From: Rajkumar Manoharan Date: Mon, 4 Jun 2012 10:58:14 +0000 (+0530) Subject: ath9k_hw: fix IQ calibration chain index X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4fb7175bbd6a32899617b96b0b73c2ad651dfd03;p=openwrt%2Fstaging%2Fblogic.git ath9k_hw: fix IQ calibration chain index The chain index to perform IQ calibration is counted to number of valid tx chains and then used for indexing chain specific registers. If the chainmask is set to 0x2 (i.e chain 1 only), still it accesses chain 0 registers for chain 1. So use real chain index instead sequential one. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index f83a4a2e1da2..d7deb8c9f299 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -653,7 +653,6 @@ static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement, } static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah, - u8 num_chains, struct coeff *coeff, bool is_reusable) { @@ -677,7 +676,9 @@ static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah, } /* Load the average of 2 passes */ - for (i = 0; i < num_chains; i++) { + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->txchainmask & (1 << i))) + continue; nmeasurement = REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_STATUS_B0, AR_PHY_CALIBRATED_GAINS_0); @@ -767,16 +768,13 @@ static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable) }; struct coeff coeff; s32 iq_res[6]; - u8 num_chains = 0; int i, im, j; int nmeasurement; for (i = 0; i < AR9300_MAX_CHAINS; i++) { - if (ah->txchainmask & (1 << i)) - num_chains++; - } + if (!(ah->txchainmask & (1 << i))) + continue; - for (i = 0; i < num_chains; i++) { nmeasurement = REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_STATUS_B0, AR_PHY_CALIBRATED_GAINS_0); @@ -839,8 +837,7 @@ static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable) coeff.phs_coeff[i][im] -= 128; } } - ar9003_hw_tx_iqcal_load_avg_2_passes(ah, num_chains, - &coeff, is_reusable); + ar9003_hw_tx_iqcal_load_avg_2_passes(ah, &coeff, is_reusable); return;