From: Daniel Kestrel <kestrel1974@t-online.de>
Date: Fri, 22 Jul 2022 19:01:49 +0000 (+0200)
Subject: lantiq: fix network port GPIO settings for Fritzbox 3390
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=506432a7839504b71b3efee92f9299386c707a99;p=openwrt%2Fstaging%2Fstintel.git

lantiq: fix network port GPIO settings for Fritzbox 3390

There are forum reports that 2 LAN ports are not working, the
GPIO settings are adjusted to fix the problem.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
(cherry picked from commit 0f301b0b1d7ca4b5fe290a72f0434525405f5a26)
---

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
index 17be2729f9..5a3f2e5836 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts
@@ -149,12 +149,12 @@
 &gswip_mdio {
 	phy0: ethernet-phy@0 {
 		reg = <0x0>;
-		gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 	};
 
 	phy1: ethernet-phy@1 {
 		reg = <0x1>;
-		gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 	};
 
 	phy11: ethernet-phy@11 {