From: Daniel Golle Date: Tue, 15 Oct 2024 20:15:19 +0000 (+0100) Subject: generic: fix kernel version and ordering of Aquantia backports X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4d81f40d630ff3ac38ac6fadeaf815d15abe403a;p=openwrt%2Fstaging%2Fwigyori.git generic: fix kernel version and ordering of Aquantia backports Two patches declared as accepted in v6.13 were already accepted for v6.12. Fix filenames and order of patches applied. Reported-by: Mieczyslaw Nalewaj Fixes: 8cc049cec2 ("generic: phy: aquantia: move accepted patches to backport-6.6") Signed-off-by: Daniel Golle --- diff --git a/target/linux/generic/backport-6.6/837-v6.12-net-phy-aquantia-fix-setting-active_low-bit.patch b/target/linux/generic/backport-6.6/837-v6.12-net-phy-aquantia-fix-setting-active_low-bit.patch new file mode 100644 index 0000000000..6072e02fd4 --- /dev/null +++ b/target/linux/generic/backport-6.6/837-v6.12-net-phy-aquantia-fix-setting-active_low-bit.patch @@ -0,0 +1,55 @@ +From patchwork Tue Sep 17 13:49:40 2024 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 13806176 +X-Patchwork-Delegate: kuba@kernel.org +Date: Tue, 17 Sep 2024 14:49:40 +0100 +From: Daniel Golle +To: Andrew Lunn , Heiner Kallweit , + Russell King , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , Paolo Abeni , + Daniel Golle , + Christian Marangi , + Bartosz Golaszewski , + Robert Marko , + Russell King , netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Subject: [PATCH net 1/2] net: phy: aquantia: fix setting active_low bit +Message-ID: + +Precedence: bulk +X-Mailing-List: netdev@vger.kernel.org +List-Id: +List-Subscribe: +List-Unsubscribe: +MIME-Version: 1.0 +Content-Disposition: inline +X-Patchwork-Delegate: kuba@kernel.org + +phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting +in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit. +Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit. + +Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") +Signed-off-by: Daniel Golle +Reviewed-by: Russell King (Oracle) +--- + drivers/net/phy/aquantia/aquantia_leds.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/aquantia/aquantia_leds.c ++++ b/drivers/net/phy/aquantia/aquantia_leds.c +@@ -120,7 +120,8 @@ int aqr_phy_led_hw_control_set(struct ph + int aqr_phy_led_active_low_set(struct phy_device *phydev, int index, bool enable) + { + return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_DRIVE(index), +- VEND1_GLOBAL_LED_DRIVE_VDD, enable); ++ VEND1_GLOBAL_LED_DRIVE_VDD, ++ enable ? VEND1_GLOBAL_LED_DRIVE_VDD : 0); + } + + int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, unsigned long modes) diff --git a/target/linux/generic/backport-6.6/837-v6.13-net-phy-aquantia-allow-forcing-order-of-MDI-pairs.patch b/target/linux/generic/backport-6.6/837-v6.13-net-phy-aquantia-allow-forcing-order-of-MDI-pairs.patch deleted file mode 100644 index 9522bcaa45..0000000000 --- a/target/linux/generic/backport-6.6/837-v6.13-net-phy-aquantia-allow-forcing-order-of-MDI-pairs.patch +++ /dev/null @@ -1,107 +0,0 @@ -From a2e1ba275eae96a8171deb19e9c7c2f5978fee7b Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 4 Oct 2024 17:18:16 +0100 -Subject: [PATCH] net: phy: aquantia: allow forcing order of MDI pairs - -Despite supporting Auto MDI-X, it looks like Aquantia only supports -swapping pair (1,2) with pair (3,6) like it used to be for MDI-X on -100MBit/s networks. - -When all 4 pairs are in use (for 1000MBit/s or faster) the link does not -come up with pair order is not configured correctly, either using -MDI_CFG pin or using the "PMA Receive Reserved Vendor Provisioning 1" -register. - -Normally, the order of MDI pairs being either ABCD or DCBA is configured -by pulling the MDI_CFG pin. - -However, some hardware designs require overriding the value configured -by that bootstrap pin. The PHY allows doing that by setting a bit in -"PMA Receive Reserved Vendor Provisioning 1" register which allows -ignoring the state of the MDI_CFG pin and another bit configuring -whether the order of MDI pairs should be normal (ABCD) or reverse -(DCBA). Pair polarity is not affected and remains identical in both -settings. - -Introduce property "marvell,mdi-cfg-order" which allows forcing either -normal or reverse order of the MDI pairs from DT. - -If the property isn't present, the behavior is unchanged and MDI pair -order configuration is untouched (ie. either the result of MDI_CFG pin -pull-up/pull-down, or pair order override already configured by the -bootloader before Linux is started). - -Forcing normal pair order is required on the Adtran SDG-8733A Wi-Fi 7 -residential gateway. - -Signed-off-by: Daniel Golle -Reviewed-by: Andrew Lunn -Link: https://patch.msgid.link/9ed760ff87d5fc456f31e407ead548bbb754497d.1728058550.git.daniel@makrotopia.org -Signed-off-by: Jakub Kicinski ---- - drivers/net/phy/aquantia/aquantia_main.c | 33 ++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - ---- a/drivers/net/phy/aquantia/aquantia_main.c -+++ b/drivers/net/phy/aquantia/aquantia_main.c -@@ -11,6 +11,7 @@ - #include - #include - #include -+#include - #include - - #include "aquantia.h" -@@ -70,6 +71,11 @@ - #define MDIO_AN_TX_VEND_INT_MASK2 0xd401 - #define MDIO_AN_TX_VEND_INT_MASK2_LINK BIT(0) - -+#define PMAPMD_RSVD_VEND_PROV 0xe400 -+#define PMAPMD_RSVD_VEND_PROV_MDI_CONF GENMASK(1, 0) -+#define PMAPMD_RSVD_VEND_PROV_MDI_REVERSE BIT(0) -+#define PMAPMD_RSVD_VEND_PROV_MDI_FORCE BIT(1) -+ - #define MDIO_AN_RX_LP_STAT1 0xe820 - #define MDIO_AN_RX_LP_STAT1_1000BASET_FULL BIT(15) - #define MDIO_AN_RX_LP_STAT1_1000BASET_HALF BIT(14) -@@ -497,6 +503,29 @@ static int aqr107_wait_processor_intensi - return 0; - } - -+static int aqr107_config_mdi(struct phy_device *phydev) -+{ -+ struct device_node *np = phydev->mdio.dev.of_node; -+ u32 mdi_conf; -+ int ret; -+ -+ ret = of_property_read_u32(np, "marvell,mdi-cfg-order", &mdi_conf); -+ -+ /* Do nothing in case property "marvell,mdi-cfg-order" is not present */ -+ if (ret == -ENOENT) -+ return 0; -+ -+ if (ret) -+ return ret; -+ -+ if (mdi_conf & ~PMAPMD_RSVD_VEND_PROV_MDI_REVERSE) -+ return -EINVAL; -+ -+ return phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, PMAPMD_RSVD_VEND_PROV, -+ PMAPMD_RSVD_VEND_PROV_MDI_CONF, -+ mdi_conf | PMAPMD_RSVD_VEND_PROV_MDI_FORCE); -+} -+ - static int aqr107_config_init(struct phy_device *phydev) - { - struct aqr107_priv *priv = phydev->priv; -@@ -535,6 +564,10 @@ static int aqr107_config_init(struct phy - if (ret) - return ret; - -+ ret = aqr107_config_mdi(phydev); -+ if (ret) -+ return ret; -+ - /* Restore LED polarity state after reset */ - for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) { - ret = aqr_phy_led_active_low_set(phydev, index, led_active_low); diff --git a/target/linux/generic/backport-6.6/838-v6.12-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch b/target/linux/generic/backport-6.6/838-v6.12-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch new file mode 100644 index 0000000000..5c3494ae33 --- /dev/null +++ b/target/linux/generic/backport-6.6/838-v6.12-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch @@ -0,0 +1,72 @@ +From patchwork Tue Sep 17 13:49:55 2024 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 13806177 +X-Patchwork-Delegate: kuba@kernel.org +Date: Tue, 17 Sep 2024 14:49:55 +0100 +From: Daniel Golle +To: Andrew Lunn , Heiner Kallweit , + Russell King , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , Paolo Abeni , + Daniel Golle , + Christian Marangi , + Bartosz Golaszewski , + Robert Marko , + Russell King , netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Subject: [PATCH net 2/2] net: phy: aquantia: fix applying active_low bit + after reset +Message-ID: + <9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org> +References: + +Precedence: bulk +X-Mailing-List: netdev@vger.kernel.org +List-Id: +List-Subscribe: +List-Unsubscribe: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: + +X-Patchwork-Delegate: kuba@kernel.org + +for_each_set_bit was used wrongly in aqr107_config_init() when iterating +over LEDs. Drop misleading 'index' variable and call +aqr_phy_led_active_low_set() for each set bit representing an LED which +is driven by VDD instead of GND pin. + +Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") +Signed-off-by: Daniel Golle +Reviewed-by: Russell King (Oracle) +--- + drivers/net/phy/aquantia/aquantia_main.c | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/aquantia/aquantia_main.c ++++ b/drivers/net/phy/aquantia/aquantia_main.c +@@ -501,7 +501,7 @@ static int aqr107_config_init(struct phy + { + struct aqr107_priv *priv = phydev->priv; + u32 led_active_low; +- int ret, index = 0; ++ int ret; + + /* Check that the PHY interface type is compatible */ + if (phydev->interface != PHY_INTERFACE_MODE_SGMII && +@@ -537,10 +537,9 @@ static int aqr107_config_init(struct phy + + /* Restore LED polarity state after reset */ + for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) { +- ret = aqr_phy_led_active_low_set(phydev, index, led_active_low); ++ ret = aqr_phy_led_active_low_set(phydev, led_active_low, true); + if (ret) + return ret; +- index++; + } + + return 0; diff --git a/target/linux/generic/backport-6.6/838-v6.13-net-phy-aquantia-fix-return-value-check-in-aqr107_co.patch b/target/linux/generic/backport-6.6/838-v6.13-net-phy-aquantia-fix-return-value-check-in-aqr107_co.patch deleted file mode 100644 index 73be78a058..0000000000 --- a/target/linux/generic/backport-6.6/838-v6.13-net-phy-aquantia-fix-return-value-check-in-aqr107_co.patch +++ /dev/null @@ -1,31 +0,0 @@ -From ce21b8fb255ebf0b49913fb4c62741d7eb05c6f6 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 11 Oct 2024 22:28:43 +0100 -Subject: [PATCH] net: phy: aquantia: fix return value check in - aqr107_config_mdi() - -of_property_read_u32() returns -EINVAL in case the property cannot be -found rather than -ENOENT. Fix the check to not abort probing in case -of the property being missing, and also in case CONFIG_OF is not set -which will result in -ENOSYS. - -Fixes: a2e1ba275eae ("net: phy: aquantia: allow forcing order of MDI pairs") -Reported-by: Jon Hunter -Closes: https://lore.kernel.org/all/114b4c03-5d16-42ed-945d-cf78eabea12b@nvidia.com/ -Suggested-by: Hans-Frieder Vogt -Signed-off-by: Daniel Golle ---- - drivers/net/phy/aquantia/aquantia_main.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/phy/aquantia/aquantia_main.c -+++ b/drivers/net/phy/aquantia/aquantia_main.c -@@ -512,7 +512,7 @@ static int aqr107_config_mdi(struct phy_ - ret = of_property_read_u32(np, "marvell,mdi-cfg-order", &mdi_conf); - - /* Do nothing in case property "marvell,mdi-cfg-order" is not present */ -- if (ret == -ENOENT) -+ if (ret == -EINVAL || ret == -ENOSYS) - return 0; - - if (ret) diff --git a/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-allow-forcing-order-of-MDI-pairs.patch b/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-allow-forcing-order-of-MDI-pairs.patch new file mode 100644 index 0000000000..c1655ce71e --- /dev/null +++ b/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-allow-forcing-order-of-MDI-pairs.patch @@ -0,0 +1,107 @@ +From a2e1ba275eae96a8171deb19e9c7c2f5978fee7b Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Fri, 4 Oct 2024 17:18:16 +0100 +Subject: [PATCH] net: phy: aquantia: allow forcing order of MDI pairs + +Despite supporting Auto MDI-X, it looks like Aquantia only supports +swapping pair (1,2) with pair (3,6) like it used to be for MDI-X on +100MBit/s networks. + +When all 4 pairs are in use (for 1000MBit/s or faster) the link does not +come up with pair order is not configured correctly, either using +MDI_CFG pin or using the "PMA Receive Reserved Vendor Provisioning 1" +register. + +Normally, the order of MDI pairs being either ABCD or DCBA is configured +by pulling the MDI_CFG pin. + +However, some hardware designs require overriding the value configured +by that bootstrap pin. The PHY allows doing that by setting a bit in +"PMA Receive Reserved Vendor Provisioning 1" register which allows +ignoring the state of the MDI_CFG pin and another bit configuring +whether the order of MDI pairs should be normal (ABCD) or reverse +(DCBA). Pair polarity is not affected and remains identical in both +settings. + +Introduce property "marvell,mdi-cfg-order" which allows forcing either +normal or reverse order of the MDI pairs from DT. + +If the property isn't present, the behavior is unchanged and MDI pair +order configuration is untouched (ie. either the result of MDI_CFG pin +pull-up/pull-down, or pair order override already configured by the +bootloader before Linux is started). + +Forcing normal pair order is required on the Adtran SDG-8733A Wi-Fi 7 +residential gateway. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Link: https://patch.msgid.link/9ed760ff87d5fc456f31e407ead548bbb754497d.1728058550.git.daniel@makrotopia.org +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/aquantia/aquantia_main.c | 33 ++++++++++++++++++++++++ + 1 file changed, 33 insertions(+) + +--- a/drivers/net/phy/aquantia/aquantia_main.c ++++ b/drivers/net/phy/aquantia/aquantia_main.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + + #include "aquantia.h" +@@ -70,6 +71,11 @@ + #define MDIO_AN_TX_VEND_INT_MASK2 0xd401 + #define MDIO_AN_TX_VEND_INT_MASK2_LINK BIT(0) + ++#define PMAPMD_RSVD_VEND_PROV 0xe400 ++#define PMAPMD_RSVD_VEND_PROV_MDI_CONF GENMASK(1, 0) ++#define PMAPMD_RSVD_VEND_PROV_MDI_REVERSE BIT(0) ++#define PMAPMD_RSVD_VEND_PROV_MDI_FORCE BIT(1) ++ + #define MDIO_AN_RX_LP_STAT1 0xe820 + #define MDIO_AN_RX_LP_STAT1_1000BASET_FULL BIT(15) + #define MDIO_AN_RX_LP_STAT1_1000BASET_HALF BIT(14) +@@ -497,6 +503,29 @@ static int aqr107_wait_processor_intensi + return 0; + } + ++static int aqr107_config_mdi(struct phy_device *phydev) ++{ ++ struct device_node *np = phydev->mdio.dev.of_node; ++ u32 mdi_conf; ++ int ret; ++ ++ ret = of_property_read_u32(np, "marvell,mdi-cfg-order", &mdi_conf); ++ ++ /* Do nothing in case property "marvell,mdi-cfg-order" is not present */ ++ if (ret == -ENOENT) ++ return 0; ++ ++ if (ret) ++ return ret; ++ ++ if (mdi_conf & ~PMAPMD_RSVD_VEND_PROV_MDI_REVERSE) ++ return -EINVAL; ++ ++ return phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, PMAPMD_RSVD_VEND_PROV, ++ PMAPMD_RSVD_VEND_PROV_MDI_CONF, ++ mdi_conf | PMAPMD_RSVD_VEND_PROV_MDI_FORCE); ++} ++ + static int aqr107_config_init(struct phy_device *phydev) + { + struct aqr107_priv *priv = phydev->priv; +@@ -535,6 +564,10 @@ static int aqr107_config_init(struct phy + if (ret) + return ret; + ++ ret = aqr107_config_mdi(phydev); ++ if (ret) ++ return ret; ++ + /* Restore LED polarity state after reset */ + for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) { + ret = aqr_phy_led_active_low_set(phydev, led_active_low, true); diff --git a/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-fix-setting-active_low-bit.patch b/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-fix-setting-active_low-bit.patch deleted file mode 100644 index 6072e02fd4..0000000000 --- a/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-fix-setting-active_low-bit.patch +++ /dev/null @@ -1,55 +0,0 @@ -From patchwork Tue Sep 17 13:49:40 2024 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Daniel Golle -X-Patchwork-Id: 13806176 -X-Patchwork-Delegate: kuba@kernel.org -Date: Tue, 17 Sep 2024 14:49:40 +0100 -From: Daniel Golle -To: Andrew Lunn , Heiner Kallweit , - Russell King , - "David S. Miller" , - Eric Dumazet , - Jakub Kicinski , Paolo Abeni , - Daniel Golle , - Christian Marangi , - Bartosz Golaszewski , - Robert Marko , - Russell King , netdev@vger.kernel.org, - linux-kernel@vger.kernel.org -Subject: [PATCH net 1/2] net: phy: aquantia: fix setting active_low bit -Message-ID: - -Precedence: bulk -X-Mailing-List: netdev@vger.kernel.org -List-Id: -List-Subscribe: -List-Unsubscribe: -MIME-Version: 1.0 -Content-Disposition: inline -X-Patchwork-Delegate: kuba@kernel.org - -phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting -in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit. -Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit. - -Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") -Signed-off-by: Daniel Golle -Reviewed-by: Russell King (Oracle) ---- - drivers/net/phy/aquantia/aquantia_leds.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/phy/aquantia/aquantia_leds.c -+++ b/drivers/net/phy/aquantia/aquantia_leds.c -@@ -120,7 +120,8 @@ int aqr_phy_led_hw_control_set(struct ph - int aqr_phy_led_active_low_set(struct phy_device *phydev, int index, bool enable) - { - return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_DRIVE(index), -- VEND1_GLOBAL_LED_DRIVE_VDD, enable); -+ VEND1_GLOBAL_LED_DRIVE_VDD, -+ enable ? VEND1_GLOBAL_LED_DRIVE_VDD : 0); - } - - int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, unsigned long modes) diff --git a/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch b/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch deleted file mode 100644 index 6d71b3d7a5..0000000000 --- a/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch +++ /dev/null @@ -1,72 +0,0 @@ -From patchwork Tue Sep 17 13:49:55 2024 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Daniel Golle -X-Patchwork-Id: 13806177 -X-Patchwork-Delegate: kuba@kernel.org -Date: Tue, 17 Sep 2024 14:49:55 +0100 -From: Daniel Golle -To: Andrew Lunn , Heiner Kallweit , - Russell King , - "David S. Miller" , - Eric Dumazet , - Jakub Kicinski , Paolo Abeni , - Daniel Golle , - Christian Marangi , - Bartosz Golaszewski , - Robert Marko , - Russell King , netdev@vger.kernel.org, - linux-kernel@vger.kernel.org -Subject: [PATCH net 2/2] net: phy: aquantia: fix applying active_low bit - after reset -Message-ID: - <9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org> -References: - -Precedence: bulk -X-Mailing-List: netdev@vger.kernel.org -List-Id: -List-Subscribe: -List-Unsubscribe: -MIME-Version: 1.0 -Content-Disposition: inline -In-Reply-To: - -X-Patchwork-Delegate: kuba@kernel.org - -for_each_set_bit was used wrongly in aqr107_config_init() when iterating -over LEDs. Drop misleading 'index' variable and call -aqr_phy_led_active_low_set() for each set bit representing an LED which -is driven by VDD instead of GND pin. - -Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") -Signed-off-by: Daniel Golle -Reviewed-by: Russell King (Oracle) ---- - drivers/net/phy/aquantia/aquantia_main.c | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/aquantia/aquantia_main.c -+++ b/drivers/net/phy/aquantia/aquantia_main.c -@@ -530,7 +530,7 @@ static int aqr107_config_init(struct phy - { - struct aqr107_priv *priv = phydev->priv; - u32 led_active_low; -- int ret, index = 0; -+ int ret; - - /* Check that the PHY interface type is compatible */ - if (phydev->interface != PHY_INTERFACE_MODE_SGMII && -@@ -570,10 +570,9 @@ static int aqr107_config_init(struct phy - - /* Restore LED polarity state after reset */ - for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) { -- ret = aqr_phy_led_active_low_set(phydev, index, led_active_low); -+ ret = aqr_phy_led_active_low_set(phydev, led_active_low, true); - if (ret) - return ret; -- index++; - } - - return 0; diff --git a/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-return-value-check-in-aqr107_co.patch b/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-return-value-check-in-aqr107_co.patch new file mode 100644 index 0000000000..73be78a058 --- /dev/null +++ b/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-return-value-check-in-aqr107_co.patch @@ -0,0 +1,31 @@ +From ce21b8fb255ebf0b49913fb4c62741d7eb05c6f6 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Fri, 11 Oct 2024 22:28:43 +0100 +Subject: [PATCH] net: phy: aquantia: fix return value check in + aqr107_config_mdi() + +of_property_read_u32() returns -EINVAL in case the property cannot be +found rather than -ENOENT. Fix the check to not abort probing in case +of the property being missing, and also in case CONFIG_OF is not set +which will result in -ENOSYS. + +Fixes: a2e1ba275eae ("net: phy: aquantia: allow forcing order of MDI pairs") +Reported-by: Jon Hunter +Closes: https://lore.kernel.org/all/114b4c03-5d16-42ed-945d-cf78eabea12b@nvidia.com/ +Suggested-by: Hans-Frieder Vogt +Signed-off-by: Daniel Golle +--- + drivers/net/phy/aquantia/aquantia_main.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/phy/aquantia/aquantia_main.c ++++ b/drivers/net/phy/aquantia/aquantia_main.c +@@ -512,7 +512,7 @@ static int aqr107_config_mdi(struct phy_ + ret = of_property_read_u32(np, "marvell,mdi-cfg-order", &mdi_conf); + + /* Do nothing in case property "marvell,mdi-cfg-order" is not present */ +- if (ret == -ENOENT) ++ if (ret == -EINVAL || ret == -ENOSYS) + return 0; + + if (ret)