From: Antonio Flores Date: Thu, 11 Apr 2024 16:35:00 +0000 (-0400) Subject: rockchip: add Bananapi-R2 Pro board support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4ebcc5375a5f3610164a3b605437b4392f021454;p=openwrt%2Fopenwrt.git rockchip: add Bananapi-R2 Pro board support Hardware spec: - Rockchip RK3568 Quad-core ARM Cortex-A55 CPU 2GHz - GPU Mali-G52 1-Core-2EE OpenGL ES3.2 Vu1kn 1.1 OpenCL 2.0 - Memory2G DDR3 SDRAM (option 4G) - Storage Onboard 16GB eMMC Flash, Micro SD-Card slot, SATA 3.0 Port,SPI flash - Network 5 x 10/100/1000 Mbit/s Ethernet MT7531 - Display 1 HDMI port, 2 DSI interface(1 DSI can change to LVDS by software) - Camera 1 CSI camera interface - Audio Output HDMI & I2S & Speaker & Headphone - USB port USB 3.0 PORT (x2), micro USB OTG (x1) - PCIE 1 mini pcie interface & 1 M.2 key-e interface - Remote IR Receiver (x1) - GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). - Switches Reset button, Power button, U-boot button - LED Power Status - Power Source 12 volt 2A via DC Power Installation: Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*) Boot from the SD card 1-hold down the MaskRom button 2-Connect DC power 3-Wait 5 seconds, release the button. eMMC Installation: 1-Uncompress the OpenWrt sysupgrade image 2-fash to eMMC dd if=openwrt-rockchip-armv8-sinovoip_bpi-r2-pro-squashfs-sysupgrade.img of=/dev/mmcblk1 sync 3-remove SD card reboot Signed-off-by: Antonio Flores --- diff --git a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network index d6e97b91fa..8729bd52f2 100644 --- a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network +++ b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network @@ -23,6 +23,9 @@ rockchip_setup_interfaces() friendlyarm,nanopi-r5s) ucidef_set_interfaces_lan_wan 'eth1 eth2' 'eth0' ;; + sinovoip,rk3568-bpi-r2pro) + ucidef_set_interfaces_lan_wan 'lan0 lan1 lan2 lan3' 'eth0' + ;; *) ucidef_set_interface_lan 'eth0' ;; @@ -44,7 +47,8 @@ rockchip_setup_macs() ;; friendlyarm,nanopi-r2c-plus|\ friendlyarm,nanopi-r4s|\ - friendlyarm,nanopi-r5s) + friendlyarm,nanopi-r5s|\ + sinovoip,rk3568-bpi-r2pro) wan_mac=$(macaddr_generate_from_mmc_cid mmcblk1) lan_mac=$(macaddr_add "$wan_mac" 1) ;; diff --git a/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity b/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity index 5753d1e856..8bbce1c328 100644 --- a/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity +++ b/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity @@ -44,7 +44,8 @@ friendlyarm,nanopi-r4s-enterprise) set_interface_core 20 "eth1" ;; friendlyarm,nanopi-r5c|\ -radxa,e25) +radxa,e25|\ +sinovoip,rk3568-bpi-r2pro) set_interface_core 2 "eth0" set_interface_core 4 "eth1" ;; diff --git a/target/linux/rockchip/image/armv8.mk b/target/linux/rockchip/image/armv8.mk index d457058282..df0ca6ffb5 100644 --- a/target/linux/rockchip/image/armv8.mk +++ b/target/linux/rockchip/image/armv8.mk @@ -130,6 +130,15 @@ define Device/radxa_rock-pi-e endef TARGET_DEVICES += radxa_rock-pi-e +define Device/sinovoip_bpi-r2-pro + DEVICE_VENDOR := Sinovoip + DEVICE_MODEL := Bananapi-R2 Pro + SOC := rk3568 + SUPPORTED_DEVICES := sinovoip,rk3568-bpi-r2pro + DEVICE_PACKAGES := kmod-ata-ahci-dwc +endef +TARGET_DEVICES += sinovoip_bpi-r2-pro + define Device/xunlong_orangepi-r1-plus DEVICE_VENDOR := Xunlong DEVICE_MODEL := Orange Pi R1 Plus diff --git a/target/linux/rockchip/patches-6.1/030-v6.9-arm64-dts-rockchip-adjust-vendor-on-Banana-Pi-R2-Pro.patch b/target/linux/rockchip/patches-6.1/030-v6.9-arm64-dts-rockchip-adjust-vendor-on-Banana-Pi-R2-Pro.patch new file mode 100644 index 0000000000..9be609f661 --- /dev/null +++ b/target/linux/rockchip/patches-6.1/030-v6.9-arm64-dts-rockchip-adjust-vendor-on-Banana-Pi-R2-Pro.patch @@ -0,0 +1,27 @@ +From 437644753208092f642b7669c69da606aa07dfb4 Mon Sep 17 00:00:00 2001 +From: Tim Lunn +Date: Wed, 14 Feb 2024 15:07:30 +1100 +Subject: [PATCH] arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board + +Adjust compatible string to match the board vendor of Sinovoip + +Signed-off-by: Tim Lunn +Reviewed-by: Dragan Simic +Acked-by: Conor Dooley +Link: https://lore.kernel.org/r/20240214040731.3069111-4-tim@feathertop.org +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +@@ -13,7 +13,7 @@ + + / { + model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; +- compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568"; ++ compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; diff --git a/target/linux/rockchip/patches-6.1/031-v6.10arm64-dts-rockchip-set-PHY-address-of-MT7531-switch-.patch b/target/linux/rockchip/patches-6.1/031-v6.10arm64-dts-rockchip-set-PHY-address-of-MT7531-switch-.patch new file mode 100644 index 0000000000..6a5622b813 --- /dev/null +++ b/target/linux/rockchip/patches-6.1/031-v6.10arm64-dts-rockchip-set-PHY-address-of-MT7531-switch-.patch @@ -0,0 +1,40 @@ +From a2ac2a1b02590a22a236c43c455f421cdede45f5 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Thu, 14 Mar 2024 15:24:35 +0300 +Subject: [PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to + 0x1f +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two +findings that support this. There's no bootstrapping option to change the +PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY +address of the switch. So the reg property on the device tree is currently +ignored by the Linux driver. + +Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that +has this switch. + +Signed-off-by: Arınç ÜNAL +Fixes: c1804463e5c6 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board") +Link: https://lore.kernel.org/r/20240314-for-rockchip-mt7531-phy-address-v1-1-743b5873358f@arinc9.com +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +@@ -521,9 +521,9 @@ + #address-cells = <1>; + #size-cells = <0>; + +- switch@0 { ++ switch@1f { + compatible = "mediatek,mt7531"; +- reg = <0>; ++ reg = <0x1f>; + + ports { + #address-cells = <1>; diff --git a/target/linux/rockchip/patches-6.1/032-v6.10-arm64-dts-rockchip-regulator-for-sd-needs-to-be-alwa.patch b/target/linux/rockchip/patches-6.1/032-v6.10-arm64-dts-rockchip-regulator-for-sd-needs-to-be-alwa.patch new file mode 100644 index 0000000000..dca18f5c58 --- /dev/null +++ b/target/linux/rockchip/patches-6.1/032-v6.10-arm64-dts-rockchip-regulator-for-sd-needs-to-be-alwa.patch @@ -0,0 +1,33 @@ +From 433d54818f64a2fe0562f8c04c7a81f562368515 Mon Sep 17 00:00:00 2001 +From: Jose Ignacio Tornos Martinez +Date: Tue, 5 Mar 2024 15:32:18 +0100 +Subject: [PATCH] arm64: dts: rockchip: regulator for sd needs to be always on + for BPI-R2Pro + +With default dts configuration for BPI-R2Pro, the regulator for sd card is +powered off when reboot is commanded, and the only solution to detect the +sd card again, and therefore, allow rebooting from there, is to do a +hardware reset. + +Configure the regulator for sd to be always on for BPI-R2Pro in order to +avoid this issue. + +Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro") +Signed-off-by: Jose Ignacio Tornos Martinez +Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +@@ -412,6 +412,8 @@ + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; ++ regulator-always-on; ++ regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; +