From: Wolfgang Denk Date: Tue, 14 Aug 2007 07:54:46 +0000 (+0200) Subject: Coding style cleanup, update CHANGELOG X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4ef35e53c693556c54b0c22d6f873de87bade253;p=project%2Fbcm63xx%2Fu-boot.git Coding style cleanup, update CHANGELOG Signed-off-by: Wolfgang Denk --- diff --git a/CHANGELOG b/CHANGELOG index 6ebf48725b..5472c8fe53 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,231 @@ +commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7 +Author: Wolfgang Denk +Date: Tue Aug 14 09:47:27 2007 +0200 + + Coding style cleanup; rebuild CHANGELOG + +commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a +Author: Randy Vinson +Date: Tue Feb 27 19:42:22 2007 -0700 + + 85xxCDS: Add make targets for legacy systems. + + The PCI ID select values on the Arcadia main board differ depending + on the version of the hardware. The standard configuration supports + Rev 3.1. The legacy target supports Rev 2.x. + + Signed-off-by Randy Vinson + +commit e41094c7e38177c755fbd9b182018069614f080d +Author: Andy Fleming +Date: Tue Aug 14 01:50:09 2007 -0500 + + 85xxCDS: Enable the VIA PCI-to-ISA bridge. + + Author: Randy Vinson + + Enable the PCI-to-ISA bridge in the VIA Southbridge located on the + Arcadia main board. + + Signed-off-by: Randy Vinson + Signed-off-by: York Sun + +commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71 +Author: Andy Fleming +Date: Tue Aug 14 00:14:25 2007 -0500 + + Add support for UEC to 8568 + + Signed-off-by: Haiying Wang + Signed-off-by: Andy Fleming + +commit c59e4091ffe0148398b9e9ff14a019ea038b7432 +Author: Haiying Wang +Date: Tue Jun 19 14:18:34 2007 -0400 + + Add PCI support for MPC8568MDS board + + This patch is against u-boot-mpc85xx.git of www.denx.com + + Signed-off-by: Haiying Wang + Signed-off-by: Ebony Zhu + +commit d111d6382c99fdea08c2312eeeae8786945e189a +Author: Haiying Wang +Date: Tue Jun 19 14:18:32 2007 -0400 + + Empirically set cpo and clk_adjust for mpc85xx DDR2 support + + This patch is against u-boot-mpc85xx.git of www.denx.com + + Setting cpo to 0x9 for frequencies higher than 333MHz is verified on + both MPC8548CDS board and MPC8568MDS board, especially for supporting + 533MHz DDR2. + + Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for + DDR2 on all current board versions especially ver 1.92 or later to bring + up. + + Signed-off-by: Haiying Wang + +commit 3db0bef59eab1155801618cef5c481e97553b597 +Author: Kumar Gala +Date: Tue Aug 7 18:07:27 2007 -0500 + + Use an absolute address when jumping out of 4k boot page + + On e500 when we leave the 4k boot page we should use an absolute address since + we don't know where the board code may want us to be really running at. + + Signed-off-by: Kumar Gala + +commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a +Author: Andy Fleming +Date: Mon Aug 13 14:49:59 2007 -0500 + + MPC85xx BA bits not set for 3-bit bank address DIMM + + The current implementation does not set the number of bank address bits + (BA) in the processor. The default assumes 2 logical bank bits. This + works fine for a DIMM that uses devices with 4 internal banks (SPD + byte17 = 0x4) but needs to be set appropriately for a DIMM that uses + devices with 8 internal banks (SPD byte17 = 0x8). + + Signed-off-by: Greg Davis + +commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1 +Author: Andy Fleming +Date: Mon Aug 13 14:38:06 2007 -0500 + + Fix minor 85xx warnings + + Some patches had inserted warnings into the build: + * mpc8560ads declared data without using it + * cpu_init declared ecm and immap without using it in all CONFIGs + * MPC8548CDS.h had its default filenames changed so that they contained + "\m" in the paths. Made the defaults not Windows-specific (or + anything-specific) + + Signed-off-by: Andy Fleming + +commit f2cff6b104f82b993bef6086ce0c97159bbe1add +Author: Ed Swarthout +Date: Fri Jul 27 01:50:52 2007 -0500 + + 8548cds PCIE support. + + Make the early L1 cache stack region guarded to prevent speculative + fetches outside the locked range. + + Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions. + init.S whitespace cleanup. + + Allow TEXT_BASE value to be specified on command line. This allows it + to be set to 0xfffc0000 which cuts the uboot binary in half. + + Clear and enable lbc and ecm errors. + + Update last_busno in device-tree for pci and pcie. + + Remove load of obsolete cpu/mpc85xx/pci.0 + + Signed-off-by: Ed Swarthout + Acked-by: Andy Fleming + +commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962 +Author: Ed Swarthout +Date: Fri Jul 27 01:50:51 2007 -0500 + + 8544ds PCIE support + + PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. + + Enable LBC and ECM errors and clear error registers. + + Add tftpflash env var to get uboot from tftp server and flash it. + + Add pci/pcie convenience env vars to display register space: + "run pcie3regs" to see all pcie3 ccsr registers + "run pcie3cfg" to see all cfg registers + Whitespace cleanup and MPC8544DS.h + + Enable CONFIG_INTERRUPTS. + + Signed-off-by: Ed Swarthout + Acked-by: Andy Fleming + +commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85 +Author: Andy Fleming +Date: Tue Aug 14 01:34:21 2007 -0500 + + 85xx start.S cleanup and exception support + + From: Ed Swarthout + + Support external interrupts from platform to eliminate system hangs. + Define CONFIG_INTERRUPTS board configure option to enable. + Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC. + + Remove extra cpu initialization redundant with hardware initialization. + Whitespace cleanup. + + Define and use _START_OFFSET consistent with other processors using + ppc_asm.tmpl + + Move additional code from .text to boot page to make room for + exception vectors at start of image. + + Handle Machine Check, External and Critical exceptions. + + Fix e500 machine check error determination in traps.c + + TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half. + + Signed-off-by: Ed Swarthout + Acked-by: Andy Fleming + +commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47 +Author: Andy Fleming +Date: Tue Aug 14 01:33:18 2007 -0500 + + Add MPC8544DS README + + Signed-off-by: Andy Fleming + +commit 40c7f9b0de4e300370adfc704128fa0f79a143b6 +Author: Ed Swarthout +Date: Fri Jul 27 01:50:48 2007 -0500 + + 85xx allow debugger to configure ddr. + + Only check for mpc8548 rev 1 when compiled for 8548. + + Signed-off-by: Ed Swarthout + Acked-by: Andy Fleming + +commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704 +Author: Ed Swarthout +Date: Fri Jul 27 01:50:47 2007 -0500 + + mpc85xx L2 cache reporting and SRAM relocation option. + + Allow debugger to override flash cs0/cs1 settings to enable alternate + boot regions + + Signed-off-by: Ed Swarthout + Acked-by: Andy Fleming + +commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f +Author: Ed Swarthout +Date: Fri Jul 27 01:50:46 2007 -0500 + + e500 needs ppc_asm.tmp MCK_EXCEPTION + + Always define MCK_EXCEPTION macro - so e500 can use it too. + + Signed-off-by: Ed Swarthout + Acked-by: Andy Fleming + commit 53a5c424bf8655b7b4e2c305a441963259a26a81 Author: David Updegraff Date: Mon Jun 11 10:41:07 2007 -0500 diff --git a/doc/README.mpc8544ds b/doc/README.mpc8544ds index 14c7f765e4..bf257a0054 100644 --- a/doc/README.mpc8544ds +++ b/doc/README.mpc8544ds @@ -98,7 +98,7 @@ Likely, that .dts file will come from here; linux-2.6/arch/powerpc/boot/dts/mpc8544ds.dts -After placing the DTB file in your TFTP disk area, +After placing the DTB file in your TFTP disk area, you can download that dtb file using a command like: tftp 900000 mpc8544ds.dtb