From: David Santamaría Rogado Date: Fri, 18 Jan 2019 21:28:41 +0000 (+0100) Subject: ar71xx: use correct wan mac address for the TP-Link Archer C7 v4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4bcf58135210736f2a1603609d2a76b3e188e2ad;p=openwrt%2Fstaging%2Fblogic.git ar71xx: use correct wan mac address for the TP-Link Archer C7 v4 The correct MAC address for this device is lan_mac +1, there is no need to set lan_mac so use base_mac variable instead lan_mac. Based on this PR for ath79: https://github.com/openwrt/openwrt/pull/1726 Signed-off-by: David Santamaría Rogado [fix alphabetical ordering, reword subject] Signed-off-by: Jo-Philipp Wich --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 7f209fbcac2a..ef8389666447 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -589,6 +589,10 @@ ar71xx_setup_macs() local wan_mac="" case $board in + archer-c7-v4) + base_mac=$(mtd_get_mac_binary config 8) + wan_mac=$(macaddr_add "$base_mac" 1) + ;; dgl-5500-a1|\ dir-825-c1) wan_mac=$(mtd_get_mac_ascii nvram "wan_mac") @@ -600,6 +604,13 @@ ar71xx_setup_macs() lan_mac=$(mtd_get_mac_binary caldata 0) wan_mac=$(mtd_get_mac_binary caldata 6) ;; + dir-869-a1|\ + mynet-n750) + wan_mac=$(mtd_get_mac_ascii devdata "wanmac") + ;; + esr900) + wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr") + ;; fritz300e) lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) ;; @@ -608,13 +619,6 @@ ar71xx_setup_macs() lan_mac=$(mtd_get_mac_binary product-info 8) wan_mac=$(macaddr_add "$lan_mac" 1) ;; - esr900) - wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr") - ;; - dir-869-a1|\ - mynet-n750) - wan_mac=$(mtd_get_mac_ascii devdata "wanmac") - ;; wlr8100) lan_mac=$(mtd_get_mac_ascii u-boot-env "ethaddr") wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")