot find pinctrl device\n", __func__); + goto err; + } + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); + if (ret) { + debug("%s: Failed to set up SD card\n", __func__); + goto err; + } + ret = configure_emmc(pinctrl); + if (ret) { + debug("%s: Failed to set up eMMC\n", __func__); + goto err; + } + + /* Enable debug UART */ + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); + if (ret) { + debug("%s: Failed to set up console UART\n", __func__); + goto err; + } + + preloader_console_init(); + return; +err: + printf("spl_board_init: Error %d\n", ret); + + /* No way to report error here */ + hang(); +}