From: Gabor Juhos Date: Sat, 30 Jun 2007 15:21:35 +0000 (+0000) Subject: Oops! I've copied r7557 instead of r7757, sorry X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5074eb5ac713242afa6e3899bcc8c3652c8f896b;p=openwrt%2Fstaging%2Fjow.git Oops! I've copied r7557 instead of r7757, sorry SVN-Revision: 7799 --- diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch deleted file mode 100644 index 70129373f8..0000000000 --- a/target/linux/adm5120-2.6/patches/001-adm5120.patch +++ /dev/null @@ -1,89 +0,0 @@ -diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig ---- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100 -@@ -12,6 +12,21 @@ - prompt "System type" - default SGI_IP22 - -+config MIPS_ADM5120 -+ bool "Support for ADM5120 SoC" -+ select SYS_HAS_CPU_MIPS32_R1 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select GENERIC_GPIO -+ -+config PCI_ADM5120 -+ bool "Add PCI control support for ADM5120" -+ depends on MIPS_ADM5120 && PCI -+ - config MIPS_MTX1 - bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT -diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile ---- linux-2.6.19.2/arch/mips/Makefile 2007-01-23 14:02:57.000000000 +0100 -+++ linux-2.6.19.2.new/arch/mips/Makefile 2007-01-23 14:49:39.000000000 +0100 -@@ -165,6 +165,14 @@ - load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 - - # -+# ADMtek 5120 -+# -+ -+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/ -+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120 -+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000 -+ -+# - # Common Alchemy Au1x00 stuff - # - core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ -diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h ---- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100 -@@ -212,6 +212,42 @@ - #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ - #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - -+/* -+ * Valid machtype for group ADMtek ADM5120 -+ */ -+#define MACH_GROUP_ADM5120 23 -+#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */ -+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ -+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */ -+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */ -+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */ -+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */ -+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */ -+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */ -+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */ -+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */ -+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */ -+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */ -+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */ -+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */ -+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */ -+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */ -+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */ -+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */ -+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */ -+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */ -+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */ -+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */ -+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */ -+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */ -+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */ -+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */ -+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */ -+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */ -+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */ -+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */ -+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch deleted file mode 100644 index 503a49567c..0000000000 --- a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch +++ /dev/null @@ -1,25 +0,0 @@ -diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig ---- linux-2.6.19.2/drivers/mtd/maps/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -622,5 +622,10 @@ - - This selection automatically selects the map_ram driver. - -+config MTD_ADM5120 -+ tristate "Map driver for ADMtek ADM5120 boards" -+ depends on MIPS_ADM5120 -+ select MTD_CFI_AMDSTD -+ - endmenu - -diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile ---- linux-2.6.19.2/drivers/mtd/maps/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile 2007-01-23 01:20:52.000000000 +0100 -@@ -43,6 +43,7 @@ - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o - obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o -+obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o - obj-$(CONFIG_MTD_LASAT) += lasat.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch deleted file mode 100644 index f6fec30bca..0000000000 --- a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch +++ /dev/null @@ -1,25 +0,0 @@ -diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig ---- linux-2.6.19.2/drivers/net/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/net/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -450,6 +450,10 @@ - If you have an Alchemy Semi AU1X00 based system - say Y. Otherwise, say N. - -+config MIPS_ADM5120_ENET -+ tristate "MIPS ADM5120 Ethernet switch support" -+ depends on NET_ETHERNET && MIPS_ADM5120 -+ - config NET_SB1250_MAC - tristate "SB1250 Ethernet support" - depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC -diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile ---- linux-2.6.19.2/drivers/net/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/net/Makefile 2007-01-23 01:13:39.000000000 +0100 -@@ -164,6 +164,7 @@ - # This is also a 82596 and should probably be merged - obj-$(CONFIG_LP486E) += lp486e.o - -+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o - obj-$(CONFIG_ETH16I) += eth16i.o - obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o - obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch deleted file mode 100644 index 6f2ef7bb36..0000000000 --- a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch +++ /dev/null @@ -1,50 +0,0 @@ -diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig ---- linux-2.6.19.2/drivers/serial/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -246,6 +246,22 @@ - - comment "Non-8250 serial port support" - -+config SERIAL_ADM5120 -+ bool "ADM5120 serial port support" -+ depends on MIPS_ADM5120 -+ select SERIAL_CORE -+ select SERIAL_CORE_CONSOLE -+ help -+ Driver for the on chip UARTs on the ADM5120 SoC -+ -+config ADM5120_NR_UARTS -+ int "Maximum number of ADM5120 serial ports" -+ depends on SERIAL_ADM5120 -+ default "2" -+ ---help--- -+ Set this to the number of serial ports you want the driver to -+ support. -+ - config SERIAL_AMBA_PL010 - tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) -diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile ---- linux-2.6.19.2/drivers/serial/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/serial/Makefile 2007-01-23 01:21:45.000000000 +0100 -@@ -20,6 +20,7 @@ - obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o - obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o - obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o -+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o - obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o - obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o - obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o -diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h ---- linux-2.6.19.2/include/linux/serial_core.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/include/linux/serial_core.h 2007-01-23 01:13:39.000000000 +0100 -@@ -133,6 +133,9 @@ - #define PORT_S3C2412 73 - - -+/* ADMtek ADM5120 SoC */ -+#define PORT_ADM5120 68 -+ - #ifdef __KERNEL__ - - #include diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch deleted file mode 100644 index 40e4fbedf4..0000000000 --- a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch +++ /dev/null @@ -1,53 +0,0 @@ -diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c ---- linux-2.6.19.2/drivers/usb/core/hub.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c 2007-01-23 01:13:39.000000000 +0100 -@@ -2156,6 +2156,8 @@ - USB_DT_DEVICE << 8, 0, - buf, GET_DESCRIPTOR_BUFSIZE, - (i ? USB_CTRL_GET_TIMEOUT : 1000)); -+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0, -+buf->bDescriptorType, USB_DT_DEVICE); - switch (buf->bMaxPacketSize0) { - case 8: case 16: case 32: case 64: case 255: - if (buf->bDescriptorType == -diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig ---- linux-2.6.19.2/drivers/usb/host/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -192,3 +192,6 @@ - To compile this driver as a module, choose M here: the - module will be called "sl811_cs". - -+config USB_ADM5120_HCD -+ tristate "ADM5120 HCD support" -+ depends on USB && MIPS_ADM5120 -diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile ---- linux-2.6.19.2/drivers/usb/host/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile 2007-01-23 01:13:39.000000000 +0100 -@@ -16,3 +16,4 @@ - obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o - obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o - obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o -+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o -diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig ---- linux-2.6.19.2/drivers/usb/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -91,8 +91,6 @@ - - source "drivers/usb/net/Kconfig" - --source "drivers/usb/mon/Kconfig" -- - comment "USB port drivers" - depends on USB - -diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile ---- linux-2.6.19.2/drivers/usb/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/Makefile 2007-01-23 01:22:18.000000000 +0100 -@@ -17,6 +17,7 @@ - obj-$(CONFIG_USB_U132_HCD) += host/ - obj-$(CONFIG_ETRAX_USB_HOST) += host/ - obj-$(CONFIG_USB_OHCI_AT91) += host/ -+obj-$(CONFIG_USB_ADM5120_HCD) += host/ - - obj-$(CONFIG_USB_ACM) += class/ - obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch deleted file mode 100644 index 593743d7ba..0000000000 --- a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch +++ /dev/null @@ -1,25 +0,0 @@ -diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig ---- linux-2.6.19.2/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/char/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -1034,7 +1034,9 @@ - The mmtimer device allows direct userspace access to the - Altix system timer. - --source "drivers/char/tpm/Kconfig" -+config ADM5120_GPIO -+ tristate "ADM5120 GPIO" -+ depends on MIPS_ADM5120 - - config TELCLOCK - tristate "Telecom clock driver for MPBL0010 ATCA SBC" -diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile ---- linux-2.6.19.2/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/char/Makefile 2007-01-23 01:20:01.000000000 +0100 -@@ -90,6 +90,7 @@ - obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o - obj-$(CONFIG_TANBAC_TB0219) += tb0219.o - obj-$(CONFIG_TELCLOCK) += tlclk.o -+obj-$(CONFIG_ADM5120_GPIO) += adm5120_gpio.o - - obj-$(CONFIG_WATCHDOG) += watchdog/ - obj-$(CONFIG_MWAVE) += mwave/ diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch deleted file mode 100644 index 25ec59a390..0000000000 --- a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -urN linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-adm5120/arch/mips/pci/Makefile ---- linux-2.6.21.1/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.21.1-adm5120/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100 -@@ -53,3 +53,4 @@ - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o -+obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o ---- linux-2.6.21.1.old/include/linux/pci_ids.h 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1/include/linux/pci_ids.h 2007-05-31 09:36:56.000000000 +0200 -@@ -1701,6 +1701,9 @@ - #define PCI_VENDOR_ID_ESDGMBH 0x12fe - #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 - -+#define PCI_VENDOR_ID_ADMTEK 0x1317 -+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 -+ - #define PCI_VENDOR_ID_SIIG 0x131f - #define PCI_SUBVENDOR_ID_SIIG 0x131f - #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch deleted file mode 100644 index 81ec37d05f..0000000000 --- a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch +++ /dev/null @@ -1,37 +0,0 @@ -diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig ---- linux-2.6.19.2/drivers/mtd/Kconfig.old 2007-03-25 08:13:02.000000000 +0200 -+++ linux-2.6.19.2/drivers/mtd/Kconfig 2007-03-26 13:37:47.000000000 +0200 -@@ -157,6 +157,22 @@ - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_MYLOADER_PARTS -+ tristate "MyLoader partition parsing" -+ depends on MIPS_ADM5120 && MTD_PARTITIONS -+ ---help--- -+ MyLoader is a bootloader which allows the user to define partitions -+ in flash devices, by putting a table in the second erase block -+ on the device, similar to a partition table. This table gives the -+ offsets and lengths of the user defined partitions. -+ -+ If you need code which can detect and parse these tables, and -+ register MTD 'partitions' corresponding to each image detected, -+ enable this option. -+ -+ You will still need the parsing functions to be called by the driver -+ for your particular device. It won't happen automatically. -+ - comment "User Modules And Translation Layers" - depends on MTD - -diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile ---- linux-2.6.19.2/drivers/mtd/Makefile.old 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2/drivers/mtd/Makefile 2007-03-26 13:28:23.000000000 +0200 -@@ -12,6 +12,7 @@ - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch b/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch deleted file mode 100755 index 754a91e09f..0000000000 --- a/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old 2007-01-11 03:10:36.000000000 +0800 -+++ linux-2.6.19.2/drivers/mtd/chips/Kconfig 2007-03-29 14:43:32.000000000 +0800 -@@ -199,6 +199,14 @@ - provides support for one of those command sets, used on chips - including the AMD Am29LV320. - -+config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT -+ bool "Force bottom boot for Macronix flash chips" -+ depends on MTD_CFI_AMDSTD -+ help -+ Some Macronix flash chips have wrong CFI info, and the driver may -+ detect the type incorrectly. Select this if the chip part number -+ ends with BTC. -+ - config MTD_CFI_STAA - tristate "Support for ST (Advanced Architecture) flash chips" - depends on MTD_GEN_PROBE ---- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old 2007-03-22 16:14:56.000000000 +0800 -+++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-29 14:07:28.000000000 +0800 -@@ -320,6 +320,11 @@ - cfi_tell_features(extp); - #endif - -+#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT -+ extp->TopBottom = 2; -+ bootloc = extp->TopBottom; -+#endif -+ - bootloc = extp->TopBottom; - if ((bootloc != 2) && (bootloc != 3)) { - printk(KERN_WARNING "%s: CFI does not contain boot " diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch deleted file mode 100644 index 23f377c90b..0000000000 --- a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S ---- linux.old/arch/mips/kernel/head.S 2006-12-06 17:30:27.000000000 +0100 -+++ linux.dev/arch/mips/kernel/head.S 2006-12-06 18:34:43.000000000 +0100 -@@ -129,15 +129,20 @@ - #endif - .endm - -- - j kernel_entry - nop -- -+ nop -+ - /* - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. -+ * Use as temporary storage for the kernel command line, so that it -+ * can be updated easily without having to relink the kernel. - */ -- .align 10 -+ -+EXPORT(_image_cmdline) -+ .ascii "CMDLINE:" -+ .align 10 - - EXPORT(stext) # used for profiling - EXPORT(_stext) diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch deleted file mode 100644 index 05beb20241..0000000000 --- a/target/linux/adm5120-2.6/patches/500-Nand.patch +++ /dev/null @@ -1,29 +0,0 @@ -diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig -index cfe288a..c528024 100644 ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -55,6 +55,12 @@ config MTD_NAND_TOTO - help - Support for NAND flash on Texas Instruments Toto platform. - -+config MTD_NAND_RB100 -+ tristate "NAND Flash device on RB100 board" -+ depends on MTD_NAND -+ help -+ Support for NAND flash on RB100 platform. -+ - config MTD_NAND_IDS - tristate - -diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile -index 4174202..2be57c1 100644 ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids. - - obj-$(CONFIG_MTD_NAND_SPIA) += spia.o - obj-$(CONFIG_MTD_NAND_TOTO) += toto.o -+obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o - obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o - obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o