From: Cooper Jr., Franklin Date: Fri, 16 Jun 2017 22:25:26 +0000 (-0500) Subject: ARM: k2g: Use board detection to wrap K2G GP specific calls X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4f490402c4acbca5c189db24c445220b10557cee;p=project%2Fbcm63xx%2Fu-boot.git ARM: k2g: Use board detection to wrap K2G GP specific calls Certain peripherals used by K2G GP aren't used on K2G ICE evm. Or configuration is slightly different. Therefore, use board detection to deal with these variations. Signed-off-by: Franklin S Cooper Jr Reviewed-by: Tom Rini --- diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c index 362231286b..9001255f82 100644 --- a/board/ti/ks2_evm/board_k2g.c +++ b/board/ti/ks2_evm/board_k2g.c @@ -208,7 +208,9 @@ int board_mmc_init(bd_t *bis) return -1; } - omap_mmc_init(0, 0, 0, -1, -1); + if (board_is_k2g_gp()) + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } @@ -278,11 +280,13 @@ int embedded_dtb_select(void) k2g_reset_mux_config(); - /* deassert FLASH_HOLD */ - clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET, - BIT(9)); - setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET, - BIT(9)); + if (board_is_k2g_gp()) { + /* deassert FLASH_HOLD */ + clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET, + BIT(9)); + setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET, + BIT(9)); + } return 0; }