From: Florian Fainelli Date: Sat, 26 Jul 2008 18:49:26 +0000 (+0000) Subject: Remove 2.6.23 files, we will stick to 2.6.24 for rdc X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4bc51e20f21baaee23731f804b35d65937c6e19f;p=openwrt%2Fstaging%2Fnbd.git Remove 2.6.23 files, we will stick to 2.6.24 for rdc SVN-Revision: 11944 --- diff --git a/target/linux/rdc/config-2.6.23 b/target/linux/rdc/config-2.6.23 deleted file mode 100644 index c8f4a36ac8..0000000000 --- a/target/linux/rdc/config-2.6.23 +++ /dev/null @@ -1,309 +0,0 @@ -# CONFIG_60XX_WDT is not set -# CONFIG_8139TOO is not set -# CONFIG_ACQUIRE_WDT is not set -# CONFIG_ADVANTECH_WDT is not set -# CONFIG_AGP is not set -# CONFIG_ALIM1535_WDT is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ATA=m -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_ATA_PIIX=m -CONFIG_BASE_SMALL=0 -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV_HD is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDE=m -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_BOUNCE=y -# CONFIG_BROADCOM_PHY is not set -CONFIG_CLOCKSOURCE_WATCHDOG=y -# CONFIG_COMPAT_VDSO is not set -# CONFIG_CPU5_WDT is not set -# CONFIG_CPU_FREQ is not set -CONFIG_CRYPTO_AES_586=m -CONFIG_CRYPTO_TWOFISH_586=m -# CONFIG_CS5535_GPIO is not set -# CONFIG_DCDBAS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_DELL_RBU is not set -CONFIG_DEVPORT=y -CONFIG_DMI=y -CONFIG_DMIID=y -CONFIG_DOUBLEFAULT=y -# CONFIG_E100 is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_EDAC is not set -# CONFIG_EDD is not set -# CONFIG_EUROTECH_WDT is not set -# CONFIG_FIXED_PHY is not set -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_ISA_DMA=y -# CONFIG_GEN_RTC is not set -# CONFIG_HANGCHECK_TIMER is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -CONFIG_HID=m -CONFIG_HID_SUPPORT=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HIGH_RES_TIMERS is not set -# CONFIG_HPET_TIMER is not set -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_AMD is not set -# CONFIG_HW_RANDOM_GEODE is not set -# CONFIG_HW_RANDOM_INTEL is not set -# CONFIG_HW_RANDOM_VIA is not set -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_I2C=m -# CONFIG_I2C_ALGOBIT is not set -CONFIG_I2C_BOARDINFO=y -# CONFIG_I6300ESB_WDT is not set -# CONFIG_I8K is not set -# CONFIG_IB700_WDT is not set -# CONFIG_IBMASR is not set -# CONFIG_IBM_ASM is not set -CONFIG_ICPLUS_PHY=y -CONFIG_IDE=m -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_YEALINK=m -CONFIG_INSTRUMENTATION=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_ISA is not set -CONFIG_ISA_DMA_API=y -# CONFIG_ITCO_WDT is not set -CONFIG_JFS_FS=m -CONFIG_KEXEC=y -CONFIG_KTIME_SCALAR=y -# CONFIG_KVM is not set -CONFIG_LBD=y -CONFIG_LEDS_GPIO=y -CONFIG_LSF=y -# CONFIG_M386 is not set -CONFIG_M486=y -# CONFIG_M586 is not set -# CONFIG_M586MMX is not set -# CONFIG_M586TSC is not set -# CONFIG_M686 is not set -# CONFIG_MACHZ_WDT is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_MATH_EMULATION=y -# CONFIG_MCA is not set -# CONFIG_MCORE2 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MICROCODE is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_NETSC520 is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_PNC2000 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_RDC3210=y -CONFIG_MTD_RDC3210_ALLOW_JFFS2=y -CONFIG_MTD_RDC3210_BUSWIDTH=2 -# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set -CONFIG_MTD_RDC3210_SIZE=0x400000 -# CONFIG_MTD_RDC3210_STATIC_MAP is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SC520CDP is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_TS5500 is not set -# CONFIG_MTRR is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_NET_VENDOR_3COM is not set -CONFIG_NLS_ISO8859_2=m -CONFIG_NOHIGHMEM=y -# CONFIG_NO_HZ is not set -CONFIG_NR_QUICK=1 -# CONFIG_NSC_GPIO is not set -CONFIG_NVRAM=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARAVIRT is not set -CONFIG_PATA_ARTOP=m -# CONFIG_PC8736x_GPIO is not set -# CONFIG_PC87413_WDT is not set -CONFIG_PCCARD=m -CONFIG_PCCARD_NONSTATIC=m -# CONFIG_PCIEPORTBUS is not set -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_GOANY=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -# CONFIG_PCI_GOMMCONFIG is not set -CONFIG_PCMCIA=m -CONFIG_PHYLIB=y -CONFIG_PHYSICAL_ALIGN=0x100000 -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_QSEMI_PHY is not set -CONFIG_QUICKLIST=y -CONFIG_R6040=m -# CONFIG_R6040_NAPI is not set -# CONFIG_RELOCATABLE is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_SBC8360_WDT is not set -# CONFIG_SBC_EPX_C3_WATCHDOG is not set -# CONFIG_SC1200_WDT is not set -# CONFIG_SC520_WDT is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SCx200 is not set -# CONFIG_SCx200_ACB is not set -CONFIG_SEMAPHORE_SLEEPERS=y -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SMP is not set -# CONFIG_SMSC37B787_WDT is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SND_CS5530 is not set -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SONYPI is not set -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_TELCLOCK is not set -# CONFIG_TICK_ONESHOT is not set -# CONFIG_TOSHIBA is not set -CONFIG_UID16=y -# CONFIG_USBPCWATCHDOG is not set -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USER_NS is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_VIDEO_CAPTURE_DRIVERS=y -CONFIG_VIDEO_CPIA2=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIRTUALIZATION=y -# CONFIG_VM86 is not set -# CONFIG_VMSPLIT_1G is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_2G_OPT is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_WAFER_WDT is not set -CONFIG_X86=y -CONFIG_X86_32=y -CONFIG_X86_ALIGNMENT_16=y -# CONFIG_X86_BIGSMP is not set -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_BSWAP=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_CPUID=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_ES7000 is not set -CONFIG_X86_F00F_BUG=y -# CONFIG_X86_GENERIC is not set -# CONFIG_X86_GENERICARCH is not set -CONFIG_X86_INVLPG=y -CONFIG_X86_L1_CACHE_SHIFT=4 -# CONFIG_X86_MCE is not set -CONFIG_X86_MINIMUM_CPU_FAMILY=4 -CONFIG_X86_MSR=y -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_PAE is not set -# CONFIG_X86_PC is not set -CONFIG_X86_POPAD_OK=y -CONFIG_X86_PPRO_FENCE=y -CONFIG_X86_RDC=y -CONFIG_X86_REBOOTFIXUPS=y -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_VISWS is not set -# CONFIG_X86_VOYAGER is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_XADD=y diff --git a/target/linux/rdc/patches-2.6.23/001-rdc3210_flash_map.patch b/target/linux/rdc/patches-2.6.23/001-rdc3210_flash_map.patch deleted file mode 100644 index 0c407a114a..0000000000 --- a/target/linux/rdc/patches-2.6.23/001-rdc3210_flash_map.patch +++ /dev/null @@ -1,65 +0,0 @@ -diff -urN linux-2.6.17/drivers/mtd/maps/Kconfig linux-2.6.17.new/drivers/mtd/maps/Kconfig ---- linux-2.6.17/drivers/mtd/maps/Kconfig 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17.new/drivers/mtd/maps/Kconfig 2006-09-24 20:28:11.000000000 +0200 -@@ -76,6 +76,50 @@ - PNC-2000 is the name of Network Camera product from PHOTRON - Ltd. in Japan. It uses CFI-compliant flash. - -+config MTD_RDC3210 -+ tristate "CFI Flash device mapped on RDC3210" -+ depends on X86 && MTD_CFI && MTD_PARTITIONS -+ help -+ RDC-3210 is the flash device we find on Ralink reference board. -+ -+config MTD_RDC3210_STATIC_MAP -+ bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210 -+ select MTD_RDC3210_FACTORY_PRESENT -+ help -+ The mapping driver will use the static partition map for the -+ RDC-3210 flash device. -+ -+config MTD_RDC3210_FACTORY_PRESENT -+ bool "Reserve a partition on RDC3210 for factory presets" -+ depends on MTD_RDC3210 -+ default y -+ help -+ The mapping driver will reserve a partition on the RDC-3210 flash -+ device for resetting flash contents to factory defaults. -+ -+config MTD_RDC3210_ALLOW_JFFS2 -+ bool "JFFS2 filesystem usable in a partition on RDC3210" -+ depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP -+ help -+ The mapping driver will align a partition on the RDC-3210 flash -+ device to an erase-block boundary so that a JFFS2 filesystem may -+ reside on it. -+ -+config MTD_RDC3210_SIZE -+ hex "Amount of flash memory on RDC3210" -+ depends on MTD_RDC3210 -+ default "0x400000" -+ help -+ Total size in bytes of the RDC-3210 flash device -+ -+config MTD_RDC3210_BUSWIDTH -+ int "Width of CFI Flash device mapped on RDC3210" -+ depends on MTD_RDC3210 -+ default "2" -+ help -+ Number of bytes addressed on the RDC-3210 flash device before -+ addressing the same chip again -+ - config MTD_SC520CDP - tristate "CFI Flash device mapped on AMD SC520 CDP" - depends on X86 && MTD_CFI && MTD_CONCAT -diff -urN linux-2.6.17/drivers/mtd/maps/Makefile linux-2.6.17.new/drivers/mtd/maps/Makefile ---- linux-2.6.17/drivers/mtd/maps/Makefile 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17.new/drivers/mtd/maps/Makefile 2006-09-24 20:26:10.000000000 +0200 -@@ -28,6 +28,7 @@ - obj-$(CONFIG_MTD_PHYSMAP) += physmap.o - obj-$(CONFIG_MTD_PNC2000) += pnc2000.o - obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o -+obj-$(CONFIG_MTD_RDC3210) += rdc3210.o - obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o - obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o - obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o diff --git a/target/linux/rdc/patches-2.6.23/001-x86_generic_gpio.patch b/target/linux/rdc/patches-2.6.23/001-x86_generic_gpio.patch deleted file mode 100644 index db3d866a1b..0000000000 --- a/target/linux/rdc/patches-2.6.23/001-x86_generic_gpio.patch +++ /dev/null @@ -1,15 +0,0 @@ -diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig -index 97b64d7..f8c1d32 100644 ---- a/arch/i386/Kconfig -+++ b/arch/i386/Kconfig -@@ -79,6 +79,10 @@ config GENERIC_BUG - default y - depends on BUG - -+config GENERIC_GPIO -+ bool -+ default n -+ - config GENERIC_HWEIGHT - bool - default y diff --git a/target/linux/rdc/patches-2.6.23/002-r6040_ethernet.patch b/target/linux/rdc/patches-2.6.23/002-r6040_ethernet.patch deleted file mode 100644 index 8ff6af1c7e..0000000000 --- a/target/linux/rdc/patches-2.6.23/002-r6040_ethernet.patch +++ /dev/null @@ -1,1090 +0,0 @@ -diff -urN linux-2.6.17/drivers/net/Kconfig linux-2.6.17.new/drivers/net/Kconfig ---- linux-2.6.17/drivers/net/Kconfig 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17.new/drivers/net/Kconfig 2006-09-25 13:14:27.000000000 +0200 -@@ -1358,6 +1358,24 @@ - . The module will be - called apricot. - -+config R6040 -+ tristate "RDC Fast-Ethernet support (EXPERIMENTAL)" -+ depends on NET_PCI && EXPERIMENTAL -+ select MII -+ help -+ If you have a network (Ethernet) controller of this type, say Y and -+ read the Ethernet-HOWTO, available from -+ . -+ -+ To compile this driver as a module, choose M here and read -+ . The module will be -+ called r6040. -+ -+ -+config R6040_NAPI -+ bool "NAPI support for R6040" -+ depends on R6040 -+ default y - config B44 - tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)" - depends on NET_PCI && PCI && EXPERIMENTAL -diff -urN linux-2.6.17/drivers/net/Makefile linux-2.6.17.new/drivers/net/Makefile ---- linux-2.6.17/drivers/net/Makefile 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17.new/drivers/net/Makefile 2006-09-25 13:14:45.000000000 +0200 -@@ -106,6 +106,7 @@ - obj-$(CONFIG_NE3210) += ne3210.o 8390.o - obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o - obj-$(CONFIG_B44) += b44.o -+obj-$(CONFIG_R6040) += r6040.o - obj-$(CONFIG_FORCEDETH) += forcedeth.o - obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o -diff -urN linux-2.6.23/drivers/net/r6040.c linux-2.6.23.new/drivers/net/r6040.c ---- linux-2.6.23/drivers/net/r6040.c 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.23.new/drivers/net/r6040.c 2006-09-25 13:14:45.000000000 +0200 -@@ -0,0 +1,1048 @@ -+/* r6040.c: A RDC R6040 FastEthernet driver for linux. */ -+/* -+ Re-written 2004 by Sten Wang. -+ -+ Copyright 1994-2000 by Donald Becker. -+ Copyright 1993 United States Government as represented by the -+ Director, National Security Agency. This software may be used and -+ distributed according to the terms of the GNU General Public License, -+ incorporated herein by reference. -+ -+ This driver is for RDC R6040 FastEthernet MAC series. -+ For kernel version after 2.4.22 -+ -+ Modification List -+ ---------- ------------------------------------------------ -+ 10-07-2007 Clean up the driver using checkpatch -+ 08-24-2006 Support at linux 2.6.10 above -+ 03-24-2006 Support NAPI -+ 03-21-2006 By Charies,change spin_lock_irqsave(lp->lock, flags) -+ to spin_lock_irqsave(&lp->lock, flags) -+ in set_multicast_list -+ 03-15-2006 Modify the set_multicast_list ,due to when re-plug the ethernet, -+ it will forget the previous setting -+ 07-12-2005 Tim, modify the set_multicast_list -+ 03-28-2005 Tim, modify some error mac register offset in -+ function set_multicast_list -+ 03-27-2005 Tim, Add the internal state machine reset -+ Sten, If multicast address more than 4, enter PROM mode -+ Changed rdc to r6040 -+ 12-22-2004 Sten Init MAC MBCR register=0x012A -+ PHY_CAP = 0x01E1 -+ -+ Need to Do LIst: -+ 1. If multicast address more than 4, use the multicast address hash -+*/ -+ -+#define DRV_NAME "r6040" -+#define DRV_VERSION "0.13" -+#define DRV_RELDATE "24Aug2006" -+ -+/* PHY CHIP Address */ -+#define PHY1_ADDR 1 /* For MAC1 */ -+#define PHY2_ADDR 2 /* For MAC2 */ -+#define PHY_MODE 0x3100 /* PHY CHIP Register 0 */ -+#define PHY_CAP 0x01E1 /* PHY CHIP Register 4 */ -+ -+/* Time in jiffies before concluding the transmitter is hung. */ -+#define TX_TIMEOUT (6000 * HZ / 1000) -+#define TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ -+ -+/* RDC MAC ID */ -+#define RDC_MAC_ID 0x6040 -+ -+/* RDC MAC I/O Size */ -+#define R6040_IO_SIZE 256 -+ -+/* RDC Chip PCI Command */ -+#define R6040_PCI_CMD 0x0005 /* IO, Master */ -+ -+/* MAX RDC MAC */ -+#define MAX_MAC 2 -+ -+/* MAC setting */ -+#define TX_DCNT 0x80 /* TX descriptor count */ -+#define RX_DCNT 0x80 /* RX descriptor count */ -+#define MAX_BUF_SIZE 0x600 -+#define ALLOC_DESC_SIZE ((TX_DCNT+RX_DCNT)*sizeof(struct r6040_descriptor)+0x10) -+#define MBCR_DEFAULT 0x012A /* MAC Bus Control Register */ -+ -+/* PHY settings */ -+#define ICPLUS_PHY_ID 0x0243 -+ -+/* Debug enable or not */ -+#define RDC_DEBUG 0 -+ -+#if RDC_DEBUG > 1 -+#define RDC_DBUG(msg, value) printk(KERN_ERR "%s %x\n", msg, value); -+#else -+#define RDC_DBUG(msg, value) -+#endif -+ -+ -+#include -+#include -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+MODULE_AUTHOR("Sten Wang , Daniel Gimpelevich , Florian Fainelli "); -+MODULE_LICENSE("GPL"); -+#ifdef CONFIG_R6040_NAPI -+MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet Driver"); -+#else -+MODULE_DESCRIPTION("RDC R6040 PCI FastEthernet Driver"); -+#endif -+ -+#define R6040_INT_MASK 0x0011 -+ -+struct r6040_descriptor { -+ u16 status, len; /* 0-3 */ -+ u32 buf; /* 4-7 */ -+ u32 ndesc; /* 8-B */ -+ u32 rev1; /* C-F */ -+ char *vbufp; /* 10-13 */ -+ struct r6040_descriptor *vndescp; /* 14-17 */ -+ struct sk_buff *skb_ptr; /* 18-1B */ -+ u32 rev2; /* 1C-1F */ -+} __attribute__((aligned(32))); -+ -+struct r6040_private { -+ struct net_device_stats stats; -+ spinlock_t lock; /* driver lock */ -+ struct timer_list timer; -+ struct pci_dev *pdev; -+ -+ struct r6040_descriptor *rx_insert_ptr; -+ struct r6040_descriptor *rx_remove_ptr; -+ struct r6040_descriptor *tx_insert_ptr; -+ struct r6040_descriptor *tx_remove_ptr; -+ u16 tx_free_desc, rx_free_desc, phy_addr, phy_mode; -+ u16 mcr0, mcr1; -+ dma_addr_t desc_dma; -+ char *desc_pool; -+ u16 switch_sig; -+}; -+ -+struct r6040_chip_info { -+ const char *name; -+ u16 pci_flags; -+ int io_size; -+ int drv_flags; -+}; -+ -+#ifdef CONFIG_R6040_NAPI -+static int NAPI_status; -+#endif -+ -+static int __devinitdata printed_version; -+#ifdef CONFIG_R6040_NAPI -+static char version[] __devinitdata = -+ KERN_INFO DRV_NAME ": RDC R6040 NAPI net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n"; -+#else -+static char version[] __devinitdata = -+ KERN_INFO DRV_NAME ": RDC R6040 net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n"; -+#endif -+static struct r6040_chip_info r6040_chip_info[] __devinitdata = -+{ -+ { "RDC R6040 Knight", R6040_PCI_CMD, R6040_IO_SIZE, 0} -+}; -+static char *parent; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) -+static int NUM_MAC_TABLE = 2 ; -+module_param(parent, charp, 0444); -+#else -+MODULE_PARM(parent, "s"); -+#endif -+MODULE_PARM_DESC(parent, "Parent network device name"); -+ -+static int phy_table[] = { 0x1, 0x2}; -+static u8 adr_table[2][8] = { -+ {0x00, 0x00, 0x60, 0x00, 0x00, 0x01}, -+ {0x00, 0x00, 0x60, 0x00, 0x00, 0x02} -+}; -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10) -+ module_param_array(adr_table, int, &NUM_MAC_TABLE, 0644); -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) -+ module_param_array(adr_table, int, NUM_MAC_TABLE, 0644); -+#else -+ MODULE_PARM(adr_table, "2-4i"); -+#endif -+MODULE_PARM_DESC(adr_table, "MAC Address (assigned)"); -+ -+static int r6040_open(struct net_device *dev); -+static int r6040_start_xmit(struct sk_buff *skb, struct net_device *dev); -+static irqreturn_t r6040_interrupt(int irq, void *dev_id); -+static struct net_device_stats *r6040_get_stats(struct net_device *dev); -+static int r6040_close(struct net_device *dev); -+static void set_multicast_list(struct net_device *dev); -+static struct ethtool_ops netdev_ethtool_ops; -+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); -+static void r6040_down(struct net_device *dev); -+static void r6040_up(struct net_device *dev); -+static void r6040_tx_timeout (struct net_device *dev); -+static void r6040_timer(unsigned long); -+ -+static int phy_mode_chk(struct net_device *dev); -+static int phy_read(int ioaddr, int phy_adr, int reg_idx); -+static void phy_write(int ioaddr, int phy_adr, int reg_idx, int dat); -+static void rx_buf_alloc(struct r6040_private *lp, struct net_device *dev); -+#ifdef CONFIG_R6040_NAPI -+static int r6040_poll(struct net_device *netdev, int *budget); -+#endif -+ -+ -+static int __devinit r6040_init_one (struct pci_dev *pdev, -+ const struct pci_device_id *ent) -+{ -+ struct net_device *dev; -+ struct r6040_private *lp; -+ int ioaddr, io_size, err; -+ static int card_idx = -1; -+ int chip_id = (int)ent->driver_data; -+ -+ RDC_DBUG("r6040_init_one()", 0); -+ -+ if (printed_version++) -+ printk(KERN_INFO "%s\n", version); -+ -+ err = pci_enable_device(pdev); -+ if (err) -+ return err; -+ -+ /* this should always be supported */ -+ if (pci_set_dma_mask(pdev, 0xffffffff)) { -+ printk(KERN_ERR DRV_NAME "32-bit PCI DMA addresses not supported by the card!?\n"); -+ return -ENODEV; -+ } -+ -+ /* IO Size check */ -+ io_size = r6040_chip_info[chip_id].io_size; -+ if (pci_resource_len (pdev, 0) < io_size) { -+ return -ENODEV; -+ } -+ -+ ioaddr = pci_resource_start (pdev, 0); /* IO map base address */ -+ pci_set_master(pdev); -+ -+ dev = alloc_etherdev(sizeof(struct r6040_private)); -+ if (dev == NULL) -+ return -ENOMEM; -+ SET_MODULE_OWNER(dev); -+ -+ if (pci_request_regions(pdev, DRV_NAME)) { -+ printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); -+ err = -ENODEV; -+ goto err_out_disable; -+ } -+ -+ /* Init system & device */ -+ lp = dev->priv; -+ dev->base_addr = ioaddr; -+ dev->irq = pdev->irq; -+ -+ spin_lock_init(&lp->lock); -+ pci_set_drvdata(pdev, dev); -+ -+ /* Set MAC address */ -+ card_idx++; -+ memcpy(dev->dev_addr, (u8 *)&adr_table[card_idx][0], 6); -+ -+ /* Link new device into r6040_root_dev */ -+ lp->pdev = pdev; -+ -+ /* Init RDC private data */ -+ lp->mcr0 = 0x1002; -+ lp->phy_addr = phy_table[card_idx]; -+ lp->switch_sig = 0; -+ -+ /* The RDC-specific entries in the device structure. */ -+ dev->open = &r6040_open; -+ dev->hard_start_xmit = &r6040_start_xmit; -+ dev->stop = &r6040_close; -+ dev->get_stats = &r6040_get_stats; -+ dev->set_multicast_list = &set_multicast_list; -+ dev->do_ioctl = &netdev_ioctl; -+ dev->ethtool_ops = &netdev_ethtool_ops; -+ dev->tx_timeout = &r6040_tx_timeout; -+ dev->watchdog_timeo = TX_TIMEOUT; -+#ifdef CONFIG_R6040_NAPI -+ dev->poll = &r6040_poll; -+ dev->weight = 64; -+#endif -+ -+ /* Register net device. After this dev->name assign */ -+ err = register_netdev(dev); -+ if (err) { -+ printk(KERN_ERR DRV_NAME ": Failed to register net device\n"); -+ goto err_out_res; -+ } -+ -+ netif_carrier_on(dev); -+ return 0; -+ -+err_out_res: -+ pci_release_regions(pdev); -+err_out_disable: -+ pci_disable_device(pdev); -+ pci_set_drvdata(pdev, NULL); -+ kfree(dev); -+ -+ return err; -+} -+ -+static void __devexit r6040_remove_one (struct pci_dev *pdev) -+{ -+ struct net_device *dev = pci_get_drvdata(pdev); -+ -+ unregister_netdev(dev); -+ pci_release_regions(pdev); -+ kfree(dev); -+ pci_disable_device(pdev); -+ pci_set_drvdata(pdev, NULL); -+} -+ -+static int -+r6040_open(struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ int i; -+ -+ RDC_DBUG("r6040_open()", 0); -+ -+ /* Request IRQ and Register interrupt handler */ -+ i = request_irq(dev->irq, &r6040_interrupt, SA_SHIRQ, dev->name, dev); -+ if (i) return i; -+ -+ /* Allocate Descriptor memory */ -+ lp->desc_pool = pci_alloc_consistent(lp->pdev, ALLOC_DESC_SIZE, &lp->desc_dma); -+ if (!lp->desc_pool) -+ return -ENOMEM; -+ -+ r6040_up(dev); -+ -+ netif_start_queue(dev); -+ -+ if (lp->switch_sig != ICPLUS_PHY_ID) { -+ /* set and active a timer process */ -+ init_timer(&lp->timer); -+ lp->timer.expires = TIMER_WUT; -+ lp->timer.data = (unsigned long)dev; -+ lp->timer.function = &r6040_timer; -+ add_timer(&lp->timer); -+ } -+ return 0; -+} -+ -+static void -+r6040_tx_timeout (struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ /* int ioaddr = dev->base_addr; -+ struct r6040_descriptor *descptr = lp->tx_remove_ptr; */ -+ -+ RDC_DBUG("r6040_tx_timeout()", 0); -+ -+ /* Transmitter timeout, serious problems. */ -+ /* Sten: Nothing need to do so far. */ -+ printk(KERN_ERR DRV_NAME ": Big Trobule, transmit timeout/n"); -+ lp->stats.tx_errors++; -+ netif_stop_queue(dev); -+ -+//printk(" XMT timedout: CR0 %x, CR40 %x, CR3C %x, CR2C %x, CR30 %x, CR34 %x, CR38 %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c), inw(ioaddr+0x2c), inw(ioaddr+0x30), inw(ioaddr+0x34), inw(ioaddr+0x38)); -+ -+//printk(" XMT_TO: %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp); -+} -+ -+ -+static int -+r6040_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ struct r6040_descriptor *descptr; -+ int ioaddr = dev->base_addr; -+ unsigned long flags; -+ -+ RDC_DBUG("r6040_start_xmit()", 0); -+ -+ if (skb == NULL) /* NULL skb directly return */ -+ return 0; -+ if (skb->len >= MAX_BUF_SIZE) { /* Packet too long, drop it */ -+ dev_kfree_skb(skb); -+ return 0; -+ } -+ -+ /* Critical Section */ -+ spin_lock_irqsave(&lp->lock, flags); -+ -+ /* TX resource check */ -+ if (!lp->tx_free_desc) { -+ spin_unlock_irqrestore(&lp->lock, flags); -+ printk(KERN_ERR DRV_NAME ": NO TX DESC "); -+ return 1; -+ } -+ -+ /* Statistic Counter */ -+ lp->stats.tx_packets++; -+ lp->stats.tx_bytes += skb->len; -+ -+ /* Set TX descriptor & Transmit it */ -+ lp->tx_free_desc--; -+ descptr = lp->tx_insert_ptr; -+ if (skb->len < 0x3c) -+ descptr->len = 0x3c; -+ else -+ descptr->len = skb->len; -+ -+ descptr->skb_ptr = skb; -+ descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); -+ descptr->status = 0x8000; -+ outw(0x01, ioaddr + 0x14); -+ lp->tx_insert_ptr = descptr->vndescp; -+ -+#if RDC_DEBUG -+ printk("Xmit(): %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp); -+#endif -+ -+ /* If no tx resource, stop */ -+ if (!lp->tx_free_desc) -+ netif_stop_queue(dev); -+ -+ dev->trans_start = jiffies; -+ spin_unlock_irqrestore(&lp->lock, flags); -+ return 0; -+} -+ -+/* The RDC interrupt handler. */ -+static irqreturn_t -+r6040_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = dev_id; -+ struct r6040_private *lp; -+ struct r6040_descriptor *descptr; -+ struct sk_buff *skb_ptr; -+ int ioaddr, status; -+ unsigned long flags; -+#ifdef CONFIG_R6040_NAPI -+ int handled = 1; -+#else -+ int handled = 0; -+#endif -+ -+ RDC_DBUG("r6040_interrupt()", 0); -+ if (dev == NULL) { -+ printk (KERN_ERR DRV_NAME ": INT() unknown device.\n"); -+ return IRQ_RETVAL(handled); -+ } -+ -+ lp = (struct r6040_private *)dev->priv; -+ spin_lock_irqsave(&lp->lock, flags); -+ -+ /* Check MAC Interrupt status */ -+ ioaddr = dev->base_addr; -+ outw(0x0, ioaddr + 0x40); /* Mask Off RDC MAC interrupt */ -+ status = inw(ioaddr + 0x3c); /* Read INTR status and clear */ -+ -+ -+#ifdef CONFIG_R6040_NAPI -+ if (netif_rx_schedule_prep(dev)) { -+ NAPI_status = status; -+ __netif_rx_schedule(dev); -+ } -+ -+ spin_unlock_irqrestore(&lp->lock, flags); -+ return IRQ_RETVAL(handled); -+#else -+ /* TX interrupt request */ -+ if (status & 0x10) { -+ handled = 1; -+ descptr = lp->tx_remove_ptr; -+ while (lp->tx_free_desc < TX_DCNT) { -+ if (descptr->status & 0x8000) -+ break; /* Not complte */ -+ skb_ptr = descptr->skb_ptr; -+ pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE); -+ dev_kfree_skb_irq(skb_ptr); /* Free buffer */ -+ descptr->skb_ptr = 0; -+ descptr = descptr->vndescp; /* To next descriptor */ -+ lp->tx_free_desc++; -+ } -+ lp->tx_remove_ptr = descptr; -+ if (lp->tx_free_desc) -+ netif_wake_queue(dev); -+ } -+ -+ /* RX interrupt request */ -+ if (status & 0x01) { -+ handled = 1; -+ descptr = lp->rx_remove_ptr; -+ while(lp->rx_free_desc) { -+ if (descptr->status & 0x8000) break; /* No Rx packet */ -+ skb_ptr = descptr->skb_ptr; -+ descptr->skb_ptr = 0; -+ skb_ptr->dev = dev; -+ skb_put(skb_ptr, descptr->len - 4); -+ pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE); -+ skb_ptr->protocol = eth_type_trans(skb_ptr, dev); -+ netif_rx(skb_ptr); /* Send to upper layer */ -+ lp->stats.rx_packets++; -+ lp->stats.rx_bytes += descptr->len; -+ descptr = descptr->vndescp; /* To next descriptor */ -+ lp->rx_free_desc--; -+ } -+ lp->rx_remove_ptr = descptr; -+ } -+ -+ /* Allocate new RX buffer */ -+ if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp,dev); -+ -+ outw(R6040_INT_MASK, ioaddr + 0x40); /* TX/RX interrupt enable */ -+ spin_unlock_irqrestore(&lp->lock, flags); -+#endif -+ return IRQ_RETVAL(handled); -+} -+ -+ -+static struct net_device_stats * -+r6040_get_stats(struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ -+ RDC_DBUG("r6040_get_stats()", 0); -+ return &lp->stats; -+} -+ -+/* -+ * Set or clear the multicast filter for this adaptor. -+ */ -+static void -+set_multicast_list(struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ struct dev_mc_list *mcptr; -+ int ioaddr = dev->base_addr; -+ u16 *adrp, i; -+ unsigned long flags; -+ -+ RDC_DBUG("set_multicast_list()", 0); -+ -+ /* MAC Address */ -+ adrp = (u16 *) dev->dev_addr; -+ outw(adrp[0], ioaddr + 0x68); -+ outw(adrp[1], ioaddr + 0x6A); -+ outw(adrp[2], ioaddr + 0x6C); -+ -+ -+#if RDC_DEBUG -+ printk("MAC ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]); -+#endif -+ -+ /* Promiscous Mode */ -+ spin_lock_irqsave(&lp->lock, flags); -+ i = inw(ioaddr) & ~0x0120; /* Clear AMCP & PROM */ -+ if (dev->flags & IFF_PROMISC) { -+ i |= 0x0020; -+ lp->mcr0 |= 0x0020; -+ } -+ if (dev->mc_count > 4) -+ i |= 0x0020; /* Too many multicast address */ -+ -+ outw(i, ioaddr); -+ spin_unlock_irqrestore(&lp->lock, flags); -+ -+ /* Multicast Address */ -+ if (dev->mc_count > 4) /* Wait to do: Hash Table for multicast */ -+ return; -+ -+ /* Multicast Address 1~4 case */ -+ for (i = 0, mcptr = dev->mc_list; (i < dev->mc_count) && (i < 4); i++) { -+ adrp = (u16 *)mcptr->dmi_addr; -+ outw(adrp[0], ioaddr + 0x70 + 8*i); -+ outw(adrp[1], ioaddr + 0x72 + 8*i); -+ outw(adrp[2], ioaddr + 0x74 + 8*i); -+ mcptr = mcptr->next; -+#if RDC_DEBUG -+ printk("M_ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]); -+#endif -+ } -+ for (i = dev->mc_count; i < 4; i++) { -+ outw(0xffff, ioaddr + 0x68 + 8*i); -+ outw(0xffff, ioaddr + 0x6A + 8*i); -+ outw(0xffff, ioaddr + 0x6C + 8*i); -+ } -+} -+ -+static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) -+{ -+ struct r6040_private *rp = dev->priv; -+ -+ strcpy (info->driver, DRV_NAME); -+ strcpy (info->version, DRV_VERSION); -+ strcpy (info->bus_info, pci_name(rp->pdev)); -+} -+ -+static struct ethtool_ops netdev_ethtool_ops = { -+ .get_drvinfo = netdev_get_drvinfo, -+}; -+ -+static int -+r6040_close(struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ -+ RDC_DBUG("r6040_close()", 0); -+ -+ /* deleted timer */ -+ del_timer_sync(&lp->timer); -+ -+ spin_lock_irq(&lp->lock); -+ -+ netif_stop_queue(dev); -+ -+ r6040_down(dev); -+ -+ spin_unlock_irq(&lp->lock); -+ -+ return 0; -+} -+ -+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) -+{ -+ struct r6040_private *lp = dev->priv; -+ -+ RDC_DBUG("netdev_ioctl()", 0); -+ -+ if (lp->switch_sig == ICPLUS_PHY_ID && cmd == SIOCDEVPRIVATE) { -+ unsigned long *data = (unsigned long *)rq->ifr_data, args[4]; -+ int ioaddr = dev->base_addr; -+ unsigned int val; -+ -+ data = (unsigned long *)rq->ifr_data; -+ if (copy_from_user(args, data, 4*sizeof(unsigned long))) -+ return -EFAULT; -+ -+ /* port priority */ -+ if(args[0]&(1<<31))phy_write(ioaddr, 29, 19, (phy_read(ioaddr, 29, 19) | 0x2000)); /* port 0 */ -+ if(args[0]&(1<<29))phy_write(ioaddr, 29, 19, (phy_read(ioaddr, 29, 19) | 0x0020)); /* port 1 */ -+ if(args[0]&(1<<27))phy_write(ioaddr, 29, 20, (phy_read(ioaddr, 29, 20) | 0x2000)); /* port 2 */ -+ if(args[0]&(1<<25))phy_write(ioaddr, 29, 20, (phy_read(ioaddr, 29, 20) | 0x0020)); /* port 3 */ -+ -+ } -+ return -EOPNOTSUPP; -+} -+ -+/** -+ Stop RDC MAC and Free the allocated resource -+ */ -+static void r6040_down(struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ int i; -+ int ioaddr = dev->base_addr; -+ -+ RDC_DBUG("r6040_down()", 0); -+ -+ /* Stop MAC */ -+ outw(0x0000, ioaddr + 0x40); /* Mask Off Interrupt */ -+ outw(0x0001, ioaddr + 0x04); /* Reset RDC MAC */ -+ i = 0; -+ do{}while((i++ < 2048) && (inw(ioaddr + 0x04) & 0x1)); -+ -+ free_irq(dev->irq, dev); -+ -+ /* Free RX buffer */ -+ for (i = 0; i < RX_DCNT; i++) { -+ if (lp->rx_insert_ptr->skb_ptr) { -+ pci_unmap_single(lp->pdev, lp->rx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE); -+ dev_kfree_skb(lp->rx_insert_ptr->skb_ptr); -+ lp->rx_insert_ptr->skb_ptr = 0; -+ } -+ lp->rx_insert_ptr = lp->rx_insert_ptr->vndescp; -+ } -+ -+ /* Free TX buffer */ -+ for (i = 0; i < TX_DCNT; i++) { -+ if (lp->tx_insert_ptr->skb_ptr) { -+ pci_unmap_single(lp->pdev, lp->tx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_TODEVICE); -+ dev_kfree_skb(lp->tx_insert_ptr->skb_ptr); -+ lp->rx_insert_ptr->skb_ptr = 0; -+ } -+ lp->tx_insert_ptr = lp->tx_insert_ptr->vndescp; -+ } -+ -+ /* Free Descriptor memory */ -+ pci_free_consistent(lp->pdev, ALLOC_DESC_SIZE, lp->desc_pool, lp->desc_dma); -+} -+ -+ -+ -+#ifdef CONFIG_R6040_NAPI -+static int r6040_poll(struct net_device *dev, int *budget) -+{ -+ struct r6040_private *lp; -+ struct r6040_descriptor *descptr; -+ struct sk_buff *skb_ptr; -+ int ioaddr, status; -+ unsigned long flags; -+ -+ -+ ioaddr = dev->base_addr; -+ lp = (struct r6040_private *)dev->priv; -+ unsigned long rx_work = dev->quota; -+ unsigned long rx; -+#if 1 -+ /* TX interrupt request */ -+ if (NAPI_status & 0x10) { -+ descptr = lp->tx_remove_ptr; -+ while (lp->tx_free_desc < TX_DCNT) { -+ if (descptr->status & 0x8000) -+ break; /* Not complte */ -+ -+ skb_ptr = descptr->skb_ptr; -+ pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE); -+ dev_kfree_skb_irq(skb_ptr); /* Free buffer */ -+ descptr->skb_ptr = 0; -+ descptr = descptr->vndescp; /* To next descriptor */ -+ lp->tx_free_desc++; -+ } -+ lp->tx_remove_ptr = descptr; -+ if (lp->tx_free_desc) netif_wake_queue(dev); -+ } -+#endif -+#if 1 -+ /* RX interrupt request */ -+ if (NAPI_status & 0x01) { -+ descptr = lp->rx_remove_ptr; -+ while (lp->rx_free_desc) { -+ if (descptr->status & 0x8000) -+ break; /* No Rx packet */ -+ skb_ptr = descptr->skb_ptr; -+ descptr->skb_ptr = 0; -+ skb_ptr->dev = dev; -+ skb_put(skb_ptr, descptr->len - 4); -+ pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE); -+ skb_ptr->protocol = eth_type_trans(skb_ptr, dev); -+ netif_receive_skb(skb_ptr); /* Send to upper layer */ -+ lp->stats.rx_packets++; -+ lp->stats.rx_bytes += descptr->len; -+ descptr = descptr->vndescp; /* To next descriptor */ -+ lp->rx_free_desc--; -+ } -+ lp->rx_remove_ptr = descptr; -+ } -+ /* Allocate new RX buffer */ -+ if (lp->rx_free_desc < RX_DCNT) -+ rx_buf_alloc(lp, dev); -+ -+ local_irq_disable(); -+ netif_rx_complete(dev); -+ outw(R6040_INT_MASK, ioaddr + 0x40); -+ local_irq_enable(); -+ return 0; -+#endif -+} -+#endif -+ -+/* Init RDC MAC */ -+static void r6040_up(struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ struct r6040_descriptor *descptr; -+ int i; -+ int ioaddr = dev->base_addr; -+ u32 tmp_addr; -+ dma_addr_t desc_dma, start_dma; -+ -+ RDC_DBUG("r6040_up()", 0); -+ -+ /* Initilize */ -+ lp->tx_free_desc = TX_DCNT; -+ lp->rx_free_desc = 0; -+ -+ /* Init descriptor */ -+ memset(lp->desc_pool, 0, ALLOC_DESC_SIZE); /* Let all descriptor = 0 */ -+ lp->tx_insert_ptr = (struct r6040_descriptor *)lp->desc_pool; -+ lp->tx_remove_ptr = lp->tx_insert_ptr; -+ lp->rx_insert_ptr = (struct r6040_descriptor *)lp->tx_insert_ptr+TX_DCNT; -+ lp->rx_remove_ptr = lp->rx_insert_ptr; -+ -+ /* Init TX descriptor */ -+ descptr = lp->tx_insert_ptr; -+ desc_dma = lp->desc_dma; -+ start_dma = desc_dma; -+ for (i = 0; i < TX_DCNT; i++) { -+ descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor)); -+ descptr->vndescp = (descptr + 1); -+ descptr = (descptr + 1); -+ desc_dma += sizeof(struct r6040_descriptor); -+ } -+ (descptr - 1)->ndesc = cpu_to_le32(start_dma); -+ (descptr - 1)->vndescp = lp->tx_insert_ptr; -+ -+ /* Init RX descriptor */ -+ start_dma = desc_dma; -+ descptr = lp->rx_insert_ptr; -+ for (i = 0; i < RX_DCNT; i++) { -+ descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor)); -+ descptr->vndescp = (descptr + 1); -+ descptr = (descptr + 1); -+ desc_dma += sizeof(struct r6040_descriptor); -+ } -+ (descptr - 1)->ndesc = cpu_to_le32(start_dma); -+ (descptr - 1)->vndescp = lp->rx_insert_ptr; -+ -+ /* Allocate buffer for RX descriptor */ -+ rx_buf_alloc(lp, dev); -+ -+#if RDC_DEBUG -+descptr = lp->tx_insert_ptr; -+for (i = 0; i < TX_DCNT; i++) { -+ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp); -+ descptr = descptr->vndescp; -+} -+descptr = lp->rx_insert_ptr; -+for (i = 0; i < RX_DCNT; i++) { -+ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp); -+ descptr = descptr->vndescp; -+} -+#endif -+ -+ /* MAC operation register */ -+ outw(0x01, ioaddr+0x04); /* Reset MAC */ -+ outw(2, ioaddr+0xAC); /* Reset internal state machine */ -+ outw(0, ioaddr+0xAC); -+ udelay(5000); -+ -+ /* TX and RX descriptor start Register */ -+ tmp_addr = cpu_to_le32(lp->tx_insert_ptr); -+ tmp_addr = virt_to_bus((volatile void *)tmp_addr); -+ outw((u16) tmp_addr, ioaddr+0x2c); -+ outw(tmp_addr >> 16, ioaddr+0x30); -+ tmp_addr = cpu_to_le32(lp->rx_insert_ptr); -+ tmp_addr = virt_to_bus((volatile void *)tmp_addr); -+ outw((u16) tmp_addr, ioaddr+0x34); -+ outw(tmp_addr >> 16, ioaddr+0x38); -+ -+ /* Buffer Size Register */ -+ outw(MAX_BUF_SIZE, ioaddr+0x18); -+ -+ if ((lp->switch_sig = phy_read(ioaddr, 0, 2)) == ICPLUS_PHY_ID) { -+ phy_write(ioaddr, 29,31, 0x175C); /* Enable registers */ -+ lp->phy_mode = 0x8000; -+ } else { -+ /* PHY Mode Check */ -+ phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP); -+ phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE); -+ -+ if (PHY_MODE == 0x3100) -+ lp->phy_mode = phy_mode_chk(dev); -+ else -+ lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0; -+ } -+ /* MAC Bus Control Register */ -+ outw(MBCR_DEFAULT, ioaddr+0x8); -+ -+ /* MAC TX/RX Enable */ -+ lp->mcr0 |= lp->phy_mode; -+ outw(lp->mcr0, ioaddr); -+ -+ /* set interrupt waiting time and packet numbers */ -+ outw(0x0802, ioaddr + 0x0C); -+ outw(0x0802, ioaddr + 0x10); -+ -+ /* upgrade performance (by RDC guys) */ -+ phy_write(ioaddr, 30, 17, (phy_read(ioaddr, 30, 17) | 0x4000)); //bit 14=1 -+ phy_write(ioaddr, 30, 17, ~((~phy_read(ioaddr, 30, 17)) | 0x2000)); //bit 13=0 -+ phy_write(ioaddr, 0, 19, 0x0000); -+ phy_write(ioaddr, 0, 30, 0x01F0); -+ -+ /* Interrupt Mask Register */ -+ outw(R6040_INT_MASK, ioaddr + 0x40); -+} -+ -+/* -+ A periodic timer routine -+ Polling PHY Chip Link Status -+*/ -+static void r6040_timer(unsigned long data) -+{ -+ struct net_device *dev = (struct net_device *)data; -+ struct r6040_private *lp = dev->priv; -+ u16 ioaddr = dev->base_addr, phy_mode; -+ -+ RDC_DBUG("r6040_timer()", 0); -+ -+ /* Polling PHY Chip Status */ -+ if (PHY_MODE == 0x3100) -+ phy_mode = phy_mode_chk(dev); -+ else -+ phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0; -+ -+ if (phy_mode != lp->phy_mode) { -+ lp->phy_mode = phy_mode; -+ lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode; -+ outw(lp->mcr0, ioaddr); -+ printk(KERN_INFO "Link Change %x \n", inw(ioaddr)); -+ } -+ -+ /* Debug */ -+// printk(" Timer: CR0 %x CR40 %x CR3C %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c)); -+ -+ /* Timer active again */ -+ lp->timer.expires = TIMER_WUT; -+ add_timer(&lp->timer); -+} -+ -+/* Allocate skb buffer for rx descriptor */ -+static void rx_buf_alloc(struct r6040_private *lp, struct net_device *dev) -+{ -+ struct r6040_descriptor *descptr; -+ int ioaddr = dev->base_addr ; -+ -+ RDC_DBUG("rx_buf_alloc()", 0); -+ -+ descptr = lp->rx_insert_ptr; -+ while (lp->rx_free_desc < RX_DCNT) { -+ descptr->skb_ptr = dev_alloc_skb(MAX_BUF_SIZE); -+ -+ if (!descptr->skb_ptr) -+ break; -+ descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, descptr->skb_ptr->tail, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE)); -+ descptr->status = 0x8000; -+ descptr = descptr->vndescp; -+ lp->rx_free_desc++; -+ outw(lp->mcr0 | 0x0002, ioaddr); /* Trigger Rx DMA */ -+ } -+ lp->rx_insert_ptr = descptr; -+} -+ -+/* Status of PHY CHIP */ -+static int phy_mode_chk(struct net_device *dev) -+{ -+ struct r6040_private *lp = dev->priv; -+ int ioaddr = dev->base_addr, phy_dat; -+ -+ RDC_DBUG("phy_mode_chk()", 0); -+ -+ /* PHY Link Status Check */ -+ phy_dat = phy_read(ioaddr, lp->phy_addr, 1); -+ if (!(phy_dat & 0x4)) -+ return 0x8000; /* Link Failed, full duplex */ -+ -+ /* PHY Chip Auto-Negotiation Status */ -+ phy_dat = phy_read(ioaddr, lp->phy_addr, 1); -+ if (phy_dat & 0x0020) { -+ /* Auto Negotiation Mode */ -+ phy_dat = phy_read(ioaddr, lp->phy_addr, 5); -+ phy_dat &= phy_read(ioaddr, lp->phy_addr, 4); -+ if (phy_dat & 0x140) -+ phy_dat = 0x8000; -+ else -+ phy_dat = 0; -+ } else { -+ /* Force Mode */ -+ phy_dat = phy_read(ioaddr, lp->phy_addr, 0); -+ if (phy_dat & 0x100) phy_dat = 0x8000; -+ else phy_dat = 0x0000; -+ } -+ -+ return phy_dat; -+}; -+ -+/* Read a word data from PHY Chip */ -+static int phy_read(int ioaddr, int phy_addr, int reg_idx) -+{ -+ int i = 0; -+ -+ RDC_DBUG("phy_read()", 0); -+ outw(0x2000 + reg_idx + (phy_addr << 8), ioaddr + 0x20); -+ do {} while ((i++ < 2048) && (inw(ioaddr + 0x20) & 0x2000)); -+ -+ return inw(ioaddr + 0x24); -+} -+ -+/* Write a word data from PHY Chip */ -+static void phy_write(int ioaddr, int phy_addr, int reg_idx, int dat) -+{ -+ int i = 0; -+ -+ RDC_DBUG("phy_write()", 0); -+ outw(dat, ioaddr + 0x28); -+ outw(0x4000 + reg_idx + (phy_addr << 8), ioaddr + 0x20); -+ do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x4000) ); -+} -+ -+enum { -+ RDC_6040 = 0 -+}; -+ -+static struct pci_device_id r6040_pci_tbl[] = { -+ {PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6040, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040}, -+ /*{0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},*/ -+ {0,} -+}; -+MODULE_DEVICE_TABLE(pci, r6040_pci_tbl); -+ -+static struct pci_driver r6040_driver = { -+ .name = "r6040", -+ .id_table = r6040_pci_tbl, -+ .probe = r6040_init_one, -+ .remove = __devexit_p(r6040_remove_one), -+}; -+ -+ -+static int __init r6040_init (void) -+{ -+ RDC_DBUG("r6040_init()", 0); -+ -+ printk(KERN_INFO "%s\n", version); -+ printed_version = 1; -+ -+ if (parent != NULL) { -+ struct net_device *the_parent = dev_get_by_name(parent); -+ -+ if (the_parent == NULL) { -+ printk (KERN_ERR DRV_NAME ": Unknown device \"%s\" specified.\n", parent); -+ return -EINVAL; -+ } -+ memcpy((u8 *)&adr_table[0][0], the_parent->dev_addr, 6); -+ memcpy((u8 *)&adr_table[1][0], the_parent->dev_addr, 6); -+ ++*(u8 *)&adr_table[0][5]; -+ } -+ return pci_register_driver (&r6040_driver); -+} -+ -+ -+static void __exit r6040_cleanup (void) -+{ -+ RDC_DBUG("r6040_cleanup()", 0); -+ pci_unregister_driver (&r6040_driver); -+} -+ -+module_init(r6040_init); -+module_exit(r6040_cleanup); diff --git a/target/linux/rdc/patches-2.6.23/003-rootfstype.patch b/target/linux/rdc/patches-2.6.23/003-rootfstype.patch deleted file mode 100644 index 34ac3d0a71..0000000000 --- a/target/linux/rdc/patches-2.6.23/003-rootfstype.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.19.2/init/do_mounts.c 2007-01-10 11:10:37.000000000 -0800 -+++ foo/init/do_mounts.c 2007-04-05 13:15:37.000000000 -0700 -@@ -243,6 +243,8 @@ - { - char *s = page; - -+ if (!root_fs_names) -+ root_fs_names = "squashfs,jffs2"; - if (root_fs_names) { - strcpy(page, root_fs_names); - while (*s++) { diff --git a/target/linux/rdc/patches-2.6.23/004-rdc_fixes.patch b/target/linux/rdc/patches-2.6.23/004-rdc_fixes.patch deleted file mode 100644 index 7b87773cf1..0000000000 --- a/target/linux/rdc/patches-2.6.23/004-rdc_fixes.patch +++ /dev/null @@ -1,73 +0,0 @@ -diff -urN linux-2.6.19/arch/i386/Kconfig linux-2.6.19.new/arch/i386/Kconfig ---- linux-2.6.19/arch/i386/Kconfig 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.new/arch/i386/Kconfig 2006-12-17 17:13:33.000000000 +0100 -@@ -180,6 +180,16 @@ - Only choose this option if you have such a system, otherwise you - should say N here. - -+config X86_RDC -+ bool "Support for RDC 3211 boards" -+ select GENERIC_GPIO -+ select LEDS_GPIO -+ help -+ Support for RDC 3211 systems. Say 'Y' here if the kernel is -+ supposed to run on an IA-32 RDC R3211 system. -+ Only choose this option if you have such as system, otherwise you -+ should say N here. -+ - endchoice - - config ACPI_SRAT -diff -urN linux-2.6.19/arch/i386/Makefile linux-2.6.19.new/arch/i386/Makefile ---- linux-2.6.19/arch/i386/Makefile 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19.new/arch/i386/Makefile 2006-12-17 17:13:33.000000000 +0100 -@@ -92,6 +92,10 @@ - mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-i386/mach-es7000 - mcore-$(CONFIG_X86_ES7000) := mach-default - core-$(CONFIG_X86_ES7000) := arch/i386/mach-es7000/ -+# RDC subarch support -+mflags-$(CONFIG_X86_RDC) := -Iinclude/asm-i386/mach-rdc -+mcore-$(CONFIG_X86_RDC) := mach-default -+core-$(CONFIG_X86_RDC) += arch/i386/mach-rdc/ - - # default subarch .h files - mflags-y += -Iinclude/asm-i386/mach-default ---- timex.h 2007-08-07 10:44:03.816112250 -0700 -+++ linux/include/asm-i386/timex.h 2007-08-07 10:48:47.905866750 -0700 -@@ -11,6 +11,8 @@ - - #ifdef CONFIG_X86_ELAN - # define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */ -+#elif defined(CONFIG_X86_RDC) -+# define CLOCK_TICK_RATE 1041667 /* Underlying HZ for R8610 */ - #else - # define CLOCK_TICK_RATE 1193182 /* Underlying HZ */ - #endif ---- reboot_fixups.c 2007-08-07 12:02:00.908412250 -0700 -+++ linux/arch/i386/kernel/reboot_fixups.c 2007-08-07 12:18:49.391438500 -0700 -@@ -13,6 +13,17 @@ - #include - #include - #include -+ -+static void r8610_reset(struct pci_dev *dev) -+{ -+ int i; -+ -+ outl(0x80003840,0xCF8); -+ i=inl(0xCFC); -+ i |= 0x1600; -+ outl(i,0xCFC); -+ outb(1,0x92); -+} - - static void cs5530a_warm_reset(struct pci_dev *dev) - { -@@ -40,6 +53,7 @@ - }; - - static struct device_fixup fixups_table[] = { -+{ PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, r8610_reset }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, - }; diff --git a/target/linux/rdc/patches-2.6.23/005-rdc_x86_cpu_type.patch b/target/linux/rdc/patches-2.6.23/005-rdc_x86_cpu_type.patch deleted file mode 100644 index 9e0eefb09e..0000000000 --- a/target/linux/rdc/patches-2.6.23/005-rdc_x86_cpu_type.patch +++ /dev/null @@ -1,22 +0,0 @@ -diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile ---- linux-2.6.22.1/arch/i386/kernel/cpu/Makefile 2007-08-11 22:16:24.000000000 +0200 -+++ linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile 2007-08-13 16:37:32.000000000 +0200 -@@ -12,6 +12,7 @@ - obj-y += rise.o - obj-y += nexgen.o - obj-y += umc.o -+obj-$(CONFIG_X86_RDC) += rdc.o - - obj-$(CONFIG_X86_MCE) += mcheck/ - -diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile ---- linux-2.6.22.1/include/asm-i386/processor.h 2007-08-13 16:42:25.000000000 +0200 -+++ linux-2.6.22.1.new/include/asm-i386/processor.h 2007-08-13 16:51:19.000000000 +0200 -@@ -92,6 +92,7 @@ - #define X86_VENDOR_TRANSMETA 7 - #define X86_VENDOR_NSC 8 - #define X86_VENDOR_NUM 9 -+#define X86_VENDOR_RDC 0xff - #define X86_VENDOR_UNKNOWN 0xff - - /* diff --git a/target/linux/rdc/patches-2.6.23/006-pci_ids.patch b/target/linux/rdc/patches-2.6.23/006-pci_ids.patch deleted file mode 100644 index cd4c01d920..0000000000 --- a/target/linux/rdc/patches-2.6.23/006-pci_ids.patch +++ /dev/null @@ -1,18 +0,0 @@ -diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h -index 55f307f..4a1aa34 100644 ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -2076,6 +2076,13 @@ - #define PCI_DEVICE_ID_HERC_WIN 0x5732 - #define PCI_DEVICE_ID_HERC_UNI 0x5832 - -+#define PCI_VENDOR_ID_RDC 0x17f3 -+#define PCI_DEVICE_ID_RDC_R6020 0x6020 -+#define PCI_DEVICE_ID_RDC_R6030 0x6030 -+#define PCI_DEVICE_ID_RDC_R6040 0x6040 -+#define PCI_DEVICE_ID_RDC_R6060 0x6060 -+#define PCI_DEVICE_ID_RDC_R6061 0x6061 -+ - #define PCI_VENDOR_ID_SITECOM 0x182d - #define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069 - diff --git a/target/linux/rdc/patches-2.6.23/600-x86_lzma.patch b/target/linux/rdc/patches-2.6.23/600-x86_lzma.patch deleted file mode 100644 index bb10f1fdcc..0000000000 --- a/target/linux/rdc/patches-2.6.23/600-x86_lzma.patch +++ /dev/null @@ -1,1042 +0,0 @@ -diff -Naur linux-old/arch/i386/boot/compressed/LzmaDecode.c linux-lzma/arch/i386/boot/compressed/LzmaDecode.c ---- linux-old/arch/i386/boot/compressed/LzmaDecode.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-lzma/arch/i386/boot/compressed/LzmaDecode.c 2005-06-05 00:07:38.000000000 -0400 -@@ -0,0 +1,586 @@ -+/* -+ LzmaDecode.c -+ LZMA Decoder (optimized for Speed version) -+ -+ LZMA SDK 4.17 Copyright (c) 1999-2005 Igor Pavlov (2005-04-05) -+ http://www.7-zip.org/ -+ -+ LZMA SDK is licensed under two licenses: -+ 1) GNU Lesser General Public License (GNU LGPL) -+ 2) Common Public License (CPL) -+ It means that you can select one of these two licenses and -+ follow rules of that license. -+ -+ SPECIAL EXCEPTION: -+ Igor Pavlov, as the author of this Code, expressly permits you to -+ statically or dynamically link your Code (or bind by name) to the -+ interfaces of this file without subjecting your linked Code to the -+ terms of the CPL or GNU LGPL. Any modifications or additions -+ to this file, however, are subject to the LGPL or CPL terms. -+*/ -+ -+#include "LzmaDecode.h" -+ -+#ifndef Byte -+#define Byte unsigned char -+#endif -+ -+#define kNumTopBits 24 -+#define kTopValue ((UInt32)1 << kNumTopBits) -+ -+#define kNumBitModelTotalBits 11 -+#define kBitModelTotal (1 << kNumBitModelTotalBits) -+#define kNumMoveBits 5 -+ -+#define RC_READ_BYTE (*Buffer++) -+ -+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ -+ { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} -+ -+#ifdef _LZMA_IN_CB -+ -+#define RC_TEST { if (Buffer == BufferLim) \ -+ { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ -+ BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} -+ -+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 -+ -+#else -+ -+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } -+ -+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 -+ -+#endif -+ -+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } -+ -+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; -+ -+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ -+ { UpdateBit0(p); mi <<= 1; A0; } else \ -+ { UpdateBit1(p); mi = (mi + mi) + 1; A1; } -+ -+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) -+ -+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ -+ { int i = numLevels; res = 1; \ -+ do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ -+ res -= (1 << numLevels); } -+ -+ -+#define kNumPosBitsMax 4 -+#define kNumPosStatesMax (1 << kNumPosBitsMax) -+ -+#define kLenNumLowBits 3 -+#define kLenNumLowSymbols (1 << kLenNumLowBits) -+#define kLenNumMidBits 3 -+#define kLenNumMidSymbols (1 << kLenNumMidBits) -+#define kLenNumHighBits 8 -+#define kLenNumHighSymbols (1 << kLenNumHighBits) -+ -+#define LenChoice 0 -+#define LenChoice2 (LenChoice + 1) -+#define LenLow (LenChoice2 + 1) -+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) -+ -+ -+#define kNumStates 12 -+#define kNumLitStates 7 -+ -+#define kStartPosModelIndex 4 -+#define kEndPosModelIndex 14 -+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) -+ -+#define kNumPosSlotBits 6 -+#define kNumLenToPosStates 4 -+ -+#define kNumAlignBits 4 -+#define kAlignTableSize (1 << kNumAlignBits) -+ -+#define kMatchMinLen 2 -+ -+#define IsMatch 0 -+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -+#define IsRepG0 (IsRep + kNumStates) -+#define IsRepG1 (IsRepG0 + kNumStates) -+#define IsRepG2 (IsRepG1 + kNumStates) -+#define IsRep0Long (IsRepG2 + kNumStates) -+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -+#define LenCoder (Align + kAlignTableSize) -+#define RepLenCoder (LenCoder + kNumLenProbs) -+#define Literal (RepLenCoder + kNumLenProbs) -+ -+#if Literal != LZMA_BASE_SIZE -+StopCompilingDueBUG -+#endif -+ -+#ifdef _LZMA_OUT_READ -+ -+typedef struct _LzmaVarState -+{ -+ Byte *Buffer; -+ Byte *BufferLim; -+ UInt32 Range; -+ UInt32 Code; -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *InCallback; -+ #endif -+ Byte *Dictionary; -+ UInt32 DictionarySize; -+ UInt32 DictionaryPos; -+ UInt32 GlobalPos; -+ UInt32 Reps[4]; -+ int lc; -+ int lp; -+ int pb; -+ int State; -+ int RemainLen; -+ Byte TempDictionary[4]; -+} LzmaVarState; -+ -+int LzmaDecoderInit( -+ unsigned char *buffer, UInt32 bufferSize, -+ int lc, int lp, int pb, -+ unsigned char *dictionary, UInt32 dictionarySize, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *InCallback -+ #else -+ unsigned char *inStream, UInt32 inSize -+ #endif -+ ) -+{ -+ Byte *Buffer; -+ Byte *BufferLim; -+ UInt32 Range; -+ UInt32 Code; -+ LzmaVarState *vs = (LzmaVarState *)buffer; -+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); -+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); -+ UInt32 i; -+ if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) -+ return LZMA_RESULT_NOT_ENOUGH_MEM; -+ vs->Dictionary = dictionary; -+ vs->DictionarySize = dictionarySize; -+ vs->DictionaryPos = 0; -+ vs->GlobalPos = 0; -+ vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; -+ vs->lc = lc; -+ vs->lp = lp; -+ vs->pb = pb; -+ vs->State = 0; -+ vs->RemainLen = 0; -+ dictionary[dictionarySize - 1] = 0; -+ for (i = 0; i < numProbs; i++) -+ p[i] = kBitModelTotal >> 1; -+ -+ #ifdef _LZMA_IN_CB -+ RC_INIT; -+ #else -+ RC_INIT(inStream, inSize); -+ #endif -+ vs->Buffer = Buffer; -+ vs->BufferLim = BufferLim; -+ vs->Range = Range; -+ vs->Code = Code; -+ #ifdef _LZMA_IN_CB -+ vs->InCallback = InCallback; -+ #endif -+ -+ return LZMA_RESULT_OK; -+} -+ -+int LzmaDecode(unsigned char *buffer, -+ unsigned char *outStream, UInt32 outSize, -+ UInt32 *outSizeProcessed) -+{ -+ LzmaVarState *vs = (LzmaVarState *)buffer; -+ Byte *Buffer = vs->Buffer; -+ Byte *BufferLim = vs->BufferLim; -+ UInt32 Range = vs->Range; -+ UInt32 Code = vs->Code; -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *InCallback = vs->InCallback; -+ #endif -+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); -+ int state = vs->State; -+ Byte previousByte; -+ UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; -+ UInt32 nowPos = 0; -+ UInt32 posStateMask = (1 << (vs->pb)) - 1; -+ UInt32 literalPosMask = (1 << (vs->lp)) - 1; -+ int lc = vs->lc; -+ int len = vs->RemainLen; -+ UInt32 globalPos = vs->GlobalPos; -+ -+ Byte *dictionary = vs->Dictionary; -+ UInt32 dictionarySize = vs->DictionarySize; -+ UInt32 dictionaryPos = vs->DictionaryPos; -+ -+ Byte tempDictionary[4]; -+ if (dictionarySize == 0) -+ { -+ dictionary = tempDictionary; -+ dictionarySize = 1; -+ tempDictionary[0] = vs->TempDictionary[0]; -+ } -+ -+ if (len == -1) -+ { -+ *outSizeProcessed = 0; -+ return LZMA_RESULT_OK; -+ } -+ -+ while(len != 0 && nowPos < outSize) -+ { -+ UInt32 pos = dictionaryPos - rep0; -+ if (pos >= dictionarySize) -+ pos += dictionarySize; -+ outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; -+ if (++dictionaryPos == dictionarySize) -+ dictionaryPos = 0; -+ len--; -+ } -+ if (dictionaryPos == 0) -+ previousByte = dictionary[dictionarySize - 1]; -+ else -+ previousByte = dictionary[dictionaryPos - 1]; -+#else -+ -+int LzmaDecode( -+ Byte *buffer, UInt32 bufferSize, -+ int lc, int lp, int pb, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *InCallback, -+ #else -+ unsigned char *inStream, UInt32 inSize, -+ #endif -+ unsigned char *outStream, UInt32 outSize, -+ UInt32 *outSizeProcessed) -+{ -+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); -+ CProb *p = (CProb *)buffer; -+ -+ UInt32 i; -+ int state = 0; -+ Byte previousByte = 0; -+ UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; -+ UInt32 nowPos = 0; -+ UInt32 posStateMask = (1 << pb) - 1; -+ UInt32 literalPosMask = (1 << lp) - 1; -+ int len = 0; -+ -+ Byte *Buffer; -+ Byte *BufferLim; -+ UInt32 Range; -+ UInt32 Code; -+ -+ if (bufferSize < numProbs * sizeof(CProb)) -+ return LZMA_RESULT_NOT_ENOUGH_MEM; -+ for (i = 0; i < numProbs; i++) -+ p[i] = kBitModelTotal >> 1; -+ -+ -+ #ifdef _LZMA_IN_CB -+ RC_INIT; -+ #else -+ RC_INIT(inStream, inSize); -+ #endif -+#endif -+ -+ *outSizeProcessed = 0; -+ while(nowPos < outSize) -+ { -+ CProb *prob; -+ UInt32 bound; -+ int posState = (int)( -+ (nowPos -+ #ifdef _LZMA_OUT_READ -+ + globalPos -+ #endif -+ ) -+ & posStateMask); -+ -+ prob = p + IsMatch + (state << kNumPosBitsMax) + posState; -+ IfBit0(prob) -+ { -+ int symbol = 1; -+ UpdateBit0(prob) -+ prob = p + Literal + (LZMA_LIT_SIZE * -+ ((( -+ (nowPos -+ #ifdef _LZMA_OUT_READ -+ + globalPos -+ #endif -+ ) -+ & literalPosMask) << lc) + (previousByte >> (8 - lc)))); -+ -+ if (state >= kNumLitStates) -+ { -+ int matchByte; -+ #ifdef _LZMA_OUT_READ -+ UInt32 pos = dictionaryPos - rep0; -+ if (pos >= dictionarySize) -+ pos += dictionarySize; -+ matchByte = dictionary[pos]; -+ #else -+ matchByte = outStream[nowPos - rep0]; -+ #endif -+ do -+ { -+ int bit; -+ CProb *probLit; -+ matchByte <<= 1; -+ bit = (matchByte & 0x100); -+ probLit = prob + 0x100 + bit + symbol; -+ RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) -+ } -+ while (symbol < 0x100); -+ } -+ while (symbol < 0x100) -+ { -+ CProb *probLit = prob + symbol; -+ RC_GET_BIT(probLit, symbol) -+ } -+ previousByte = (Byte)symbol; -+ -+ outStream[nowPos++] = previousByte; -+ #ifdef _LZMA_OUT_READ -+ dictionary[dictionaryPos] = previousByte; -+ if (++dictionaryPos == dictionarySize) -+ dictionaryPos = 0; -+ #endif -+ if (state < 4) state = 0; -+ else if (state < 10) state -= 3; -+ else state -= 6; -+ } -+ else -+ { -+ UpdateBit1(prob); -+ prob = p + IsRep + state; -+ IfBit0(prob) -+ { -+ UpdateBit0(prob); -+ rep3 = rep2; -+ rep2 = rep1; -+ rep1 = rep0; -+ state = state < kNumLitStates ? 0 : 3; -+ prob = p + LenCoder; -+ } -+ else -+ { -+ UpdateBit1(prob); -+ prob = p + IsRepG0 + state; -+ IfBit0(prob) -+ { -+ UpdateBit0(prob); -+ prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; -+ IfBit0(prob) -+ { -+ #ifdef _LZMA_OUT_READ -+ UInt32 pos; -+ #endif -+ UpdateBit0(prob); -+ if (nowPos -+ #ifdef _LZMA_OUT_READ -+ + globalPos -+ #endif -+ == 0) -+ return LZMA_RESULT_DATA_ERROR; -+ state = state < kNumLitStates ? 9 : 11; -+ #ifdef _LZMA_OUT_READ -+ pos = dictionaryPos - rep0; -+ if (pos >= dictionarySize) -+ pos += dictionarySize; -+ previousByte = dictionary[pos]; -+ dictionary[dictionaryPos] = previousByte; -+ if (++dictionaryPos == dictionarySize) -+ dictionaryPos = 0; -+ #else -+ previousByte = outStream[nowPos - rep0]; -+ #endif -+ outStream[nowPos++] = previousByte; -+ continue; -+ } -+ else -+ { -+ UpdateBit1(prob); -+ } -+ } -+ else -+ { -+ UInt32 distance; -+ UpdateBit1(prob); -+ prob = p + IsRepG1 + state; -+ IfBit0(prob) -+ { -+ UpdateBit0(prob); -+ distance = rep1; -+ } -+ else -+ { -+ UpdateBit1(prob); -+ prob = p + IsRepG2 + state; -+ IfBit0(prob) -+ { -+ UpdateBit0(prob); -+ distance = rep2; -+ } -+ else -+ { -+ UpdateBit1(prob); -+ distance = rep3; -+ rep3 = rep2; -+ } -+ rep2 = rep1; -+ } -+ rep1 = rep0; -+ rep0 = distance; -+ } -+ state = state < kNumLitStates ? 8 : 11; -+ prob = p + RepLenCoder; -+ } -+ { -+ int numBits, offset; -+ CProb *probLen = prob + LenChoice; -+ IfBit0(probLen) -+ { -+ UpdateBit0(probLen); -+ probLen = prob + LenLow + (posState << kLenNumLowBits); -+ offset = 0; -+ numBits = kLenNumLowBits; -+ } -+ else -+ { -+ UpdateBit1(probLen); -+ probLen = prob + LenChoice2; -+ IfBit0(probLen) -+ { -+ UpdateBit0(probLen); -+ probLen = prob + LenMid + (posState << kLenNumMidBits); -+ offset = kLenNumLowSymbols; -+ numBits = kLenNumMidBits; -+ } -+ else -+ { -+ UpdateBit1(probLen); -+ probLen = prob + LenHigh; -+ offset = kLenNumLowSymbols + kLenNumMidSymbols; -+ numBits = kLenNumHighBits; -+ } -+ } -+ RangeDecoderBitTreeDecode(probLen, numBits, len); -+ len += offset; -+ } -+ -+ if (state < 4) -+ { -+ int posSlot; -+ state += kNumLitStates; -+ prob = p + PosSlot + -+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << -+ kNumPosSlotBits); -+ RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); -+ if (posSlot >= kStartPosModelIndex) -+ { -+ int numDirectBits = ((posSlot >> 1) - 1); -+ rep0 = (2 | ((UInt32)posSlot & 1)); -+ if (posSlot < kEndPosModelIndex) -+ { -+ rep0 <<= numDirectBits; -+ prob = p + SpecPos + rep0 - posSlot - 1; -+ } -+ else -+ { -+ numDirectBits -= kNumAlignBits; -+ do -+ { -+ RC_NORMALIZE -+ Range >>= 1; -+ rep0 <<= 1; -+ if (Code >= Range) -+ { -+ Code -= Range; -+ rep0 |= 1; -+ } -+ } -+ while (--numDirectBits != 0); -+ prob = p + Align; -+ rep0 <<= kNumAlignBits; -+ numDirectBits = kNumAlignBits; -+ } -+ { -+ int i = 1; -+ int mi = 1; -+ do -+ { -+ CProb *prob3 = prob + mi; -+ RC_GET_BIT2(prob3, mi, ; , rep0 |= i); -+ i <<= 1; -+ } -+ while(--numDirectBits != 0); -+ } -+ } -+ else -+ rep0 = posSlot; -+ if (++rep0 == (UInt32)(0)) -+ { -+ /* it's for stream version */ -+ len = -1; -+ break; -+ } -+ } -+ -+ len += kMatchMinLen; -+ if (rep0 > nowPos -+ #ifdef _LZMA_OUT_READ -+ + globalPos || rep0 > dictionarySize -+ #endif -+ ) -+ return LZMA_RESULT_DATA_ERROR; -+ do -+ { -+ #ifdef _LZMA_OUT_READ -+ UInt32 pos = dictionaryPos - rep0; -+ if (pos >= dictionarySize) -+ pos += dictionarySize; -+ previousByte = dictionary[pos]; -+ dictionary[dictionaryPos] = previousByte; -+ if (++dictionaryPos == dictionarySize) -+ dictionaryPos = 0; -+ #else -+ previousByte = outStream[nowPos - rep0]; -+ #endif -+ len--; -+ outStream[nowPos++] = previousByte; -+ } -+ while(len != 0 && nowPos < outSize); -+ } -+ } -+ RC_NORMALIZE; -+ -+ #ifdef _LZMA_OUT_READ -+ vs->Buffer = Buffer; -+ vs->BufferLim = BufferLim; -+ vs->Range = Range; -+ vs->Code = Code; -+ vs->DictionaryPos = dictionaryPos; -+ vs->GlobalPos = globalPos + nowPos; -+ vs->Reps[0] = rep0; -+ vs->Reps[1] = rep1; -+ vs->Reps[2] = rep2; -+ vs->Reps[3] = rep3; -+ vs->State = state; -+ vs->RemainLen = len; -+ vs->TempDictionary[0] = tempDictionary[0]; -+ #endif -+ -+ *outSizeProcessed = nowPos; -+ return LZMA_RESULT_OK; -+} -diff -Naur linux-old/arch/i386/boot/compressed/LzmaDecode.h linux-lzma/arch/i386/boot/compressed/LzmaDecode.h ---- linux-old/arch/i386/boot/compressed/LzmaDecode.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux-lzma/arch/i386/boot/compressed/LzmaDecode.h 2005-06-05 00:07:39.000000000 -0400 -@@ -0,0 +1,100 @@ -+/* -+ LzmaDecode.h -+ LZMA Decoder interface -+ -+ LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18) -+ http://www.7-zip.org/ -+ -+ LZMA SDK is licensed under two licenses: -+ 1) GNU Lesser General Public License (GNU LGPL) -+ 2) Common Public License (CPL) -+ It means that you can select one of these two licenses and -+ follow rules of that license. -+ -+ SPECIAL EXCEPTION: -+ Igor Pavlov, as the author of this code, expressly permits you to -+ statically or dynamically link your code (or bind by name) to the -+ interfaces of this file without subjecting your linked code to the -+ terms of the CPL or GNU LGPL. Any modifications or additions -+ to this file, however, are subject to the LGPL or CPL terms. -+*/ -+ -+#ifndef __LZMADECODE_H -+#define __LZMADECODE_H -+ -+/* #define _LZMA_IN_CB */ -+/* Use callback for input data */ -+ -+/* #define _LZMA_OUT_READ */ -+/* Use read function for output data */ -+ -+/* #define _LZMA_PROB32 */ -+/* It can increase speed on some 32-bit CPUs, -+ but memory usage will be doubled in that case */ -+ -+/* #define _LZMA_LOC_OPT */ -+/* Enable local speed optimizations inside code */ -+ -+#ifndef UInt32 -+#ifdef _LZMA_UINT32_IS_ULONG -+#define UInt32 unsigned long -+#else -+#define UInt32 unsigned int -+#endif -+#endif -+ -+#ifdef _LZMA_PROB32 -+#define CProb UInt32 -+#else -+#define CProb unsigned short -+#endif -+ -+#define LZMA_RESULT_OK 0 -+#define LZMA_RESULT_DATA_ERROR 1 -+#define LZMA_RESULT_NOT_ENOUGH_MEM 2 -+ -+#ifdef _LZMA_IN_CB -+typedef struct _ILzmaInCallback -+{ -+ int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -+} ILzmaInCallback; -+#endif -+ -+#define LZMA_BASE_SIZE 1846 -+#define LZMA_LIT_SIZE 768 -+ -+/* -+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -+bufferSize += 100 in case of _LZMA_OUT_READ -+by default CProb is unsigned short, -+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -+*/ -+ -+#ifdef _LZMA_OUT_READ -+int LzmaDecoderInit( -+ unsigned char *buffer, UInt32 bufferSize, -+ int lc, int lp, int pb, -+ unsigned char *dictionary, UInt32 dictionarySize, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *inCallback -+ #else -+ unsigned char *inStream, UInt32 inSize -+ #endif -+); -+#endif -+ -+int LzmaDecode( -+ unsigned char *buffer, -+ #ifndef _LZMA_OUT_READ -+ UInt32 bufferSize, -+ int lc, int lp, int pb, -+ #ifdef _LZMA_IN_CB -+ ILzmaInCallback *inCallback, -+ #else -+ unsigned char *inStream, UInt32 inSize, -+ #endif -+ #endif -+ unsigned char *outStream, UInt32 outSize, -+ UInt32 *outSizeProcessed); -+ -+#endif -diff -Naur linux-old/arch/i386/boot/compressed/lzma_misc.c linux-lzma/arch/i386/boot/compressed/lzma_misc.c ---- linux-old/arch/i386/boot/compressed/lzma_misc.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux-lzma/arch/i386/boot/compressed/lzma_misc.c 2005-06-04 21:33:48.000000000 -0400 -@@ -0,0 +1,281 @@ -+/* -+ * lzma_misc.c -+ * -+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 -+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995 -+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 -+ * -+ * Decompress LZMA compressed vmlinuz -+ * Version 0.9 Copyright (c) Ming-Ching Tiew mctiew@yahoo.com -+ * Program adapted from misc.c for 2.6 kernel -+ * Forward ported to latest 2.6 version of misc.c by -+ * Felix Fietkau -+ */ -+ -+#undef CONFIG_PARAVIRT -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* WARNING!! -+ * This code is compiled with -fPIC and it is relocated dynamically -+ * at run time, but no relocation processing is performed. -+ * This means that it is not safe to place pointers in static structures. -+ */ -+ -+/* -+ * Getting to provable safe in place decompression is hard. -+ * Worst case behaviours need to be analized. -+ * Background information: -+ * -+ * The file layout is: -+ * magic[2] -+ * method[1] -+ * flags[1] -+ * timestamp[4] -+ * extraflags[1] -+ * os[1] -+ * compressed data blocks[N] -+ * crc[4] orig_len[4] -+ * -+ * resulting in 18 bytes of non compressed data overhead. -+ * -+ * Files divided into blocks -+ * 1 bit (last block flag) -+ * 2 bits (block type) -+ * -+ * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved. -+ * The smallest block type encoding is always used. -+ * -+ * stored: -+ * 32 bits length in bytes. -+ * -+ * fixed: -+ * magic fixed tree. -+ * symbols. -+ * -+ * dynamic: -+ * dynamic tree encoding. -+ * symbols. -+ * -+ * -+ * The buffer for decompression in place is the length of the -+ * uncompressed data, plus a small amount extra to keep the algorithm safe. -+ * The compressed data is placed at the end of the buffer. The output -+ * pointer is placed at the start of the buffer and the input pointer -+ * is placed where the compressed data starts. Problems will occur -+ * when the output pointer overruns the input pointer. -+ * -+ * The output pointer can only overrun the input pointer if the input -+ * pointer is moving faster than the output pointer. A condition only -+ * triggered by data whose compressed form is larger than the uncompressed -+ * form. -+ * -+ * The worst case at the block level is a growth of the compressed data -+ * of 5 bytes per 32767 bytes. -+ * -+ * The worst case internal to a compressed block is very hard to figure. -+ * The worst case can at least be boundined by having one bit that represents -+ * 32764 bytes and then all of the rest of the bytes representing the very -+ * very last byte. -+ * -+ * All of which is enough to compute an amount of extra data that is required -+ * to be safe. To avoid problems at the block level allocating 5 extra bytes -+ * per 32767 bytes of data is sufficient. To avoind problems internal to a block -+ * adding an extra 32767 bytes (the worst case uncompressed block size) is -+ * sufficient, to ensure that in the worst case the decompressed data for -+ * block will stop the byte before the compressed data for a block begins. -+ * To avoid problems with the compressed data's meta information an extra 18 -+ * bytes are needed. Leading to the formula: -+ * -+ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size. -+ * -+ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate. -+ * Adding 32768 instead of 32767 just makes for round numbers. -+ * Adding the decompressor_size is necessary as it musht live after all -+ * of the data as well. Last I measured the decompressor is about 14K. -+ * 10K of actuall data and 4K of bss. -+ * -+ */ -+ -+/* -+ * gzip declarations -+ */ -+ -+#define OF(args) args -+#define STATIC static -+ -+#undef memcpy -+ -+typedef unsigned char uch; -+typedef unsigned short ush; -+typedef unsigned long ulg; -+ -+#define WSIZE 0x80000000 /* Window size must be at least 32k, -+ * and a power of two -+ * We don't actually have a window just -+ * a huge output buffer so I report -+ * a 2G windows size, as that should -+ * always be larger than our output buffer. -+ */ -+ -+static uch *inbuf; /* input buffer */ -+static uch *window; /* Sliding window buffer, (and final output buffer) */ -+ -+static unsigned insize; /* valid bytes in inbuf */ -+static unsigned inptr; /* index of next byte to be processed in inbuf */ -+static unsigned long workspace; -+ -+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) -+ -+/* Diagnostic functions */ -+#ifdef DEBUG -+# define Assert(cond,msg) {if(!(cond)) error(msg);} -+# define Trace(x) fprintf x -+# define Tracev(x) {if (verbose) fprintf x ;} -+# define Tracevv(x) {if (verbose>1) fprintf x ;} -+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -+#else -+# define Assert(cond,msg) -+# define Trace(x) -+# define Tracev(x) -+# define Tracevv(x) -+# define Tracec(c,x) -+# define Tracecv(c,x) -+#endif -+ -+static int fill_inbuf(void); -+ -+/* -+ * This is set up by the setup-routine at boot-time -+ */ -+static unsigned char *real_mode; /* Pointer to real-mode data */ -+extern unsigned char input_data[]; -+extern int input_len; -+ -+static void error(char *x); -+static void *memcpy(void *dest, const void *src, unsigned n); -+ -+#ifdef CONFIG_X86_NUMAQ -+void *xquad_portio; -+#endif -+ -+static void* memcpy(void* dest, const void* src, unsigned n) -+{ -+ int i; -+ char *d = (char *)dest, *s = (char *)src; -+ -+ for (i=0;i ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff)) -+ error("Destination address too large"); -+#ifndef CONFIG_RELOCATABLE -+ if ((u32)output != LOAD_PHYSICAL_ADDR) -+ error("Wrong destination address"); -+#endif -+ -+ lzma_unzip(); -+ return; -+} -diff -Naur linux-old/arch/i386/boot/compressed/Makefile linux-lzma/arch/i386/boot/compressed/Makefile ---- linux-old/arch/i386/boot/compressed/Makefile 2005-06-04 21:53:40.000000000 -0400 -+++ linux-lzma/arch/i386/boot/compressed/Makefile 2005-06-05 00:25:23.000000000 -0400 -@@ -4,7 +4,7 @@ - # create a compressed vmlinux image from the original vmlinux - # - --targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o \ -+targets := vmlinux vmlinux.bin vmlinux.bin.lzma head.o lzma_misc.o piggy.o \ - vmlinux.bin.all vmlinux.relocs - EXTRA_AFLAGS := -traditional - -@@ -17,7 +17,7 @@ - $(call cc-option,-fno-stack-protector) - LDFLAGS := -m elf_i386 - --$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE -+$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE - $(call if_changed,ld) - @: - -@@ -37,14 +37,14 @@ - $(call if_changed,relocbin) - - ifdef CONFIG_RELOCATABLE --$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE -- $(call if_changed,gzip) -+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE -+ $(call if_changed,lzma) - else --$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE -- $(call if_changed,gzip) -+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE -+ $(call if_changed,lzma) - endif - - LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T - --$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE -+$(obj)/piggy.o: $(src)/vmlinux.scr $(obj)/vmlinux.bin.lzma FORCE - $(call if_changed,ld) -diff -urN linux-2.6.19.2/scripts/Makefile.lib linux-2.6.19.2.new/scripts/Makefile.lib ---- linux-2.6.19.2/scripts/Makefile.lib 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/scripts/Makefile.lib 2007-04-15 23:51:54.000000000 +0200 -@@ -162,4 +162,9 @@ - quiet_cmd_gzip = GZIP $@ - cmd_gzip = gzip -f -9 < $< > $@ - -- -+# LZMA -+# -+quiet_cmd_lzma = LZMA $@ -+cmd_lzma = bash -e scripts/lzma_kern $< $@ -lc7 -lp0 -pb0 -+# to use lzmacomp, -+# cmd_lzma = lzmacomp $< 700 > $@ -diff -u linux/scripts/lzma_kern linux/scripts/lzma_kern ---- linux/scripts/lzma_kern 2007-07-27 20:18:17.013014750 -0700 -+++ linux/scripts/lzma_kern 2007-07-27 20:18:17.013014750 -0700 -@@ -0,0 +1,4 @@ -+get-size() { echo "$5" ;} -+printf -v len '%.8x' "$(get-size $(ls -l "$1"))" -+lzma e "$@" -+echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"