From: Eugene Konev <ejka@imfi.kspu.ru>
Date: Sun, 18 Mar 2007 16:00:28 +0000 (+0000)
Subject: Add forgotten part of vlynq irq setup
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=510db3b0a690896c99c8d48e4dc4efef0d216336;p=openwrt%2Fstaging%2Frobimarko.git

Add forgotten part of vlynq irq setup

SVN-Revision: 6606
---

diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c b/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c
index eb32de031c..a32ea8d44c 100644
--- a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c
+++ b/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <asm/ar7/vlynq.h>
 
 #define VLYNQ_PCI_SLOTS 2
@@ -61,6 +62,7 @@ static struct vlynq_pci_config known_devices[] = {
 			{ .size = 0x0, .offset = 0x0 },
 		},
 		.irq = 0, .chip = 0x9066104c,
+		.irq_type = IRQ_TYPE_EDGE_RISING,
 		.class = PCI_CLASS_NETWORK_OTHER,
 		.num_regs = 5,
 		.regs = { 
@@ -313,6 +315,8 @@ static int vlynq_pci_probe(struct vlynq_device *dev)
 	vlynq_set_local_mapping(dev, dev->mem_start, mapping);
 	vlynq_set_remote_mapping(dev, 0, config->rx_mapping);
 
+	set_irq_type(vlynq_virq_to_irq(dev, config->irq), config->irq_type);
+
 	addr = (u32)ioremap_nocache(dev->mem_start, 0x10000);
 	if (!addr) {
 		printk(KERN_ERR "%s: failed to remap io memory\n",
diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c b/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c
index 80cb836d9a..e0d3b1ffe2 100644
--- a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c
+++ b/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c
@@ -117,7 +117,7 @@ static void vlynq_irq_unmask(unsigned int irq)
 	BUG_ON(!dev);
 	virq = irq - dev->irq_start;
 	val = dev->remote->int_device[virq >> 2];
-	val |= VINT_ENABLE << VINT_OFFSET(virq);
+	val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
 	dev->remote->int_device[virq >> 2] = val;
 }