From: INAGAKI Hiroshi Date: Thu, 23 Mar 2023 14:06:14 +0000 (+0900) Subject: mvebu: use PHY LED trigger for speed LEDs on FortiGate 50E X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4fffa0f6af7944d630687657958c9d872cf67285;p=openwrt%2Fstaging%2Fnbd.git mvebu: use PHY LED trigger for speed LEDs on FortiGate 50E Use :: trigger instead of netdev(link) trigger for Fortinet FortiGate 50E, to indicate link speed on the each phys. 1000 Mbps: Green 100 Mbps : Amber 10 Mbps : (turn off) Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E") Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds index bfc589e6c0..2b045d0945 100644 --- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds @@ -15,15 +15,6 @@ ctera,c200-v2) ucidef_set_led_usbport "usb2" "USB2" "green:usb-2" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb3" "USB3" "green:usb-1" "usb1-port2" "usb2-port2" ;; -fortinet,fg-50e) - ucidef_set_led_netdev "wan1_link" "WAN1 Link" "green:speed_wan1" "eth1" "link" - ucidef_set_led_netdev "wan2_link" "WAN2 Link" "green:speed_wan2" "eth2" "link" - ucidef_set_led_netdev "lan1_link" "LAN1 Link" "green:speed_lan1" "lan1" "link" - ucidef_set_led_netdev "lan2_link" "LAN2 Link" "green:speed_lan2" "lan2" "link" - ucidef_set_led_netdev "lan3_link" "LAN3 Link" "green:speed_lan3" "lan3" "link" - ucidef_set_led_netdev "lan4_link" "LAN4 Link" "green:speed_lan4" "lan4" "link" - ucidef_set_led_netdev "lan5_link" "LAN5 Link" "green:speed_lan5" "lan5" "link" - ;; kobol,helios4) ucidef_set_led_usbport "USB" "USB" "helios4:green:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" "usb5-port1" ;; diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts index 506e01f0ff..61d2da1755 100644 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts @@ -97,72 +97,84 @@ label = "green:speed_wan1"; gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; color = ; + linux,default-trigger = "f1072004.mdio-mii:00:1Gbps"; }; led-7 { label = "green:speed_wan2"; gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; color = ; + linux,default-trigger = "f1072004.mdio-mii:01:1Gbps"; }; led-8 { label = "amber:speed_lan5"; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; color = ; + linux,default-trigger = "mv88e6xxx-1:00:100Mbps"; }; led-9 { label = "green:speed_lan5"; gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; color = ; + linux,default-trigger = "mv88e6xxx-1:00:1Gbps"; }; led-10 { label = "green:speed_lan4"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; color = ; + linux,default-trigger = "mv88e6xxx-1:01:1Gbps"; }; led-11 { label = "amber:speed_lan4"; gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; color = ; + linux,default-trigger = "mv88e6xxx-1:01:100Mbps"; }; led-12 { label = "amber:speed_lan3"; gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; color = ; + linux,default-trigger = "mv88e6xxx-1:02:100Mbps"; }; led-13 { label = "green:speed_lan3"; gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; color = ; + linux,default-trigger = "mv88e6xxx-1:02:1Gbps"; }; led-14 { label = "green:speed_lan1"; gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; color = ; + linux,default-trigger = "mv88e6xxx-1:04:1Gbps"; }; led-15 { label = "amber:speed_lan1"; gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; color = ; + linux,default-trigger = "mv88e6xxx-1:04:100Mbps"; }; led-16 { label = "green:speed_lan2"; gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; color = ; + linux,default-trigger = "mv88e6xxx-1:03:1Gbps"; }; led-17 { label = "amber:speed_lan2"; gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; color = ; + linux,default-trigger = "mv88e6xxx-1:03:100Mbps"; }; };