From: Yaniv Rosner Date: Tue, 27 Nov 2012 03:46:29 +0000 (+0000) Subject: bnx2x: Add support for 20G-KR2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4e7b4997886e1dcbb0024308fb474c5994e8af2b;p=openwrt%2Fstaging%2Fblogic.git bnx2x: Add support for 20G-KR2 Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index f478bedf9e9e..525a9bc30cb3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -2167,6 +2167,8 @@ struct shmem2_region { u32 reserved2; /* Offset 0x148 */ u32 reserved3; /* Offset 0x14C */ u32 reserved4; /* Offset 0x150 */ + u32 link_attr_sync[PORT_MAX]; /* Offset 0x154 */ + #define LINK_ATTR_SYNC_KR2_ENABLE (1<<0) }; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index c98da25f22eb..eb44b230676e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -121,6 +121,7 @@ #define GP_STATUS_10G_XFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI #define GP_STATUS_20G_DXGXS MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS #define GP_STATUS_10G_SFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI +#define GP_STATUS_20G_KR2 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 #define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD #define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD #define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD @@ -1664,7 +1665,10 @@ static void bnx2x_xmac_init(struct link_params *params, u32 max_speed) * ports of the path */ - if ((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) && + if (((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) || + (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) || + (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE)) && + is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) & MISC_REGISTERS_RESET_REG_2_XMAC)) { DP(NETIF_MSG_LINK, @@ -1760,6 +1764,18 @@ static int bnx2x_xmac_enable(struct link_params *params, */ REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 0); + /* When XMAC is in XLGMII mode, disable sending idles for fault + * detection. + */ + if (!(params->phy[INT_PHY].flags & FLAGS_TX_ERROR_CHECK)) { + REG_WR(bp, xmac_base + XMAC_REG_RX_LSS_CTRL, + (XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE | + XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE)); + REG_WR(bp, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0); + REG_WR(bp, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS | + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS); + } /* Set Max packet size */ REG_WR(bp, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710); @@ -1780,6 +1796,12 @@ static int bnx2x_xmac_enable(struct link_params *params, /* Enable TX and RX */ val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN; + /* Set MAC in XLGMII mode for dual-mode */ + if ((vars->line_speed == SPEED_20000) && + (params->phy[INT_PHY].supported & + SUPPORTED_20000baseKR2_Full)) + val |= XMAC_CTRL_REG_XLGMII_ALIGN_ENB; + /* Check loopback mode */ if (lb) val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK; @@ -2096,6 +2118,16 @@ static void bnx2x_update_mng(struct link_params *params, u32 link_status) port_mb[params->port].link_status), link_status); } +static void bnx2x_update_link_attr(struct link_params *params, u32 link_attr) +{ + struct bnx2x *bp = params->bp; + + if (SHMEM2_HAS(bp, link_attr_sync)) + REG_WR(bp, params->shmem2_base + + offsetof(struct shmem2_region, + link_attr_sync[params->port]), link_attr); +} + static void bnx2x_update_pfc_nig(struct link_params *params, struct link_vars *vars, struct bnx2x_nig_brb_pfc_port_params *nig_params) @@ -3147,6 +3179,15 @@ static void bnx2x_cl45_read_or_write(struct bnx2x *bp, struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, devad, reg, val | or_val); } +static void bnx2x_cl45_read_and_write(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 devad, u16 reg, u16 and_val) +{ + u16 val; + bnx2x_cl45_read(bp, phy, devad, reg, &val); + bnx2x_cl45_write(bp, phy, devad, reg, val & and_val); +} + int bnx2x_phy_read(struct link_params *params, u8 phy_addr, u8 devad, u16 reg, u16 *ret_val) { @@ -3551,6 +3592,44 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, * init configuration, and set/clear SGMII flag. Internal * phy init is done purely in phy_init stage. */ +static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 i; + static struct bnx2x_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0xa157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xcbe2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0x7537}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0xa157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xcbe2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0x7537}, + /* Step 2 - Configure the NP registers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000a}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6400}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0620}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x6464}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x3150}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x3150}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620} + }; + DP(NETIF_MSG_LINK, "Enabling 20G-KR2\n"); + + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL49_USERB0_CTRL, (3<<6)); + + for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + /* Start KR2 work-around timer which handles BCM8073 link-parner */ + vars->link_attr_sync |= LINK_ATTR_SYNC_KR2_ENABLE; + bnx2x_update_link_attr(params, vars->link_attr_sync); +} static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, struct link_params *params) @@ -3564,6 +3643,21 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, MDIO_WC_REG_DIGITAL4_MISC5, 0xc000); } +static void bnx2x_warpcore_restart_AN_KR(struct bnx2x_phy *phy, + struct link_params *params) +{ + /* Restart autoneg on the leading lane only */ + struct bnx2x *bp = params->bp; + u16 lane = bnx2x_get_warpcore_lane(phy, params); + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200); + + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); +} + static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { @@ -3576,7 +3670,9 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, {MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415}, {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190}, /* Disable Autoneg: re-enable it after adv is done. */ - {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0} + {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0}, + {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0}, }; DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); /* Set to default registers that may be overriden by 10G force */ @@ -3586,7 +3682,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl); - cl72_ctrl &= 0xf8ff; + cl72_ctrl &= 0x08ff; cl72_ctrl |= 0x3800; bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl); @@ -3624,6 +3720,16 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | (0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | (0x09 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); + /* Configure the next lane if dual mode */ + if (phy->flags & FLAGS_WC_DUAL_MODE) + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*(lane+1), + ((0x02 << + MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | + (0x06 << + MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | + (0x09 << + MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL, 0x03f0); @@ -3670,10 +3776,26 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1f); - /* Enable Autoneg */ - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200); + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) || + (phy->req_line_speed == SPEED_20000)) { + + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX1_PCI_CTRL + (0x10*lane), + (1<<11)); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXS_X2_CONTROL3, 0x7); + bnx2x_set_aer_mmd(params, phy); + bnx2x_warpcore_enable_AN_KR2(phy, params, vars); + } + + /* Enable Autoneg: only on the main lane */ + bnx2x_warpcore_restart_AN_KR(phy, params); } static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, @@ -3692,9 +3814,7 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1}, {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa}, /* Leave cl72 training enable, needed for KR */ - {MDIO_PMA_DEVAD, - MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150, - 0x2} + {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2} }; for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++) @@ -3858,10 +3978,57 @@ static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy, MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, (val & 0x7FFF)); } -static void bnx2x_warpcore_set_20G_KR2(struct bnx2x *bp, - struct bnx2x_phy *phy) +static void bnx2x_warpcore_set_20G_force_KR2(struct bnx2x_phy *phy, + struct link_params *params) { - DP(NETIF_MSG_LINK, "KR2 still not supported !!!\n"); + u16 val; + struct bnx2x *bp = params->bp; + /* Set global registers, so set AER lane to 0 */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + + /* Disable sequencer */ + bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~(1<<13)); + + bnx2x_set_aer_mmd(params, phy); + + bnx2x_cl45_read_and_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_PMD_KR_CONTROL, ~(1<<1)); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CTRL, 0); + /* Turn off CL73 */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL73_USERB0_CTRL, &val); + val &= ~(1<<5); + val |= (1<<6); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL73_USERB0_CTRL, val); + + /* Set 20G KR2 force speed */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x1f); + + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, (1<<7)); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &val); + val &= ~(3<<14); + val |= (1<<15); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0x835A); + + /* Enable sequencer (over lane 0) */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, (1<<13)); + + bnx2x_set_aer_mmd(params, phy); } static void bnx2x_warpcore_set_20G_DXGXS(struct bnx2x *bp, @@ -4293,16 +4460,14 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, bnx2x_sfp_module_detection(phy, params); break; - case PORT_HW_CFG_NET_SERDES_IF_KR2: - if (vars->line_speed != SPEED_20000) { - DP(NETIF_MSG_LINK, "Speed not supported yet\n"); - return; + if (!params->loopback_mode) { + bnx2x_warpcore_enable_AN_KR(phy, params, vars); + } else { + DP(NETIF_MSG_LINK, "Setting KR 20G-Force\n"); + bnx2x_warpcore_set_20G_force_KR2(phy, params); } - DP(NETIF_MSG_LINK, "Setting 20G KR2\n"); - bnx2x_warpcore_set_20G_KR2(bp, phy); break; - default: DP(NETIF_MSG_LINK, "Unsupported Serdes Net Interface 0x%x\n", @@ -4413,8 +4578,9 @@ static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "Setting Warpcore loopback type %x, speed %d\n", params->loopback_mode, phy->req_line_speed); - if (phy->req_line_speed < SPEED_10000) { - /* 10/100/1000 */ + if (phy->req_line_speed < SPEED_10000 || + phy->supported & SUPPORTED_20000baseKR2_Full) { + /* 10/100/1000/20G-KR2 */ /* Update those 1-copy registers */ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, @@ -4427,18 +4593,20 @@ static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy, lane = bnx2x_get_warpcore_lane(phy, params); bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16); + val16 |= (1<flags & FLAGS_WC_DUAL_MODE) + val16 |= (2<feature_config_flags &= ~FEATURE_CONFIG_PFC_ENABLED; + if (SHMEM2_HAS(bp, link_attr_sync)) + vars->link_attr_sync = SHMEM2_RD(bp, + link_attr_sync[params->port]); + DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n", vars->link_status, vars->phy_link_up, vars->aeu_int_mask); DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n", @@ -5332,6 +5504,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, vars->link_status |= LINK_10GTFD; break; case GP_STATUS_20G_DXGXS: + case GP_STATUS_20G_KR2: vars->line_speed = SPEED_20000; vars->link_status |= LINK_20GTFD; break; @@ -5439,7 +5612,15 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, int rc = 0; lane = bnx2x_get_warpcore_lane(phy, params); /* Read gp_status */ - if (phy->req_line_speed > SPEED_10000) { + if ((params->loopback_mode) && + (phy->flags & FLAGS_WC_DUAL_MODE)) { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up); + link_up &= 0x1; + } else if ((phy->req_line_speed > SPEED_10000) && + (phy->supported & SUPPORTED_20000baseMLD2_Full)) { u16 temp_link_up; bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, 1, &temp_link_up); @@ -5452,12 +5633,22 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, bnx2x_ext_phy_resolve_fc(phy, params, vars); } else { bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1); + MDIO_WC_REG_GP2_STATUS_GP_2_1, + &gp_status1); DP(NETIF_MSG_LINK, "0x81d1 = 0x%x\n", gp_status1); - /* Check for either KR or generic link up. */ - gp_status1 = ((gp_status1 >> 8) & 0xf) | - ((gp_status1 >> 12) & 0xf); - link_up = gp_status1 & (1 << lane); + /* Check for either KR, 1G, or AN up. */ + link_up = ((gp_status1 >> 8) | + (gp_status1 >> 12) | + (gp_status1)) & + (1 << lane); + if (phy->supported & SUPPORTED_20000baseKR2_Full) { + u16 an_link; + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &an_link); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &an_link); + link_up |= (an_link & (1<<2)); + } if (link_up && SINGLE_MEDIA_DIRECT(params)) { u16 pd, gp_status4; if (phy->req_line_speed == SPEED_AUTO_NEG) { @@ -5522,7 +5713,7 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, if ((lane & 1) == 0) gp_speed <<= 8; gp_speed &= 0x3f00; - + link_up = !!link_up; rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed, duplex); @@ -11564,9 +11755,11 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, phy->media_type = ETH_PHY_KR; phy->flags |= FLAGS_WC_DUAL_MODE; phy->supported &= (SUPPORTED_20000baseKR2_Full | + SUPPORTED_Autoneg | SUPPORTED_FIBRE | SUPPORTED_Pause | SUPPORTED_Asym_Pause); + phy->flags &= ~FLAGS_TX_ERROR_CHECK; break; default: DP(NETIF_MSG_LINK, "Unknown WC interface type 0x%x\n", @@ -12018,13 +12211,17 @@ static void bnx2x_init_xgxs_loopback(struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; + struct bnx2x_phy *int_phy = ¶ms->phy[INT_PHY]; vars->link_up = 1; vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->duplex = DUPLEX_FULL; if (params->req_line_speed[0] == SPEED_1000) vars->line_speed = SPEED_1000; + else if ((params->req_line_speed[0] == SPEED_20000) || + (int_phy->flags & FLAGS_WC_DUAL_MODE)) + vars->line_speed = SPEED_20000; else - vars->line_speed = SPEED_10000; + vars->line_speed = SPEED_10000; if (!USES_WARPCORE(bp)) bnx2x_xgxs_deassert(params); @@ -13139,6 +13336,108 @@ static void bnx2x_sfp_tx_fault_detection(struct bnx2x_phy *phy, } } } +static void bnx2x_disable_kr2(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + int i; + static struct bnx2x_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} + }; + DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); + + for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; + bnx2x_update_link_attr(params, vars->link_attr_sync); + + /* Restart AN on leading lane */ + bnx2x_warpcore_restart_AN_KR(phy, params); +} + +static void bnx2x_kr2_recovery(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "KR2 recovery\n"); + bnx2x_warpcore_enable_AN_KR2(phy, params, vars); + bnx2x_warpcore_restart_AN_KR(phy, params); +} + +static void bnx2x_check_kr2_wa(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + u16 base_page, next_page, not_kr2_device, lane; + int sigdet = bnx2x_warpcore_get_sigdet(phy, params); + + if (!sigdet) { + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) + bnx2x_kr2_recovery(params, vars, phy); + return; + } + + lane = bnx2x_get_warpcore_lane(phy, params); + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &base_page); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG2, &next_page); + bnx2x_set_aer_mmd(params, phy); + + /* CL73 has not begun yet */ + if (base_page == 0) { + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) + bnx2x_kr2_recovery(params, vars, phy); + return; + } + + /* In case NP bit is not set in the BasePage, or it is set, + * but only KX is advertised, declare this link partner as non-KR2 + * device. + */ + not_kr2_device = (((base_page & 0x8000) == 0) || + (((base_page & 0x8000) && + ((next_page & 0xe0) == 0x2)))); + + /* In case KR2 is already disabled, check if we need to re-enable it */ + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + if (!not_kr2_device) { + DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, + next_page); + bnx2x_kr2_recovery(params, vars, phy); + } + return; + } + /* KR2 is enabled, but not KR2 device */ + if (not_kr2_device) { + /* Disable KR2 on both lanes */ + DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, next_page); + bnx2x_disable_kr2(params, vars, phy); + return; + } +} + void bnx2x_period_func(struct link_params *params, struct link_vars *vars) { u16 phy_idx; @@ -13156,6 +13455,9 @@ void bnx2x_period_func(struct link_params *params, struct link_vars *vars) if (CHIP_IS_E3(bp)) { struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; bnx2x_set_aer_mmd(params, phy); + if ((phy->supported & SUPPORTED_20000baseKR2_Full) && + (phy->speed_cap_mask & SPEED_20000)) + bnx2x_check_kr2_wa(params, vars, phy); bnx2x_check_over_curr(params, vars); if (vars->rx_tx_asic_rst) bnx2x_warpcore_config_runtime(phy, params, vars); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index ba981ced628b..33940fbe52c4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -347,6 +347,8 @@ struct link_vars { u8 rx_tx_asic_rst; u8 turn_to_run_wc_rt; u16 rsrv2; + /* The same definitions as the shmem2 parameter */ + u32 link_attr_sync; }; /***********************************************************/ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 7d93adb57f31..f8d432af2563 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -5498,6 +5498,7 @@ #define XMAC_CTRL_REG_RX_EN (0x1<<1) #define XMAC_CTRL_REG_SOFT_RESET (0x1<<6) #define XMAC_CTRL_REG_TX_EN (0x1<<0) +#define XMAC_CTRL_REG_XLGMII_ALIGN_ENB (0x1<<7) #define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1<<18) #define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1<<17) #define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON (0x1<<1) @@ -5518,11 +5519,14 @@ #define XMAC_REG_PAUSE_CTRL 0x68 #define XMAC_REG_PFC_CTRL 0x70 #define XMAC_REG_PFC_CTRL_HI 0x74 +#define XMAC_REG_RX_LSS_CTRL 0x50 #define XMAC_REG_RX_LSS_STATUS 0x58 /* [RW 14] Maximum packet size in receive direction; exclusive of preamble & * CRC in strip mode */ #define XMAC_REG_RX_MAX_SIZE 0x40 #define XMAC_REG_TX_CTRL 0x20 +#define XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE (0x1<<0) +#define XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE (0x1<<1) /* [RW 16] Indirect access to the XX table of the XX protection mechanism. The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] - header pointer. */ @@ -6688,6 +6692,7 @@ #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI 0x1B00 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS 0x1E00 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI 0x1F00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 0x3900 #define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130 @@ -7062,7 +7067,8 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000 -#define MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150 0x96 +#define MDIO_WC_REG_PCS_STATUS2 0x0021 +#define MDIO_WC_REG_PMD_KR_CONTROL 0x0096 #define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000 #define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e #define MDIO_WC_REG_XGXSBLK1_DESKEW 0x8010 @@ -7094,6 +7100,7 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130 #define MDIO_WC_REG_PAR_DET_10G_CTRL 0x8131 #define MDIO_WC_REG_XGXS_X2_CONTROL2 0x8141 +#define MDIO_WC_REG_XGXS_X2_CONTROL3 0x8142 #define MDIO_WC_REG_XGXS_RX_LN_SWAP1 0x816B #define MDIO_WC_REG_XGXS_TX_LN_SWAP1 0x8169 #define MDIO_WC_REG_GP2_STATUS_GP_2_0 0x81d0 @@ -7128,6 +7135,7 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET 0x0a #define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK 0x7c00 #define MDIO_WC_REG_TX_FIR_TAP_ENABLE 0x8000 +#define MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP 0x82e2 #define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL 0x82e3 #define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL 0x82e6 #define MDIO_WC_REG_CL72_USERB0_CL72_BR_DEF_CTRL 0x82e7 @@ -7145,9 +7153,16 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_DIGITAL4_MISC5 0x833e #define MDIO_WC_REG_DIGITAL5_MISC6 0x8345 #define MDIO_WC_REG_DIGITAL5_MISC7 0x8349 +#define MDIO_WC_REG_DIGITAL5_LINK_STATUS 0x834d #define MDIO_WC_REG_DIGITAL5_ACTUAL_SPEED 0x834e #define MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL 0x8350 #define MDIO_WC_REG_CL49_USERB0_CTRL 0x8368 +#define MDIO_WC_REG_CL73_USERB0_CTRL 0x8370 +#define MDIO_WC_REG_CL73_USERB0_USTAT 0x8371 +#define MDIO_WC_REG_CL73_BAM_CTRL1 0x8372 +#define MDIO_WC_REG_CL73_BAM_CTRL2 0x8373 +#define MDIO_WC_REG_CL73_BAM_CTRL3 0x8374 +#define MDIO_WC_REG_CL73_BAM_CODE_FIELD 0x837b #define MDIO_WC_REG_EEE_COMBO_CONTROL0 0x8390 #define MDIO_WC_REG_TX66_CONTROL 0x83b0 #define MDIO_WC_REG_RX66_CONTROL 0x83c0 @@ -7161,7 +7176,17 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_RX66_SCW3_MASK 0x83c9 #define MDIO_WC_REG_FX100_CTRL1 0x8400 #define MDIO_WC_REG_FX100_CTRL3 0x8402 - +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL5 0x8436 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL6 0x8437 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL7 0x8438 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL9 0x8439 +#define MDIO_WC_REG_CL82_USERB1_RX_CTRL10 0x843a +#define MDIO_WC_REG_CL82_USERB1_RX_CTRL11 0x843b +#define MDIO_WC_REG_ETA_CL73_OUI1 0x8453 +#define MDIO_WC_REG_ETA_CL73_OUI2 0x8454 +#define MDIO_WC_REG_ETA_CL73_OUI3 0x8455 +#define MDIO_WC_REG_ETA_CL73_LD_BAM_CODE 0x8456 +#define MDIO_WC_REG_ETA_CL73_LD_UD_CODE 0x8457 #define MDIO_WC_REG_MICROBLK_CMD 0xffc2 #define MDIO_WC_REG_MICROBLK_DL_STATUS 0xffc5 #define MDIO_WC_REG_MICROBLK_CMD3 0xffcc