From: Thomas Petazzoni Date: Tue, 8 Jul 2014 08:49:43 +0000 (+0200) Subject: net: mvneta: fix operation in 10 Mbit/s mode X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4d12bc63ab5e48c1d78fa13883cf6fefcea3afb1;p=openwrt%2Fstaging%2Fblogic.git net: mvneta: fix operation in 10 Mbit/s mode As reported by Maggie Mae Roxas, the mvneta driver doesn't behave properly in 10 Mbit/s mode. This is due to a misconfiguration of the MVNETA_GMAC_AUTONEG_CONFIG register: bit MVNETA_GMAC_CONFIG_MII_SPEED must be set for a 100 Mbit/s speed, but cleared for a 10 Mbit/s speed, which the driver was not properly doing. This commit adjusts that by setting the MVNETA_GMAC_CONFIG_MII_SPEED bit only in 100 Mbit/s mode, and relying on the fact that all the speed related bits of this register are cleared at the beginning of the mvneta_adjust_link() function. This problem exists since c5aff18204da0 ("net: mvneta: driver for Marvell Armada 370/XP network unit") which is the commit that introduced the mvneta driver in the kernel. Cc: # v3.8+ Fixes: c5aff18204da0 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Reported-by: Maggie Mae Roxas Cc: Maggie Mae Roxas Signed-off-by: Thomas Petazzoni Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 45beca17fa50..d49f08d22071 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2529,7 +2529,7 @@ static void mvneta_adjust_link(struct net_device *ndev) if (phydev->speed == SPEED_1000) val |= MVNETA_GMAC_CONFIG_GMII_SPEED; - else + else if (phydev->speed == SPEED_100) val |= MVNETA_GMAC_CONFIG_MII_SPEED; mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);