From: John Crispin Date: Wed, 3 Apr 2013 09:58:48 +0000 (+0000) Subject: remove old ralink 3.8 patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4f86ea43ca3ae3b670da308166f9a91f36e69f3a;p=openwrt%2Fstaging%2Frobimarko.git remove old ralink 3.8 patches Signed-off-by: John Crispin SVN-Revision: 36162 --- diff --git a/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch deleted file mode 100644 index d7678615bc..0000000000 --- a/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -55,6 +55,7 @@ - #include - #include - #include -+#include - - extern void check_wait(void); - extern asmlinkage void r4k_wait(void); -@@ -1617,6 +1618,8 @@ void __cpuinit per_cpu_trap_init(bool is - if (cpu_has_mips_r2) { - cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; - cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; -+ if (get_c0_compare_irq) -+ cp0_compare_irq = get_c0_compare_irq(); - cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; ---- a/arch/mips/include/asm/time.h -+++ b/arch/mips/include/asm/time.h -@@ -51,6 +51,7 @@ extern int (*perf_irq)(void); - * Initialize the calling CPU's compare interrupt as clockevent device - */ - extern unsigned int __weak get_c0_compare_int(void); -+extern unsigned int __weak get_c0_compare_irq(void); - extern int r4k_clockevent_init(void); - - static inline int mips_clockevent_init(void) diff --git a/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch deleted file mode 100644 index 91b887f922..0000000000 --- a/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1939,7 +1939,7 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -+ if (chip_good(map, adr, map_word_ff(map))) - break; - - if (time_after(jiffies, timeo)) { -@@ -2028,7 +2028,7 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); - break; - } diff --git a/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index 25ae351e65..0000000000 --- a/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -39,7 +39,7 @@ - #include - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_WORD_RETRIES 3 - -@@ -50,7 +50,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd) - { - struct map_info *map = mtd->priv; -@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru - mtd->_write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd) -@@ -1443,6 +1447,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1567,7 +1572,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -1642,6 +1646,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - /* - * Wait for the flash chip to become ready to write data diff --git a/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch b/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch deleted file mode 100644 index e2d8987211..0000000000 --- a/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -104,6 +104,9 @@ config ATH79 - help - Support for the Atheros AR71XX/AR724X/AR913X SoCs. - -+config MIPS_RALINK -+ bool "Ralink MIPS SoC based boards" -+ - config BCM47XX - bool "Broadcom BCM47XX based boards" - select ARCH_WANT_OPTIONAL_GPIOLIB -@@ -845,6 +848,7 @@ source "arch/mips/jz4740/Kconfig" - source "arch/mips/lantiq/Kconfig" - source "arch/mips/lasat/Kconfig" - source "arch/mips/pmc-sierra/Kconfig" -+source "arch/mips/ralink/Kconfig" - source "arch/mips/powertv/Kconfig" - source "arch/mips/sgi-ip27/Kconfig" - source "arch/mips/sibyte/Kconfig" -@@ -1172,7 +1176,7 @@ config BOOT_ELF32 - - config MIPS_L1_CACHE_SHIFT - int -- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL -+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X - default "6" if MIPS_CPU_SCACHE - default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON - default "5" ---- a/arch/mips/Kbuild.platforms -+++ b/arch/mips/Kbuild.platforms -@@ -22,6 +22,7 @@ platforms += pmc-sierra - platforms += pnx833x - platforms += pnx8550 - platforms += powertv -+platforms += ralink - platforms += rb532 - platforms += sgi-ip22 - platforms += sgi-ip27 diff --git a/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch deleted file mode 100644 index e54c100406..0000000000 --- a/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch +++ /dev/null @@ -1,89 +0,0 @@ ---- a/drivers/tty/serial/8250/Kconfig -+++ b/drivers/tty/serial/8250/Kconfig -@@ -249,6 +249,14 @@ config SERIAL_8250_ACORN - system, say Y to this option. The driver can handle 1, 2, or 3 port - cards. If unsure, say N. - -+config SERIAL_8250_RT288X -+ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" -+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883) -+ help -+ If you have a Ralink RT288x/RT305x SoC based board and want to use the -+ serial port, say Y to this option. The driver can handle up to 2 serial -+ ports. If unsure, say N. -+ - config SERIAL_8250_RM9K - bool "Support for MIPS RM9xxx integrated serial port" - depends on SERIAL_8250 != n && SERIAL_RM9000 ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -134,7 +134,7 @@ struct uart_port { - #define UPIO_HUB6 (1) - #define UPIO_MEM (2) - #define UPIO_MEM32 (3) --#define UPIO_AU (4) /* Au1x00 type IO */ -+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */ - #define UPIO_TSI (5) /* Tsi108/109 type IO */ - #define UPIO_RM9000 (6) /* RM9000 type IO */ - ---- a/drivers/tty/serial/8250/8250.c -+++ b/drivers/tty/serial/8250/8250.c -@@ -324,9 +324,9 @@ static void default_serial_dl_write(stru - serial_out(up, UART_DLM, value >> 8 & 0xff); - } - --#ifdef CONFIG_MIPS_ALCHEMY -+#if defined CONFIG_MIPS_ALCHEMY || defined (CONFIG_SERIAL_8250_RT288X) - --/* Au1x00 UART hardware has a weird register layout */ -+/* Au1x00 and RT288x UART hardware has a weird register layout */ - static const u8 au_io_in_map[] = { - [UART_RX] = 0, - [UART_IER] = 2, -@@ -506,7 +506,7 @@ static void set_io_from_upio(struct uart - break; - #endif - --#ifdef CONFIG_MIPS_ALCHEMY -+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) - case UPIO_AU: - p->serial_in = au_serial_in; - p->serial_out = au_serial_out; -@@ -731,22 +731,19 @@ static int size_fifo(struct uart_8250_po - */ - static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) - { -- unsigned char old_dll, old_dlm, old_lcr; -+ unsigned char old_lcr; -+ unsigned int old_dl; - unsigned int id; - - old_lcr = serial_in(p, UART_LCR); - serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A); - -- old_dll = serial_in(p, UART_DLL); -- old_dlm = serial_in(p, UART_DLM); -+ old_dl = serial_dl_read(p); - -- serial_out(p, UART_DLL, 0); -- serial_out(p, UART_DLM, 0); -+ serial_dl_write(p, 0); -+ id = serial_dl_read(p); - -- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8; -- -- serial_out(p, UART_DLL, old_dll); -- serial_out(p, UART_DLM, old_dlm); -+ serial_dl_write(p, old_dl); - serial_out(p, UART_LCR, old_lcr); - - return id; -@@ -872,7 +869,7 @@ static int broken_efr(struct uart_8250_p - /* - * Exar ST16C2550 "A2" devices incorrectly detect as - * having an EFR, and report an ID of 0x0201. See -- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html -+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html - */ - if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) - return 1; diff --git a/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch deleted file mode 100644 index a76603f144..0000000000 --- a/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o - obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o - obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o - obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o -+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o - - # - # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ramips/patches-3.8/103-ethernet.patch b/target/linux/ramips/patches-3.8/103-ethernet.patch deleted file mode 100644 index 5909cf28e1..0000000000 --- a/target/linux/ramips/patches-3.8/103-ethernet.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin - source "drivers/net/ethernet/pasemi/Kconfig" - source "drivers/net/ethernet/qlogic/Kconfig" - source "drivers/net/ethernet/racal/Kconfig" -+source "drivers/net/ethernet/ramips/Kconfig" - source "drivers/net/ethernet/realtek/Kconfig" - source "drivers/net/ethernet/renesas/Kconfig" - source "drivers/net/ethernet/rdc/Kconfig" ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe - obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ - obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ - obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ -+obj-$(CONFIG_NET_RAMIPS) += ramips/ - obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ - obj-$(CONFIG_SH_ETH) += renesas/ - obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ diff --git a/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch deleted file mode 100644 index 42f077e10b..0000000000 --- a/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -1077,6 +1077,13 @@ config LANTIQ_WDT - help - Hardware driver for the Lantiq SoC Watchdog Timer. - -+config RAMIPS_WDT -+ tristate "Ralink RT288X/RT305X Watchdog Timer" -+ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883) -+ help -+ Hardware driver for the built-in watchdog timer on the -+ Ralink RT288X/RT305X SoCs. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o - obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o - octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o - obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o -+obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o - - # PARISC Architecture - diff --git a/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch b/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch deleted file mode 100644 index 7665ab4b9d..0000000000 --- a/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -324,6 +324,12 @@ config SPI_RSPI - help - SPI driver for Renesas RSPI blocks. - -+config SPI_RAMIPS -+ tristate "Ralink RT288x/RT305x/RT3662 SPI Controller" -+ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883) -+ help -+ This selects a driver for the Ralink RT288x/RT305x SPI Controller. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C24XX && EXPERIMENTAL ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o - obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o - obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o -+obj-$(CONFIG_SPI_RAMIPS) += spi-ramips.o - obj-$(CONFIG_SPI_RSPI) += spi-rspi.o - obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o - spi-s3c24xx-hw-y := spi-s3c24xx.o diff --git a/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch b/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch deleted file mode 100644 index 88c211569b..0000000000 --- a/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/usb/Kconfig -+++ b/drivers/usb/Kconfig -@@ -188,4 +188,6 @@ source "drivers/usb/gadget/Kconfig" - - source "drivers/usb/otg/Kconfig" - -+source "drivers/usb/dwc_otg/Kconfig" -+ - endif # USB_SUPPORT ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -52,6 +52,8 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early - obj-$(CONFIG_USB_ATM) += atm/ - obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ - -+obj-$(CONFIG_DWC_OTG) += dwc_otg/ -+ - obj-$(CONFIG_USB_MUSB_HDRC) += musb/ - obj-$(CONFIG_USB_CHIPIDEA) += chipidea/ - obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/ diff --git a/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch b/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch deleted file mode 100644 index 9f5ef9f73f..0000000000 --- a/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchem - obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o - obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o - obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o -+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o - - # - # These are still pretty much in the old state, watch, go blind.