From: Jonas Gorski Date: Fri, 10 Apr 2015 10:29:04 +0000 (+0000) Subject: b53: clean up code to match kernel style better X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4e826d8303d305027bcfd726372a6cc2cf381d74;p=openwrt%2Fstaging%2Fwigyori.git b53: clean up code to match kernel style better * properly enclose macro arguments in paranthesis on use * remove trailing white space * convert C99 // comments * add missing blank lines after declaration * remove braces from single statement blocks * split lines > 80 chars (except for one) Signed-off-by: Jonas Gorski SVN-Revision: 45356 --- diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c index e44d1945ee..d2bb51ab4a 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c @@ -525,7 +525,8 @@ static int b53_switch_reset(struct b53_device *dev) return -EINVAL; } } - } else if ((is531x5(dev) || is5301x(dev)) && dev->sw_dev.cpu_port == B53_CPU_PORT) { + } else if ((is531x5(dev) || is5301x(dev)) && + dev->sw_dev.cpu_port == B53_CPU_PORT) { u8 mii_port_override; b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, @@ -1161,7 +1162,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .alias = "bcm53011", .vlans = 4096, .enabled_ports = 0x1f, - .cpu_port = B53_CPU_PORT_25, // TODO: auto detect + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ .vta_regs = B53_VTA_REGS, .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, @@ -1174,7 +1175,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .alias = "bcm53011", .vlans = 4096, .enabled_ports = 0x1f, - .cpu_port = B53_CPU_PORT_25, // TODO: auto detect + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ .vta_regs = B53_VTA_REGS, .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, @@ -1187,7 +1188,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .alias = "bcm53011", .vlans = 4096, .enabled_ports = 0x1f, - .cpu_port = B53_CPU_PORT_25, // TODO: auto detect + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ .vta_regs = B53_VTA_REGS, .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, @@ -1200,7 +1201,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .alias = "bcm53018", .vlans = 4096, .enabled_ports = 0x1f, - .cpu_port = B53_CPU_PORT_25, // TODO: auto detect + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ .vta_regs = B53_VTA_REGS, .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, @@ -1213,7 +1214,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .alias = "bcm53019", .vlans = 4096, .enabled_ports = 0x1f, - .cpu_port = B53_CPU_PORT_25, // TODO: auto detect + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ .vta_regs = B53_VTA_REGS, .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, @@ -1307,7 +1308,8 @@ static int b53_switch_init(struct b53_device *dev) dev->reset_gpio = b53_switch_get_reset_gpio(dev); if (dev->reset_gpio >= 0) { - ret = devm_gpio_request_one(dev->dev, dev->reset_gpio, GPIOF_OUT_INIT_HIGH, "robo_reset"); + ret = devm_gpio_request_one(dev->dev, dev->reset_gpio, + GPIOF_OUT_INIT_HIGH, "robo_reset"); if (ret) return ret; } diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_mmap.c b/target/linux/generic/files/drivers/net/phy/b53/b53_mmap.c index b8681660cc..ab1895e9b5 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_mmap.c +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_mmap.c @@ -221,9 +221,8 @@ static int b53_mmap_remove(struct platform_device *pdev) { struct b53_device *dev = platform_get_drvdata(pdev); - if (dev) { + if (dev) b53_switch_remove(dev); - } return 0; } diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h b/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h index bc9b53368b..4336fdba66 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h @@ -150,7 +150,7 @@ static inline int is63xx(struct b53_device *dev) return 0; #endif } - + static inline int is5301x(struct b53_device *dev) { return dev->chip_id == BCM53010_DEVICE_ID || diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h index 7e50bb4e67..534170832a 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h @@ -31,12 +31,12 @@ #define B53_MEM_ACCESS_PAGE 0x08 /* Memory access */ /* PHY Registers */ -#define B53_PORT_MII_PAGE(i) (0x10 + i) /* Port i MII Registers */ +#define B53_PORT_MII_PAGE(i) (0x10 + (i)) /* Port i MII Registers */ #define B53_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */ #define B53_ALL_PORT_PAGE 0x19 /* All ports MII (broadcast) */ /* MIB registers */ -#define B53_MIB_PAGE(i) (0x20 + i) +#define B53_MIB_PAGE(i) (0x20 + (i)) /* Quality of Service (QoS) Registers */ #define B53_QOS_PAGE 0x30 @@ -58,7 +58,7 @@ *************************************************************************/ /* Port Control Register (8 bit) */ -#define B53_PORT_CTRL(i) (0x00 + i) +#define B53_PORT_CTRL(i) (0x00 + (i)) #define PORT_CTRL_RX_DISABLE BIT(0) #define PORT_CTRL_TX_DISABLE BIT(1) #define PORT_CTRL_RX_BCST_EN BIT(2) /* Broadcast RX (P8 only) */ @@ -109,7 +109,7 @@ * Please note that not all ports are available on every hardware, e.g. BCM5301X * don't include overriding port 6, BCM63xx also have some limitations. */ -#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + i) +#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + (i)) #define GMII_PO_LINK BIT(0) #define GMII_PO_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */ #define GMII_PO_SPEED_S 2 diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_spi.c b/target/linux/generic/files/drivers/net/phy/b53/b53_spi.c index 8c6b171e75..469a8ddde3 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_spi.c +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_spi.c @@ -86,6 +86,7 @@ static inline int b53_spi_set_page(struct spi_device *spi, u8 page) static inline int b53_prepare_reg_access(struct spi_device *spi, u8 page) { int ret = b53_spi_clear_status(spi); + if (ret) return ret; @@ -144,6 +145,7 @@ static int b53_spi_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) static int b53_spi_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) { int ret = b53_spi_read(dev, page, reg, (u8 *)val, 2); + if (!ret) *val = le16_to_cpu(*val); @@ -153,6 +155,7 @@ static int b53_spi_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) static int b53_spi_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) { int ret = b53_spi_read(dev, page, reg, (u8 *)val, 4); + if (!ret) *val = le32_to_cpu(*val); @@ -174,6 +177,7 @@ static int b53_spi_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) static int b53_spi_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) { int ret = b53_spi_read(dev, page, reg, (u8 *)val, 8); + if (!ret) *val = le64_to_cpu(*val); @@ -303,9 +307,8 @@ static int b53_spi_remove(struct spi_device *spi) { struct b53_device *dev = spi_get_drvdata(spi); - if (dev) { + if (dev) b53_switch_remove(dev); - } return 0; } diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_srab.c b/target/linux/generic/files/drivers/net/phy/b53/b53_srab.c index a68e27540a..012daa3a51 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_srab.c +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_srab.c @@ -96,7 +96,7 @@ static int b53_srab_op(struct b53_device *dev, u8 page, u8 reg, u32 op) B53_SRAB_CMDSTAT_GORDYN | op; writel(cmdstat, regs + B53_SRAB_CMDSTAT); - + /* check if operation completed */ for (i = 0; i < 5; ++i) { cmdstat = readl(regs + B53_SRAB_CMDSTAT); @@ -189,7 +189,7 @@ static int b53_srab_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) *val = readl(regs + B53_SRAB_RD_L); *val += ((u64)readl(regs + B53_SRAB_RD_H) & 0xffff) << 32; - + err: b53_srab_release_grant(dev); @@ -358,9 +358,8 @@ static int b53_srab_remove(struct platform_device *pdev) { struct b53_device *dev = platform_get_drvdata(pdev); - if (dev) { + if (dev) b53_switch_remove(dev); - } return 0; }