From: Felix Fietkau Date: Sun, 13 Apr 2014 09:53:51 +0000 (+0000) Subject: iw: sync nl80211.h (fixes settting antenna_gain) X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4d0f5b36c46c9e4c35a2460e48910c683e2b5ba4;p=openwrt%2Fstaging%2Fdedeckeh.git iw: sync nl80211.h (fixes settting antenna_gain) Signed-off-by: Felix Fietkau SVN-Revision: 40503 --- diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 215c740dd7..cbae38abcb 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,25 +1,119 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -1555,6 +1555,9 @@ enum nl80211_commands { +@@ -303,8 +303,9 @@ + * passed, all channels allowed for the current regulatory domain + * are used. Extra IEs can also be passed from the userspace by + * using the %NL80211_ATTR_IE attribute. +- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT +- * if scheduled scan is not running. ++ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if ++ * scheduled scan is not running. The caller may assume that as soon ++ * as the call returns, it is safe to start a new scheduled scan again. + * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan + * results available. + * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has +@@ -418,8 +419,18 @@ + * %NL80211_ATTR_SSID attribute, and can optionally specify the association + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, +- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and +- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. ++ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, ++ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and ++ * %NL80211_ATTR_WIPHY_FREQ_HINT. ++ * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are ++ * restrictions on BSS selection, i.e., they effectively prevent roaming ++ * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT ++ * can be included to provide a recommendation of the initial BSS while ++ * allowing the driver to roam to other BSSes within the ESS and also to ++ * ignore this recommendation if the indicated BSS is not ideal. Only one ++ * set of BSSID,frequency parameters is used (i.e., either the enforcing ++ * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict ++ * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). + * Background scan period can optionally be + * specified in %NL80211_ATTR_BG_SCAN_PERIOD, + * if not specified default background scan configuration +@@ -1555,6 +1566,22 @@ enum nl80211_commands { * data is in the format defined for the payload of the QoS Map Set element * in IEEE Std 802.11-2012, 8.4.2.97. * ++ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS ++ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS ++ * ++ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many ++ * associated stations are supported in AP mode (including P2P GO); u32. ++ * Since drivers may not have a fixed limit on the maximum number (e.g., ++ * other concurrent operations may affect this), drivers are allowed to ++ * advertise values that cannot always be met. In such cases, an attempt ++ * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. ++ * ++ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. ++ * As specified in the &enum nl80211_tdls_peer_capability. ++ * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ -@@ -1883,6 +1886,8 @@ enum nl80211_attrs { +@@ -1883,6 +1910,15 @@ enum nl80211_attrs { NL80211_ATTR_QOS_MAP, ++ NL80211_ATTR_MAC_HINT, ++ NL80211_ATTR_WIPHY_FREQ_HINT, ++ ++ NL80211_ATTR_MAX_AP_ASSOC_STA, ++ ++ NL80211_ATTR_TDLS_PEER_CAPABILITY, ++ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -2442,9 +2447,15 @@ enum nl80211_reg_rule_attr { +@@ -2304,6 +2340,7 @@ enum nl80211_band_attr { + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible ++ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use +@@ -2322,6 +2359,7 @@ enum nl80211_frequency_attr { + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, ++ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, +@@ -2412,12 +2450,14 @@ enum nl80211_reg_type { + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this +- * frequency range, in KHz. ++ * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). ++ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. ++ * If not present or 0 default CAC time will be used. + * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number + * currently defined + * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use +@@ -2433,6 +2473,8 @@ enum nl80211_reg_rule_attr { + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + ++ NL80211_ATTR_DFS_CAC_TIME, ++ + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +@@ -2442,9 +2484,15 @@ enum nl80211_reg_rule_attr { * enum nl80211_sched_scan_match_attr - scheduled scan match attributes * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, @@ -37,3 +131,92 @@ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use +@@ -2477,6 +2525,9 @@ enum nl80211_sched_scan_match_attr { + * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, + * this includes probe requests or modes of operation that require + * beaconing. ++ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated ++ * base on contiguous rules and wider channels will be allowed to cross ++ * multiple contiguous/overlapping frequency ranges. + */ + enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, +@@ -2488,6 +2539,7 @@ enum nl80211_reg_rule_flags { + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_NO_IR = 1<<7, + __NL80211_RRF_NO_IBSS = 1<<8, ++ NL80211_RRF_AUTO_BW = 1<<11, + }; + + #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR +@@ -3131,6 +3183,7 @@ enum nl80211_key_attributes { + * in an array of MCS numbers. + * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_vht ++ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi + * @__NL80211_TXRATE_AFTER_LAST: internal + * @NL80211_TXRATE_MAX: highest TX rate attribute + */ +@@ -3139,6 +3192,7 @@ enum nl80211_tx_rate_attributes { + NL80211_TXRATE_LEGACY, + NL80211_TXRATE_HT, + NL80211_TXRATE_VHT, ++ NL80211_TXRATE_GI, + + /* keep last */ + __NL80211_TXRATE_AFTER_LAST, +@@ -3156,6 +3210,12 @@ struct nl80211_txrate_vht { + __u16 mcs[NL80211_VHT_NSS_MAX]; + }; + ++enum nl80211_txrate_gi { ++ NL80211_TXRATE_DEFAULT_GI, ++ NL80211_TXRATE_FORCE_SGI, ++ NL80211_TXRATE_FORCE_LGI, ++}; ++ + /** + * enum nl80211_band - Frequency band + * @NL80211_BAND_2GHZ: 2.4 GHz ISM band +@@ -3801,11 +3861,6 @@ enum nl80211_ap_sme_features { + * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested + * to work properly to suppport receiving regulatory hints from + * cellular base stations. +- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active +- * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel +- * in the interface combinations, even when it's only used for scan +- * and remain-on-channel. This could be due to, for example, the +- * remain-on-channel implementation requiring a channel context. + * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of + * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station + * mode +@@ -3847,7 +3902,7 @@ enum nl80211_feature_flags { + NL80211_FEATURE_HT_IBSS = 1 << 1, + NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, +- NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, ++ /* bit 4 is reserved - don't use */ + NL80211_FEATURE_SAE = 1 << 5, + NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, + NL80211_FEATURE_SCAN_FLUSH = 1 << 7, +@@ -4037,4 +4092,20 @@ struct nl80211_vendor_cmd_info { + __u32 subcmd; + }; + ++/** ++ * enum nl80211_tdls_peer_capability - TDLS peer flags. ++ * ++ * Used by tdls_mgmt() to determine which conditional elements need ++ * to be added to TDLS Setup frames. ++ * ++ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. ++ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. ++ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. ++ */ ++enum nl80211_tdls_peer_capability { ++ NL80211_TDLS_PEER_HT = 1<<0, ++ NL80211_TDLS_PEER_VHT = 1<<1, ++ NL80211_TDLS_PEER_WMM = 1<<2, ++}; ++ + #endif /* __LINUX_NL80211_H */