From: Rosen Penev Date: Sat, 24 Aug 2024 19:35:03 +0000 (-0700) Subject: ramips: use nvmem to get mikrotik mac X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4f4cb52e24ddf4e931b783ea8e65ec5d5b530261;p=openwrt%2Fstaging%2Fansuel.git ramips: use nvmem to get mikrotik mac 73a9f9f857947bc63fef1aefb7e2e4b906fb9d2b added support. Let's use it. Calibration data is not yet supported. Signed-off-by: Rosen Penev Link: https://github.com/openwrt/openwrt/pull/16256 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/ramips/dts/mt7621_mikrotik.dtsi b/target/linux/ramips/dts/mt7621_mikrotik.dtsi index ace194c6d6..67892cc1a0 100644 --- a/target/linux/ramips/dts/mt7621_mikrotik.dtsi +++ b/target/linux/ramips/dts/mt7621_mikrotik.dtsi @@ -49,6 +49,14 @@ hard_config { read-only; + + nvmem-layout { + compatible = "mikrotik,routerboot-nvmem"; + + macaddr_hard: base-mac-address { + #nvmem-cell-cells = <1>; + }; + }; }; partition@10000 { diff --git a/target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts b/target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts index b5e38071f1..a3e3d8f4ce 100644 --- a/target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts +++ b/target/linux/ramips/dts/mt7621_mikrotik_ltap-2hnd.dts @@ -11,6 +11,7 @@ led-failsafe = &led_usr; led-running = &led_usr; led-upgrade = &led_usr; + label-mac-device = ðernet; }; ath9k-leds { @@ -128,6 +129,9 @@ ðernet { pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; + + nvmem-cells = <&macaddr_hard 0>; + nvmem-cell-names = "mac-address"; }; &switch0 { @@ -146,6 +150,8 @@ compatible = "pci168c,0030"; reg = <0x0000 0 0 0 0>; qca,no-eeprom; + nvmem-cells = <&macaddr_hard 1>; + nvmem-cell-names = "mac-address"; gpio-controller; #gpio-cells = <2>; }; diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts index faa4e53f09..6357dceb6d 100644 --- a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts +++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-750gr3.dts @@ -11,6 +11,7 @@ led-failsafe = &led_usr; led-running = &led_usr; led-upgrade = &led_usr; + label-mac-device = &gmac1; }; leds { @@ -40,6 +41,9 @@ status = "okay"; label = "wan"; phy-handle = <ðphy0>; + + nvmem-cells = <&macaddr_hard 0>; + nvmem-cell-names = "mac-address"; }; ðphy0 { diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-760igs.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-760igs.dts index 8b88cfe0a3..c9d07cf96c 100644 --- a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-760igs.dts +++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-760igs.dts @@ -11,6 +11,7 @@ led-failsafe = &led_pwr; led-running = &led_pwr; led-upgrade = &led_pwr; + label-mac-device = &port0; }; leds { @@ -51,6 +52,9 @@ label = "sfp"; phy-mode = "rgmii-rxid"; phy-handle = <&ephy7>; + + nvmem-cells = <&macaddr_hard 5>; + nvmem-cell-names = "mac-address"; }; &i2c { diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-7xx.dtsi b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-7xx.dtsi index b8fae51c3b..cdca47f8b8 100644 --- a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-7xx.dtsi +++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-7xx.dtsi @@ -40,29 +40,44 @@ &switch0 { ports { - port@0 { + port0: port@0 { status = "okay"; label = "wan"; + + nvmem-cells = <&macaddr_hard 0>; + nvmem-cell-names = "mac-address"; }; port@1 { status = "okay"; label = "lan2"; + + nvmem-cells = <&macaddr_hard 1>; + nvmem-cell-names = "mac-address"; }; port@2 { status = "okay"; label = "lan3"; + + nvmem-cells = <&macaddr_hard 2>; + nvmem-cell-names = "mac-address"; }; port@3 { status = "okay"; label = "lan4"; + + nvmem-cells = <&macaddr_hard 3>; + nvmem-cell-names = "mac-address"; }; port@4 { status = "okay"; label = "lan5"; + + nvmem-cells = <&macaddr_hard 4>; + nvmem-cell-names = "mac-address"; }; }; }; diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts index 5f9ee90e7c..89ef5fb3fd 100644 --- a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts +++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m11g.dts @@ -9,6 +9,7 @@ led-failsafe = &led_usr; led-running = &led_usr; led-upgrade = &led_usr; + label-mac-device = ðernet; }; leds { @@ -68,6 +69,9 @@ ðernet { pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; + + nvmem-cells = <&macaddr_hard 0>; + nvmem-cell-names = "mac-address"; }; &switch0 { @@ -75,6 +79,9 @@ port@0 { status = "okay"; label = "lan"; + + nvmem-cells = <&macaddr_hard 1>; + nvmem-cell-names = "mac-address"; }; }; }; diff --git a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts index 5e76261529..e26d3cee2e 100644 --- a/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts +++ b/target/linux/ramips/dts/mt7621_mikrotik_routerboard-m33g.dts @@ -9,6 +9,7 @@ led-failsafe = &led_usr; led-running = &led_usr; led-upgrade = &led_usr; + label-mac-device = &gmac1; }; leds { @@ -94,6 +95,9 @@ status = "okay"; label = "wan"; phy-handle = <ðphy0>; + + nvmem-cells = <&macaddr_hard 0>; + nvmem-cell-names = "mac-address"; }; ðphy0 { @@ -105,11 +109,17 @@ port@1 { status = "okay"; label = "lan1"; + + nvmem-cells = <&macaddr_hard 1>; + nvmem-cell-names = "mac-address"; }; port@2 { status = "okay"; label = "lan2"; + + nvmem-cells = <&macaddr_hard 2>; + nvmem-cell-names = "mac-address"; }; }; }; diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 12098f0bbf..471f9ecfbd 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -299,10 +299,6 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr) label_mac=$lan_mac ;; - mikrotik,ltap-2hnd) - label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base") - lan_mac=$label_mac - ;; tplink,er605-v2) CI_UBIPART="firmware" label_mac=$(mtd_get_mac_uci_config_ubi "tddp") @@ -314,14 +310,6 @@ ramips_setup_macs() wwan_mac=$(macaddr_add $label_mac 1) ucidef_set_interface "wwan0" device "/dev/cdc-wdm0" protocol "qmi" macaddr "$wwan_mac" ;; - mikrotik,routerboard-750gr3|\ - mikrotik,routerboard-760igs|\ - mikrotik,routerboard-m11g|\ - mikrotik,routerboard-m33g) - label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base") - wan_mac=$label_mac - lan_mac=$(macaddr_add $label_mac 1) - ;; ruijie,rg-ew1200g-pro-v1.1) lan_mac=$(mtd_get_mac_ascii product_info ethaddr) wan_mac=$(macaddr_add "$lan_mac" 8) diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 0bf5e85cd0..a334d1a5a0 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -4,26 +4,13 @@ . /lib/functions/caldata.sh -caldata_mikrotik_ath9k() { - local offset=$(($1)) - local count=$(($2)) - local macaddr=$3 - local wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data" - - caldata_from_file $wlan_data $offset $count /tmp/$FIRMWARE - ath9k_patch_mac "$macaddr" /tmp/$FIRMWARE - caldata_sysfsload_from_file /tmp/$FIRMWARE 0x0 $count - rm -f /tmp/$FIRMWARE -} - board=$(board_name) case "$FIRMWARE" in "ath9k-eeprom-pci-0000:01:00.0.bin") case $board in mikrotik,ltap-2hnd) - mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)" - caldata_mikrotik_ath9k 0x5000 0x440 $(macaddr_add "$mac_base" 1) + caldata_sysfsload_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x440 ;; *) caldata_die "board $board is not supported yet" diff --git a/target/linux/ramips/mt7621/config-6.6 b/target/linux/ramips/mt7621/config-6.6 index adbb7c8465..5e10f03ac1 100644 --- a/target/linux/ramips/mt7621/config-6.6 +++ b/target/linux/ramips/mt7621/config-6.6 @@ -202,7 +202,7 @@ CONFIG_NO_HZ_IDLE=y CONFIG_NR_CPUS=4 CONFIG_NVMEM=y CONFIG_NVMEM_LAYOUTS=y -# CONFIG_NVMEM_LAYOUT_MIKROTIK is not set +CONFIG_NVMEM_LAYOUT_MIKROTIK=y CONFIG_NVMEM_LAYOUT_U_BOOT_ENV=y CONFIG_OF=y CONFIG_OF_ADDRESS=y