From: Bellido Nicolas <ml@acolin.be>
Date: Fri, 28 Oct 2005 15:51:44 +0000 (+0100)
Subject: [ARM] 3042/1: AAED-2000 - LCD panel informations
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=50f4c001bc1534db77663592496204ceba151e97;p=openwrt%2Fstaging%2Fblogic.git

[ARM] 3042/1: AAED-2000 - LCD panel informations

Patch from Bellido Nicolas

The AAED-2000 is equiped with an 640x480 LCD.
This adds the parameters that will be passed to the AAEC-2000 platform code.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 7b0a1c7d64a9..f5ef69702296 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -31,11 +31,53 @@
 
 #include "core.h"
 
+static void aaed2000_clcd_disable(struct clcd_fb *fb)
+{
+	AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
+}
+
+static void aaed2000_clcd_enable(struct clcd_fb *fb)
+{
+	AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
+}
+
+struct aaec2000_clcd_info clcd_info = {
+	.enable = aaed2000_clcd_enable,
+	.disable = aaed2000_clcd_disable,
+	.panel = {
+		.mode	= {
+			.name		= "Sharp",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39721,
+			.left_margin	= 20,
+			.right_margin	= 44,
+			.upper_margin	= 21,
+			.lower_margin	= 34,
+			.hsync_len	= 96,
+			.vsync_len	= 2,
+			.sync		= 0,
+			.vmode	= FB_VMODE_NONINTERLACED,
+		},
+		.width	= -1,
+		.height	= -1,
+		.tim2	= TIM2_IVS | TIM2_IHS,
+		.cntl	= CNTL_LCDTFT,
+		.bpp	= 16,
+	},
+};
+
 static void __init aaed2000_init_irq(void)
 {
 	aaec2000_init_irq();
 }
 
+static void __init aaed2000_init(void)
+{
+	aaec2000_set_clcd_plat_data(&clcd_info);
+}
+
 static struct map_desc aaed2000_io_desc[] __initdata = {
   { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
 };
@@ -54,4 +96,5 @@ MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
 	.map_io		= aaed2000_map_io,
 	.init_irq	= aaed2000_init_irq,
 	.timer		= &aaec2000_timer,
+	.init_machine	= aaed2000_init,
 MACHINE_END