From: Robert Marko Date: Fri, 30 Oct 2020 13:18:27 +0000 (+0100) Subject: ipq40xx: 5.4: update and reorder patches X-Git-Tag: v21.02.0-rc1~1113 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4f277b4da5238f0514ad48d7b98f9428f2b4b8a1;p=openwrt%2Fstaging%2Fpepe2k.git ipq40xx: 5.4: update and reorder patches A lot of patches are outdated versions of upstreamed patches and drivers. So lets pull in the upstreamed patches and reorder remaining ones. This drops the unnecessary 721-dts-ipq4019-add-ethernet-essedma-node.patch which adds nodes for not yet in OpenWrt IPQESS driver. Signed-off-by: Robert Marko [do not touch 902-dts-ipq4019-ap-dk04.1.patch here] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch new file mode 100644 index 0000000000..8aa71f360f --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch @@ -0,0 +1,42 @@ +From f125e2d4339dda6937865f975470b29c84714c9b Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Mon, 6 Jan 2020 14:57:15 +0100 +Subject: [PATCH] ARM: qcom: Add support for IPQ40xx + +Add support for the Qualcomm IPQ40xx SoC in Kconfig. +Also add its appropriate textofs. + +Signed-off-by: Christian Lamparter +Signed-off-by: John Crispin +Tested-by: Robert Marko +Cc: Luka Perkov +Signed-off-by: Arnd Bergmann +--- + arch/arm/Makefile | 1 + + arch/arm/mach-qcom/Kconfig | 5 +++++ + 2 files changed, 6 insertions(+) + +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x001 + ifeq ($(CONFIG_ARCH_SA1100),y) + textofs-$(CONFIG_SA1111) := 0x00208000 + endif ++textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 + textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 + textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 + textofs-$(CONFIG_ARCH_MESON) := 0x00208000 +--- a/arch/arm/mach-qcom/Kconfig ++++ b/arch/arm/mach-qcom/Kconfig +@@ -12,6 +12,11 @@ menuconfig ARCH_QCOM + + if ARCH_QCOM + ++config ARCH_IPQ40XX ++ bool "Enable support for IPQ40XX" ++ select CLKSRC_QCOM ++ select HAVE_ARM_ARCH_TIMER ++ + config ARCH_MSM8X60 + bool "Enable support for MSM8X60" + select CLKSRC_QCOM diff --git a/target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch b/target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch new file mode 100644 index 0000000000..aaf8c807ed --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch @@ -0,0 +1,153 @@ +From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 22 Jan 2020 12:44:14 +0100 +Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17 + 00:00:00 2001 From: Robert Marko Date: Sun, 12 Jan + 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO + driver + +This introduces the IPQ4019 VQMMC LDO driver needed for +the SD/EMMC driver I/O level operation. +This will enable introducing SD/EMMC support for the built-in controller. + +Signed-off-by: Mantas Pucka +Signed-off-by: Robert Marko +Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr +Signed-off-by: Mark Brown +--- + drivers/regulator/Kconfig | 7 ++ + drivers/regulator/Makefile | 1 + + drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++ + 3 files changed, 109 insertions(+) + create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c + +--- a/drivers/regulator/Kconfig ++++ b/drivers/regulator/Kconfig +@@ -1077,6 +1077,13 @@ config REGULATOR_VEXPRESS + This driver provides support for voltage regulators available + on the ARM Ltd's Versatile Express platform. + ++config REGULATOR_VQMMC_IPQ4019 ++ tristate "IPQ4019 VQMMC SD LDO regulator support" ++ depends on ARCH_QCOM ++ help ++ This driver provides support for the VQMMC LDO I/0 ++ voltage regulator of the IPQ4019 SD/EMMC controller. ++ + config REGULATOR_WM831X + tristate "Wolfson Microelectronics WM831x PMIC regulators" + depends on MFD_WM831X +--- a/drivers/regulator/Makefile ++++ b/drivers/regulator/Makefile +@@ -132,6 +132,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r + obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o + obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o + obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o ++obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o + obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o + obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o + obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o +--- /dev/null ++++ b/drivers/regulator/vqmmc-ipq4019-regulator.c +@@ -0,0 +1,101 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++// ++// Copyright (c) 2019 Mantas Pucka ++// Copyright (c) 2019 Robert Marko ++// ++// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static const unsigned int ipq4019_vmmc_voltages[] = { ++ 1500000, 1800000, 2500000, 3000000, ++}; ++ ++static const struct regulator_ops ipq4019_regulator_voltage_ops = { ++ .list_voltage = regulator_list_voltage_table, ++ .map_voltage = regulator_map_voltage_ascend, ++ .get_voltage_sel = regulator_get_voltage_sel_regmap, ++ .set_voltage_sel = regulator_set_voltage_sel_regmap, ++}; ++ ++static const struct regulator_desc vmmc_regulator = { ++ .name = "vmmcq", ++ .ops = &ipq4019_regulator_voltage_ops, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++ .volt_table = ipq4019_vmmc_voltages, ++ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages), ++ .vsel_reg = 0, ++ .vsel_mask = 0x3, ++}; ++ ++static const struct regmap_config ipq4019_vmmcq_regmap_config = { ++ .reg_bits = 32, ++ .reg_stride = 4, ++ .val_bits = 32, ++}; ++ ++static int ipq4019_regulator_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct regulator_init_data *init_data; ++ struct regulator_config cfg = {}; ++ struct regulator_dev *rdev; ++ struct resource *res; ++ struct regmap *rmap; ++ void __iomem *base; ++ ++ init_data = of_get_regulator_init_data(dev, dev->of_node, ++ &vmmc_regulator); ++ if (!init_data) ++ return -EINVAL; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config); ++ if (IS_ERR(rmap)) ++ return PTR_ERR(rmap); ++ ++ cfg.dev = dev; ++ cfg.init_data = init_data; ++ cfg.of_node = dev->of_node; ++ cfg.regmap = rmap; ++ ++ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg); ++ if (IS_ERR(rdev)) { ++ dev_err(dev, "Failed to register regulator: %ld\n", ++ PTR_ERR(rdev)); ++ return PTR_ERR(rdev); ++ } ++ platform_set_drvdata(pdev, rdev); ++ ++ return 0; ++} ++ ++static const struct of_device_id regulator_ipq4019_of_match[] = { ++ { .compatible = "qcom,vqmmc-ipq4019-regulator", }, ++ {}, ++}; ++ ++static struct platform_driver ipq4019_regulator_driver = { ++ .probe = ipq4019_regulator_probe, ++ .driver = { ++ .name = "vqmmc-ipq4019-regulator", ++ .of_match_table = of_match_ptr(regulator_ipq4019_of_match), ++ }, ++}; ++module_platform_driver(ipq4019_regulator_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mantas Pucka "); ++MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator"); diff --git a/target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch b/target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch new file mode 100644 index 0000000000..25fce8daf0 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch @@ -0,0 +1,36 @@ +From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Thu, 15 Aug 2019 19:28:23 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node + +IPQ4019 has a built in SD/eMMC controller which is supported by the +SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding. +So lets add the appropriate node for it. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -206,6 +206,18 @@ + interrupts = ; + }; + ++ sdhci: sdhci@7824900 { ++ compatible = "qcom,sdhci-msm-v4"; ++ reg = <0x7824900 0x11c>, <0x7824000 0x800>; ++ interrupts = , ; ++ interrupt-names = "hc_irq", "pwr_irq"; ++ bus-width = <8>; ++ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, ++ <&gcc GCC_DCD_XO_CLK>; ++ clock-names = "core", "iface", "xo"; ++ status = "disabled"; ++ }; ++ + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; diff --git a/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch new file mode 100644 index 0000000000..3a4127febf --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch @@ -0,0 +1,71 @@ +From 5e4548922009870a38bcf1d887317676d4e08f54 Mon Sep 17 00:00:00 2001 +From: Damir Franusic +Date: Thu, 21 Nov 2019 16:29:02 +0100 +Subject: [PATCH] ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx + +Add missing nodes and properties to enable SMP +support on IPQ40xx devices. + +Booting without "saw_l2" node: + +[ 0.001400] CPU: Testing write buffer coherency: ok +[ 0.001856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 +[ 0.060163] Setting up static identity map for 0x80300000 - 0x80300060 +[ 0.080140] rcu: Hierarchical SRCU implementation. +[ 0.120258] smp: Bringing up secondary CPUs ... +[ 0.200540] CPU1: failed to boot: -19 +[ 0.280689] CPU2: failed to boot: -19 +[ 0.360874] CPU3: failed to boot: -19 +[ 0.360966] smp: Brought up 1 node, 1 CPU +[ 0.360979] SMP: Total of 1 processors activated (96.00 BogoMIPS). +[ 0.360988] CPU: All CPU(s) started in SVC mode. + +Then, booting with "saw_l2" node present (this patch applied): + +[ 0.001450] CPU: Testing write buffer coherency: ok +[ 0.001904] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 +[ 0.060161] Setting up static identity map for 0x80300000 - 0x80300060 +[ 0.080137] rcu: Hierarchical SRCU implementation. +[ 0.120252] smp: Bringing up secondary CPUs ... +[ 0.200958] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 +[ 0.281091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 +[ 0.361264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 +[ 0.361430] smp: Brought up 1 node, 4 CPUs +[ 0.361460] SMP: Total of 4 processors activated (384.00 BogoMIPS). +[ 0.361469] CPU: All CPU(s) started in SVC mode. + +Signed-off-by: Damir Franusic +Cc: Luka Perkov +Cc: Robert Marko +Cc: Andy Gross +Cc: Rob Herring +Cc: linux-arm-msm@vger.kernel.org +Link: https://lore.kernel.org/r/20191121152902.21394-1-damir.franusic@gmail.com +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -102,6 +102,7 @@ + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; ++ qcom,saw = <&saw_l2>; + }; + }; + +@@ -353,6 +354,12 @@ + regulator; + }; + ++ saw_l2: regulator@b012000 { ++ compatible = "qcom,saw2"; ++ reg = <0xb012000 0x1000>; ++ regulator; ++ }; ++ + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; diff --git a/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch new file mode 100644 index 0000000000..6922bc8ff3 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch @@ -0,0 +1,119 @@ +From 8b99dc0922618062a1589ebd74df6108b4f9ac22 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Wed, 8 Jan 2020 13:54:55 +0100 +Subject: [PATCH] ARM: dts: qcom: add gpio-ranges property + +This patch adds the gpio-ranges property to almost all of +the Qualcomm ARM platforms that utilize the pinctrl-msm +framework. + +The gpio-ranges property is part of the gpiolib subsystem. +As a result, the binding text is available in section +"2.1 gpio- and pin-controller interaction" of +Documentation/devicetree/bindings/gpio/gpio.txt + +For more information please see the patch titled: +"pinctrl: msm: fix gpio-hog related boot issues" from +this series. + +Reported-by: Sven Eckelmann +Tested-by: Sven Eckelmann [ipq4019] +Reviewed-by: Bjorn Andersson +Reviewed-by: Linus Walleij +Signed-off-by: Christian Lamparter +Tested-by: Robert Marko [ipq4019] +Cc: Luka Perkov +Signed-off-by: Robert Marko +Link: https://lore.kernel.org/r/20200108125455.308969-1-robert.marko@sartura.hr +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + + arch/arm/boot/dts/qcom-apq8084.dtsi | 1 + + arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + + arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 + + arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8660.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8960.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + + 8 files changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/qcom-apq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-apq8064.dtsi +@@ -350,6 +350,7 @@ + reg = <0x800000 0x4000>; + + gpio-controller; ++ gpio-ranges = <&tlmm_pinmux 0 0 90>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/arch/arm/boot/dts/qcom-apq8084.dtsi ++++ b/arch/arm/boot/dts/qcom-apq8084.dtsi +@@ -401,6 +401,7 @@ + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; ++ gpio-ranges = <&tlmm 0 0 147>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -201,6 +201,7 @@ + compatible = "qcom,ipq4019-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; ++ gpio-ranges = <&tlmm 0 0 100>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -119,6 +119,7 @@ + reg = <0x800000 0x4000>; + + gpio-controller; ++ gpio-ranges = <&qcom_pinmux 0 0 69>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi ++++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi +@@ -128,6 +128,7 @@ + msmgpio: pinctrl@800000 { + compatible = "qcom,mdm9615-pinctrl"; + gpio-controller; ++ gpio-ranges = <&msmgpio 0 0 88>; + #gpio-cells = <2>; + interrupts = ; + interrupt-controller; +--- a/arch/arm/boot/dts/qcom-msm8660.dtsi ++++ b/arch/arm/boot/dts/qcom-msm8660.dtsi +@@ -115,6 +115,7 @@ + reg = <0x800000 0x4000>; + + gpio-controller; ++ gpio-ranges = <&tlmm 0 0 173>; + #gpio-cells = <2>; + interrupts = <0 16 0x4>; + interrupt-controller; +--- a/arch/arm/boot/dts/qcom-msm8960.dtsi ++++ b/arch/arm/boot/dts/qcom-msm8960.dtsi +@@ -107,6 +107,7 @@ + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + gpio-controller; ++ gpio-ranges = <&msmgpio 0 0 152>; + #gpio-cells = <2>; + interrupts = <0 16 0x4>; + interrupt-controller; +--- a/arch/arm/boot/dts/qcom-msm8974.dtsi ++++ b/arch/arm/boot/dts/qcom-msm8974.dtsi +@@ -707,6 +707,7 @@ + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; ++ gpio-ranges = <&msmgpio 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; diff --git a/target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch b/target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch new file mode 100644 index 0000000000..f82021f4cd --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch @@ -0,0 +1,33 @@ +From 8acc36189dcaf4487d8c6ba7445948f39b1d248a Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu +Date: Fri, 3 Apr 2020 13:40:40 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: fix high resolution timer + +Cherry-picked from CAF QSDK repo. +Original commit message: +The kernel is failing in switching the timer for high resolution +mode and clock source operates in 10ms resolution. The always-on +property needs to be given for timer device tree node to make +clock source working in 1ns resolution. + +Signed-off-by: Abhishek Sahu +Signed-off-by: Pavel Kubelun +Signed-off-by: Christian Lamparter +Tested-by: Robert Marko +Cc: Luka Perkov +Link: https://lore.kernel.org/r/20200403114040.349787-1-robert.marko@sartura.hr +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -166,6 +166,7 @@ + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <48000000>; ++ always-on; + }; + + soc { diff --git a/target/linux/ipq40xx/patches-5.4/0005-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch b/target/linux/ipq40xx/patches-5.4/0005-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch new file mode 100644 index 0000000000..1976686e8f --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0005-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch @@ -0,0 +1,57 @@ +From 9c8c0f70ec6fdac2398632c723c48277be09b7c0 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Thu, 30 Apr 2020 11:07:07 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: add MDIO node + +This patch adds the necessary MDIO interface node +to the Qualcomm IPQ4019 DTSI. + +Built-in QCA8337N switch is managed using it, +and since we have a driver for it lets add it. + +Signed-off-by: Christian Lamparter +Signed-off-by: Robert Marko +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Cc: Luka Perkov +Signed-off-by: David S. Miller +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -577,5 +577,33 @@ + "legacy"; + status = "disabled"; + }; ++ ++ mdio: mdio@90000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "qcom,ipq4019-mdio"; ++ reg = <0x90000 0x64>; ++ status = "disabled"; ++ ++ ethphy0: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ ethphy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ ethphy2: ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ ethphy3: ethernet-phy@3 { ++ reg = <3>; ++ }; ++ ++ ethphy4: ethernet-phy@4 { ++ reg = <4>; ++ }; ++ }; + }; + }; diff --git a/target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch b/target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch new file mode 100644 index 0000000000..415d6fff99 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch @@ -0,0 +1,31 @@ +From: Eneas U de Queiroz +Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag + +Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by +the qce driver, since they are all hardware accelerated, accessible +through a kernel driver only, and not available directly to userspace. + +Signed-off-by: Eneas U de Queiroz + +--- a/drivers/crypto/qce/ablkcipher.c ++++ b/drivers/crypto/qce/ablkcipher.c +@@ -380,7 +380,7 @@ static int qce_ablkcipher_register_one(c + + alg->cra_priority = 300; + alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | +- CRYPTO_ALG_NEED_FALLBACK; ++ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; + alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); + alg->cra_alignmask = 0; + alg->cra_type = &crypto_ablkcipher_type; +--- a/drivers/crypto/qce/sha.c ++++ b/drivers/crypto/qce/sha.c +@@ -495,7 +495,7 @@ static int qce_ahash_register_one(const + base = &alg->halg.base; + base->cra_blocksize = def->blocksize; + base->cra_priority = 300; +- base->cra_flags = CRYPTO_ALG_ASYNC; ++ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY; + base->cra_ctxsize = sizeof(struct qce_sha_ctx); + base->cra_alignmask = 0; + base->cra_module = THIS_MODULE; diff --git a/target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch b/target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch new file mode 100644 index 0000000000..4dcb942150 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch @@ -0,0 +1,993 @@ +From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001 +From: Ard Biesheuvel +Date: Tue, 5 Nov 2019 14:28:17 +0100 +Subject: [PATCH] crypto: qce - switch to skcipher API + +Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface") +dated 20 august 2015 introduced the new skcipher API which is supposed to +replace both blkcipher and ablkcipher. While all consumers of the API have +been converted long ago, some producers of the ablkcipher remain, forcing +us to keep the ablkcipher support routines alive, along with the matching +code to expose [a]blkciphers via the skcipher API. + +So switch this driver to the skcipher API, allowing us to finally drop the +blkcipher code in the near future. + +Reviewed-by: Stanimir Varbanov +Signed-off-by: Ard Biesheuvel +Backported-to-4.19-by: Eneas U de Queiroz + +--- a/drivers/crypto/qce/Makefile ++++ b/drivers/crypto/qce/Makefile +@@ -4,4 +4,4 @@ qcrypto-objs := core.o \ + common.o \ + dma.o \ + sha.o \ +- ablkcipher.o ++ skcipher.o +--- a/drivers/crypto/qce/cipher.h ++++ b/drivers/crypto/qce/cipher.h +@@ -45,12 +45,12 @@ struct qce_cipher_reqctx { + unsigned int cryptlen; + }; + +-static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm) ++static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm) + { +- struct crypto_alg *alg = tfm->__crt_alg; +- return container_of(alg, struct qce_alg_template, alg.crypto); ++ struct skcipher_alg *alg = crypto_skcipher_alg(tfm); ++ return container_of(alg, struct qce_alg_template, alg.skcipher); + } + +-extern const struct qce_algo_ops ablkcipher_ops; ++extern const struct qce_algo_ops skcipher_ops; + + #endif /* _CIPHER_H_ */ +--- a/drivers/crypto/qce/common.c ++++ b/drivers/crypto/qce/common.c +@@ -304,13 +304,13 @@ go_proc: + return 0; + } + +-static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req, ++static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, + u32 totallen, u32 offset) + { +- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); +- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); ++ struct skcipher_request *req = skcipher_request_cast(async_req); ++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); + struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm); +- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); ++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); + struct qce_device *qce = tmpl->qce; + __be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0}; + __be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0}; +@@ -389,8 +389,8 @@ int qce_start(struct crypto_async_reques + u32 offset) + { + switch (type) { +- case CRYPTO_ALG_TYPE_ABLKCIPHER: +- return qce_setup_regs_ablkcipher(async_req, totallen, offset); ++ case CRYPTO_ALG_TYPE_SKCIPHER: ++ return qce_setup_regs_skcipher(async_req, totallen, offset); + case CRYPTO_ALG_TYPE_AHASH: + return qce_setup_regs_ahash(async_req, totallen, offset); + default: +--- a/drivers/crypto/qce/common.h ++++ b/drivers/crypto/qce/common.h +@@ -10,6 +10,7 @@ + #include + #include + #include ++#include + + /* key size in bytes */ + #define QCE_SHA_HMAC_KEY_SIZE 64 +@@ -79,7 +80,7 @@ struct qce_alg_template { + unsigned long alg_flags; + const u32 *std_iv; + union { +- struct crypto_alg crypto; ++ struct skcipher_alg skcipher; + struct ahash_alg ahash; + } alg; + struct qce_device *qce; +--- a/drivers/crypto/qce/core.c ++++ b/drivers/crypto/qce/core.c +@@ -22,7 +22,7 @@ + #define QCE_QUEUE_LENGTH 1 + + static const struct qce_algo_ops *qce_ops[] = { +- &ablkcipher_ops, ++ &skcipher_ops, + &ahash_ops, + }; + +--- a/drivers/crypto/qce/ablkcipher.c ++++ /dev/null +@@ -1,440 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-only +-/* +- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. +- */ +- +-#include +-#include +-#include +-#include +-#include +-#include +- +-#include "cipher.h" +- +-static LIST_HEAD(ablkcipher_algs); +- +-static void qce_ablkcipher_done(void *data) +-{ +- struct crypto_async_request *async_req = data; +- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); +- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); +- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); +- struct qce_device *qce = tmpl->qce; +- enum dma_data_direction dir_src, dir_dst; +- u32 status; +- int error; +- bool diff_dst; +- +- diff_dst = (req->src != req->dst) ? true : false; +- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; +- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; +- +- error = qce_dma_terminate_all(&qce->dma); +- if (error) +- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n", +- error); +- +- if (diff_dst) +- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); +- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); +- +- sg_free_table(&rctx->dst_tbl); +- +- error = qce_check_status(qce, &status); +- if (error < 0) +- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status); +- +- qce->async_req_done(tmpl->qce, error); +-} +- +-static int +-qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req) +-{ +- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); +- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); +- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req); +- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); +- struct qce_device *qce = tmpl->qce; +- enum dma_data_direction dir_src, dir_dst; +- struct scatterlist *sg; +- bool diff_dst; +- gfp_t gfp; +- int ret; +- +- rctx->iv = req->info; +- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher); +- rctx->cryptlen = req->nbytes; +- +- diff_dst = (req->src != req->dst) ? true : false; +- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; +- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; +- +- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes); +- if (diff_dst) +- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes); +- else +- rctx->dst_nents = rctx->src_nents; +- if (rctx->src_nents < 0) { +- dev_err(qce->dev, "Invalid numbers of src SG.\n"); +- return rctx->src_nents; +- } +- if (rctx->dst_nents < 0) { +- dev_err(qce->dev, "Invalid numbers of dst SG.\n"); +- return -rctx->dst_nents; +- } +- +- rctx->dst_nents += 1; +- +- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? +- GFP_KERNEL : GFP_ATOMIC; +- +- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); +- if (ret) +- return ret; +- +- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); +- +- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); +- if (IS_ERR(sg)) { +- ret = PTR_ERR(sg); +- goto error_free; +- } +- +- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); +- if (IS_ERR(sg)) { +- ret = PTR_ERR(sg); +- goto error_free; +- } +- +- sg_mark_end(sg); +- rctx->dst_sg = rctx->dst_tbl.sgl; +- +- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); +- if (ret < 0) +- goto error_free; +- +- if (diff_dst) { +- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); +- if (ret < 0) +- goto error_unmap_dst; +- rctx->src_sg = req->src; +- } else { +- rctx->src_sg = rctx->dst_sg; +- } +- +- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, +- rctx->dst_sg, rctx->dst_nents, +- qce_ablkcipher_done, async_req); +- if (ret) +- goto error_unmap_src; +- +- qce_dma_issue_pending(&qce->dma); +- +- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0); +- if (ret) +- goto error_terminate; +- +- return 0; +- +-error_terminate: +- qce_dma_terminate_all(&qce->dma); +-error_unmap_src: +- if (diff_dst) +- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); +-error_unmap_dst: +- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); +-error_free: +- sg_free_table(&rctx->dst_tbl); +- return ret; +-} +- +-static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key, +- unsigned int keylen) +-{ +- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk); +- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); +- int ret; +- +- if (!key || !keylen) +- return -EINVAL; +- +- switch (keylen) { +- case AES_KEYSIZE_128: +- case AES_KEYSIZE_256: +- break; +- default: +- goto fallback; +- } +- +- ctx->enc_keylen = keylen; +- memcpy(ctx->enc_key, key, keylen); +- return 0; +-fallback: +- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); +- if (!ret) +- ctx->enc_keylen = keylen; +- return ret; +-} +- +-static int qce_des_setkey(struct crypto_ablkcipher *ablk, const u8 *key, +- unsigned int keylen) +-{ +- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk); +- int err; +- +- err = verify_ablkcipher_des_key(ablk, key); +- if (err) +- return err; +- +- ctx->enc_keylen = keylen; +- memcpy(ctx->enc_key, key, keylen); +- return 0; +-} +- +-static int qce_des3_setkey(struct crypto_ablkcipher *ablk, const u8 *key, +- unsigned int keylen) +-{ +- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk); +- int err; +- +- err = verify_ablkcipher_des3_key(ablk, key); +- if (err) +- return err; +- +- ctx->enc_keylen = keylen; +- memcpy(ctx->enc_key, key, keylen); +- return 0; +-} +- +-static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt) +-{ +- struct crypto_tfm *tfm = +- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req)); +- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); +- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); +- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); +- int ret; +- +- rctx->flags = tmpl->alg_flags; +- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; +- +- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && +- ctx->enc_keylen != AES_KEYSIZE_256) { +- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); +- +- skcipher_request_set_sync_tfm(subreq, ctx->fallback); +- skcipher_request_set_callback(subreq, req->base.flags, +- NULL, NULL); +- skcipher_request_set_crypt(subreq, req->src, req->dst, +- req->nbytes, req->info); +- ret = encrypt ? crypto_skcipher_encrypt(subreq) : +- crypto_skcipher_decrypt(subreq); +- skcipher_request_zero(subreq); +- return ret; +- } +- +- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); +-} +- +-static int qce_ablkcipher_encrypt(struct ablkcipher_request *req) +-{ +- return qce_ablkcipher_crypt(req, 1); +-} +- +-static int qce_ablkcipher_decrypt(struct ablkcipher_request *req) +-{ +- return qce_ablkcipher_crypt(req, 0); +-} +- +-static int qce_ablkcipher_init(struct crypto_tfm *tfm) +-{ +- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); +- +- memset(ctx, 0, sizeof(*ctx)); +- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx); +- +- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(tfm), +- 0, CRYPTO_ALG_NEED_FALLBACK); +- return PTR_ERR_OR_ZERO(ctx->fallback); +-} +- +-static void qce_ablkcipher_exit(struct crypto_tfm *tfm) +-{ +- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); +- +- crypto_free_sync_skcipher(ctx->fallback); +-} +- +-struct qce_ablkcipher_def { +- unsigned long flags; +- const char *name; +- const char *drv_name; +- unsigned int blocksize; +- unsigned int ivsize; +- unsigned int min_keysize; +- unsigned int max_keysize; +-}; +- +-static const struct qce_ablkcipher_def ablkcipher_def[] = { +- { +- .flags = QCE_ALG_AES | QCE_MODE_ECB, +- .name = "ecb(aes)", +- .drv_name = "ecb-aes-qce", +- .blocksize = AES_BLOCK_SIZE, +- .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_AES | QCE_MODE_CBC, +- .name = "cbc(aes)", +- .drv_name = "cbc-aes-qce", +- .blocksize = AES_BLOCK_SIZE, +- .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_AES | QCE_MODE_CTR, +- .name = "ctr(aes)", +- .drv_name = "ctr-aes-qce", +- .blocksize = AES_BLOCK_SIZE, +- .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_AES | QCE_MODE_XTS, +- .name = "xts(aes)", +- .drv_name = "xts-aes-qce", +- .blocksize = AES_BLOCK_SIZE, +- .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_DES | QCE_MODE_ECB, +- .name = "ecb(des)", +- .drv_name = "ecb-des-qce", +- .blocksize = DES_BLOCK_SIZE, +- .ivsize = 0, +- .min_keysize = DES_KEY_SIZE, +- .max_keysize = DES_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_DES | QCE_MODE_CBC, +- .name = "cbc(des)", +- .drv_name = "cbc-des-qce", +- .blocksize = DES_BLOCK_SIZE, +- .ivsize = DES_BLOCK_SIZE, +- .min_keysize = DES_KEY_SIZE, +- .max_keysize = DES_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_3DES | QCE_MODE_ECB, +- .name = "ecb(des3_ede)", +- .drv_name = "ecb-3des-qce", +- .blocksize = DES3_EDE_BLOCK_SIZE, +- .ivsize = 0, +- .min_keysize = DES3_EDE_KEY_SIZE, +- .max_keysize = DES3_EDE_KEY_SIZE, +- }, +- { +- .flags = QCE_ALG_3DES | QCE_MODE_CBC, +- .name = "cbc(des3_ede)", +- .drv_name = "cbc-3des-qce", +- .blocksize = DES3_EDE_BLOCK_SIZE, +- .ivsize = DES3_EDE_BLOCK_SIZE, +- .min_keysize = DES3_EDE_KEY_SIZE, +- .max_keysize = DES3_EDE_KEY_SIZE, +- }, +-}; +- +-static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def, +- struct qce_device *qce) +-{ +- struct qce_alg_template *tmpl; +- struct crypto_alg *alg; +- int ret; +- +- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); +- if (!tmpl) +- return -ENOMEM; +- +- alg = &tmpl->alg.crypto; +- +- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); +- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", +- def->drv_name); +- +- alg->cra_blocksize = def->blocksize; +- alg->cra_ablkcipher.ivsize = def->ivsize; +- alg->cra_ablkcipher.min_keysize = def->min_keysize; +- alg->cra_ablkcipher.max_keysize = def->max_keysize; +- alg->cra_ablkcipher.setkey = IS_3DES(def->flags) ? qce_des3_setkey : +- IS_DES(def->flags) ? qce_des_setkey : +- qce_ablkcipher_setkey; +- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt; +- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt; +- +- alg->cra_priority = 300; +- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | +- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; +- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); +- alg->cra_alignmask = 0; +- alg->cra_type = &crypto_ablkcipher_type; +- alg->cra_module = THIS_MODULE; +- alg->cra_init = qce_ablkcipher_init; +- alg->cra_exit = qce_ablkcipher_exit; +- +- INIT_LIST_HEAD(&tmpl->entry); +- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER; +- tmpl->alg_flags = def->flags; +- tmpl->qce = qce; +- +- ret = crypto_register_alg(alg); +- if (ret) { +- kfree(tmpl); +- dev_err(qce->dev, "%s registration failed\n", alg->cra_name); +- return ret; +- } +- +- list_add_tail(&tmpl->entry, &ablkcipher_algs); +- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name); +- return 0; +-} +- +-static void qce_ablkcipher_unregister(struct qce_device *qce) +-{ +- struct qce_alg_template *tmpl, *n; +- +- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) { +- crypto_unregister_alg(&tmpl->alg.crypto); +- list_del(&tmpl->entry); +- kfree(tmpl); +- } +-} +- +-static int qce_ablkcipher_register(struct qce_device *qce) +-{ +- int ret, i; +- +- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) { +- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce); +- if (ret) +- goto err; +- } +- +- return 0; +-err: +- qce_ablkcipher_unregister(qce); +- return ret; +-} +- +-const struct qce_algo_ops ablkcipher_ops = { +- .type = CRYPTO_ALG_TYPE_ABLKCIPHER, +- .register_algs = qce_ablkcipher_register, +- .unregister_algs = qce_ablkcipher_unregister, +- .async_req_handle = qce_ablkcipher_async_req_handle, +-}; +--- /dev/null ++++ b/drivers/crypto/qce/skcipher.c +@@ -0,0 +1,440 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "cipher.h" ++ ++static LIST_HEAD(skcipher_algs); ++ ++static void qce_skcipher_done(void *data) ++{ ++ struct crypto_async_request *async_req = data; ++ struct skcipher_request *req = skcipher_request_cast(async_req); ++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); ++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); ++ struct qce_device *qce = tmpl->qce; ++ enum dma_data_direction dir_src, dir_dst; ++ u32 status; ++ int error; ++ bool diff_dst; ++ ++ diff_dst = (req->src != req->dst) ? true : false; ++ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; ++ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; ++ ++ error = qce_dma_terminate_all(&qce->dma); ++ if (error) ++ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n", ++ error); ++ ++ if (diff_dst) ++ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); ++ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); ++ ++ sg_free_table(&rctx->dst_tbl); ++ ++ error = qce_check_status(qce, &status); ++ if (error < 0) ++ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); ++ ++ qce->async_req_done(tmpl->qce, error); ++} ++ ++static int ++qce_skcipher_async_req_handle(struct crypto_async_request *async_req) ++{ ++ struct skcipher_request *req = skcipher_request_cast(async_req); ++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); ++ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req); ++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); ++ struct qce_device *qce = tmpl->qce; ++ enum dma_data_direction dir_src, dir_dst; ++ struct scatterlist *sg; ++ bool diff_dst; ++ gfp_t gfp; ++ int ret; ++ ++ rctx->iv = req->iv; ++ rctx->ivsize = crypto_skcipher_ivsize(skcipher); ++ rctx->cryptlen = req->cryptlen; ++ ++ diff_dst = (req->src != req->dst) ? true : false; ++ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; ++ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; ++ ++ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen); ++ if (diff_dst) ++ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen); ++ else ++ rctx->dst_nents = rctx->src_nents; ++ if (rctx->src_nents < 0) { ++ dev_err(qce->dev, "Invalid numbers of src SG.\n"); ++ return rctx->src_nents; ++ } ++ if (rctx->dst_nents < 0) { ++ dev_err(qce->dev, "Invalid numbers of dst SG.\n"); ++ return -rctx->dst_nents; ++ } ++ ++ rctx->dst_nents += 1; ++ ++ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? ++ GFP_KERNEL : GFP_ATOMIC; ++ ++ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); ++ if (ret) ++ return ret; ++ ++ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); ++ ++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); ++ if (IS_ERR(sg)) { ++ ret = PTR_ERR(sg); ++ goto error_free; ++ } ++ ++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); ++ if (IS_ERR(sg)) { ++ ret = PTR_ERR(sg); ++ goto error_free; ++ } ++ ++ sg_mark_end(sg); ++ rctx->dst_sg = rctx->dst_tbl.sgl; ++ ++ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); ++ if (ret < 0) ++ goto error_free; ++ ++ if (diff_dst) { ++ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); ++ if (ret < 0) ++ goto error_unmap_dst; ++ rctx->src_sg = req->src; ++ } else { ++ rctx->src_sg = rctx->dst_sg; ++ } ++ ++ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, ++ rctx->dst_sg, rctx->dst_nents, ++ qce_skcipher_done, async_req); ++ if (ret) ++ goto error_unmap_src; ++ ++ qce_dma_issue_pending(&qce->dma); ++ ++ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0); ++ if (ret) ++ goto error_terminate; ++ ++ return 0; ++ ++error_terminate: ++ qce_dma_terminate_all(&qce->dma); ++error_unmap_src: ++ if (diff_dst) ++ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); ++error_unmap_dst: ++ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); ++error_free: ++ sg_free_table(&rctx->dst_tbl); ++ return ret; ++} ++ ++static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key, ++ unsigned int keylen) ++{ ++ struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk); ++ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); ++ int ret; ++ ++ if (!key || !keylen) ++ return -EINVAL; ++ ++ switch (keylen) { ++ case AES_KEYSIZE_128: ++ case AES_KEYSIZE_256: ++ break; ++ default: ++ goto fallback; ++ } ++ ++ ctx->enc_keylen = keylen; ++ memcpy(ctx->enc_key, key, keylen); ++ return 0; ++fallback: ++ ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); ++ if (!ret) ++ ctx->enc_keylen = keylen; ++ return ret; ++} ++ ++static int qce_des_setkey(struct crypto_skcipher *ablk, const u8 *key, ++ unsigned int keylen) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); ++ int err; ++ ++ err = verify_skcipher_des_key(ablk, key); ++ if (err) ++ return err; ++ ++ ctx->enc_keylen = keylen; ++ memcpy(ctx->enc_key, key, keylen); ++ return 0; ++} ++ ++static int qce_des3_setkey(struct crypto_skcipher *ablk, const u8 *key, ++ unsigned int keylen) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); ++ int err; ++ ++ err = verify_skcipher_des3_key(ablk, key); ++ if (err) ++ return err; ++ ++ ctx->enc_keylen = keylen; ++ memcpy(ctx->enc_key, key, keylen); ++ return 0; ++} ++ ++static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt) ++{ ++ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); ++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); ++ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); ++ int ret; ++ ++ rctx->flags = tmpl->alg_flags; ++ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; ++ ++ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && ++ ctx->enc_keylen != AES_KEYSIZE_256) { ++ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); ++ ++ skcipher_request_set_sync_tfm(subreq, ctx->fallback); ++ skcipher_request_set_callback(subreq, req->base.flags, ++ NULL, NULL); ++ skcipher_request_set_crypt(subreq, req->src, req->dst, ++ req->cryptlen, req->iv); ++ ret = encrypt ? crypto_skcipher_encrypt(subreq) : ++ crypto_skcipher_decrypt(subreq); ++ skcipher_request_zero(subreq); ++ return ret; ++ } ++ ++ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); ++} ++ ++static int qce_skcipher_encrypt(struct skcipher_request *req) ++{ ++ return qce_skcipher_crypt(req, 1); ++} ++ ++static int qce_skcipher_decrypt(struct skcipher_request *req) ++{ ++ return qce_skcipher_crypt(req, 0); ++} ++ ++static int qce_skcipher_init(struct crypto_skcipher *tfm) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); ++ ++ memset(ctx, 0, sizeof(*ctx)); ++ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); ++ ++ ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base), ++ 0, CRYPTO_ALG_NEED_FALLBACK); ++ return PTR_ERR_OR_ZERO(ctx->fallback); ++} ++ ++static void qce_skcipher_exit(struct crypto_skcipher *tfm) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); ++ ++ crypto_free_sync_skcipher(ctx->fallback); ++} ++ ++struct qce_skcipher_def { ++ unsigned long flags; ++ const char *name; ++ const char *drv_name; ++ unsigned int blocksize; ++ unsigned int ivsize; ++ unsigned int min_keysize; ++ unsigned int max_keysize; ++}; ++ ++static const struct qce_skcipher_def skcipher_def[] = { ++ { ++ .flags = QCE_ALG_AES | QCE_MODE_ECB, ++ .name = "ecb(aes)", ++ .drv_name = "ecb-aes-qce", ++ .blocksize = AES_BLOCK_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_AES | QCE_MODE_CBC, ++ .name = "cbc(aes)", ++ .drv_name = "cbc-aes-qce", ++ .blocksize = AES_BLOCK_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_AES | QCE_MODE_CTR, ++ .name = "ctr(aes)", ++ .drv_name = "ctr-aes-qce", ++ .blocksize = AES_BLOCK_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_AES | QCE_MODE_XTS, ++ .name = "xts(aes)", ++ .drv_name = "xts-aes-qce", ++ .blocksize = AES_BLOCK_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_DES | QCE_MODE_ECB, ++ .name = "ecb(des)", ++ .drv_name = "ecb-des-qce", ++ .blocksize = DES_BLOCK_SIZE, ++ .ivsize = 0, ++ .min_keysize = DES_KEY_SIZE, ++ .max_keysize = DES_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_DES | QCE_MODE_CBC, ++ .name = "cbc(des)", ++ .drv_name = "cbc-des-qce", ++ .blocksize = DES_BLOCK_SIZE, ++ .ivsize = DES_BLOCK_SIZE, ++ .min_keysize = DES_KEY_SIZE, ++ .max_keysize = DES_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_3DES | QCE_MODE_ECB, ++ .name = "ecb(des3_ede)", ++ .drv_name = "ecb-3des-qce", ++ .blocksize = DES3_EDE_BLOCK_SIZE, ++ .ivsize = 0, ++ .min_keysize = DES3_EDE_KEY_SIZE, ++ .max_keysize = DES3_EDE_KEY_SIZE, ++ }, ++ { ++ .flags = QCE_ALG_3DES | QCE_MODE_CBC, ++ .name = "cbc(des3_ede)", ++ .drv_name = "cbc-3des-qce", ++ .blocksize = DES3_EDE_BLOCK_SIZE, ++ .ivsize = DES3_EDE_BLOCK_SIZE, ++ .min_keysize = DES3_EDE_KEY_SIZE, ++ .max_keysize = DES3_EDE_KEY_SIZE, ++ }, ++}; ++ ++static int qce_skcipher_register_one(const struct qce_skcipher_def *def, ++ struct qce_device *qce) ++{ ++ struct qce_alg_template *tmpl; ++ struct skcipher_alg *alg; ++ int ret; ++ ++ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); ++ if (!tmpl) ++ return -ENOMEM; ++ ++ alg = &tmpl->alg.skcipher; ++ ++ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); ++ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", ++ def->drv_name); ++ ++ alg->base.cra_blocksize = def->blocksize; ++ alg->ivsize = def->ivsize; ++ alg->min_keysize = def->min_keysize; ++ alg->max_keysize = def->max_keysize; ++ alg->setkey = IS_3DES(def->flags) ? qce_des3_setkey : ++ IS_DES(def->flags) ? qce_des_setkey : ++ qce_skcipher_setkey; ++ alg->encrypt = qce_skcipher_encrypt; ++ alg->decrypt = qce_skcipher_decrypt; ++ ++ alg->base.cra_priority = 300; ++ alg->base.cra_flags = CRYPTO_ALG_ASYNC | ++ CRYPTO_ALG_NEED_FALLBACK | ++ CRYPTO_ALG_KERN_DRIVER_ONLY; ++ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); ++ alg->base.cra_alignmask = 0; ++ alg->base.cra_module = THIS_MODULE; ++ ++ alg->init = qce_skcipher_init; ++ alg->exit = qce_skcipher_exit; ++ ++ INIT_LIST_HEAD(&tmpl->entry); ++ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; ++ tmpl->alg_flags = def->flags; ++ tmpl->qce = qce; ++ ++ ret = crypto_register_skcipher(alg); ++ if (ret) { ++ kfree(tmpl); ++ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name); ++ return ret; ++ } ++ ++ list_add_tail(&tmpl->entry, &skcipher_algs); ++ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name); ++ return 0; ++} ++ ++static void qce_skcipher_unregister(struct qce_device *qce) ++{ ++ struct qce_alg_template *tmpl, *n; ++ ++ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) { ++ crypto_unregister_skcipher(&tmpl->alg.skcipher); ++ list_del(&tmpl->entry); ++ kfree(tmpl); ++ } ++} ++ ++static int qce_skcipher_register(struct qce_device *qce) ++{ ++ int ret, i; ++ ++ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) { ++ ret = qce_skcipher_register_one(&skcipher_def[i], qce); ++ if (ret) ++ goto err; ++ } ++ ++ return 0; ++err: ++ qce_skcipher_unregister(qce); ++ return ret; ++} ++ ++const struct qce_algo_ops skcipher_ops = { ++ .type = CRYPTO_ALG_TYPE_SKCIPHER, ++ .register_algs = qce_skcipher_register, ++ .unregister_algs = qce_skcipher_unregister, ++ .async_req_handle = qce_skcipher_async_req_handle, ++}; diff --git a/target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch b/target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch new file mode 100644 index 0000000000..ac4f163f4a --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch @@ -0,0 +1,43 @@ +From bb5c863b3d3cbd10e80b2ebf409934a091058f54 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 20 Dec 2019 16:02:13 -0300 +Subject: [PATCH 02/11] crypto: qce - fix ctr-aes-qce block, chunk sizes + +Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher, +adding the definition for chucksize instead, where the underlying block +size belongs. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + drivers/crypto/qce/skcipher.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -270,6 +270,7 @@ struct qce_skcipher_def { + const char *name; + const char *drv_name; + unsigned int blocksize; ++ unsigned int chunksize; + unsigned int ivsize; + unsigned int min_keysize; + unsigned int max_keysize; +@@ -298,7 +299,8 @@ static const struct qce_skcipher_def skc + .flags = QCE_ALG_AES | QCE_MODE_CTR, + .name = "ctr(aes)", + .drv_name = "ctr-aes-qce", +- .blocksize = AES_BLOCK_SIZE, ++ .blocksize = 1, ++ .chunksize = AES_BLOCK_SIZE, + .ivsize = AES_BLOCK_SIZE, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, +@@ -368,6 +370,7 @@ static int qce_skcipher_register_one(con + def->drv_name); + + alg->base.cra_blocksize = def->blocksize; ++ alg->chunksize = def->chunksize; + alg->ivsize = def->ivsize; + alg->min_keysize = def->min_keysize; + alg->max_keysize = def->max_keysize; diff --git a/target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch b/target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch new file mode 100644 index 0000000000..4dcf1ac726 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch @@ -0,0 +1,60 @@ +From 7de4c2bd196f111e39cc60f6197654aff23ba2b4 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 20 Dec 2019 16:02:14 -0300 +Subject: [PATCH 03/11] crypto: qce - fix xts-aes-qce key sizes + +XTS-mode uses two keys, so the keysizes should be doubled in +skcipher_def, and halved when checking if it is AES-128/192/256. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + drivers/crypto/qce/skcipher.c | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -154,12 +154,13 @@ static int qce_skcipher_setkey(struct cr + { + struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk); + struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); ++ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags; + int ret; + + if (!key || !keylen) + return -EINVAL; + +- switch (keylen) { ++ switch (IS_XTS(flags) ? keylen >> 1 : keylen) { + case AES_KEYSIZE_128: + case AES_KEYSIZE_256: + break; +@@ -213,13 +214,15 @@ static int qce_skcipher_crypt(struct skc + struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); + struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); + struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); ++ int keylen; + int ret; + + rctx->flags = tmpl->alg_flags; + rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; ++ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; + +- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && +- ctx->enc_keylen != AES_KEYSIZE_256) { ++ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && ++ keylen != AES_KEYSIZE_256) { + SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); + + skcipher_request_set_sync_tfm(subreq, ctx->fallback); +@@ -311,8 +314,8 @@ static const struct qce_skcipher_def skc + .drv_name = "xts-aes-qce", + .blocksize = AES_BLOCK_SIZE, + .ivsize = AES_BLOCK_SIZE, +- .min_keysize = AES_MIN_KEY_SIZE, +- .max_keysize = AES_MAX_KEY_SIZE, ++ .min_keysize = AES_MIN_KEY_SIZE * 2, ++ .max_keysize = AES_MAX_KEY_SIZE * 2, + }, + { + .flags = QCE_ALG_DES | QCE_MODE_ECB, diff --git a/target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch b/target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch new file mode 100644 index 0000000000..2385d483f2 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch @@ -0,0 +1,85 @@ +From 3ee50c896d712dc2fc8f34c2cd1918d035e74045 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 20 Dec 2019 16:02:15 -0300 +Subject: [PATCH 04/11] crypto: qce - save a sg table slot for result buf + +When ctr-aes-qce is used for gcm-mode, an extra sg entry for the +authentication tag is present, causing trouble when the qce driver +prepares the dst-results sg table for dma. + +It computes the number of entries needed with sg_nents_for_len, leaving +out the tag entry. Then it creates a sg table with that number plus +one, used to store a result buffer. + +When copying the sg table, there's no limit to the number of entries +copied, so the extra slot is filled with the authentication tag sg. +When the driver tries to add the result sg, the list is full, and it +returns EINVAL. + +By limiting the number of sg entries copied to the dest table, the slot +for the result buffer is guaranteed to be unused. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + drivers/crypto/qce/dma.c | 6 ++++-- + drivers/crypto/qce/dma.h | 3 ++- + drivers/crypto/qce/skcipher.c | 4 ++-- + 3 files changed, 8 insertions(+), 5 deletions(-) + +--- a/drivers/crypto/qce/dma.c ++++ b/drivers/crypto/qce/dma.c +@@ -47,7 +47,8 @@ void qce_dma_release(struct qce_dma_data + } + + struct scatterlist * +-qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl) ++qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, ++ int max_ents) + { + struct scatterlist *sg = sgt->sgl, *sg_last = NULL; + +@@ -60,12 +61,13 @@ qce_sgtable_add(struct sg_table *sgt, st + if (!sg) + return ERR_PTR(-EINVAL); + +- while (new_sgl && sg) { ++ while (new_sgl && sg && max_ents) { + sg_set_page(sg, sg_page(new_sgl), new_sgl->length, + new_sgl->offset); + sg_last = sg; + sg = sg_next(sg); + new_sgl = sg_next(new_sgl); ++ max_ents--; + } + + return sg_last; +--- a/drivers/crypto/qce/dma.h ++++ b/drivers/crypto/qce/dma.h +@@ -42,6 +42,7 @@ int qce_dma_prep_sgs(struct qce_dma_data + void qce_dma_issue_pending(struct qce_dma_data *dma); + int qce_dma_terminate_all(struct qce_dma_data *dma); + struct scatterlist * +-qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add); ++qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, ++ int max_ents); + + #endif /* _DMA_H_ */ +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -95,13 +95,13 @@ qce_skcipher_async_req_handle(struct cry + + sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); + +- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); ++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); + if (IS_ERR(sg)) { + ret = PTR_ERR(sg); + goto error_free; + } + +- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); ++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); + if (IS_ERR(sg)) { + ret = PTR_ERR(sg); + goto error_free; diff --git a/target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch b/target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch new file mode 100644 index 0000000000..5efdb72c44 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch @@ -0,0 +1,31 @@ +From 3e806a12d10af2581aa26c37b58439286eab9782 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 20 Dec 2019 16:02:16 -0300 +Subject: [PATCH 05/11] crypto: qce - update the skcipher IV + +Update the IV after the completion of each cipher operation. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + drivers/crypto/qce/skcipher.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -21,6 +21,7 @@ static void qce_skcipher_done(void *data + struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); + struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); + struct qce_device *qce = tmpl->qce; ++ struct qce_result_dump *result_buf = qce->dma.result_buf; + enum dma_data_direction dir_src, dir_dst; + u32 status; + int error; +@@ -45,6 +46,7 @@ static void qce_skcipher_done(void *data + if (error < 0) + dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); + ++ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize); + qce->async_req_done(tmpl->qce, error); + } + diff --git a/target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch b/target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch new file mode 100644 index 0000000000..84aef04ef4 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch @@ -0,0 +1,54 @@ +From 8ceda883205db6dfedb82e39f67feae3b50c95a1 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 20 Dec 2019 16:02:17 -0300 +Subject: [PATCH 06/11] crypto: qce - initialize fallback only for AES + +Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where +AES-192 is not handled by the qce hardware, and don't allocate & free +the fallback skcipher for other algorithms. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + drivers/crypto/qce/skcipher.c | 17 ++++++++++++++--- + 1 file changed, 14 insertions(+), 3 deletions(-) + +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -257,7 +257,14 @@ static int qce_skcipher_init(struct cryp + + memset(ctx, 0, sizeof(*ctx)); + crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); ++ return 0; ++} ++ ++static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm) ++{ ++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); + ++ qce_skcipher_init(tfm); + ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base), + 0, CRYPTO_ALG_NEED_FALLBACK); + return PTR_ERR_OR_ZERO(ctx->fallback); +@@ -387,14 +394,18 @@ static int qce_skcipher_register_one(con + + alg->base.cra_priority = 300; + alg->base.cra_flags = CRYPTO_ALG_ASYNC | +- CRYPTO_ALG_NEED_FALLBACK | + CRYPTO_ALG_KERN_DRIVER_ONLY; + alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); + alg->base.cra_alignmask = 0; + alg->base.cra_module = THIS_MODULE; + +- alg->init = qce_skcipher_init; +- alg->exit = qce_skcipher_exit; ++ if (IS_AES(def->flags)) { ++ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK; ++ alg->init = qce_skcipher_init_fallback; ++ alg->exit = qce_skcipher_exit; ++ } else { ++ alg->init = qce_skcipher_init; ++ } + + INIT_LIST_HEAD(&tmpl->entry); + tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; diff --git a/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch b/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch new file mode 100644 index 0000000000..bcd5551f54 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch @@ -0,0 +1,419 @@ +From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 20 Dec 2019 16:02:18 -0300 +Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers + +Allow the user to choose whether to build support for all algorithms +(default), hashes-only, or skciphers-only. + +The QCE engine does not appear to scale as well as the CPU to handle +multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the +QCE handles only 2 requests in parallel. + +Ipsec throughput seems to improve when disabling either family of +algorithms, sharing the load with the CPU. Enabling skciphers-only +appears to work best. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -616,6 +616,14 @@ config CRYPTO_DEV_QCE + tristate "Qualcomm crypto engine accelerator" + depends on ARCH_QCOM || COMPILE_TEST + depends on HAS_IOMEM ++ help ++ This driver supports Qualcomm crypto engine accelerator ++ hardware. To compile this driver as a module, choose M here. The ++ module will be called qcrypto. ++ ++config CRYPTO_DEV_QCE_SKCIPHER ++ bool ++ depends on CRYPTO_DEV_QCE + select CRYPTO_AES + select CRYPTO_LIB_DES + select CRYPTO_ECB +@@ -623,10 +631,57 @@ config CRYPTO_DEV_QCE + select CRYPTO_XTS + select CRYPTO_CTR + select CRYPTO_BLKCIPHER ++ ++config CRYPTO_DEV_QCE_SHA ++ bool ++ depends on CRYPTO_DEV_QCE ++ ++choice ++ prompt "Algorithms enabled for QCE acceleration" ++ default CRYPTO_DEV_QCE_ENABLE_ALL ++ depends on CRYPTO_DEV_QCE + help +- This driver supports Qualcomm crypto engine accelerator +- hardware. To compile this driver as a module, choose M here. The +- module will be called qcrypto. ++ This option allows to choose whether to build support for all algorihtms ++ (default), hashes-only, or skciphers-only. ++ ++ The QCE engine does not appear to scale as well as the CPU to handle ++ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the ++ QCE handles only 2 requests in parallel. ++ ++ Ipsec throughput seems to improve when disabling either family of ++ algorithms, sharing the load with the CPU. Enabling skciphers-only ++ appears to work best. ++ ++ config CRYPTO_DEV_QCE_ENABLE_ALL ++ bool "All supported algorithms" ++ select CRYPTO_DEV_QCE_SKCIPHER ++ select CRYPTO_DEV_QCE_SHA ++ help ++ Enable all supported algorithms: ++ - AES (CBC, CTR, ECB, XTS) ++ - 3DES (CBC, ECB) ++ - DES (CBC, ECB) ++ - SHA1, HMAC-SHA1 ++ - SHA256, HMAC-SHA256 ++ ++ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER ++ bool "Symmetric-key ciphers only" ++ select CRYPTO_DEV_QCE_SKCIPHER ++ help ++ Enable symmetric-key ciphers only: ++ - AES (CBC, CTR, ECB, XTS) ++ - 3DES (ECB, CBC) ++ - DES (ECB, CBC) ++ ++ config CRYPTO_DEV_QCE_ENABLE_SHA ++ bool "Hash/HMAC only" ++ select CRYPTO_DEV_QCE_SHA ++ help ++ Enable hashes/HMAC algorithms only: ++ - SHA1, HMAC-SHA1 ++ - SHA256, HMAC-SHA256 ++ ++endchoice + + config CRYPTO_DEV_QCOM_RNG + tristate "Qualcomm Random Number Generator Driver" +--- a/drivers/crypto/qce/Makefile ++++ b/drivers/crypto/qce/Makefile +@@ -2,6 +2,7 @@ + obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o + qcrypto-objs := core.o \ + common.o \ +- dma.o \ +- sha.o \ +- skcipher.o ++ dma.o ++ ++qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o ++qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o +--- a/drivers/crypto/qce/common.c ++++ b/drivers/crypto/qce/common.c +@@ -45,52 +45,56 @@ qce_clear_array(struct qce_device *qce, + qce_write(qce, offset + i * sizeof(u32), 0); + } + +-static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) ++static u32 qce_config_reg(struct qce_device *qce, int little) + { +- u32 cfg = 0; ++ u32 beats = (qce->burst_size >> 3) - 1; ++ u32 pipe_pair = qce->pipe_pair_id; ++ u32 config; + +- if (IS_AES(flags)) { +- if (aes_key_size == AES_KEYSIZE_128) +- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; +- else if (aes_key_size == AES_KEYSIZE_256) +- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; +- } ++ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; ++ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | ++ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); ++ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; ++ config &= ~HIGH_SPD_EN_N_SHIFT; + +- if (IS_AES(flags)) +- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; +- else if (IS_DES(flags) || IS_3DES(flags)) +- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; ++ if (little) ++ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); + +- if (IS_DES(flags)) +- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; ++ return config; ++} + +- if (IS_3DES(flags)) +- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; ++void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) ++{ ++ __be32 *d = dst; ++ const u8 *s = src; ++ unsigned int n; + +- switch (flags & QCE_MODE_MASK) { +- case QCE_MODE_ECB: +- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; +- break; +- case QCE_MODE_CBC: +- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; +- break; +- case QCE_MODE_CTR: +- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; +- break; +- case QCE_MODE_XTS: +- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; +- break; +- case QCE_MODE_CCM: +- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; +- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; +- break; +- default: +- return ~0; ++ n = len / sizeof(u32); ++ for (; n > 0; n--) { ++ *d = cpu_to_be32p((const __u32 *) s); ++ s += sizeof(__u32); ++ d++; + } ++} + +- return cfg; ++static void qce_setup_config(struct qce_device *qce) ++{ ++ u32 config; ++ ++ /* get big endianness */ ++ config = qce_config_reg(qce, 0); ++ ++ /* clear status */ ++ qce_write(qce, REG_STATUS, 0); ++ qce_write(qce, REG_CONFIG, config); ++} ++ ++static inline void qce_crypto_go(struct qce_device *qce) ++{ ++ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); + } + ++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA + static u32 qce_auth_cfg(unsigned long flags, u32 key_size) + { + u32 cfg = 0; +@@ -137,88 +141,6 @@ static u32 qce_auth_cfg(unsigned long fl + return cfg; + } + +-static u32 qce_config_reg(struct qce_device *qce, int little) +-{ +- u32 beats = (qce->burst_size >> 3) - 1; +- u32 pipe_pair = qce->pipe_pair_id; +- u32 config; +- +- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; +- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | +- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); +- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; +- config &= ~HIGH_SPD_EN_N_SHIFT; +- +- if (little) +- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); +- +- return config; +-} +- +-void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) +-{ +- __be32 *d = dst; +- const u8 *s = src; +- unsigned int n; +- +- n = len / sizeof(u32); +- for (; n > 0; n--) { +- *d = cpu_to_be32p((const __u32 *) s); +- s += sizeof(__u32); +- d++; +- } +-} +- +-static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) +-{ +- u8 swap[QCE_AES_IV_LENGTH]; +- u32 i, j; +- +- if (ivsize > QCE_AES_IV_LENGTH) +- return; +- +- memset(swap, 0, QCE_AES_IV_LENGTH); +- +- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; +- i < QCE_AES_IV_LENGTH; i++, j--) +- swap[i] = src[j]; +- +- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); +-} +- +-static void qce_xtskey(struct qce_device *qce, const u8 *enckey, +- unsigned int enckeylen, unsigned int cryptlen) +-{ +- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; +- unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); +- unsigned int xtsdusize; +- +- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, +- enckeylen / 2); +- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); +- +- /* xts du size 512B */ +- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); +- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); +-} +- +-static void qce_setup_config(struct qce_device *qce) +-{ +- u32 config; +- +- /* get big endianness */ +- config = qce_config_reg(qce, 0); +- +- /* clear status */ +- qce_write(qce, REG_STATUS, 0); +- qce_write(qce, REG_CONFIG, config); +-} +- +-static inline void qce_crypto_go(struct qce_device *qce) +-{ +- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); +-} +- + static int qce_setup_regs_ahash(struct crypto_async_request *async_req, + u32 totallen, u32 offset) + { +@@ -303,6 +225,87 @@ go_proc: + + return 0; + } ++#endif ++ ++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER ++static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) ++{ ++ u32 cfg = 0; ++ ++ if (IS_AES(flags)) { ++ if (aes_key_size == AES_KEYSIZE_128) ++ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; ++ else if (aes_key_size == AES_KEYSIZE_256) ++ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; ++ } ++ ++ if (IS_AES(flags)) ++ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; ++ else if (IS_DES(flags) || IS_3DES(flags)) ++ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; ++ ++ if (IS_DES(flags)) ++ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; ++ ++ if (IS_3DES(flags)) ++ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; ++ ++ switch (flags & QCE_MODE_MASK) { ++ case QCE_MODE_ECB: ++ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; ++ break; ++ case QCE_MODE_CBC: ++ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; ++ break; ++ case QCE_MODE_CTR: ++ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; ++ break; ++ case QCE_MODE_XTS: ++ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; ++ break; ++ case QCE_MODE_CCM: ++ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; ++ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; ++ break; ++ default: ++ return ~0; ++ } ++ ++ return cfg; ++} ++ ++static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) ++{ ++ u8 swap[QCE_AES_IV_LENGTH]; ++ u32 i, j; ++ ++ if (ivsize > QCE_AES_IV_LENGTH) ++ return; ++ ++ memset(swap, 0, QCE_AES_IV_LENGTH); ++ ++ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; ++ i < QCE_AES_IV_LENGTH; i++, j--) ++ swap[i] = src[j]; ++ ++ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); ++} ++ ++static void qce_xtskey(struct qce_device *qce, const u8 *enckey, ++ unsigned int enckeylen, unsigned int cryptlen) ++{ ++ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; ++ unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); ++ unsigned int xtsdusize; ++ ++ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, ++ enckeylen / 2); ++ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); ++ ++ /* xts du size 512B */ ++ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); ++ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); ++} + + static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, + u32 totallen, u32 offset) +@@ -384,15 +387,20 @@ static int qce_setup_regs_skcipher(struc + + return 0; + } ++#endif + + int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen, + u32 offset) + { + switch (type) { ++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER + case CRYPTO_ALG_TYPE_SKCIPHER: + return qce_setup_regs_skcipher(async_req, totallen, offset); ++#endif ++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA + case CRYPTO_ALG_TYPE_AHASH: + return qce_setup_regs_ahash(async_req, totallen, offset); ++#endif + default: + return -EINVAL; + } +--- a/drivers/crypto/qce/core.c ++++ b/drivers/crypto/qce/core.c +@@ -22,8 +22,12 @@ + #define QCE_QUEUE_LENGTH 1 + + static const struct qce_algo_ops *qce_ops[] = { ++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER + &skcipher_ops, ++#endif ++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA + &ahash_ops, ++#endif + }; + + static void qce_unregister_algs(struct qce_device *qce) diff --git a/target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch b/target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch new file mode 100644 index 0000000000..160420b485 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch @@ -0,0 +1,89 @@ +From d6364b8128439a8c0e381f80c38667de9f15eef8 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 7 Feb 2020 12:02:25 -0300 +Subject: [PATCH 09/11] crypto: qce - use cryptlen when adding extra sgl + +The qce crypto driver appends an extra entry to the dst sgl, to maintain +private state information. + +When the gcm driver sends requests to the ctr skcipher, it passes the +authentication tag after the actual crypto payload, but it must not be +touched. + +Commit 1336c2221bee ("crypto: qce - save a sg table slot for result +buf") limited the destination sgl to avoid overwriting the +authentication tag but it assumed the tag would be in a separate sgl +entry. + +This is not always the case, so it is better to limit the length of the +destination buffer to req->cryptlen before appending the result buf. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + drivers/crypto/qce/dma.c | 11 ++++++----- + drivers/crypto/qce/dma.h | 2 +- + drivers/crypto/qce/skcipher.c | 5 +++-- + 3 files changed, 10 insertions(+), 8 deletions(-) + +--- a/drivers/crypto/qce/dma.c ++++ b/drivers/crypto/qce/dma.c +@@ -48,9 +48,10 @@ void qce_dma_release(struct qce_dma_data + + struct scatterlist * + qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, +- int max_ents) ++ unsigned int max_len) + { + struct scatterlist *sg = sgt->sgl, *sg_last = NULL; ++ unsigned int new_len; + + while (sg) { + if (!sg_page(sg)) +@@ -61,13 +62,13 @@ qce_sgtable_add(struct sg_table *sgt, st + if (!sg) + return ERR_PTR(-EINVAL); + +- while (new_sgl && sg && max_ents) { +- sg_set_page(sg, sg_page(new_sgl), new_sgl->length, +- new_sgl->offset); ++ while (new_sgl && sg && max_len) { ++ new_len = new_sgl->length > max_len ? max_len : new_sgl->length; ++ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset); + sg_last = sg; + sg = sg_next(sg); + new_sgl = sg_next(new_sgl); +- max_ents--; ++ max_len -= new_len; + } + + return sg_last; +--- a/drivers/crypto/qce/dma.h ++++ b/drivers/crypto/qce/dma.h +@@ -43,6 +43,6 @@ void qce_dma_issue_pending(struct qce_dm + int qce_dma_terminate_all(struct qce_dma_data *dma); + struct scatterlist * + qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, +- int max_ents); ++ unsigned int max_len); + + #endif /* _DMA_H_ */ +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -97,13 +97,14 @@ qce_skcipher_async_req_handle(struct cry + + sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); + +- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); ++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen); + if (IS_ERR(sg)) { + ret = PTR_ERR(sg); + goto error_free; + } + +- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); ++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, ++ QCE_RESULT_BUF_SZ); + if (IS_ERR(sg)) { + ret = PTR_ERR(sg); + goto error_free; diff --git a/target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch b/target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch new file mode 100644 index 0000000000..55d15f56b5 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch @@ -0,0 +1,113 @@ +From ce163ba0bf298f1707321ac025ef639f88e62801 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 7 Feb 2020 12:02:26 -0300 +Subject: [PATCH 10/11] crypto: qce - use AES fallback for small requests + +Process small blocks using the fallback cipher, as a workaround for an +observed failure (DMA-related, apparently) when computing the GCM ghash +key. This brings a speed gain as well, since it avoids the latency of +using the hardware engine to process small blocks. + +Using software for all 16-byte requests would be enough to make GCM +work, but to increase performance, a larger threshold would be better. +Measuring the performance of supported ciphers with openssl speed, +software matches hardware at around 768-1024 bytes. + +Considering the 256-bit ciphers, software is 2-3 times faster than qce +at 256-bytes, 30% faster at 512, and about even at 768-bytes. With +128-bit keys, the break-even point would be around 1024-bytes. + +This adds the 'aes_sw_max_len' parameter, to set the largest request +length processed by the software fallback. Its default is being set to +512 bytes, a little lower than the break-even point, to balance the cost +in CPU usage. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -683,6 +683,29 @@ choice + + endchoice + ++config CRYPTO_DEV_QCE_SW_MAX_LEN ++ int "Default maximum request size to use software for AES" ++ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER ++ default 512 ++ help ++ This sets the default maximum request size to perform AES requests ++ using software instead of the crypto engine. It can be changed by ++ setting the aes_sw_max_len parameter. ++ ++ Small blocks are processed faster in software than hardware. ++ Considering the 256-bit ciphers, software is 2-3 times faster than ++ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes. ++ With 128-bit keys, the break-even point would be around 1024-bytes. ++ ++ The default is set a little lower, to 512 bytes, to balance the ++ cost in CPU usage. The minimum recommended setting is 16-bytes ++ (1 AES block), since AES-GCM will fail if you set it lower. ++ Setting this to zero will send all requests to the hardware. ++ ++ Note that 192-bit keys are not supported by the hardware and are ++ always processed by the software fallback, and all DES requests ++ are done by the hardware. ++ + config CRYPTO_DEV_QCOM_RNG + tristate "Qualcomm Random Number Generator Driver" + depends on ARCH_QCOM || COMPILE_TEST +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -5,6 +5,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -12,6 +13,13 @@ + + #include "cipher.h" + ++static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN; ++module_param(aes_sw_max_len, uint, 0644); ++MODULE_PARM_DESC(aes_sw_max_len, ++ "Only use hardware for AES requests larger than this " ++ "[0=always use hardware; anything <16 breaks AES-GCM; default=" ++ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]"); ++ + static LIST_HEAD(skcipher_algs); + + static void qce_skcipher_done(void *data) +@@ -166,15 +174,10 @@ static int qce_skcipher_setkey(struct cr + switch (IS_XTS(flags) ? keylen >> 1 : keylen) { + case AES_KEYSIZE_128: + case AES_KEYSIZE_256: ++ memcpy(ctx->enc_key, key, keylen); + break; +- default: +- goto fallback; + } + +- ctx->enc_keylen = keylen; +- memcpy(ctx->enc_key, key, keylen); +- return 0; +-fallback: + ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); + if (!ret) + ctx->enc_keylen = keylen; +@@ -224,8 +227,9 @@ static int qce_skcipher_crypt(struct skc + rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; + keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; + +- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && +- keylen != AES_KEYSIZE_256) { ++ if (IS_AES(rctx->flags) && ++ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || ++ req->cryptlen <= aes_sw_max_len)) { + SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); + + skcipher_request_set_sync_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch b/target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch new file mode 100644 index 0000000000..18beda6296 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch @@ -0,0 +1,59 @@ +From 7f19380b2cfd412dcef2facefb3f6c62788864d7 Mon Sep 17 00:00:00 2001 +From: Eneas U de Queiroz +Date: Fri, 7 Feb 2020 12:02:27 -0300 +Subject: [PATCH 11/11] crypto: qce - handle AES-XTS cases that qce fails + +QCE hangs when presented with an AES-XTS request whose length is larger +than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the +fallback cipher handle them. + +Signed-off-by: Eneas U de Queiroz +Signed-off-by: Herbert Xu +--- + drivers/crypto/qce/common.c | 2 -- + drivers/crypto/qce/common.h | 3 +++ + drivers/crypto/qce/skcipher.c | 9 +++++++-- + 3 files changed, 10 insertions(+), 4 deletions(-) + +--- a/drivers/crypto/qce/common.c ++++ b/drivers/crypto/qce/common.c +@@ -15,8 +15,6 @@ + #include "regs-v5.h" + #include "sha.h" + +-#define QCE_SECTOR_SIZE 512 +- + static inline u32 qce_read(struct qce_device *qce, u32 offset) + { + return readl(qce->base + offset); +--- a/drivers/crypto/qce/common.h ++++ b/drivers/crypto/qce/common.h +@@ -12,6 +12,9 @@ + #include + #include + ++/* xts du size */ ++#define QCE_SECTOR_SIZE 512 ++ + /* key size in bytes */ + #define QCE_SHA_HMAC_KEY_SIZE 64 + #define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256 +--- a/drivers/crypto/qce/skcipher.c ++++ b/drivers/crypto/qce/skcipher.c +@@ -227,9 +227,14 @@ static int qce_skcipher_crypt(struct skc + rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; + keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; + ++ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and ++ * is not a multiple of it; pass such requests to the fallback ++ */ + if (IS_AES(rctx->flags) && +- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || +- req->cryptlen <= aes_sw_max_len)) { ++ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || ++ req->cryptlen <= aes_sw_max_len) || ++ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE && ++ req->cryptlen % QCE_SECTOR_SIZE))) { + SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); + + skcipher_request_set_sync_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch b/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch new file mode 100644 index 0000000000..ad09a9f250 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch @@ -0,0 +1,197 @@ +From 3c9d8f6c03a2cda1849ec3c84f82ec030d1f49ef Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 3 May 2020 22:18:22 +0200 +Subject: [PATCH] phy: add driver for Qualcomm IPQ40xx USB PHY + +Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs. +The driver sets up HS and SS phys. + +Signed-off-by: John Crispin +Signed-off-by: Robert Marko +Cc: Luka Perkov +Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr +Signed-off-by: Vinod Koul +--- + drivers/phy/qualcomm/Kconfig | 7 + + drivers/phy/qualcomm/Makefile | 1 + + drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 148 ++++++++++++++++++++ + 3 files changed, 156 insertions(+) + create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c + +--- a/drivers/phy/qualcomm/Kconfig ++++ b/drivers/phy/qualcomm/Kconfig +@@ -18,6 +18,13 @@ config PHY_QCOM_APQ8064_SATA + depends on OF + select GENERIC_PHY + ++config PHY_QCOM_IPQ4019_USB ++ tristate "Qualcomm IPQ4019 USB PHY driver" ++ depends on OF && (ARCH_QCOM || COMPILE_TEST) ++ select GENERIC_PHY ++ help ++ Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. ++ + config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM +--- a/drivers/phy/qualcomm/Makefile ++++ b/drivers/phy/qualcomm/Makefile +@@ -1,6 +1,7 @@ + # SPDX-License-Identifier: GPL-2.0 + obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o + obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o ++obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o + obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o + obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o + obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o +--- /dev/null ++++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c +@@ -0,0 +1,148 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++/* ++ * Copyright (C) 2018 John Crispin ++ * ++ * Based on code from ++ * Allwinner Technology Co., Ltd. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct ipq4019_usb_phy { ++ struct device *dev; ++ struct phy *phy; ++ void __iomem *base; ++ struct reset_control *por_rst; ++ struct reset_control *srif_rst; ++}; ++ ++static int ipq4019_ss_phy_power_off(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ reset_control_assert(phy->por_rst); ++ msleep(10); ++ ++ return 0; ++} ++ ++static int ipq4019_ss_phy_power_on(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ ipq4019_ss_phy_power_off(_phy); ++ ++ reset_control_deassert(phy->por_rst); ++ ++ return 0; ++} ++ ++static struct phy_ops ipq4019_usb_ss_phy_ops = { ++ .power_on = ipq4019_ss_phy_power_on, ++ .power_off = ipq4019_ss_phy_power_off, ++}; ++ ++static int ipq4019_hs_phy_power_off(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ reset_control_assert(phy->por_rst); ++ msleep(10); ++ ++ reset_control_assert(phy->srif_rst); ++ msleep(10); ++ ++ return 0; ++} ++ ++static int ipq4019_hs_phy_power_on(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ ipq4019_hs_phy_power_off(_phy); ++ ++ reset_control_deassert(phy->srif_rst); ++ msleep(10); ++ ++ reset_control_deassert(phy->por_rst); ++ ++ return 0; ++} ++ ++static struct phy_ops ipq4019_usb_hs_phy_ops = { ++ .power_on = ipq4019_hs_phy_power_on, ++ .power_off = ipq4019_hs_phy_power_off, ++}; ++ ++static const struct of_device_id ipq4019_usb_phy_of_match[] = { ++ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops}, ++ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops}, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match); ++ ++static int ipq4019_usb_phy_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ struct phy_provider *phy_provider; ++ struct ipq4019_usb_phy *phy; ++ ++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); ++ if (!phy) ++ return -ENOMEM; ++ ++ phy->dev = &pdev->dev; ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ phy->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(phy->base)) { ++ dev_err(dev, "failed to remap register memory\n"); ++ return PTR_ERR(phy->base); ++ } ++ ++ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); ++ if (IS_ERR(phy->por_rst)) { ++ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER) ++ dev_err(dev, "POR reset is missing\n"); ++ return PTR_ERR(phy->por_rst); ++ } ++ ++ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst"); ++ if (IS_ERR(phy->srif_rst)) ++ return PTR_ERR(phy->srif_rst); ++ ++ phy->phy = devm_phy_create(dev, NULL, of_device_get_match_data(dev)); ++ if (IS_ERR(phy->phy)) { ++ dev_err(dev, "failed to create PHY\n"); ++ return PTR_ERR(phy->phy); ++ } ++ phy_set_drvdata(phy->phy, phy); ++ ++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); ++ ++ return PTR_ERR_OR_ZERO(phy_provider); ++} ++ ++static struct platform_driver ipq4019_usb_phy_driver = { ++ .probe = ipq4019_usb_phy_probe, ++ .driver = { ++ .of_match_table = ipq4019_usb_phy_of_match, ++ .name = "ipq4019-usb-phy", ++ } ++}; ++module_platform_driver(ipq4019_usb_phy_driver); ++ ++MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); ++MODULE_AUTHOR("John Crispin "); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch b/target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch new file mode 100644 index 0000000000..5cd4ccc30f --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch @@ -0,0 +1,81 @@ +From 5b08c1d567ee8e6af94696b3e549997cbdb2bb80 Mon Sep 17 00:00:00 2001 +From: Jaiganesh Narayanan +Date: Thu, 1 Sep 2016 10:40:38 +0530 +Subject: [PATCH] pinctrl: qcom: ipq4019: add open drain support + +Signed-off-by: Jaiganesh Narayanan +[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based + WiFi APs. ] +Signed-off-by: Brian Norris +--- +https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/ + + drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1 + + drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++++ + drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++ + 3 files changed, 16 insertions(+) + +--- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c ++++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c +@@ -254,6 +254,7 @@ DECLARE_QCA_GPIO_PINS(99); + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ ++ .od_bit = 12, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ +--- a/drivers/pinctrl/qcom/pinctrl-msm.c ++++ b/drivers/pinctrl/qcom/pinctrl-msm.c +@@ -225,6 +225,10 @@ static int msm_config_reg(struct msm_pin + *bit = g->pull_bit; + *mask = 3; + break; ++ case PIN_CONFIG_DRIVE_OPEN_DRAIN: ++ *bit = g->od_bit; ++ *mask = 1; ++ break; + case PIN_CONFIG_DRIVE_STRENGTH: + *bit = g->drv_bit; + *mask = 7; +@@ -302,6 +306,12 @@ static int msm_config_group_get(struct p + if (!arg) + return -EINVAL; + break; ++ case PIN_CONFIG_DRIVE_OPEN_DRAIN: ++ /* Pin is not open-drain */ ++ if (!arg) ++ return -EINVAL; ++ arg = 1; ++ break; + case PIN_CONFIG_DRIVE_STRENGTH: + arg = msm_regval_to_drive(arg); + break; +@@ -374,6 +384,9 @@ static int msm_config_group_set(struct p + else + arg = MSM_PULL_UP; + break; ++ case PIN_CONFIG_DRIVE_OPEN_DRAIN: ++ arg = 1; ++ break; + case PIN_CONFIG_DRIVE_STRENGTH: + /* Check for invalid values */ + if (arg > 16 || arg < 2 || (arg % 2) != 0) +--- a/drivers/pinctrl/qcom/pinctrl-msm.h ++++ b/drivers/pinctrl/qcom/pinctrl-msm.h +@@ -38,6 +38,7 @@ struct msm_function { + * @mux_bit: Offset in @ctl_reg for the pinmux function selection. + * @pull_bit: Offset in @ctl_reg for the bias configuration. + * @drv_bit: Offset in @ctl_reg for the drive strength configuration. ++ * @od_bit: Offset in @ctl_reg for controlling open drain. + * @oe_bit: Offset in @ctl_reg for controlling output enable. + * @in_bit: Offset in @io_reg for the input bit value. + * @out_bit: Offset in @io_reg for the output bit value. +@@ -75,6 +76,7 @@ struct msm_pingroup { + unsigned pull_bit:5; + unsigned drv_bit:5; + ++ unsigned od_bit:5; + unsigned oe_bit:5; + unsigned in_bit:5; + unsigned out_bit:5; diff --git a/target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch b/target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch new file mode 100644 index 0000000000..97433b030e --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch @@ -0,0 +1,29 @@ +From 707745e8d4e75b638b990d67950ab292b3b8ea2a Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Mon, 16 Dec 2019 01:36:46 +0100 +Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f + +Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix. +The chip has 4MB of total capacity, divided into a total of 64 sectors, +each 64KB sized. The chip also supports 4KB large sectors. +Additionally, it supports dual and quad read modes. + +Functionality was verified on an HPE/Aruba AP-303 board. + +Signed-off-by: David Bauer +Signed-off-by: Tudor Ambarus +--- + drivers/mtd/spi-nor/spi-nor.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -2344,6 +2344,8 @@ static const struct flash_info spi_nor_i + { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, + { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, + { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, ++ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, diff --git a/target/linux/ipq40xx/patches-5.4/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch b/target/linux/ipq40xx/patches-5.4/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch deleted file mode 100644 index 415d6fff99..0000000000 --- a/target/linux/ipq40xx/patches-5.4/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Eneas U de Queiroz -Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag - -Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by -the qce driver, since they are all hardware accelerated, accessible -through a kernel driver only, and not available directly to userspace. - -Signed-off-by: Eneas U de Queiroz - ---- a/drivers/crypto/qce/ablkcipher.c -+++ b/drivers/crypto/qce/ablkcipher.c -@@ -380,7 +380,7 @@ static int qce_ablkcipher_register_one(c - - alg->cra_priority = 300; - alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK; -+ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; - alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); - alg->cra_alignmask = 0; - alg->cra_type = &crypto_ablkcipher_type; ---- a/drivers/crypto/qce/sha.c -+++ b/drivers/crypto/qce/sha.c -@@ -495,7 +495,7 @@ static int qce_ahash_register_one(const - base = &alg->halg.base; - base->cra_blocksize = def->blocksize; - base->cra_priority = 300; -- base->cra_flags = CRYPTO_ALG_ASYNC; -+ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY; - base->cra_ctxsize = sizeof(struct qce_sha_ctx); - base->cra_alignmask = 0; - base->cra_module = THIS_MODULE; diff --git a/target/linux/ipq40xx/patches-5.4/040-crypto-qce-switch-to-skcipher-API.patch b/target/linux/ipq40xx/patches-5.4/040-crypto-qce-switch-to-skcipher-API.patch deleted file mode 100644 index 4dcb942150..0000000000 --- a/target/linux/ipq40xx/patches-5.4/040-crypto-qce-switch-to-skcipher-API.patch +++ /dev/null @@ -1,993 +0,0 @@ -From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001 -From: Ard Biesheuvel -Date: Tue, 5 Nov 2019 14:28:17 +0100 -Subject: [PATCH] crypto: qce - switch to skcipher API - -Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface") -dated 20 august 2015 introduced the new skcipher API which is supposed to -replace both blkcipher and ablkcipher. While all consumers of the API have -been converted long ago, some producers of the ablkcipher remain, forcing -us to keep the ablkcipher support routines alive, along with the matching -code to expose [a]blkciphers via the skcipher API. - -So switch this driver to the skcipher API, allowing us to finally drop the -blkcipher code in the near future. - -Reviewed-by: Stanimir Varbanov -Signed-off-by: Ard Biesheuvel -Backported-to-4.19-by: Eneas U de Queiroz - ---- a/drivers/crypto/qce/Makefile -+++ b/drivers/crypto/qce/Makefile -@@ -4,4 +4,4 @@ qcrypto-objs := core.o \ - common.o \ - dma.o \ - sha.o \ -- ablkcipher.o -+ skcipher.o ---- a/drivers/crypto/qce/cipher.h -+++ b/drivers/crypto/qce/cipher.h -@@ -45,12 +45,12 @@ struct qce_cipher_reqctx { - unsigned int cryptlen; - }; - --static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm) -+static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm) - { -- struct crypto_alg *alg = tfm->__crt_alg; -- return container_of(alg, struct qce_alg_template, alg.crypto); -+ struct skcipher_alg *alg = crypto_skcipher_alg(tfm); -+ return container_of(alg, struct qce_alg_template, alg.skcipher); - } - --extern const struct qce_algo_ops ablkcipher_ops; -+extern const struct qce_algo_ops skcipher_ops; - - #endif /* _CIPHER_H_ */ ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -304,13 +304,13 @@ go_proc: - return 0; - } - --static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req, -+static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, - u32 totallen, u32 offset) - { -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); - struct qce_device *qce = tmpl->qce; - __be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0}; - __be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0}; -@@ -389,8 +389,8 @@ int qce_start(struct crypto_async_reques - u32 offset) - { - switch (type) { -- case CRYPTO_ALG_TYPE_ABLKCIPHER: -- return qce_setup_regs_ablkcipher(async_req, totallen, offset); -+ case CRYPTO_ALG_TYPE_SKCIPHER: -+ return qce_setup_regs_skcipher(async_req, totallen, offset); - case CRYPTO_ALG_TYPE_AHASH: - return qce_setup_regs_ahash(async_req, totallen, offset); - default: ---- a/drivers/crypto/qce/common.h -+++ b/drivers/crypto/qce/common.h -@@ -10,6 +10,7 @@ - #include - #include - #include -+#include - - /* key size in bytes */ - #define QCE_SHA_HMAC_KEY_SIZE 64 -@@ -79,7 +80,7 @@ struct qce_alg_template { - unsigned long alg_flags; - const u32 *std_iv; - union { -- struct crypto_alg crypto; -+ struct skcipher_alg skcipher; - struct ahash_alg ahash; - } alg; - struct qce_device *qce; ---- a/drivers/crypto/qce/core.c -+++ b/drivers/crypto/qce/core.c -@@ -22,7 +22,7 @@ - #define QCE_QUEUE_LENGTH 1 - - static const struct qce_algo_ops *qce_ops[] = { -- &ablkcipher_ops, -+ &skcipher_ops, - &ahash_ops, - }; - ---- a/drivers/crypto/qce/ablkcipher.c -+++ /dev/null -@@ -1,440 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-only --/* -- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -- */ -- --#include --#include --#include --#include --#include --#include -- --#include "cipher.h" -- --static LIST_HEAD(ablkcipher_algs); -- --static void qce_ablkcipher_done(void *data) --{ -- struct crypto_async_request *async_req = data; -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -- struct qce_device *qce = tmpl->qce; -- enum dma_data_direction dir_src, dir_dst; -- u32 status; -- int error; -- bool diff_dst; -- -- diff_dst = (req->src != req->dst) ? true : false; -- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -- -- error = qce_dma_terminate_all(&qce->dma); -- if (error) -- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n", -- error); -- -- if (diff_dst) -- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); -- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -- -- sg_free_table(&rctx->dst_tbl); -- -- error = qce_check_status(qce, &status); -- if (error < 0) -- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status); -- -- qce->async_req_done(tmpl->qce, error); --} -- --static int --qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req) --{ -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -- struct qce_device *qce = tmpl->qce; -- enum dma_data_direction dir_src, dir_dst; -- struct scatterlist *sg; -- bool diff_dst; -- gfp_t gfp; -- int ret; -- -- rctx->iv = req->info; -- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher); -- rctx->cryptlen = req->nbytes; -- -- diff_dst = (req->src != req->dst) ? true : false; -- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -- -- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes); -- if (diff_dst) -- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes); -- else -- rctx->dst_nents = rctx->src_nents; -- if (rctx->src_nents < 0) { -- dev_err(qce->dev, "Invalid numbers of src SG.\n"); -- return rctx->src_nents; -- } -- if (rctx->dst_nents < 0) { -- dev_err(qce->dev, "Invalid numbers of dst SG.\n"); -- return -rctx->dst_nents; -- } -- -- rctx->dst_nents += 1; -- -- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? -- GFP_KERNEL : GFP_ATOMIC; -- -- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); -- if (ret) -- return ret; -- -- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); -- -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -- if (IS_ERR(sg)) { -- ret = PTR_ERR(sg); -- goto error_free; -- } -- -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -- if (IS_ERR(sg)) { -- ret = PTR_ERR(sg); -- goto error_free; -- } -- -- sg_mark_end(sg); -- rctx->dst_sg = rctx->dst_tbl.sgl; -- -- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -- if (ret < 0) -- goto error_free; -- -- if (diff_dst) { -- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); -- if (ret < 0) -- goto error_unmap_dst; -- rctx->src_sg = req->src; -- } else { -- rctx->src_sg = rctx->dst_sg; -- } -- -- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, -- rctx->dst_sg, rctx->dst_nents, -- qce_ablkcipher_done, async_req); -- if (ret) -- goto error_unmap_src; -- -- qce_dma_issue_pending(&qce->dma); -- -- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0); -- if (ret) -- goto error_terminate; -- -- return 0; -- --error_terminate: -- qce_dma_terminate_all(&qce->dma); --error_unmap_src: -- if (diff_dst) -- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); --error_unmap_dst: -- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); --error_free: -- sg_free_table(&rctx->dst_tbl); -- return ret; --} -- --static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key, -- unsigned int keylen) --{ -- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk); -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- int ret; -- -- if (!key || !keylen) -- return -EINVAL; -- -- switch (keylen) { -- case AES_KEYSIZE_128: -- case AES_KEYSIZE_256: -- break; -- default: -- goto fallback; -- } -- -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --fallback: -- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); -- if (!ret) -- ctx->enc_keylen = keylen; -- return ret; --} -- --static int qce_des_setkey(struct crypto_ablkcipher *ablk, const u8 *key, -- unsigned int keylen) --{ -- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk); -- int err; -- -- err = verify_ablkcipher_des_key(ablk, key); -- if (err) -- return err; -- -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --} -- --static int qce_des3_setkey(struct crypto_ablkcipher *ablk, const u8 *key, -- unsigned int keylen) --{ -- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk); -- int err; -- -- err = verify_ablkcipher_des3_key(ablk, key); -- if (err) -- return err; -- -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --} -- --static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt) --{ -- struct crypto_tfm *tfm = -- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req)); -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -- int ret; -- -- rctx->flags = tmpl->alg_flags; -- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -- -- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -- ctx->enc_keylen != AES_KEYSIZE_256) { -- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); -- -- skcipher_request_set_sync_tfm(subreq, ctx->fallback); -- skcipher_request_set_callback(subreq, req->base.flags, -- NULL, NULL); -- skcipher_request_set_crypt(subreq, req->src, req->dst, -- req->nbytes, req->info); -- ret = encrypt ? crypto_skcipher_encrypt(subreq) : -- crypto_skcipher_decrypt(subreq); -- skcipher_request_zero(subreq); -- return ret; -- } -- -- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); --} -- --static int qce_ablkcipher_encrypt(struct ablkcipher_request *req) --{ -- return qce_ablkcipher_crypt(req, 1); --} -- --static int qce_ablkcipher_decrypt(struct ablkcipher_request *req) --{ -- return qce_ablkcipher_crypt(req, 0); --} -- --static int qce_ablkcipher_init(struct crypto_tfm *tfm) --{ -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- -- memset(ctx, 0, sizeof(*ctx)); -- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx); -- -- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(tfm), -- 0, CRYPTO_ALG_NEED_FALLBACK); -- return PTR_ERR_OR_ZERO(ctx->fallback); --} -- --static void qce_ablkcipher_exit(struct crypto_tfm *tfm) --{ -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- -- crypto_free_sync_skcipher(ctx->fallback); --} -- --struct qce_ablkcipher_def { -- unsigned long flags; -- const char *name; -- const char *drv_name; -- unsigned int blocksize; -- unsigned int ivsize; -- unsigned int min_keysize; -- unsigned int max_keysize; --}; -- --static const struct qce_ablkcipher_def ablkcipher_def[] = { -- { -- .flags = QCE_ALG_AES | QCE_MODE_ECB, -- .name = "ecb(aes)", -- .drv_name = "ecb-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_CBC, -- .name = "cbc(aes)", -- .drv_name = "cbc-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_CTR, -- .name = "ctr(aes)", -- .drv_name = "ctr-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_XTS, -- .name = "xts(aes)", -- .drv_name = "xts-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_DES | QCE_MODE_ECB, -- .name = "ecb(des)", -- .drv_name = "ecb-des-qce", -- .blocksize = DES_BLOCK_SIZE, -- .ivsize = 0, -- .min_keysize = DES_KEY_SIZE, -- .max_keysize = DES_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_DES | QCE_MODE_CBC, -- .name = "cbc(des)", -- .drv_name = "cbc-des-qce", -- .blocksize = DES_BLOCK_SIZE, -- .ivsize = DES_BLOCK_SIZE, -- .min_keysize = DES_KEY_SIZE, -- .max_keysize = DES_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_3DES | QCE_MODE_ECB, -- .name = "ecb(des3_ede)", -- .drv_name = "ecb-3des-qce", -- .blocksize = DES3_EDE_BLOCK_SIZE, -- .ivsize = 0, -- .min_keysize = DES3_EDE_KEY_SIZE, -- .max_keysize = DES3_EDE_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_3DES | QCE_MODE_CBC, -- .name = "cbc(des3_ede)", -- .drv_name = "cbc-3des-qce", -- .blocksize = DES3_EDE_BLOCK_SIZE, -- .ivsize = DES3_EDE_BLOCK_SIZE, -- .min_keysize = DES3_EDE_KEY_SIZE, -- .max_keysize = DES3_EDE_KEY_SIZE, -- }, --}; -- --static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def, -- struct qce_device *qce) --{ -- struct qce_alg_template *tmpl; -- struct crypto_alg *alg; -- int ret; -- -- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); -- if (!tmpl) -- return -ENOMEM; -- -- alg = &tmpl->alg.crypto; -- -- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); -- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", -- def->drv_name); -- -- alg->cra_blocksize = def->blocksize; -- alg->cra_ablkcipher.ivsize = def->ivsize; -- alg->cra_ablkcipher.min_keysize = def->min_keysize; -- alg->cra_ablkcipher.max_keysize = def->max_keysize; -- alg->cra_ablkcipher.setkey = IS_3DES(def->flags) ? qce_des3_setkey : -- IS_DES(def->flags) ? qce_des_setkey : -- qce_ablkcipher_setkey; -- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt; -- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt; -- -- alg->cra_priority = 300; -- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; -- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); -- alg->cra_alignmask = 0; -- alg->cra_type = &crypto_ablkcipher_type; -- alg->cra_module = THIS_MODULE; -- alg->cra_init = qce_ablkcipher_init; -- alg->cra_exit = qce_ablkcipher_exit; -- -- INIT_LIST_HEAD(&tmpl->entry); -- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER; -- tmpl->alg_flags = def->flags; -- tmpl->qce = qce; -- -- ret = crypto_register_alg(alg); -- if (ret) { -- kfree(tmpl); -- dev_err(qce->dev, "%s registration failed\n", alg->cra_name); -- return ret; -- } -- -- list_add_tail(&tmpl->entry, &ablkcipher_algs); -- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name); -- return 0; --} -- --static void qce_ablkcipher_unregister(struct qce_device *qce) --{ -- struct qce_alg_template *tmpl, *n; -- -- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) { -- crypto_unregister_alg(&tmpl->alg.crypto); -- list_del(&tmpl->entry); -- kfree(tmpl); -- } --} -- --static int qce_ablkcipher_register(struct qce_device *qce) --{ -- int ret, i; -- -- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) { -- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce); -- if (ret) -- goto err; -- } -- -- return 0; --err: -- qce_ablkcipher_unregister(qce); -- return ret; --} -- --const struct qce_algo_ops ablkcipher_ops = { -- .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -- .register_algs = qce_ablkcipher_register, -- .unregister_algs = qce_ablkcipher_unregister, -- .async_req_handle = qce_ablkcipher_async_req_handle, --}; ---- /dev/null -+++ b/drivers/crypto/qce/skcipher.c -@@ -0,0 +1,440 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* -+ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "cipher.h" -+ -+static LIST_HEAD(skcipher_algs); -+ -+static void qce_skcipher_done(void *data) -+{ -+ struct crypto_async_request *async_req = data; -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); -+ struct qce_device *qce = tmpl->qce; -+ enum dma_data_direction dir_src, dir_dst; -+ u32 status; -+ int error; -+ bool diff_dst; -+ -+ diff_dst = (req->src != req->dst) ? true : false; -+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -+ -+ error = qce_dma_terminate_all(&qce->dma); -+ if (error) -+ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n", -+ error); -+ -+ if (diff_dst) -+ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); -+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+ -+ sg_free_table(&rctx->dst_tbl); -+ -+ error = qce_check_status(qce, &status); -+ if (error < 0) -+ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); -+ -+ qce->async_req_done(tmpl->qce, error); -+} -+ -+static int -+qce_skcipher_async_req_handle(struct crypto_async_request *async_req) -+{ -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); -+ struct qce_device *qce = tmpl->qce; -+ enum dma_data_direction dir_src, dir_dst; -+ struct scatterlist *sg; -+ bool diff_dst; -+ gfp_t gfp; -+ int ret; -+ -+ rctx->iv = req->iv; -+ rctx->ivsize = crypto_skcipher_ivsize(skcipher); -+ rctx->cryptlen = req->cryptlen; -+ -+ diff_dst = (req->src != req->dst) ? true : false; -+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -+ -+ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen); -+ if (diff_dst) -+ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen); -+ else -+ rctx->dst_nents = rctx->src_nents; -+ if (rctx->src_nents < 0) { -+ dev_err(qce->dev, "Invalid numbers of src SG.\n"); -+ return rctx->src_nents; -+ } -+ if (rctx->dst_nents < 0) { -+ dev_err(qce->dev, "Invalid numbers of dst SG.\n"); -+ return -rctx->dst_nents; -+ } -+ -+ rctx->dst_nents += 1; -+ -+ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? -+ GFP_KERNEL : GFP_ATOMIC; -+ -+ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); -+ if (ret) -+ return ret; -+ -+ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); -+ -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -+ if (IS_ERR(sg)) { -+ ret = PTR_ERR(sg); -+ goto error_free; -+ } -+ -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -+ if (IS_ERR(sg)) { -+ ret = PTR_ERR(sg); -+ goto error_free; -+ } -+ -+ sg_mark_end(sg); -+ rctx->dst_sg = rctx->dst_tbl.sgl; -+ -+ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+ if (ret < 0) -+ goto error_free; -+ -+ if (diff_dst) { -+ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); -+ if (ret < 0) -+ goto error_unmap_dst; -+ rctx->src_sg = req->src; -+ } else { -+ rctx->src_sg = rctx->dst_sg; -+ } -+ -+ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, -+ rctx->dst_sg, rctx->dst_nents, -+ qce_skcipher_done, async_req); -+ if (ret) -+ goto error_unmap_src; -+ -+ qce_dma_issue_pending(&qce->dma); -+ -+ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0); -+ if (ret) -+ goto error_terminate; -+ -+ return 0; -+ -+error_terminate: -+ qce_dma_terminate_all(&qce->dma); -+error_unmap_src: -+ if (diff_dst) -+ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); -+error_unmap_dst: -+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+error_free: -+ sg_free_table(&rctx->dst_tbl); -+ return ret; -+} -+ -+static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key, -+ unsigned int keylen) -+{ -+ struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk); -+ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ int ret; -+ -+ if (!key || !keylen) -+ return -EINVAL; -+ -+ switch (keylen) { -+ case AES_KEYSIZE_128: -+ case AES_KEYSIZE_256: -+ break; -+ default: -+ goto fallback; -+ } -+ -+ ctx->enc_keylen = keylen; -+ memcpy(ctx->enc_key, key, keylen); -+ return 0; -+fallback: -+ ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); -+ if (!ret) -+ ctx->enc_keylen = keylen; -+ return ret; -+} -+ -+static int qce_des_setkey(struct crypto_skcipher *ablk, const u8 *key, -+ unsigned int keylen) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); -+ int err; -+ -+ err = verify_skcipher_des_key(ablk, key); -+ if (err) -+ return err; -+ -+ ctx->enc_keylen = keylen; -+ memcpy(ctx->enc_key, key, keylen); -+ return 0; -+} -+ -+static int qce_des3_setkey(struct crypto_skcipher *ablk, const u8 *key, -+ unsigned int keylen) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); -+ int err; -+ -+ err = verify_skcipher_des3_key(ablk, key); -+ if (err) -+ return err; -+ -+ ctx->enc_keylen = keylen; -+ memcpy(ctx->enc_key, key, keylen); -+ return 0; -+} -+ -+static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt) -+{ -+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -+ int ret; -+ -+ rctx->flags = tmpl->alg_flags; -+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -+ -+ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -+ ctx->enc_keylen != AES_KEYSIZE_256) { -+ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); -+ -+ skcipher_request_set_sync_tfm(subreq, ctx->fallback); -+ skcipher_request_set_callback(subreq, req->base.flags, -+ NULL, NULL); -+ skcipher_request_set_crypt(subreq, req->src, req->dst, -+ req->cryptlen, req->iv); -+ ret = encrypt ? crypto_skcipher_encrypt(subreq) : -+ crypto_skcipher_decrypt(subreq); -+ skcipher_request_zero(subreq); -+ return ret; -+ } -+ -+ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); -+} -+ -+static int qce_skcipher_encrypt(struct skcipher_request *req) -+{ -+ return qce_skcipher_crypt(req, 1); -+} -+ -+static int qce_skcipher_decrypt(struct skcipher_request *req) -+{ -+ return qce_skcipher_crypt(req, 0); -+} -+ -+static int qce_skcipher_init(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ -+ memset(ctx, 0, sizeof(*ctx)); -+ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); -+ -+ ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base), -+ 0, CRYPTO_ALG_NEED_FALLBACK); -+ return PTR_ERR_OR_ZERO(ctx->fallback); -+} -+ -+static void qce_skcipher_exit(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ -+ crypto_free_sync_skcipher(ctx->fallback); -+} -+ -+struct qce_skcipher_def { -+ unsigned long flags; -+ const char *name; -+ const char *drv_name; -+ unsigned int blocksize; -+ unsigned int ivsize; -+ unsigned int min_keysize; -+ unsigned int max_keysize; -+}; -+ -+static const struct qce_skcipher_def skcipher_def[] = { -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_ECB, -+ .name = "ecb(aes)", -+ .drv_name = "ecb-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_CBC, -+ .name = "cbc(aes)", -+ .drv_name = "cbc-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_CTR, -+ .name = "ctr(aes)", -+ .drv_name = "ctr-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_XTS, -+ .name = "xts(aes)", -+ .drv_name = "xts-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_DES | QCE_MODE_ECB, -+ .name = "ecb(des)", -+ .drv_name = "ecb-des-qce", -+ .blocksize = DES_BLOCK_SIZE, -+ .ivsize = 0, -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_DES | QCE_MODE_CBC, -+ .name = "cbc(des)", -+ .drv_name = "cbc-des-qce", -+ .blocksize = DES_BLOCK_SIZE, -+ .ivsize = DES_BLOCK_SIZE, -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_3DES | QCE_MODE_ECB, -+ .name = "ecb(des3_ede)", -+ .drv_name = "ecb-3des-qce", -+ .blocksize = DES3_EDE_BLOCK_SIZE, -+ .ivsize = 0, -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_3DES | QCE_MODE_CBC, -+ .name = "cbc(des3_ede)", -+ .drv_name = "cbc-3des-qce", -+ .blocksize = DES3_EDE_BLOCK_SIZE, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ }, -+}; -+ -+static int qce_skcipher_register_one(const struct qce_skcipher_def *def, -+ struct qce_device *qce) -+{ -+ struct qce_alg_template *tmpl; -+ struct skcipher_alg *alg; -+ int ret; -+ -+ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); -+ if (!tmpl) -+ return -ENOMEM; -+ -+ alg = &tmpl->alg.skcipher; -+ -+ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); -+ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", -+ def->drv_name); -+ -+ alg->base.cra_blocksize = def->blocksize; -+ alg->ivsize = def->ivsize; -+ alg->min_keysize = def->min_keysize; -+ alg->max_keysize = def->max_keysize; -+ alg->setkey = IS_3DES(def->flags) ? qce_des3_setkey : -+ IS_DES(def->flags) ? qce_des_setkey : -+ qce_skcipher_setkey; -+ alg->encrypt = qce_skcipher_encrypt; -+ alg->decrypt = qce_skcipher_decrypt; -+ -+ alg->base.cra_priority = 300; -+ alg->base.cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_NEED_FALLBACK | -+ CRYPTO_ALG_KERN_DRIVER_ONLY; -+ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); -+ alg->base.cra_alignmask = 0; -+ alg->base.cra_module = THIS_MODULE; -+ -+ alg->init = qce_skcipher_init; -+ alg->exit = qce_skcipher_exit; -+ -+ INIT_LIST_HEAD(&tmpl->entry); -+ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; -+ tmpl->alg_flags = def->flags; -+ tmpl->qce = qce; -+ -+ ret = crypto_register_skcipher(alg); -+ if (ret) { -+ kfree(tmpl); -+ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name); -+ return ret; -+ } -+ -+ list_add_tail(&tmpl->entry, &skcipher_algs); -+ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name); -+ return 0; -+} -+ -+static void qce_skcipher_unregister(struct qce_device *qce) -+{ -+ struct qce_alg_template *tmpl, *n; -+ -+ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) { -+ crypto_unregister_skcipher(&tmpl->alg.skcipher); -+ list_del(&tmpl->entry); -+ kfree(tmpl); -+ } -+} -+ -+static int qce_skcipher_register(struct qce_device *qce) -+{ -+ int ret, i; -+ -+ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) { -+ ret = qce_skcipher_register_one(&skcipher_def[i], qce); -+ if (ret) -+ goto err; -+ } -+ -+ return 0; -+err: -+ qce_skcipher_unregister(qce); -+ return ret; -+} -+ -+const struct qce_algo_ops skcipher_ops = { -+ .type = CRYPTO_ALG_TYPE_SKCIPHER, -+ .register_algs = qce_skcipher_register, -+ .unregister_algs = qce_skcipher_unregister, -+ .async_req_handle = qce_skcipher_async_req_handle, -+}; diff --git a/target/linux/ipq40xx/patches-5.4/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch b/target/linux/ipq40xx/patches-5.4/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch deleted file mode 100644 index ac4f163f4a..0000000000 --- a/target/linux/ipq40xx/patches-5.4/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch +++ /dev/null @@ -1,43 +0,0 @@ -From bb5c863b3d3cbd10e80b2ebf409934a091058f54 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:13 -0300 -Subject: [PATCH 02/11] crypto: qce - fix ctr-aes-qce block, chunk sizes - -Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher, -adding the definition for chucksize instead, where the underlying block -size belongs. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/skcipher.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -270,6 +270,7 @@ struct qce_skcipher_def { - const char *name; - const char *drv_name; - unsigned int blocksize; -+ unsigned int chunksize; - unsigned int ivsize; - unsigned int min_keysize; - unsigned int max_keysize; -@@ -298,7 +299,8 @@ static const struct qce_skcipher_def skc - .flags = QCE_ALG_AES | QCE_MODE_CTR, - .name = "ctr(aes)", - .drv_name = "ctr-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -+ .blocksize = 1, -+ .chunksize = AES_BLOCK_SIZE, - .ivsize = AES_BLOCK_SIZE, - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, -@@ -368,6 +370,7 @@ static int qce_skcipher_register_one(con - def->drv_name); - - alg->base.cra_blocksize = def->blocksize; -+ alg->chunksize = def->chunksize; - alg->ivsize = def->ivsize; - alg->min_keysize = def->min_keysize; - alg->max_keysize = def->max_keysize; diff --git a/target/linux/ipq40xx/patches-5.4/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch b/target/linux/ipq40xx/patches-5.4/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch deleted file mode 100644 index 4dcf1ac726..0000000000 --- a/target/linux/ipq40xx/patches-5.4/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 7de4c2bd196f111e39cc60f6197654aff23ba2b4 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:14 -0300 -Subject: [PATCH 03/11] crypto: qce - fix xts-aes-qce key sizes - -XTS-mode uses two keys, so the keysizes should be doubled in -skcipher_def, and halved when checking if it is AES-128/192/256. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/skcipher.c | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -154,12 +154,13 @@ static int qce_skcipher_setkey(struct cr - { - struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk); - struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags; - int ret; - - if (!key || !keylen) - return -EINVAL; - -- switch (keylen) { -+ switch (IS_XTS(flags) ? keylen >> 1 : keylen) { - case AES_KEYSIZE_128: - case AES_KEYSIZE_256: - break; -@@ -213,13 +214,15 @@ static int qce_skcipher_crypt(struct skc - struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); - struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -+ int keylen; - int ret; - - rctx->flags = tmpl->alg_flags; - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -+ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -- ctx->enc_keylen != AES_KEYSIZE_256) { -+ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && -+ keylen != AES_KEYSIZE_256) { - SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_sync_tfm(subreq, ctx->fallback); -@@ -311,8 +314,8 @@ static const struct qce_skcipher_def skc - .drv_name = "xts-aes-qce", - .blocksize = AES_BLOCK_SIZE, - .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE * 2, -+ .max_keysize = AES_MAX_KEY_SIZE * 2, - }, - { - .flags = QCE_ALG_DES | QCE_MODE_ECB, diff --git a/target/linux/ipq40xx/patches-5.4/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch b/target/linux/ipq40xx/patches-5.4/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch deleted file mode 100644 index 2385d483f2..0000000000 --- a/target/linux/ipq40xx/patches-5.4/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 3ee50c896d712dc2fc8f34c2cd1918d035e74045 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:15 -0300 -Subject: [PATCH 04/11] crypto: qce - save a sg table slot for result buf - -When ctr-aes-qce is used for gcm-mode, an extra sg entry for the -authentication tag is present, causing trouble when the qce driver -prepares the dst-results sg table for dma. - -It computes the number of entries needed with sg_nents_for_len, leaving -out the tag entry. Then it creates a sg table with that number plus -one, used to store a result buffer. - -When copying the sg table, there's no limit to the number of entries -copied, so the extra slot is filled with the authentication tag sg. -When the driver tries to add the result sg, the list is full, and it -returns EINVAL. - -By limiting the number of sg entries copied to the dest table, the slot -for the result buffer is guaranteed to be unused. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/dma.c | 6 ++++-- - drivers/crypto/qce/dma.h | 3 ++- - drivers/crypto/qce/skcipher.c | 4 ++-- - 3 files changed, 8 insertions(+), 5 deletions(-) - ---- a/drivers/crypto/qce/dma.c -+++ b/drivers/crypto/qce/dma.c -@@ -47,7 +47,8 @@ void qce_dma_release(struct qce_dma_data - } - - struct scatterlist * --qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl) -+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, -+ int max_ents) - { - struct scatterlist *sg = sgt->sgl, *sg_last = NULL; - -@@ -60,12 +61,13 @@ qce_sgtable_add(struct sg_table *sgt, st - if (!sg) - return ERR_PTR(-EINVAL); - -- while (new_sgl && sg) { -+ while (new_sgl && sg && max_ents) { - sg_set_page(sg, sg_page(new_sgl), new_sgl->length, - new_sgl->offset); - sg_last = sg; - sg = sg_next(sg); - new_sgl = sg_next(new_sgl); -+ max_ents--; - } - - return sg_last; ---- a/drivers/crypto/qce/dma.h -+++ b/drivers/crypto/qce/dma.h -@@ -42,6 +42,7 @@ int qce_dma_prep_sgs(struct qce_dma_data - void qce_dma_issue_pending(struct qce_dma_data *dma); - int qce_dma_terminate_all(struct qce_dma_data *dma); - struct scatterlist * --qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add); -+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, -+ int max_ents); - - #endif /* _DMA_H_ */ ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -95,13 +95,13 @@ qce_skcipher_async_req_handle(struct cry - - sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); - -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; - } - -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; diff --git a/target/linux/ipq40xx/patches-5.4/044-crypto-qce-update-the-skcipher-IV.patch b/target/linux/ipq40xx/patches-5.4/044-crypto-qce-update-the-skcipher-IV.patch deleted file mode 100644 index 5efdb72c44..0000000000 --- a/target/linux/ipq40xx/patches-5.4/044-crypto-qce-update-the-skcipher-IV.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 3e806a12d10af2581aa26c37b58439286eab9782 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:16 -0300 -Subject: [PATCH 05/11] crypto: qce - update the skcipher IV - -Update the IV after the completion of each cipher operation. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/skcipher.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -21,6 +21,7 @@ static void qce_skcipher_done(void *data - struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); - struct qce_device *qce = tmpl->qce; -+ struct qce_result_dump *result_buf = qce->dma.result_buf; - enum dma_data_direction dir_src, dir_dst; - u32 status; - int error; -@@ -45,6 +46,7 @@ static void qce_skcipher_done(void *data - if (error < 0) - dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); - -+ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize); - qce->async_req_done(tmpl->qce, error); - } - diff --git a/target/linux/ipq40xx/patches-5.4/046-crypto-qce-initialize-fallback-only-for-AES.patch b/target/linux/ipq40xx/patches-5.4/046-crypto-qce-initialize-fallback-only-for-AES.patch deleted file mode 100644 index 84aef04ef4..0000000000 --- a/target/linux/ipq40xx/patches-5.4/046-crypto-qce-initialize-fallback-only-for-AES.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 8ceda883205db6dfedb82e39f67feae3b50c95a1 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:17 -0300 -Subject: [PATCH 06/11] crypto: qce - initialize fallback only for AES - -Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where -AES-192 is not handled by the qce hardware, and don't allocate & free -the fallback skcipher for other algorithms. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/skcipher.c | 17 ++++++++++++++--- - 1 file changed, 14 insertions(+), 3 deletions(-) - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -257,7 +257,14 @@ static int qce_skcipher_init(struct cryp - - memset(ctx, 0, sizeof(*ctx)); - crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); -+ return 0; -+} -+ -+static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); - -+ qce_skcipher_init(tfm); - ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base), - 0, CRYPTO_ALG_NEED_FALLBACK); - return PTR_ERR_OR_ZERO(ctx->fallback); -@@ -387,14 +394,18 @@ static int qce_skcipher_register_one(con - - alg->base.cra_priority = 300; - alg->base.cra_flags = CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK | - CRYPTO_ALG_KERN_DRIVER_ONLY; - alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); - alg->base.cra_alignmask = 0; - alg->base.cra_module = THIS_MODULE; - -- alg->init = qce_skcipher_init; -- alg->exit = qce_skcipher_exit; -+ if (IS_AES(def->flags)) { -+ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK; -+ alg->init = qce_skcipher_init_fallback; -+ alg->exit = qce_skcipher_exit; -+ } else { -+ alg->init = qce_skcipher_init; -+ } - - INIT_LIST_HEAD(&tmpl->entry); - tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; diff --git a/target/linux/ipq40xx/patches-5.4/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch b/target/linux/ipq40xx/patches-5.4/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch deleted file mode 100644 index 160420b485..0000000000 --- a/target/linux/ipq40xx/patches-5.4/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch +++ /dev/null @@ -1,89 +0,0 @@ -From d6364b8128439a8c0e381f80c38667de9f15eef8 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 7 Feb 2020 12:02:25 -0300 -Subject: [PATCH 09/11] crypto: qce - use cryptlen when adding extra sgl - -The qce crypto driver appends an extra entry to the dst sgl, to maintain -private state information. - -When the gcm driver sends requests to the ctr skcipher, it passes the -authentication tag after the actual crypto payload, but it must not be -touched. - -Commit 1336c2221bee ("crypto: qce - save a sg table slot for result -buf") limited the destination sgl to avoid overwriting the -authentication tag but it assumed the tag would be in a separate sgl -entry. - -This is not always the case, so it is better to limit the length of the -destination buffer to req->cryptlen before appending the result buf. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/dma.c | 11 ++++++----- - drivers/crypto/qce/dma.h | 2 +- - drivers/crypto/qce/skcipher.c | 5 +++-- - 3 files changed, 10 insertions(+), 8 deletions(-) - ---- a/drivers/crypto/qce/dma.c -+++ b/drivers/crypto/qce/dma.c -@@ -48,9 +48,10 @@ void qce_dma_release(struct qce_dma_data - - struct scatterlist * - qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, -- int max_ents) -+ unsigned int max_len) - { - struct scatterlist *sg = sgt->sgl, *sg_last = NULL; -+ unsigned int new_len; - - while (sg) { - if (!sg_page(sg)) -@@ -61,13 +62,13 @@ qce_sgtable_add(struct sg_table *sgt, st - if (!sg) - return ERR_PTR(-EINVAL); - -- while (new_sgl && sg && max_ents) { -- sg_set_page(sg, sg_page(new_sgl), new_sgl->length, -- new_sgl->offset); -+ while (new_sgl && sg && max_len) { -+ new_len = new_sgl->length > max_len ? max_len : new_sgl->length; -+ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset); - sg_last = sg; - sg = sg_next(sg); - new_sgl = sg_next(new_sgl); -- max_ents--; -+ max_len -= new_len; - } - - return sg_last; ---- a/drivers/crypto/qce/dma.h -+++ b/drivers/crypto/qce/dma.h -@@ -43,6 +43,6 @@ void qce_dma_issue_pending(struct qce_dm - int qce_dma_terminate_all(struct qce_dma_data *dma); - struct scatterlist * - qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, -- int max_ents); -+ unsigned int max_len); - - #endif /* _DMA_H_ */ ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -97,13 +97,14 @@ qce_skcipher_async_req_handle(struct cry - - sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); - -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; - } - -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, -+ QCE_RESULT_BUF_SZ); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; diff --git a/target/linux/ipq40xx/patches-5.4/048-crypto-qce-use-AES-fallback-for-small-requests.patch b/target/linux/ipq40xx/patches-5.4/048-crypto-qce-use-AES-fallback-for-small-requests.patch deleted file mode 100644 index d9a6c4dff9..0000000000 --- a/target/linux/ipq40xx/patches-5.4/048-crypto-qce-use-AES-fallback-for-small-requests.patch +++ /dev/null @@ -1,113 +0,0 @@ -From ce163ba0bf298f1707321ac025ef639f88e62801 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 7 Feb 2020 12:02:26 -0300 -Subject: [PATCH 10/11] crypto: qce - use AES fallback for small requests - -Process small blocks using the fallback cipher, as a workaround for an -observed failure (DMA-related, apparently) when computing the GCM ghash -key. This brings a speed gain as well, since it avoids the latency of -using the hardware engine to process small blocks. - -Using software for all 16-byte requests would be enough to make GCM -work, but to increase performance, a larger threshold would be better. -Measuring the performance of supported ciphers with openssl speed, -software matches hardware at around 768-1024 bytes. - -Considering the 256-bit ciphers, software is 2-3 times faster than qce -at 256-bytes, 30% faster at 512, and about even at 768-bytes. With -128-bit keys, the break-even point would be around 1024-bytes. - -This adds the 'aes_sw_max_len' parameter, to set the largest request -length processed by the software fallback. Its default is being set to -512 bytes, a little lower than the break-even point, to balance the cost -in CPU usage. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -628,6 +628,29 @@ config CRYPTO_DEV_QCE - hardware. To compile this driver as a module, choose M here. The - module will be called qcrypto. - -+config CRYPTO_DEV_QCE_SW_MAX_LEN -+ int "Default maximum request size to use software for AES" -+ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER -+ default 512 -+ help -+ This sets the default maximum request size to perform AES requests -+ using software instead of the crypto engine. It can be changed by -+ setting the aes_sw_max_len parameter. -+ -+ Small blocks are processed faster in software than hardware. -+ Considering the 256-bit ciphers, software is 2-3 times faster than -+ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes. -+ With 128-bit keys, the break-even point would be around 1024-bytes. -+ -+ The default is set a little lower, to 512 bytes, to balance the -+ cost in CPU usage. The minimum recommended setting is 16-bytes -+ (1 AES block), since AES-GCM will fail if you set it lower. -+ Setting this to zero will send all requests to the hardware. -+ -+ Note that 192-bit keys are not supported by the hardware and are -+ always processed by the software fallback, and all DES requests -+ are done by the hardware. -+ - config CRYPTO_DEV_QCOM_RNG - tristate "Qualcomm Random Number Generator Driver" - depends on ARCH_QCOM || COMPILE_TEST ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -5,6 +5,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -12,6 +13,13 @@ - - #include "cipher.h" - -+static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN; -+module_param(aes_sw_max_len, uint, 0644); -+MODULE_PARM_DESC(aes_sw_max_len, -+ "Only use hardware for AES requests larger than this " -+ "[0=always use hardware; anything <16 breaks AES-GCM; default=" -+ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]"); -+ - static LIST_HEAD(skcipher_algs); - - static void qce_skcipher_done(void *data) -@@ -166,15 +174,10 @@ static int qce_skcipher_setkey(struct cr - switch (IS_XTS(flags) ? keylen >> 1 : keylen) { - case AES_KEYSIZE_128: - case AES_KEYSIZE_256: -+ memcpy(ctx->enc_key, key, keylen); - break; -- default: -- goto fallback; - } - -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --fallback: - ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); - if (!ret) - ctx->enc_keylen = keylen; -@@ -224,8 +227,9 @@ static int qce_skcipher_crypt(struct skc - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; - keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && -- keylen != AES_KEYSIZE_256) { -+ if (IS_AES(rctx->flags) && -+ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -+ req->cryptlen <= aes_sw_max_len)) { - SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_sync_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-5.4/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch b/target/linux/ipq40xx/patches-5.4/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch deleted file mode 100644 index 18beda6296..0000000000 --- a/target/linux/ipq40xx/patches-5.4/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 7f19380b2cfd412dcef2facefb3f6c62788864d7 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 7 Feb 2020 12:02:27 -0300 -Subject: [PATCH 11/11] crypto: qce - handle AES-XTS cases that qce fails - -QCE hangs when presented with an AES-XTS request whose length is larger -than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the -fallback cipher handle them. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/common.c | 2 -- - drivers/crypto/qce/common.h | 3 +++ - drivers/crypto/qce/skcipher.c | 9 +++++++-- - 3 files changed, 10 insertions(+), 4 deletions(-) - ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -15,8 +15,6 @@ - #include "regs-v5.h" - #include "sha.h" - --#define QCE_SECTOR_SIZE 512 -- - static inline u32 qce_read(struct qce_device *qce, u32 offset) - { - return readl(qce->base + offset); ---- a/drivers/crypto/qce/common.h -+++ b/drivers/crypto/qce/common.h -@@ -12,6 +12,9 @@ - #include - #include - -+/* xts du size */ -+#define QCE_SECTOR_SIZE 512 -+ - /* key size in bytes */ - #define QCE_SHA_HMAC_KEY_SIZE 64 - #define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256 ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -227,9 +227,14 @@ static int qce_skcipher_crypt(struct skc - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; - keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -+ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and -+ * is not a multiple of it; pass such requests to the fallback -+ */ - if (IS_AES(rctx->flags) && -- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -- req->cryptlen <= aes_sw_max_len)) { -+ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -+ req->cryptlen <= aes_sw_max_len) || -+ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE && -+ req->cryptlen % QCE_SECTOR_SIZE))) { - SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_sync_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-5.4/051-crypto-qce-allow-building-only-hashes-ciphers.patch b/target/linux/ipq40xx/patches-5.4/051-crypto-qce-allow-building-only-hashes-ciphers.patch deleted file mode 100644 index 5f350183d8..0000000000 --- a/target/linux/ipq40xx/patches-5.4/051-crypto-qce-allow-building-only-hashes-ciphers.patch +++ /dev/null @@ -1,419 +0,0 @@ -From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:18 -0300 -Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers - -Allow the user to choose whether to build support for all algorithms -(default), hashes-only, or skciphers-only. - -The QCE engine does not appear to scale as well as the CPU to handle -multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the -QCE handles only 2 requests in parallel. - -Ipsec throughput seems to improve when disabling either family of -algorithms, sharing the load with the CPU. Enabling skciphers-only -appears to work best. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -616,6 +616,14 @@ config CRYPTO_DEV_QCE - tristate "Qualcomm crypto engine accelerator" - depends on ARCH_QCOM || COMPILE_TEST - depends on HAS_IOMEM -+ help -+ This driver supports Qualcomm crypto engine accelerator -+ hardware. To compile this driver as a module, choose M here. The -+ module will be called qcrypto. -+ -+config CRYPTO_DEV_QCE_SKCIPHER -+ bool -+ depends on CRYPTO_DEV_QCE - select CRYPTO_AES - select CRYPTO_LIB_DES - select CRYPTO_ECB -@@ -623,10 +631,57 @@ config CRYPTO_DEV_QCE - select CRYPTO_XTS - select CRYPTO_CTR - select CRYPTO_BLKCIPHER -+ -+config CRYPTO_DEV_QCE_SHA -+ bool -+ depends on CRYPTO_DEV_QCE -+ -+choice -+ prompt "Algorithms enabled for QCE acceleration" -+ default CRYPTO_DEV_QCE_ENABLE_ALL -+ depends on CRYPTO_DEV_QCE - help -- This driver supports Qualcomm crypto engine accelerator -- hardware. To compile this driver as a module, choose M here. The -- module will be called qcrypto. -+ This option allows to choose whether to build support for all algorihtms -+ (default), hashes-only, or skciphers-only. -+ -+ The QCE engine does not appear to scale as well as the CPU to handle -+ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the -+ QCE handles only 2 requests in parallel. -+ -+ Ipsec throughput seems to improve when disabling either family of -+ algorithms, sharing the load with the CPU. Enabling skciphers-only -+ appears to work best. -+ -+ config CRYPTO_DEV_QCE_ENABLE_ALL -+ bool "All supported algorithms" -+ select CRYPTO_DEV_QCE_SKCIPHER -+ select CRYPTO_DEV_QCE_SHA -+ help -+ Enable all supported algorithms: -+ - AES (CBC, CTR, ECB, XTS) -+ - 3DES (CBC, ECB) -+ - DES (CBC, ECB) -+ - SHA1, HMAC-SHA1 -+ - SHA256, HMAC-SHA256 -+ -+ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER -+ bool "Symmetric-key ciphers only" -+ select CRYPTO_DEV_QCE_SKCIPHER -+ help -+ Enable symmetric-key ciphers only: -+ - AES (CBC, CTR, ECB, XTS) -+ - 3DES (ECB, CBC) -+ - DES (ECB, CBC) -+ -+ config CRYPTO_DEV_QCE_ENABLE_SHA -+ bool "Hash/HMAC only" -+ select CRYPTO_DEV_QCE_SHA -+ help -+ Enable hashes/HMAC algorithms only: -+ - SHA1, HMAC-SHA1 -+ - SHA256, HMAC-SHA256 -+ -+endchoice - - config CRYPTO_DEV_QCE_SW_MAX_LEN - int "Default maximum request size to use software for AES" ---- a/drivers/crypto/qce/Makefile -+++ b/drivers/crypto/qce/Makefile -@@ -2,6 +2,7 @@ - obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o - qcrypto-objs := core.o \ - common.o \ -- dma.o \ -- sha.o \ -- skcipher.o -+ dma.o -+ -+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o -+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -43,52 +43,56 @@ qce_clear_array(struct qce_device *qce, - qce_write(qce, offset + i * sizeof(u32), 0); - } - --static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) -+static u32 qce_config_reg(struct qce_device *qce, int little) - { -- u32 cfg = 0; -+ u32 beats = (qce->burst_size >> 3) - 1; -+ u32 pipe_pair = qce->pipe_pair_id; -+ u32 config; - -- if (IS_AES(flags)) { -- if (aes_key_size == AES_KEYSIZE_128) -- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; -- else if (aes_key_size == AES_KEYSIZE_256) -- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; -- } -+ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; -+ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | -+ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); -+ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; -+ config &= ~HIGH_SPD_EN_N_SHIFT; - -- if (IS_AES(flags)) -- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; -- else if (IS_DES(flags) || IS_3DES(flags)) -- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; -+ if (little) -+ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); - -- if (IS_DES(flags)) -- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; -+ return config; -+} - -- if (IS_3DES(flags)) -- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; -+void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) -+{ -+ __be32 *d = dst; -+ const u8 *s = src; -+ unsigned int n; - -- switch (flags & QCE_MODE_MASK) { -- case QCE_MODE_ECB: -- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CBC: -- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CTR: -- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_XTS: -- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CCM: -- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; -- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; -- break; -- default: -- return ~0; -+ n = len / sizeof(u32); -+ for (; n > 0; n--) { -+ *d = cpu_to_be32p((const __u32 *) s); -+ s += sizeof(__u32); -+ d++; - } -+} - -- return cfg; -+static void qce_setup_config(struct qce_device *qce) -+{ -+ u32 config; -+ -+ /* get big endianness */ -+ config = qce_config_reg(qce, 0); -+ -+ /* clear status */ -+ qce_write(qce, REG_STATUS, 0); -+ qce_write(qce, REG_CONFIG, config); -+} -+ -+static inline void qce_crypto_go(struct qce_device *qce) -+{ -+ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); - } - -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - static u32 qce_auth_cfg(unsigned long flags, u32 key_size) - { - u32 cfg = 0; -@@ -135,88 +139,6 @@ static u32 qce_auth_cfg(unsigned long fl - return cfg; - } - --static u32 qce_config_reg(struct qce_device *qce, int little) --{ -- u32 beats = (qce->burst_size >> 3) - 1; -- u32 pipe_pair = qce->pipe_pair_id; -- u32 config; -- -- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; -- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | -- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); -- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; -- config &= ~HIGH_SPD_EN_N_SHIFT; -- -- if (little) -- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); -- -- return config; --} -- --void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) --{ -- __be32 *d = dst; -- const u8 *s = src; -- unsigned int n; -- -- n = len / sizeof(u32); -- for (; n > 0; n--) { -- *d = cpu_to_be32p((const __u32 *) s); -- s += sizeof(__u32); -- d++; -- } --} -- --static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) --{ -- u8 swap[QCE_AES_IV_LENGTH]; -- u32 i, j; -- -- if (ivsize > QCE_AES_IV_LENGTH) -- return; -- -- memset(swap, 0, QCE_AES_IV_LENGTH); -- -- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; -- i < QCE_AES_IV_LENGTH; i++, j--) -- swap[i] = src[j]; -- -- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); --} -- --static void qce_xtskey(struct qce_device *qce, const u8 *enckey, -- unsigned int enckeylen, unsigned int cryptlen) --{ -- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; -- unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); -- unsigned int xtsdusize; -- -- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, -- enckeylen / 2); -- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); -- -- /* xts du size 512B */ -- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); -- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); --} -- --static void qce_setup_config(struct qce_device *qce) --{ -- u32 config; -- -- /* get big endianness */ -- config = qce_config_reg(qce, 0); -- -- /* clear status */ -- qce_write(qce, REG_STATUS, 0); -- qce_write(qce, REG_CONFIG, config); --} -- --static inline void qce_crypto_go(struct qce_device *qce) --{ -- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); --} -- - static int qce_setup_regs_ahash(struct crypto_async_request *async_req, - u32 totallen, u32 offset) - { -@@ -301,6 +223,87 @@ go_proc: - - return 0; - } -+#endif -+ -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER -+static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) -+{ -+ u32 cfg = 0; -+ -+ if (IS_AES(flags)) { -+ if (aes_key_size == AES_KEYSIZE_128) -+ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; -+ else if (aes_key_size == AES_KEYSIZE_256) -+ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; -+ } -+ -+ if (IS_AES(flags)) -+ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; -+ else if (IS_DES(flags) || IS_3DES(flags)) -+ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; -+ -+ if (IS_DES(flags)) -+ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; -+ -+ if (IS_3DES(flags)) -+ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; -+ -+ switch (flags & QCE_MODE_MASK) { -+ case QCE_MODE_ECB: -+ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CBC: -+ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CTR: -+ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_XTS: -+ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CCM: -+ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; -+ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; -+ break; -+ default: -+ return ~0; -+ } -+ -+ return cfg; -+} -+ -+static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) -+{ -+ u8 swap[QCE_AES_IV_LENGTH]; -+ u32 i, j; -+ -+ if (ivsize > QCE_AES_IV_LENGTH) -+ return; -+ -+ memset(swap, 0, QCE_AES_IV_LENGTH); -+ -+ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; -+ i < QCE_AES_IV_LENGTH; i++, j--) -+ swap[i] = src[j]; -+ -+ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); -+} -+ -+static void qce_xtskey(struct qce_device *qce, const u8 *enckey, -+ unsigned int enckeylen, unsigned int cryptlen) -+{ -+ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; -+ unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); -+ unsigned int xtsdusize; -+ -+ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, -+ enckeylen / 2); -+ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); -+ -+ /* xts du size 512B */ -+ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); -+ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); -+} - - static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, - u32 totallen, u32 offset) -@@ -382,15 +385,20 @@ static int qce_setup_regs_skcipher(struc - - return 0; - } -+#endif - - int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen, - u32 offset) - { - switch (type) { -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER - case CRYPTO_ALG_TYPE_SKCIPHER: - return qce_setup_regs_skcipher(async_req, totallen, offset); -+#endif -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - case CRYPTO_ALG_TYPE_AHASH: - return qce_setup_regs_ahash(async_req, totallen, offset); -+#endif - default: - return -EINVAL; - } ---- a/drivers/crypto/qce/core.c -+++ b/drivers/crypto/qce/core.c -@@ -22,8 +22,12 @@ - #define QCE_QUEUE_LENGTH 1 - - static const struct qce_algo_ops *qce_ops[] = { -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER - &skcipher_ops, -+#endif -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - &ahash_ops, -+#endif - }; - - static void qce_unregister_algs(struct qce_device *qce) diff --git a/target/linux/ipq40xx/patches-5.4/071-02-ipq40xx-Fix-booting-secondary-cores.patch b/target/linux/ipq40xx/patches-5.4/071-02-ipq40xx-Fix-booting-secondary-cores.patch deleted file mode 100644 index 631a1307dd..0000000000 --- a/target/linux/ipq40xx/patches-5.4/071-02-ipq40xx-Fix-booting-secondary-cores.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 8a4540321e8bcf7a5b485c332a2e78f3501c78ed Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 29 Nov 2018 22:29:36 +0100 -Subject: [PATCH] ipq40xx: Fix booting secondary cores - -Add the second part of old 071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch -We dont modify the patch itself as its upstream and this change is not. - -Originally added by Mantas Pucka Mantas Pucka - -Signed-off-by: Robert Marko ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -102,6 +102,7 @@ - L2: l2-cache { - compatible = "cache"; - cache-level = <2>; -+ qcom,saw = <&saw_l2>; - }; - }; - -@@ -341,6 +342,12 @@ - regulator; - }; - -+ saw_l2: regulator@b012000 { -+ compatible = "qcom,saw2"; -+ reg = <0xb012000 0x1000>; -+ regulator; -+ }; -+ - blsp1_uart1: serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; diff --git a/target/linux/ipq40xx/patches-5.4/074-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq40xx/patches-5.4/074-ARM-qcom-Add-IPQ4019-SoC-support.patch deleted file mode 100644 index 16ac94fd37..0000000000 --- a/target/linux/ipq40xx/patches-5.4/074-ARM-qcom-Add-IPQ4019-SoC-support.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 22 Jul 2018 12:07:57 +0200 -Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support - -Add support for the Qualcomm Atheros IPQ4019 SoC. - -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin ---- - arch/arm/Makefile | 1 + - arch/arm/mach-qcom/Kconfig | 5 +++++ - 2 files changed, 6 insertions(+) - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -156,6 +156,7 @@ textofs-$(CONFIG_ARCH_MSM8X60) := 0x0020 - textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 - textofs-$(CONFIG_ARCH_MESON) := 0x00208000 - textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 -+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 - - # Machine directory name. This list is sorted alphanumerically - # by CONFIG_* macro name. ---- a/arch/arm/mach-qcom/Kconfig -+++ b/arch/arm/mach-qcom/Kconfig -@@ -28,4 +28,9 @@ config ARCH_MDM9615 - bool "Enable support for MDM9615" - select CLKSRC_QCOM - -+config ARCH_IPQ40XX -+ bool "Enable support for IPQ40XX" -+ select CLKSRC_QCOM -+ select HAVE_ARM_ARCH_TIMER -+ - endif diff --git a/target/linux/ipq40xx/patches-5.4/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch b/target/linux/ipq40xx/patches-5.4/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch deleted file mode 100644 index e7407bcbab..0000000000 --- a/target/linux/ipq40xx/patches-5.4/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 24 Jul 2018 15:09:36 +0200 -Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document - -This patch adds the binding documentation for the HS/SS USB PHY found -inside Qualcom Dakota SoCs. - -Signed-off-by: John Crispin ---- - .../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt -@@ -0,0 +1,21 @@ -+Qualcom Dakota HS/SS USB PHY -+ -+Required properties: -+ - compatible: "qcom,usb-ss-ipq4019-phy", -+ "qcom,usb-hs-ipq4019-phy" -+ - reg: offset and length of the registers -+ - #phy-cells: should be 0 -+ - resets: the reset controllers as listed below -+ - reset-names: the names of the reset controllers -+ "por_rst" - the POR reset line for SS and HS phys -+ "srif_rst" - the SRIF reset line for HS phys -+Example: -+ -+hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, -+ <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+}; diff --git a/target/linux/ipq40xx/patches-5.4/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch b/target/linux/ipq40xx/patches-5.4/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch deleted file mode 100644 index 6ded0e9bad..0000000000 --- a/target/linux/ipq40xx/patches-5.4/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch +++ /dev/null @@ -1,234 +0,0 @@ -From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 24 Jul 2018 14:45:49 +0200 -Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019 - -Add a driver to setup the USB phy on Qualcom Dakota SoCs. -The driver sets up HS and SS phys. In case of HS some magic values need to -be written to magic offsets. These were taken from the SDK driver. - -Signed-off-by: John Crispin ---- - drivers/phy/qualcomm/Kconfig | 7 ++ - drivers/phy/qualcomm/Makefile | 1 + - drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++ - 3 files changed, 196 insertions(+) - create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c - ---- a/drivers/phy/qualcomm/Kconfig -+++ b/drivers/phy/qualcomm/Kconfig -@@ -18,6 +18,13 @@ config PHY_QCOM_APQ8064_SATA - depends on OF - select GENERIC_PHY - -+config PHY_QCOM_IPQ4019_USB -+ tristate "Qualcomm IPQ4019 USB PHY module" -+ depends on OF && ARCH_QCOM -+ select GENERIC_PHY -+ help -+ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets. -+ - config PHY_QCOM_IPQ806X_SATA - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" - depends on ARCH_QCOM ---- /dev/null -+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c -@@ -0,0 +1,188 @@ -+/* -+ * Copyright (C) 2018 John Crispin -+ * -+ * Based on code from -+ * Allwinner Technology Co., Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * Magic registers copied from the SDK driver code -+ */ -+#define PHY_CTRL0_ADDR 0x000 -+#define PHY_CTRL1_ADDR 0x004 -+#define PHY_CTRL2_ADDR 0x008 -+#define PHY_CTRL3_ADDR 0x00C -+#define PHY_CTRL4_ADDR 0x010 -+#define PHY_MISC_ADDR 0x024 -+#define PHY_IPG_ADDR 0x030 -+ -+#define PHY_CTRL0_VAL 0xA4600015 -+#define PHY_CTRL1_VAL 0x09500000 -+#define PHY_CTRL2_VAL 0x00058180 -+#define PHY_CTRL3_VAL 0x6DB6DCD6 -+#define PHY_CTRL4_VAL 0x836DB6DB -+#define PHY_MISC_VAL 0x3803FB0C -+#define PHY_IPG_VAL 0x47323232 -+ -+struct ipq4019_usb_phy { -+ struct device *dev; -+ struct phy *phy; -+ void __iomem *base; -+ struct reset_control *por_rst; -+ struct reset_control *srif_rst; -+}; -+ -+static int ipq4019_ss_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_ss_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_ss_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_ss_phy_ops = { -+ .power_on = ipq4019_ss_phy_power_on, -+ .power_off = ipq4019_ss_phy_power_off, -+}; -+ -+static int ipq4019_hs_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ reset_control_assert(phy->srif_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_hs_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_hs_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->srif_rst); -+ msleep(10); -+ -+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR); -+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR); -+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR); -+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR); -+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR); -+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR); -+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR); -+ msleep(10); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_hs_phy_ops = { -+ .power_on = ipq4019_hs_phy_power_on, -+ .power_off = ipq4019_hs_phy_power_off, -+}; -+ -+static const struct of_device_id ipq4019_usb_phy_of_match[] = { -+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops}, -+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops}, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match); -+ -+static int ipq4019_usb_phy_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ struct phy_provider *phy_provider; -+ struct ipq4019_usb_phy *phy; -+ const struct of_device_id *match; -+ -+ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev); -+ if (!match) -+ return -ENODEV; -+ -+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); -+ if (!phy) -+ return -ENOMEM; -+ -+ phy->dev = &pdev->dev; -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ phy->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(phy->base)) { -+ dev_err(dev, "failed to remap register memory\n"); -+ return PTR_ERR(phy->base); -+ } -+ -+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); -+ if (IS_ERR(phy->por_rst)) { -+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER) -+ dev_err(dev, "POR reset is missing\n"); -+ return PTR_ERR(phy->por_rst); -+ } -+ -+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst"); -+ if (IS_ERR(phy->srif_rst)) -+ return PTR_ERR(phy->srif_rst); -+ -+ phy->phy = devm_phy_create(dev, NULL, match->data); -+ if (IS_ERR(phy->phy)) { -+ dev_err(dev, "failed to create PHY\n"); -+ return PTR_ERR(phy->phy); -+ } -+ phy_set_drvdata(phy->phy, phy); -+ -+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); -+ -+ return PTR_ERR_OR_ZERO(phy_provider); -+} -+ -+static struct platform_driver ipq4019_usb_phy_driver = { -+ .probe = ipq4019_usb_phy_probe, -+ .driver = { -+ .of_match_table = ipq4019_usb_phy_of_match, -+ .name = "ipq4019-usb-phy", -+ } -+}; -+module_platform_driver(ipq4019_usb_phy_driver); -+ -+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); -+MODULE_AUTHOR("John Crispin "); -+MODULE_LICENSE("GPL v2"); ---- a/drivers/phy/qualcomm/Makefile -+++ b/drivers/phy/qualcomm/Makefile -@@ -1,6 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o - obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o -+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o - obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o - obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o - obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o diff --git a/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch deleted file mode 100644 index 5efc08bcca..0000000000 --- a/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ /dev/null @@ -1,123 +0,0 @@ -From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 24 Jul 2018 14:47:55 +0200 -Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes - -This patch makes USB work on the Dakota EVB. - -Signed-off-by: John Crispin ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++ - arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++ - 2 files changed, 94 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -109,5 +109,25 @@ - wifi@a800000 { - status = "ok"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ status = "okay"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ status = "okay"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ status = "okay"; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ status = "okay"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -563,5 +563,79 @@ - "legacy"; - status = "disabled"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ compatible = "qcom,usb-ss-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0x9a000 0x800>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_UNIPHY_PHY_ARES>; -+ reset-names = "por_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa6000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3@8af8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x8af8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB3_MASTER_CLK>, -+ <&gcc GCC_USB3_SLEEP_CLK>, -+ <&gcc GCC_USB3_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x8a00000 0xf8000>; -+ interrupts = ; -+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ }; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb2@60f8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x60f8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB2_MASTER_CLK>, -+ <&gcc GCC_USB2_SLEEP_CLK>, -+ <&gcc GCC_USB2_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@6000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x6000000 0xf8000>; -+ interrupts = ; -+ phys = <&usb2_hs_phy>; -+ phy-names = "usb2-phy"; -+ dr_mode = "host"; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq40xx/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch deleted file mode 100644 index 972bdb7497..0000000000 --- a/target/linux/ipq40xx/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch +++ /dev/null @@ -1,70 +0,0 @@ -From patchwork Mon May 21 20:57:38 2018 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property -X-Patchwork-Submitter: Christian Lamparter -X-Patchwork-Id: 917856 -Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com> -To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, - linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org -Cc: Bjorn Andersson , - Linus Walleij , - Stephen Boyd , David Brown , - Rob Herring , Mark Rutland , - Andy Gross , - Sven Eckelmann -Date: Mon, 21 May 2018 22:57:38 +0200 -From: Christian Lamparter -List-Id: - -This patch adds the gpio-ranges property to almost all of -the Qualcomm ARM platforms that utilize the pinctrl-msm -framework. - -The gpio-ranges property is part of the gpiolib subsystem. -As a result, the binding text is available in section -"2.1 gpio- and pin-controller interaction" of -Documentation/devicetree/bindings/gpio/gpio.txt - -For more information please see the patch titled: -"pinctrl: msm: fix gpio-hog related boot issues" from -this series. - -Reported-by: Sven Eckelmann -Tested-by: Sven Eckelmann [ipq4019] -Reviewed-by: Bjorn Andersson -Signed-off-by: Christian Lamparter -Reviewed-by: Linus Walleij ---- -To help with git bisect, the DT update patch has been intentionally -placed after the "pinctrl: msm: fix gpio-hog related boot issues". -Otherwise - if the order was reveresed - and bisect decides to split -between these two patches, the gpiochip_add_pin_ranges() function -will be executed twice with the same parameters for the same pinctrl. ---- - arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + - arch/arm/boot/dts/qcom-apq8084.dtsi | 1 + - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 + - arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8660.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8960.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++- - arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + - arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 + - arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 + - arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 + - 13 files changed, 14 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -201,6 +201,7 @@ - compatible = "qcom,ipq4019-pinctrl"; - reg = <0x01000000 0x300000>; - gpio-controller; -+ gpio-ranges = <&tlmm 0 0 100>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; diff --git a/target/linux/ipq40xx/patches-5.4/081-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-5.4/081-clk-fix-apss-cpu-overclocking.patch deleted file mode 100644 index 25a2020bd2..0000000000 --- a/target/linux/ipq40xx/patches-5.4/081-clk-fix-apss-cpu-overclocking.patch +++ /dev/null @@ -1,115 +0,0 @@ -From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 11 Mar 2018 14:41:31 +0100 -Subject: [PATCH 2/2] clk: fix apss cpu overclocking - -There's an interaction issue between the clk changes:" -clk: qcom: ipq4019: Add the apss cpu pll divider clock node -clk: qcom: ipq4019: remove fixed clocks and add pll clocks -" and the cpufreq-dt. - -cpufreq-dt is now spamming the kernel-log with the following: - -[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP -for freq 761142857 (-34) - -This only happens on certain devices like the Compex WPJ428 -and AVM FritzBox!4040. However, other devices like the Asus -RT-AC58U and Meraki MR33 work just fine. - -The issue stem from the fact that all higher CPU-Clocks -are achieved by switching the clock-parent to the P_DDRPLLAPSS -(ddrpllapss). Which is set by Qualcomm's proprietary bootcode -as part of the DDR calibration. - -For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked -at round 533 MHz (ddrpllsdcc = 190285714 Hz). - -whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is -clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). - -This patch attempts to fix the issue by modifying -clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() -to use a new qcom_find_freq_close() function, which returns the closest -matching frequency, instead of the next higher. This way, the SoC in -the FB4040 (with its max clock speed of 710.4 MHz) will no longer -try to overclock to 761 MHz. - -Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin ---- - drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- - 1 file changed, 31 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe - .reg = 0x2f020, - }; - -+ -+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, -+ unsigned long rate) -+{ -+ const struct freq_tbl *last = NULL; -+ -+ for ( ; f->freq; f++) { -+ if (rate == f->freq) -+ return f; -+ -+ if (f->freq > rate) { -+ if (!last || -+ (f->freq - rate) < (rate - last->freq)) -+ return f; -+ else -+ return last; -+ } -+ last = f; -+ } -+ -+ return last; -+} -+ - /* - * Round rate function for APSS CPU PLL Clock divider. - * It looks up the frequency table and returns the next higher frequency -@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc - struct clk_hw *p_hw; - const struct freq_tbl *f; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1278,7 +1301,7 @@ static int clk_cpu_div_set_rate(struct c - u32 mask; - int ret; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1305,6 +1328,7 @@ static unsigned long - clk_cpu_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) - { -+ const struct freq_tbl *f; - struct clk_fepll *pll = to_clk_fepll(hw); - u32 cdiv, pre_div; - u64 rate; -@@ -1325,7 +1349,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h - rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; - do_div(rate, pre_div); - -- return rate; -+ f = qcom_find_freq_close(pll->freq_tbl, rate); -+ if (!f) -+ return rate; -+ -+ return f->freq; - }; - - static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-5.4/086-ipq40xx-fix-high-resolution-timer.patch b/target/linux/ipq40xx/patches-5.4/086-ipq40xx-fix-high-resolution-timer.patch deleted file mode 100644 index 3bfd0d99e0..0000000000 --- a/target/linux/ipq40xx/patches-5.4/086-ipq40xx-fix-high-resolution-timer.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 09f145f417a5d64d6b8d4476699dfb0eccc6c784 Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Tue, 7 May 2019 10:14:05 +0300 -Subject: [PATCH] ipq40xx: fix high resolution timer - -Cherry-picked from CAF QSDK repo. -Original commit message: -The kernel is failing in switching the timer for high resolution -mode and clock source operates in 10ms resolution. The always-on -property needs to be given for timer device tree node to make -clock source working in 1ns resolution. - -Change-Id: I7c00b3c74d97c2a30ac9f05e18b511a0550fd459 -Signed-off-by: Abhishek Sahu -Signed-off-by: Pavel Kubelun ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -166,6 +166,7 @@ - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <48000000>; -+ always-on; - }; - - soc { diff --git a/target/linux/ipq40xx/patches-5.4/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch b/target/linux/ipq40xx/patches-5.4/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch deleted file mode 100644 index aaf8c807ed..0000000000 --- a/target/linux/ipq40xx/patches-5.4/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch +++ /dev/null @@ -1,153 +0,0 @@ -From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 22 Jan 2020 12:44:14 +0100 -Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17 - 00:00:00 2001 From: Robert Marko Date: Sun, 12 Jan - 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO - driver - -This introduces the IPQ4019 VQMMC LDO driver needed for -the SD/EMMC driver I/O level operation. -This will enable introducing SD/EMMC support for the built-in controller. - -Signed-off-by: Mantas Pucka -Signed-off-by: Robert Marko -Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr -Signed-off-by: Mark Brown ---- - drivers/regulator/Kconfig | 7 ++ - drivers/regulator/Makefile | 1 + - drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++ - 3 files changed, 109 insertions(+) - create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c - ---- a/drivers/regulator/Kconfig -+++ b/drivers/regulator/Kconfig -@@ -1077,6 +1077,13 @@ config REGULATOR_VEXPRESS - This driver provides support for voltage regulators available - on the ARM Ltd's Versatile Express platform. - -+config REGULATOR_VQMMC_IPQ4019 -+ tristate "IPQ4019 VQMMC SD LDO regulator support" -+ depends on ARCH_QCOM -+ help -+ This driver provides support for the VQMMC LDO I/0 -+ voltage regulator of the IPQ4019 SD/EMMC controller. -+ - config REGULATOR_WM831X - tristate "Wolfson Microelectronics WM831x PMIC regulators" - depends on MFD_WM831X ---- a/drivers/regulator/Makefile -+++ b/drivers/regulator/Makefile -@@ -132,6 +132,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r - obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o - obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o - obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o -+obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o ---- /dev/null -+++ b/drivers/regulator/vqmmc-ipq4019-regulator.c -@@ -0,0 +1,101 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+// -+// Copyright (c) 2019 Mantas Pucka -+// Copyright (c) 2019 Robert Marko -+// -+// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static const unsigned int ipq4019_vmmc_voltages[] = { -+ 1500000, 1800000, 2500000, 3000000, -+}; -+ -+static const struct regulator_ops ipq4019_regulator_voltage_ops = { -+ .list_voltage = regulator_list_voltage_table, -+ .map_voltage = regulator_map_voltage_ascend, -+ .get_voltage_sel = regulator_get_voltage_sel_regmap, -+ .set_voltage_sel = regulator_set_voltage_sel_regmap, -+}; -+ -+static const struct regulator_desc vmmc_regulator = { -+ .name = "vmmcq", -+ .ops = &ipq4019_regulator_voltage_ops, -+ .type = REGULATOR_VOLTAGE, -+ .owner = THIS_MODULE, -+ .volt_table = ipq4019_vmmc_voltages, -+ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages), -+ .vsel_reg = 0, -+ .vsel_mask = 0x3, -+}; -+ -+static const struct regmap_config ipq4019_vmmcq_regmap_config = { -+ .reg_bits = 32, -+ .reg_stride = 4, -+ .val_bits = 32, -+}; -+ -+static int ipq4019_regulator_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct regulator_init_data *init_data; -+ struct regulator_config cfg = {}; -+ struct regulator_dev *rdev; -+ struct resource *res; -+ struct regmap *rmap; -+ void __iomem *base; -+ -+ init_data = of_get_regulator_init_data(dev, dev->of_node, -+ &vmmc_regulator); -+ if (!init_data) -+ return -EINVAL; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config); -+ if (IS_ERR(rmap)) -+ return PTR_ERR(rmap); -+ -+ cfg.dev = dev; -+ cfg.init_data = init_data; -+ cfg.of_node = dev->of_node; -+ cfg.regmap = rmap; -+ -+ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg); -+ if (IS_ERR(rdev)) { -+ dev_err(dev, "Failed to register regulator: %ld\n", -+ PTR_ERR(rdev)); -+ return PTR_ERR(rdev); -+ } -+ platform_set_drvdata(pdev, rdev); -+ -+ return 0; -+} -+ -+static const struct of_device_id regulator_ipq4019_of_match[] = { -+ { .compatible = "qcom,vqmmc-ipq4019-regulator", }, -+ {}, -+}; -+ -+static struct platform_driver ipq4019_regulator_driver = { -+ .probe = ipq4019_regulator_probe, -+ .driver = { -+ .name = "vqmmc-ipq4019-regulator", -+ .of_match_table = of_match_ptr(regulator_ipq4019_of_match), -+ }, -+}; -+module_platform_driver(ipq4019_regulator_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Mantas Pucka "); -+MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator"); diff --git a/target/linux/ipq40xx/patches-5.4/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch b/target/linux/ipq40xx/patches-5.4/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch deleted file mode 100644 index b3e0a20b32..0000000000 --- a/target/linux/ipq40xx/patches-5.4/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 15 Aug 2019 19:28:23 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node - -IPQ4019 has a built in SD/eMMC controller which is supported by the -SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding. -So lets add the appropriate node for it. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -209,6 +209,18 @@ - interrupts = ; - }; - -+ sdhci: sdhci@7824900 { -+ compatible = "qcom,sdhci-msm-v4"; -+ reg = <0x7824900 0x11c>, <0x7824000 0x800>; -+ interrupts = , ; -+ interrupt-names = "hc_irq", "pwr_irq"; -+ bus-width = <8>; -+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, -+ <&gcc GCC_DCD_XO_CLK>; -+ clock-names = "core", "iface", "xo"; -+ status = "disabled"; -+ }; -+ - blsp_dma: dma@7884000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07884000 0x23000>; diff --git a/target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch b/target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch deleted file mode 100644 index 5cd4ccc30f..0000000000 --- a/target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 5b08c1d567ee8e6af94696b3e549997cbdb2bb80 Mon Sep 17 00:00:00 2001 -From: Jaiganesh Narayanan -Date: Thu, 1 Sep 2016 10:40:38 +0530 -Subject: [PATCH] pinctrl: qcom: ipq4019: add open drain support - -Signed-off-by: Jaiganesh Narayanan -[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based - WiFi APs. ] -Signed-off-by: Brian Norris ---- -https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/ - - drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1 + - drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++++ - drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++ - 3 files changed, 16 insertions(+) - ---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c -+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c -@@ -254,6 +254,7 @@ DECLARE_QCA_GPIO_PINS(99); - .mux_bit = 2, \ - .pull_bit = 0, \ - .drv_bit = 6, \ -+ .od_bit = 12, \ - .oe_bit = 9, \ - .in_bit = 0, \ - .out_bit = 1, \ ---- a/drivers/pinctrl/qcom/pinctrl-msm.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm.c -@@ -225,6 +225,10 @@ static int msm_config_reg(struct msm_pin - *bit = g->pull_bit; - *mask = 3; - break; -+ case PIN_CONFIG_DRIVE_OPEN_DRAIN: -+ *bit = g->od_bit; -+ *mask = 1; -+ break; - case PIN_CONFIG_DRIVE_STRENGTH: - *bit = g->drv_bit; - *mask = 7; -@@ -302,6 +306,12 @@ static int msm_config_group_get(struct p - if (!arg) - return -EINVAL; - break; -+ case PIN_CONFIG_DRIVE_OPEN_DRAIN: -+ /* Pin is not open-drain */ -+ if (!arg) -+ return -EINVAL; -+ arg = 1; -+ break; - case PIN_CONFIG_DRIVE_STRENGTH: - arg = msm_regval_to_drive(arg); - break; -@@ -374,6 +384,9 @@ static int msm_config_group_set(struct p - else - arg = MSM_PULL_UP; - break; -+ case PIN_CONFIG_DRIVE_OPEN_DRAIN: -+ arg = 1; -+ break; - case PIN_CONFIG_DRIVE_STRENGTH: - /* Check for invalid values */ - if (arg > 16 || arg < 2 || (arg % 2) != 0) ---- a/drivers/pinctrl/qcom/pinctrl-msm.h -+++ b/drivers/pinctrl/qcom/pinctrl-msm.h -@@ -38,6 +38,7 @@ struct msm_function { - * @mux_bit: Offset in @ctl_reg for the pinmux function selection. - * @pull_bit: Offset in @ctl_reg for the bias configuration. - * @drv_bit: Offset in @ctl_reg for the drive strength configuration. -+ * @od_bit: Offset in @ctl_reg for controlling open drain. - * @oe_bit: Offset in @ctl_reg for controlling output enable. - * @in_bit: Offset in @io_reg for the input bit value. - * @out_bit: Offset in @io_reg for the output bit value. -@@ -75,6 +76,7 @@ struct msm_pingroup { - unsigned pull_bit:5; - unsigned drv_bit:5; - -+ unsigned od_bit:5; - unsigned oe_bit:5; - unsigned in_bit:5; - unsigned out_bit:5; diff --git a/target/linux/ipq40xx/patches-5.4/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-5.4/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch deleted file mode 100644 index 14affc28c1..0000000000 --- a/target/linux/ipq40xx/patches-5.4/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 22 Jan 2020 12:56:35 +0100 -Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node - -Since we now have driver for the SDHCI VQMMC LDO needed -for I/0 voltage levels lets introduce the necessary node for it. - -Signed-off-by: Robert Marko ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -209,6 +209,16 @@ - interrupts = ; - }; - -+ vqmmc: regulator@1948000 { -+ compatible = "qcom,vqmmc-ipq4019-regulator"; -+ reg = <0x01948000 0x4>; -+ regulator-name = "vqmmc"; -+ regulator-min-microvolt = <1500000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-always-on; -+ status = "disabled"; -+ }; -+ - sdhci: sdhci@7824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x11c>, <0x7824000 0x800>; diff --git a/target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch new file mode 100644 index 0000000000..14affc28c1 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch @@ -0,0 +1,32 @@ +From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 22 Jan 2020 12:56:35 +0100 +Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node + +Since we now have driver for the SDHCI VQMMC LDO needed +for I/0 voltage levels lets introduce the necessary node for it. + +Signed-off-by: Robert Marko +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -209,6 +209,16 @@ + interrupts = ; + }; + ++ vqmmc: regulator@1948000 { ++ compatible = "qcom,vqmmc-ipq4019-regulator"; ++ reg = <0x01948000 0x4>; ++ regulator-name = "vqmmc"; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-always-on; ++ status = "disabled"; ++ }; ++ + sdhci: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x11c>, <0x7824000 0x800>; diff --git a/target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch new file mode 100644 index 0000000000..b033a1baee --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch @@ -0,0 +1,97 @@ +From 193856b5fe11c50a0b6ff22457dd674c1a45fec6 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 9 Sep 2020 18:31:03 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes + +Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI. + +Signed-off-by: John Crispin +Signed-off-by: Robert Marko +Cc: Luka Perkov +Reviewed-by: Vinod Koul +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++ + 1 file changed, 74 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -615,5 +615,79 @@ + reg = <4>; + }; + }; ++ ++ usb3_ss_phy: ssphy@9a000 { ++ compatible = "qcom,usb-ss-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0x9a000 0x800>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB3_UNIPHY_PHY_ARES>; ++ reset-names = "por_rst"; ++ status = "disabled"; ++ }; ++ ++ usb3_hs_phy: hsphy@a6000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0xa6000 0x40>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++ status = "disabled"; ++ }; ++ ++ usb3: usb3@8af8800 { ++ compatible = "qcom,dwc3"; ++ reg = <0x8af8800 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc GCC_USB3_MASTER_CLK>, ++ <&gcc GCC_USB3_SLEEP_CLK>, ++ <&gcc GCC_USB3_MOCK_UTMI_CLK>; ++ clock-names = "master", "sleep", "mock_utmi"; ++ ranges; ++ status = "disabled"; ++ ++ dwc3@8a00000 { ++ compatible = "snps,dwc3"; ++ reg = <0x8a00000 0xf8000>; ++ interrupts = ; ++ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ dr_mode = "host"; ++ }; ++ }; ++ ++ usb2_hs_phy: hsphy@a8000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0xa8000 0x40>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++ status = "disabled"; ++ }; ++ ++ usb2: usb2@60f8800 { ++ compatible = "qcom,dwc3"; ++ reg = <0x60f8800 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc GCC_USB2_MASTER_CLK>, ++ <&gcc GCC_USB2_SLEEP_CLK>, ++ <&gcc GCC_USB2_MOCK_UTMI_CLK>; ++ clock-names = "master", "sleep", "mock_utmi"; ++ ranges; ++ status = "disabled"; ++ ++ dwc3@6000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x6000000 0xf8000>; ++ interrupts = ; ++ phys = <&usb2_hs_phy>; ++ phy-names = "usb2-phy"; ++ dr_mode = "host"; ++ }; ++ }; + }; + }; diff --git a/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch b/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch new file mode 100644 index 0000000000..0e215ee7cf --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch @@ -0,0 +1,42 @@ +From caa3ee6b094ee18021943504c938919fcac325ec Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 9 Sep 2020 20:40:33 +0200 +Subject: [PATCH] arm: dts: qcom: ipq4019: add more labels + +Lets add labels to more commonly used nodes for easier modification in board DTS files. + +Signed-off-by: Robert Marko +Cc: Luka Perkov +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -190,7 +190,7 @@ + reg = <0x1800000 0x60000>; + }; + +- rng@22000 { ++ prng: rng@22000 { + compatible = "qcom,prng"; + reg = <0x22000 0x140>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; +@@ -310,7 +310,7 @@ + status = "disabled"; + }; + +- crypto@8e3a000 { ++ crypto: crypto@8e3a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x08e3a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, +@@ -396,7 +396,7 @@ + dma-names = "rx", "tx"; + }; + +- watchdog@b017000 { ++ watchdog: watchdog@b017000 { + compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; + reg = <0xb017000 0x40>; + clocks = <&sleep_clk>; diff --git a/target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch new file mode 100644 index 0000000000..25a2020bd2 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch @@ -0,0 +1,115 @@ +From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Sun, 11 Mar 2018 14:41:31 +0100 +Subject: [PATCH 2/2] clk: fix apss cpu overclocking + +There's an interaction issue between the clk changes:" +clk: qcom: ipq4019: Add the apss cpu pll divider clock node +clk: qcom: ipq4019: remove fixed clocks and add pll clocks +" and the cpufreq-dt. + +cpufreq-dt is now spamming the kernel-log with the following: + +[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP +for freq 761142857 (-34) + +This only happens on certain devices like the Compex WPJ428 +and AVM FritzBox!4040. However, other devices like the Asus +RT-AC58U and Meraki MR33 work just fine. + +The issue stem from the fact that all higher CPU-Clocks +are achieved by switching the clock-parent to the P_DDRPLLAPSS +(ddrpllapss). Which is set by Qualcomm's proprietary bootcode +as part of the DDR calibration. + +For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked +at round 533 MHz (ddrpllsdcc = 190285714 Hz). + +whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is +clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). + +This patch attempts to fix the issue by modifying +clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() +to use a new qcom_find_freq_close() function, which returns the closest +matching frequency, instead of the next higher. This way, the SoC in +the FB4040 (with its max clock speed of 710.4 MHz) will no longer +try to overclock to 761 MHz. + +Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") +Signed-off-by: Christian Lamparter +Signed-off-by: John Crispin +--- + drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- + 1 file changed, 31 insertions(+), 3 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq4019.c ++++ b/drivers/clk/qcom/gcc-ipq4019.c +@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe + .reg = 0x2f020, + }; + ++ ++const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, ++ unsigned long rate) ++{ ++ const struct freq_tbl *last = NULL; ++ ++ for ( ; f->freq; f++) { ++ if (rate == f->freq) ++ return f; ++ ++ if (f->freq > rate) { ++ if (!last || ++ (f->freq - rate) < (rate - last->freq)) ++ return f; ++ else ++ return last; ++ } ++ last = f; ++ } ++ ++ return last; ++} ++ + /* + * Round rate function for APSS CPU PLL Clock divider. + * It looks up the frequency table and returns the next higher frequency +@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc + struct clk_hw *p_hw; + const struct freq_tbl *f; + +- f = qcom_find_freq(pll->freq_tbl, rate); ++ f = qcom_find_freq_close(pll->freq_tbl, rate); + if (!f) + return -EINVAL; + +@@ -1278,7 +1301,7 @@ static int clk_cpu_div_set_rate(struct c + u32 mask; + int ret; + +- f = qcom_find_freq(pll->freq_tbl, rate); ++ f = qcom_find_freq_close(pll->freq_tbl, rate); + if (!f) + return -EINVAL; + +@@ -1305,6 +1328,7 @@ static unsigned long + clk_cpu_div_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) + { ++ const struct freq_tbl *f; + struct clk_fepll *pll = to_clk_fepll(hw); + u32 cdiv, pre_div; + u64 rate; +@@ -1325,7 +1349,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h + rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; + do_div(rate, pre_div); + +- return rate; ++ f = qcom_find_freq_close(pll->freq_tbl, rate); ++ if (!f) ++ return rate; ++ ++ return f->freq; + }; + + static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-5.4/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch b/target/linux/ipq40xx/patches-5.4/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch deleted file mode 100644 index e0078b7260..0000000000 --- a/target/linux/ipq40xx/patches-5.4/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 158acdbf0336f601971637f988b57a6a67a0869b Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Sun, 15 Dec 2019 13:10:50 +0100 -Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f - -Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix. -The chip has 4MB of total capacity, divided into a total of 64 sectors, -each 64KB sized. The chip also supports 4KB large sectors. -Additionally, it supports dual and quad read modes. - -Signed-off-by: David Bauer ---- - drivers/mtd/spi-nor/spi-nor.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -2344,6 +2344,8 @@ static const struct flash_info spi_nor_i - { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, -+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64, -+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, diff --git a/target/linux/ipq40xx/patches-5.4/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-5.4/701-dts-ipq4019-add-mdio-node.patch deleted file mode 100644 index b0a69433b1..0000000000 --- a/target/linux/ipq40xx/patches-5.4/701-dts-ipq4019-add-mdio-node.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 01:10:33 +0100 -Subject: [PATCH] dts: ipq4019: add mdio node for ethernet - -This patch adds the mdio device-tree node. -This is where the switch is connected to, so it's needed -for the ethernet interfaces. - -Note: The driver isn't anywhere close to be upstream, -so the info might change. ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -588,6 +588,34 @@ - status = "disabled"; - }; - -+ mdio: mdio@90000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "qcom,ipq4019-mdio"; -+ reg = <0x90000 0x64>; -+ status = "disabled"; -+ -+ ethphy0: ethernet-phy@0 { -+ reg = <0>; -+ }; -+ -+ ethphy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ ethphy2: ethernet-phy@2 { -+ reg = <2>; -+ }; -+ -+ ethphy3: ethernet-phy@3 { -+ reg = <3>; -+ }; -+ -+ ethphy4: ethernet-phy@4 { -+ reg = <4>; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch index a90ae0eb89..4cdeab637a 100644 --- a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch +++ b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch @@ -8,7 +8,7 @@ + tristate "Driver for Qualcomm Atheros IPQ40XX switches" + depends on HAS_IOMEM && OF + select SWCONFIG -+ ---help--- ++ help + This is the driver for Qualcomm Atheros IPQ40XX ESS switches. + endif # PHYLIB diff --git a/target/linux/ipq40xx/patches-5.4/721-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-5.4/721-dts-ipq4019-add-ethernet-essedma-node.patch deleted file mode 100644 index 6424dd5243..0000000000 --- a/target/linux/ipq40xx/patches-5.4/721-dts-ipq4019-add-ethernet-essedma-node.patch +++ /dev/null @@ -1,69 +0,0 @@ -From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 01:01:10 +0100 -Subject: [PATCH] dts: ipq4019: add ethernet ipqess node - -This patch adds the device-tree node for the ipqess ethernet -interfaces. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 60 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -699,6 +699,53 @@ - }; - }; - -+ gmac: ethernet@c080000 { -+ compatible = "qcom,ipq4019-ess-edma"; -+ reg = <0xc080000 0x8000>; -+ interrupts = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ -+ status = "disabled"; -+ -+ phy-mode = "internal"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ pause; -+ asym-pause; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch index 5157079762..5a245eb431 100644 --- a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch +++ b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch @@ -56,10 +56,11 @@ }; serial@78af000 { -@@ -110,6 +129,22 @@ +@@ -109,5 +128,41 @@ + wifi@a800000 { status = "ok"; }; - ++ + mdio@90000 { + status = "okay"; + }; @@ -76,9 +77,27 @@ + status = "okay"; + }; + - usb3_ss_phy: ssphy@9a000 { - status = "okay"; - }; ++ usb3_ss_phy: ssphy@9a000 { ++ status = "okay"; ++ }; ++ ++ usb3_hs_phy: hsphy@a6000 { ++ status = "okay"; ++ }; ++ ++ usb3: usb3@8af8800 { ++ status = "okay"; ++ }; ++ ++ usb2_hs_phy: hsphy@a8000 { ++ status = "okay"; ++ }; ++ ++ usb2: usb2@60f8800 { ++ status = "okay"; ++ }; + }; + }; --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts @@ -18,5 +18,73 @@