From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 9 Nov 2023 14:29:39 +0000 (+0100)
Subject: ipq806x: setup DSA port conduit in board.d
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4fdd5530a7ffba356ea9768769ed1713beb7445a;p=openwrt%2Fstaging%2Fhauke.git

ipq806x: setup DSA port conduit in board.d

Now that netifd and uci-defaults.sh supports a way to setup DSA port
conduit without using iproute2 tool, set DSA port conduit directly in
board.d, that will fill board.d and will instruct netifd to setup the
port.

Drop special init.d qca8k_set_port script and ip-tiny from target dep as
they are not required anymore.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---

diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile
index 1bcea1fa80..74a0007a4e 100644
--- a/target/linux/ipq806x/Makefile
+++ b/target/linux/ipq806x/Makefile
@@ -21,6 +21,6 @@ DEFAULT_PACKAGES += \
 	kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
 	kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \
 	kmod-ath10k-ct wpad-basic-mbedtls \
-	uboot-envtools ip-tiny
+	uboot-envtools
 
 $(eval $(call BuildTarget))
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index a4316272e9..7fdda7cfec 100644
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -34,10 +34,17 @@ ipq806x_setup_interfaces()
 	tplink,ad7200 |\
 	zyxel,nbg6817)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		ucidef_set_network_device_conduit "lan1" "eth1"
+		ucidef_set_network_device_conduit "lan2" "eth1"
+		ucidef_set_network_device_conduit "lan3" "eth1"
+		ucidef_set_network_device_conduit "lan4" "eth1"
+		ucidef_set_network_device_conduit "wan" "eth0"
 		;;
 	asus,onhub |\
 	tplink,onhub)
 		ucidef_set_interfaces_lan_wan "lan1" "wan"
+		ucidef_set_network_device_conduit "lan1" "eth1"
+		ucidef_set_network_device_conduit "wan" "eth0"
 		;;
 	edgecore,ecw5410 |\
 	extreme,ap3935)
diff --git a/target/linux/ipq806x/base-files/etc/init.d/qca8k_set_port b/target/linux/ipq806x/base-files/etc/init.d/qca8k_set_port
deleted file mode 100755
index bf14907b8f..0000000000
--- a/target/linux/ipq806x/base-files/etc/init.d/qca8k_set_port
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=15
-
-set_qca8k_port() {
-	local port=$1
-	local master=$2
-
-	ip link set $port type dsa conduit $master
-}
-
-boot() {
-	# Restore original implementation where the eth1 (port 6) was used
-	# for the lan port and the eth0 (port 0) was used for the wan port
-	case $(board_name) in
-		askey,rt4230w-rev6 |\
-		asrock,g10 |\
-		buffalo,wxr-2533dhp |\
-		compex,wpq864 |\
-		nec,wg2600hp |\
-		nec,wg2600hp3 |\
-		netgear,d7800 |\
-		netgear,r7500 |\
-		netgear,r7500v2 |\
-		netgear,r7800 |\
-		netgear,xr450 |\
-		netgear,xr500 |\
-		nokia,ac400i |\
-		tplink,ad7200 |\
-		tplink,c2600 |\
-		tplink,vr2600v |\
-		zyxel,nbg6817)
-			set_qca8k_port lan1 eth1
-			set_qca8k_port lan2 eth1
-			set_qca8k_port lan3 eth1
-			set_qca8k_port lan4 eth1
-			set_qca8k_port wan eth0
-			;;
-		asus,onhub |\
-		tplink,onhub)
-			set_qca8k_port lan1 eth1
-			set_qca8k_port wan eth0
-			;;
-	esac
-}