From: Mieczyslaw Nalewaj Date: Wed, 13 Mar 2024 01:02:58 +0000 (+0100) Subject: ramips: 6.6: remove old patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4b8b7438f78346ccc3fc7393a3d026f63df0cdcd;p=openwrt%2Fstaging%2Fthess.git ramips: 6.6: remove old patches Remove patches for old kernel. Signed-off-by: Mieczyslaw Nalewaj --- diff --git a/target/linux/ramips/patches-6.6/003-v6.3-clk-ralink-fix-mt7621_gate_is_enabled-function.patch b/target/linux/ramips/patches-6.6/003-v6.3-clk-ralink-fix-mt7621_gate_is_enabled-function.patch deleted file mode 100644 index 4574f7977f..0000000000 --- a/target/linux/ramips/patches-6.6/003-v6.3-clk-ralink-fix-mt7621_gate_is_enabled-function.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 35dcae535afc153fa83f2fe51c0812536c192c58 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 6 Feb 2023 09:33:05 +0100 -Subject: [PATCH] clk: ralink: fix 'mt7621_gate_is_enabled()' function - -Compiling clock driver with CONFIG_UBSAN enabled shows the following trace: - -UBSAN: shift-out-of-bounds in drivers/clk/ralink/clk-mt7621.c:121:15 -shift exponent 131072 is too large for 32-bit type 'long unsigned int' -CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.86 #0 -Stack : ... - -Call Trace: -[<80009a58>] show_stack+0x38/0x118 -[<8045ce04>] dump_stack_lvl+0x60/0x80 -[<80458868>] ubsan_epilogue+0x10/0x54 -[<804590e0>] __ubsan_handle_shift_out_of_bounds+0x118/0x190 -[<804c9a10>] mt7621_gate_is_enabled+0x98/0xa0 -[<804bb774>] clk_core_is_enabled+0x34/0x90 -[<80aad73c>] clk_disable_unused_subtree+0x98/0x1e4 -[<80aad6d4>] clk_disable_unused_subtree+0x30/0x1e4 -[<80aad6d4>] clk_disable_unused_subtree+0x30/0x1e4 -[<80aad900>] clk_disable_unused+0x78/0x120 -[<80002030>] do_one_initcall+0x54/0x1f0 -[<80a922a4>] kernel_init_freeable+0x280/0x31c -[<808047c4>] kernel_init+0x20/0x118 -[<80003e58>] ret_from_kernel_thread+0x14/0x1c - -Shifting a value (131032) larger than the type (32 bit unsigned integer) -is undefined behaviour in C. - -The problem is in 'mt7621_gate_is_enabled()' function which is using the -'BIT()' kernel macro with the bit index for the clock gate to check if the -bit is set. When the clock gates structure is created driver is already -setting 'bit_idx' using 'BIT()' macro, so we are wrongly applying an extra -'BIT()' mask here. Removing it solve the problem and makes this function -correct. However when clock gating is correctly working, the kernel starts -disabling those clocks that are not requested. Some drivers for this SoC -are older than this clock driver itself. So to avoid the kernel to disable -clocks that have been enabled until now, we must apply 'CLK_IS_CRITICAL' -flag on gates initialization code. - -Fixes: 48df7a26f470 ("clk: ralink: add clock driver for mt7621 SoC") -Signed-off-by: Sergio Paracuellos -Link: https://lore.kernel.org/r/20230206083305.147582-1-sergio.paracuellos@gmail.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/ralink/clk-mt7621.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/clk/ralink/clk-mt7621.c -+++ b/drivers/clk/ralink/clk-mt7621.c -@@ -121,7 +121,7 @@ static int mt7621_gate_is_enabled(struct - if (regmap_read(sysc, SYSC_REG_CLKCFG1, &val)) - return 0; - -- return val & BIT(clk_gate->bit_idx); -+ return val & clk_gate->bit_idx; - } - - static const struct clk_ops mt7621_gate_ops = { -@@ -133,8 +133,14 @@ static const struct clk_ops mt7621_gate_ - static int mt7621_gate_ops_init(struct device *dev, - struct mt7621_gate *sclk) - { -+ /* -+ * There are drivers for this SoC that are older -+ * than clock driver and are not prepared for the clock. -+ * We don't want the kernel to disable anything so we -+ * add CLK_IS_CRITICAL flag here. -+ */ - struct clk_init_data init = { -- .flags = CLK_SET_RATE_PARENT, -+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, - .num_parents = 1, - .parent_names = &sclk->parent_name, - .ops = &mt7621_gate_ops, diff --git a/target/linux/ramips/patches-6.6/005-v6.5-01-dt-bindings-clock-add-mtmips-SoCs-system-controller.patch b/target/linux/ramips/patches-6.6/005-v6.5-01-dt-bindings-clock-add-mtmips-SoCs-system-controller.patch deleted file mode 100644 index 94784f7885..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-01-dt-bindings-clock-add-mtmips-SoCs-system-controller.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 612616e6381929e7f9e303f8b8ad3655cc101516 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:33 +0200 -Subject: [PATCH 1/9] dt-bindings: clock: add mtmips SoCs system controller - -Adds device tree binding documentation for system controller node present -in Mediatek MIPS and Ralink SOCs. This node is a clock and reset provider -for the rest of the world. This covers RT2880, RT3050, RT3052, RT3350, -RT3883, RT5350, MT7620, MT7628 and MT7688 SoCs. - -Reviewed-by: Rob Herring -Acked-by: Stephen Boyd -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - .../bindings/clock/mediatek,mtmips-sysc.yaml | 64 ++++++++++++++++++++++ - 1 file changed, 64 insertions(+) - create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml -@@ -0,0 +1,64 @@ -+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MTMIPS SoCs System Controller -+ -+maintainers: -+ - Sergio Paracuellos -+ -+description: | -+ MediaTek MIPS and Ralink SoCs provides a system controller to allow -+ to access to system control registers. These registers include clock -+ and reset related ones so this node is both clock and reset provider -+ for the rest of the world. -+ -+ These SoCs have an XTAL from where the cpu clock is -+ provided as well as derived clocks for the bus and the peripherals. -+ -+properties: -+ compatible: -+ items: -+ - enum: -+ - ralink,mt7620-sysc -+ - ralink,mt7628-sysc -+ - ralink,mt7688-sysc -+ - ralink,rt2880-sysc -+ - ralink,rt3050-sysc -+ - ralink,rt3052-sysc -+ - ralink,rt3352-sysc -+ - ralink,rt3883-sysc -+ - ralink,rt5350-sysc -+ - const: syscon -+ -+ reg: -+ maxItems: 1 -+ -+ '#clock-cells': -+ description: -+ The first cell indicates the clock number. -+ const: 1 -+ -+ '#reset-cells': -+ description: -+ The first cell indicates the reset bit within the register. -+ const: 1 -+ -+required: -+ - compatible -+ - reg -+ - '#clock-cells' -+ - '#reset-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ syscon@0 { -+ compatible = "ralink,rt5350-sysc", "syscon"; -+ reg = <0x0 0x100>; -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ }; diff --git a/target/linux/ramips/patches-6.6/005-v6.5-02-clk-ralink-add-clock-and-reset-driver-for-MTMIPS-SoC.patch b/target/linux/ramips/patches-6.6/005-v6.5-02-clk-ralink-add-clock-and-reset-driver-for-MTMIPS-SoC.patch deleted file mode 100644 index cef39978e0..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-02-clk-ralink-add-clock-and-reset-driver-for-MTMIPS-SoC.patch +++ /dev/null @@ -1,1221 +0,0 @@ -From 6f3b15586eef736831abe6a14f2a6906bc0dc074 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:34 +0200 -Subject: [PATCH 2/9] clk: ralink: add clock and reset driver for MTMIPS SoCs - -Until now, clock related code for old ralink SoCs was based in fixed clocks -using 'clk_register_fixed_rate' and 'clkdev_create' directly doing in code -and not using device tree at all for their definition. Including this driver -is an effort to be able to define proper clocks using device tree and also -cleaning all the clock and reset related code from 'arch/mips/ralink' dir. -This clock and reset driver covers all the ralink SoCs but MT7621 which is -the newest and provides gating and some differences that make it different -from its predecesors. It has its own driver since some time ago. The ralink -SoCs we are taking about are RT2880, RT3050, RT3052, RT3350, RT3352, RT3883, -RT5350, MT7620, MT7628 and MT7688. Mostly the code in this new driver has -been extracted from 'arch/mips/ralink' and cleanly put using kernel clock -driver APIs. The clock plans for this SoCs only talks about relation between -CPU frequency and BUS frequency. This relation is different depending on the -particular SoC. CPU clock is derived from XTAL frequencies. - -Depending on the SoC we have the following frequencies: -* RT2880 SoC: - - XTAL: 40 MHz. - - CPU: 250, 266, 280 or 300 MHz. - - BUS: CPU / 2 MHz. -* RT3050, RT3052, RT3350: - - XTAL: 40 MHz. - - CPU: 320 or 384 MHz. - - BUS: CPU / 3 MHz. -* RT3352: - - XTAL: 40 MHz. - - CPU: 384 or 400 MHz. - - BUS: CPU / 3 MHz. - - PERIPH: 40 MHz. -* RT3383: - - XTAL: 40 MHz. - - CPU: 250, 384, 480 or 500 MHz. - - BUS: Depends on RAM Type and CPU: - + RAM DDR2: 125. ELSE 83 MHz. - + RAM DDR2: 128. ELSE 96 MHz. - + RAM DDR2: 160. ELSE 120 MHz. - + RAM DDR2: 166. ELSE 125 MHz. -* RT5350: - - XTAL: 40 MHz. - - CPU: 300, 320 or 360 MHz. - - BUS: CPU / 3, CPU / 4, CPU / 3 MHz. - - PERIPH: 40 MHz. -* MT7628 and MT7688: - - XTAL: 20 MHz or 40 MHz. - - CPU: 575 or 580 MHz. - - BUS: CPU / 3. - - PCMI2S: 480 MHz. - - PERIPH: 40 MHz. -* MT7620: - - XTAL: 20 MHz or 40 MHz. - - PLL: XTAL, 480, 600 MHz. - - CPU: depends on PLL and some mult and dividers. - - BUS: depends on PLL and some mult and dividers. - - PERIPH: 40 or XTAL MHz. - -MT7620 is a bit more complex deriving CPU clock from a PLL and an bunch of -register reads and predividers. To derive CPU and BUS frequencies in the -MT7620 SoC 'mt7620_calc_rate()' helper is used. - -In the case XTAL can have different frequencies and we need a different -clock frequency for peripherals 'periph' clock in introduced. - -The rest of the peripherals present in the SoC just follow their parent -frequencies. - -With this information the clk driver will provide all the clock and reset -functionality from a set of hardcoded clocks allowing to define a nice -device tree without fixed clocks. - -Acked-by: Stephen Boyd -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - drivers/clk/ralink/Kconfig | 7 + - drivers/clk/ralink/Makefile | 1 + - drivers/clk/ralink/clk-mtmips.c | 1115 +++++++++++++++++++++++++++++++++++++++ - 3 files changed, 1123 insertions(+) - create mode 100644 drivers/clk/ralink/clk-mtmips.c - ---- a/drivers/clk/ralink/Kconfig -+++ b/drivers/clk/ralink/Kconfig -@@ -9,3 +9,10 @@ config CLK_MT7621 - select MFD_SYSCON - help - This driver supports MediaTek MT7621 basic clocks. -+ -+config CLK_MTMIPS -+ bool "Clock driver for MTMIPS SoCs" -+ depends on SOC_RT305X || SOC_RT288X || SOC_RT3883 || SOC_MT7620 || COMPILE_TEST -+ select MFD_SYSCON -+ help -+ This driver supports MTMIPS basic clocks. ---- a/drivers/clk/ralink/Makefile -+++ b/drivers/clk/ralink/Makefile -@@ -1,2 +1,3 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-$(CONFIG_CLK_MT7621) += clk-mt7621.o -+obj-$(CONFIG_CLK_MTMIPS) += clk-mtmips.o ---- /dev/null -+++ b/drivers/clk/ralink/clk-mtmips.c -@@ -0,0 +1,1115 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * MTMIPS SoCs Clock Driver -+ * Author: Sergio Paracuellos -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Configuration registers */ -+#define SYSC_REG_SYSTEM_CONFIG 0x10 -+#define SYSC_REG_CLKCFG0 0x2c -+#define SYSC_REG_RESET_CTRL 0x34 -+#define SYSC_REG_CPU_SYS_CLKCFG 0x3c -+#define SYSC_REG_CPLL_CONFIG0 0x54 -+#define SYSC_REG_CPLL_CONFIG1 0x58 -+ -+/* RT2880 SoC */ -+#define RT2880_CONFIG_CPUCLK_SHIFT 20 -+#define RT2880_CONFIG_CPUCLK_MASK 0x3 -+#define RT2880_CONFIG_CPUCLK_250 0x0 -+#define RT2880_CONFIG_CPUCLK_266 0x1 -+#define RT2880_CONFIG_CPUCLK_280 0x2 -+#define RT2880_CONFIG_CPUCLK_300 0x3 -+ -+/* RT305X SoC */ -+#define RT305X_SYSCFG_CPUCLK_SHIFT 18 -+#define RT305X_SYSCFG_CPUCLK_MASK 0x1 -+#define RT305X_SYSCFG_CPUCLK_LOW 0x0 -+#define RT305X_SYSCFG_CPUCLK_HIGH 0x1 -+ -+/* RT3352 SoC */ -+#define RT3352_SYSCFG0_CPUCLK_SHIFT 8 -+#define RT3352_SYSCFG0_CPUCLK_MASK 0x1 -+#define RT3352_SYSCFG0_CPUCLK_LOW 0x0 -+#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1 -+ -+/* RT3383 SoC */ -+#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17) -+#define RT3883_SYSCFG0_CPUCLK_SHIFT 8 -+#define RT3883_SYSCFG0_CPUCLK_MASK 0x3 -+#define RT3883_SYSCFG0_CPUCLK_250 0x0 -+#define RT3883_SYSCFG0_CPUCLK_384 0x1 -+#define RT3883_SYSCFG0_CPUCLK_480 0x2 -+#define RT3883_SYSCFG0_CPUCLK_500 0x3 -+ -+/* RT5350 SoC */ -+#define RT5350_CLKCFG0_XTAL_SEL BIT(20) -+#define RT5350_SYSCFG0_CPUCLK_SHIFT 8 -+#define RT5350_SYSCFG0_CPUCLK_MASK 0x3 -+#define RT5350_SYSCFG0_CPUCLK_360 0x0 -+#define RT5350_SYSCFG0_CPUCLK_320 0x2 -+#define RT5350_SYSCFG0_CPUCLK_300 0x3 -+ -+/* MT7620 and MT76x8 SoCs */ -+#define MT7620_XTAL_FREQ_SEL BIT(6) -+#define CPLL_CFG0_SW_CFG BIT(31) -+#define CPLL_CFG0_PLL_MULT_RATIO_SHIFT 16 -+#define CPLL_CFG0_PLL_MULT_RATIO_MASK 0x7 -+#define CPLL_CFG0_LC_CURFCK BIT(15) -+#define CPLL_CFG0_BYPASS_REF_CLK BIT(14) -+#define CPLL_CFG0_PLL_DIV_RATIO_SHIFT 10 -+#define CPLL_CFG0_PLL_DIV_RATIO_MASK 0x3 -+#define CPLL_CFG1_CPU_AUX1 BIT(25) -+#define CPLL_CFG1_CPU_AUX0 BIT(24) -+#define CLKCFG0_PERI_CLK_SEL BIT(4) -+#define CPU_SYS_CLKCFG_OCP_RATIO_SHIFT 16 -+#define CPU_SYS_CLKCFG_OCP_RATIO_MASK 0xf -+#define CPU_SYS_CLKCFG_OCP_RATIO_1 0 /* 1:1 (Reserved) */ -+#define CPU_SYS_CLKCFG_OCP_RATIO_1_5 1 /* 1:1.5 (Reserved) */ -+#define CPU_SYS_CLKCFG_OCP_RATIO_2 2 /* 1:2 */ -+#define CPU_SYS_CLKCFG_OCP_RATIO_2_5 3 /* 1:2.5 (Reserved) */ -+#define CPU_SYS_CLKCFG_OCP_RATIO_3 4 /* 1:3 */ -+#define CPU_SYS_CLKCFG_OCP_RATIO_3_5 5 /* 1:3.5 (Reserved) */ -+#define CPU_SYS_CLKCFG_OCP_RATIO_4 6 /* 1:4 */ -+#define CPU_SYS_CLKCFG_OCP_RATIO_5 7 /* 1:5 */ -+#define CPU_SYS_CLKCFG_OCP_RATIO_10 8 /* 1:10 */ -+#define CPU_SYS_CLKCFG_CPU_FDIV_SHIFT 8 -+#define CPU_SYS_CLKCFG_CPU_FDIV_MASK 0x1f -+#define CPU_SYS_CLKCFG_CPU_FFRAC_SHIFT 0 -+#define CPU_SYS_CLKCFG_CPU_FFRAC_MASK 0x1f -+ -+/* clock scaling */ -+#define CLKCFG_FDIV_MASK 0x1f00 -+#define CLKCFG_FDIV_USB_VAL 0x0300 -+#define CLKCFG_FFRAC_MASK 0x001f -+#define CLKCFG_FFRAC_USB_VAL 0x0003 -+ -+struct mtmips_clk; -+struct mtmips_clk_fixed; -+struct mtmips_clk_factor; -+ -+struct mtmips_clk_data { -+ struct mtmips_clk *clk_base; -+ size_t num_clk_base; -+ struct mtmips_clk_fixed *clk_fixed; -+ size_t num_clk_fixed; -+ struct mtmips_clk_factor *clk_factor; -+ size_t num_clk_factor; -+ struct mtmips_clk *clk_periph; -+ size_t num_clk_periph; -+}; -+ -+struct mtmips_clk_priv { -+ struct regmap *sysc; -+ const struct mtmips_clk_data *data; -+}; -+ -+struct mtmips_clk { -+ struct clk_hw hw; -+ struct mtmips_clk_priv *priv; -+}; -+ -+struct mtmips_clk_fixed { -+ const char *name; -+ const char *parent; -+ unsigned long rate; -+ struct clk_hw *hw; -+}; -+ -+struct mtmips_clk_factor { -+ const char *name; -+ const char *parent; -+ int mult; -+ int div; -+ unsigned long flags; -+ struct clk_hw *hw; -+}; -+ -+static unsigned long mtmips_pherip_clk_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ return parent_rate; -+} -+ -+static const struct clk_ops mtmips_periph_clk_ops = { -+ .recalc_rate = mtmips_pherip_clk_rate, -+}; -+ -+#define CLK_PERIPH(_name, _parent) { \ -+ .init = &(const struct clk_init_data) { \ -+ .name = _name, \ -+ .ops = &mtmips_periph_clk_ops, \ -+ .parent_data = &(const struct clk_parent_data) {\ -+ .name = _parent, \ -+ .fw_name = _parent \ -+ }, \ -+ .num_parents = 1, \ -+ /* \ -+ * There are drivers for these SoCs that are \ -+ * older than clock driver and are not prepared \ -+ * for the clock. We don't want the kernel to \ -+ * disable anything so we add CLK_IS_CRITICAL \ -+ * flag here. \ -+ */ \ -+ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL \ -+ }, \ -+} -+ -+static struct mtmips_clk rt2880_pherip_clks[] = { -+ { CLK_PERIPH("300100.timer", "bus") }, -+ { CLK_PERIPH("300120.watchdog", "bus") }, -+ { CLK_PERIPH("300500.uart", "bus") }, -+ { CLK_PERIPH("300900.i2c", "bus") }, -+ { CLK_PERIPH("300c00.uartlite", "bus") }, -+ { CLK_PERIPH("400000.ethernet", "bus") }, -+ { CLK_PERIPH("480000.wmac", "xtal") } -+}; -+ -+static struct mtmips_clk rt305x_pherip_clks[] = { -+ { CLK_PERIPH("10000100.timer", "bus") }, -+ { CLK_PERIPH("10000120.watchdog", "bus") }, -+ { CLK_PERIPH("10000500.uart", "bus") }, -+ { CLK_PERIPH("10000900.i2c", "bus") }, -+ { CLK_PERIPH("10000a00.i2s", "bus") }, -+ { CLK_PERIPH("10000b00.spi", "bus") }, -+ { CLK_PERIPH("10000b40.spi", "bus") }, -+ { CLK_PERIPH("10000c00.uartlite", "bus") }, -+ { CLK_PERIPH("10100000.ethernet", "bus") }, -+ { CLK_PERIPH("10180000.wmac", "xtal") } -+}; -+ -+static struct mtmips_clk rt5350_pherip_clks[] = { -+ { CLK_PERIPH("10000100.timer", "bus") }, -+ { CLK_PERIPH("10000120.watchdog", "bus") }, -+ { CLK_PERIPH("10000500.uart", "periph") }, -+ { CLK_PERIPH("10000900.i2c", "periph") }, -+ { CLK_PERIPH("10000a00.i2s", "periph") }, -+ { CLK_PERIPH("10000b00.spi", "bus") }, -+ { CLK_PERIPH("10000b40.spi", "bus") }, -+ { CLK_PERIPH("10000c00.uartlite", "periph") }, -+ { CLK_PERIPH("10100000.ethernet", "bus") }, -+ { CLK_PERIPH("10180000.wmac", "xtal") } -+}; -+ -+static struct mtmips_clk mt7620_pherip_clks[] = { -+ { CLK_PERIPH("10000100.timer", "periph") }, -+ { CLK_PERIPH("10000120.watchdog", "periph") }, -+ { CLK_PERIPH("10000500.uart", "periph") }, -+ { CLK_PERIPH("10000900.i2c", "periph") }, -+ { CLK_PERIPH("10000a00.i2s", "periph") }, -+ { CLK_PERIPH("10000b00.spi", "bus") }, -+ { CLK_PERIPH("10000b40.spi", "bus") }, -+ { CLK_PERIPH("10000c00.uartlite", "periph") }, -+ { CLK_PERIPH("10180000.wmac", "xtal") } -+}; -+ -+static struct mtmips_clk mt76x8_pherip_clks[] = { -+ { CLK_PERIPH("10000100.timer", "periph") }, -+ { CLK_PERIPH("10000120.watchdog", "periph") }, -+ { CLK_PERIPH("10000900.i2c", "periph") }, -+ { CLK_PERIPH("10000a00.i2s", "pcmi2s") }, -+ { CLK_PERIPH("10000b00.spi", "bus") }, -+ { CLK_PERIPH("10000b40.spi", "bus") }, -+ { CLK_PERIPH("10000c00.uart0", "periph") }, -+ { CLK_PERIPH("10000d00.uart1", "periph") }, -+ { CLK_PERIPH("10000e00.uart2", "periph") }, -+ { CLK_PERIPH("10300000.wmac", "xtal") } -+}; -+ -+static int mtmips_register_pherip_clocks(struct device_node *np, -+ struct clk_hw_onecell_data *clk_data, -+ struct mtmips_clk_priv *priv) -+{ -+ struct clk_hw **hws = clk_data->hws; -+ struct mtmips_clk *sclk; -+ size_t idx_start = priv->data->num_clk_base + priv->data->num_clk_fixed + -+ priv->data->num_clk_factor; -+ int ret, i; -+ -+ for (i = 0; i < priv->data->num_clk_periph; i++) { -+ int idx = idx_start + i; -+ -+ sclk = &priv->data->clk_periph[i]; -+ ret = of_clk_hw_register(np, &sclk->hw); -+ if (ret) { -+ pr_err("Couldn't register peripheral clock %d\n", idx); -+ goto err_clk_unreg; -+ } -+ -+ hws[idx] = &sclk->hw; -+ } -+ -+ return 0; -+ -+err_clk_unreg: -+ while (--i >= 0) { -+ sclk = &priv->data->clk_periph[i]; -+ clk_hw_unregister(&sclk->hw); -+ } -+ return ret; -+} -+ -+#define CLK_FIXED(_name, _parent, _rate) \ -+ { \ -+ .name = _name, \ -+ .parent = _parent, \ -+ .rate = _rate \ -+ } -+ -+static struct mtmips_clk_fixed rt305x_fixed_clocks[] = { -+ CLK_FIXED("xtal", NULL, 40000000) -+}; -+ -+static struct mtmips_clk_fixed rt3352_fixed_clocks[] = { -+ CLK_FIXED("periph", "xtal", 40000000) -+}; -+ -+static struct mtmips_clk_fixed mt76x8_fixed_clocks[] = { -+ CLK_FIXED("pcmi2s", "xtal", 480000000), -+ CLK_FIXED("periph", "xtal", 40000000) -+}; -+ -+static int mtmips_register_fixed_clocks(struct clk_hw_onecell_data *clk_data, -+ struct mtmips_clk_priv *priv) -+{ -+ struct clk_hw **hws = clk_data->hws; -+ struct mtmips_clk_fixed *sclk; -+ size_t idx_start = priv->data->num_clk_base; -+ int ret, i; -+ -+ for (i = 0; i < priv->data->num_clk_fixed; i++) { -+ int idx = idx_start + i; -+ -+ sclk = &priv->data->clk_fixed[i]; -+ sclk->hw = clk_hw_register_fixed_rate(NULL, sclk->name, -+ sclk->parent, 0, -+ sclk->rate); -+ if (IS_ERR(sclk->hw)) { -+ pr_err("Couldn't register fixed clock %d\n", idx); -+ goto err_clk_unreg; -+ } -+ -+ hws[idx] = sclk->hw; -+ } -+ -+ return 0; -+ -+err_clk_unreg: -+ while (--i >= 0) { -+ sclk = &priv->data->clk_fixed[i]; -+ clk_hw_unregister_fixed_rate(sclk->hw); -+ } -+ return ret; -+} -+ -+#define CLK_FACTOR(_name, _parent, _mult, _div) \ -+ { \ -+ .name = _name, \ -+ .parent = _parent, \ -+ .mult = _mult, \ -+ .div = _div, \ -+ .flags = CLK_SET_RATE_PARENT \ -+ } -+ -+static struct mtmips_clk_factor rt2880_factor_clocks[] = { -+ CLK_FACTOR("bus", "cpu", 1, 2) -+}; -+ -+static struct mtmips_clk_factor rt305x_factor_clocks[] = { -+ CLK_FACTOR("bus", "cpu", 1, 3) -+}; -+ -+static int mtmips_register_factor_clocks(struct clk_hw_onecell_data *clk_data, -+ struct mtmips_clk_priv *priv) -+{ -+ struct clk_hw **hws = clk_data->hws; -+ struct mtmips_clk_factor *sclk; -+ size_t idx_start = priv->data->num_clk_base + priv->data->num_clk_fixed; -+ int ret, i; -+ -+ for (i = 0; i < priv->data->num_clk_factor; i++) { -+ int idx = idx_start + i; -+ -+ sclk = &priv->data->clk_factor[i]; -+ sclk->hw = clk_hw_register_fixed_factor(NULL, sclk->name, -+ sclk->parent, sclk->flags, -+ sclk->mult, sclk->div); -+ if (IS_ERR(sclk->hw)) { -+ pr_err("Couldn't register factor clock %d\n", idx); -+ goto err_clk_unreg; -+ } -+ -+ hws[idx] = sclk->hw; -+ } -+ -+ return 0; -+ -+err_clk_unreg: -+ while (--i >= 0) { -+ sclk = &priv->data->clk_factor[i]; -+ clk_hw_unregister_fixed_factor(sclk->hw); -+ } -+ return ret; -+} -+ -+static inline struct mtmips_clk *to_mtmips_clk(struct clk_hw *hw) -+{ -+ return container_of(hw, struct mtmips_clk, hw); -+} -+ -+static unsigned long rt5350_xtal_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 val; -+ -+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &val); -+ if (!(val & RT5350_CLKCFG0_XTAL_SEL)) -+ return 20000000; -+ -+ return 40000000; -+} -+ -+static unsigned long rt5350_cpu_recalc_rate(struct clk_hw *hw, -+ unsigned long xtal_clk) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ -+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t); -+ t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) & RT5350_SYSCFG0_CPUCLK_MASK; -+ -+ switch (t) { -+ case RT5350_SYSCFG0_CPUCLK_360: -+ return 360000000; -+ case RT5350_SYSCFG0_CPUCLK_320: -+ return 320000000; -+ case RT5350_SYSCFG0_CPUCLK_300: -+ return 300000000; -+ default: -+ BUG(); -+ } -+} -+ -+static unsigned long rt5350_bus_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ if (parent_rate == 320000000) -+ return parent_rate / 4; -+ -+ return parent_rate / 3; -+} -+ -+static unsigned long rt3352_cpu_recalc_rate(struct clk_hw *hw, -+ unsigned long xtal_clk) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ -+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t); -+ t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) & RT3352_SYSCFG0_CPUCLK_MASK; -+ -+ switch (t) { -+ case RT3352_SYSCFG0_CPUCLK_LOW: -+ return 384000000; -+ case RT3352_SYSCFG0_CPUCLK_HIGH: -+ return 400000000; -+ default: -+ BUG(); -+ } -+} -+ -+static unsigned long rt305x_cpu_recalc_rate(struct clk_hw *hw, -+ unsigned long xtal_clk) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ -+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t); -+ t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & RT305X_SYSCFG_CPUCLK_MASK; -+ -+ switch (t) { -+ case RT305X_SYSCFG_CPUCLK_LOW: -+ return 320000000; -+ case RT305X_SYSCFG_CPUCLK_HIGH: -+ return 384000000; -+ default: -+ BUG(); -+ } -+} -+ -+static unsigned long rt3883_cpu_recalc_rate(struct clk_hw *hw, -+ unsigned long xtal_clk) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ -+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t); -+ t = (t >> RT3883_SYSCFG0_CPUCLK_SHIFT) & RT3883_SYSCFG0_CPUCLK_MASK; -+ -+ switch (t) { -+ case RT3883_SYSCFG0_CPUCLK_250: -+ return 250000000; -+ case RT3883_SYSCFG0_CPUCLK_384: -+ return 384000000; -+ case RT3883_SYSCFG0_CPUCLK_480: -+ return 480000000; -+ case RT3883_SYSCFG0_CPUCLK_500: -+ return 500000000; -+ default: -+ BUG(); -+ } -+} -+ -+static unsigned long rt3883_bus_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 ddr2; -+ u32 t; -+ -+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t); -+ ddr2 = t & RT3883_SYSCFG0_DRAM_TYPE_DDR2; -+ -+ switch (parent_rate) { -+ case 250000000: -+ return (ddr2) ? 125000000 : 83000000; -+ case 384000000: -+ return (ddr2) ? 128000000 : 96000000; -+ case 480000000: -+ return (ddr2) ? 160000000 : 120000000; -+ case 500000000: -+ return (ddr2) ? 166000000 : 125000000; -+ default: -+ WARN_ON_ONCE(parent_rate == 0); -+ return parent_rate / 4; -+ } -+} -+ -+static unsigned long rt2880_cpu_recalc_rate(struct clk_hw *hw, -+ unsigned long xtal_clk) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ -+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t); -+ t = (t >> RT2880_CONFIG_CPUCLK_SHIFT) & RT2880_CONFIG_CPUCLK_MASK; -+ -+ switch (t) { -+ case RT2880_CONFIG_CPUCLK_250: -+ return 250000000; -+ case RT2880_CONFIG_CPUCLK_266: -+ return 266000000; -+ case RT2880_CONFIG_CPUCLK_280: -+ return 280000000; -+ case RT2880_CONFIG_CPUCLK_300: -+ return 300000000; -+ default: -+ BUG(); -+ } -+} -+ -+static u32 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) -+{ -+ u64 t; -+ -+ t = ref_rate; -+ t *= mul; -+ t = div_u64(t, div); -+ -+ return t; -+} -+ -+static unsigned long mt7620_pll_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ static const u32 clk_divider[] = { 2, 3, 4, 8 }; -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ unsigned long cpu_pll; -+ u32 t; -+ u32 mul; -+ u32 div; -+ -+ regmap_read(sysc, SYSC_REG_CPLL_CONFIG0, &t); -+ if (t & CPLL_CFG0_BYPASS_REF_CLK) { -+ cpu_pll = parent_rate; -+ } else if ((t & CPLL_CFG0_SW_CFG) == 0) { -+ cpu_pll = 600000000; -+ } else { -+ mul = (t >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) & -+ CPLL_CFG0_PLL_MULT_RATIO_MASK; -+ mul += 24; -+ if (t & CPLL_CFG0_LC_CURFCK) -+ mul *= 2; -+ -+ div = (t >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) & -+ CPLL_CFG0_PLL_DIV_RATIO_MASK; -+ -+ WARN_ON_ONCE(div >= ARRAY_SIZE(clk_divider)); -+ -+ cpu_pll = mt7620_calc_rate(parent_rate, mul, clk_divider[div]); -+ } -+ -+ regmap_read(sysc, SYSC_REG_CPLL_CONFIG1, &t); -+ if (t & CPLL_CFG1_CPU_AUX1) -+ return parent_rate; -+ -+ if (t & CPLL_CFG1_CPU_AUX0) -+ return 480000000; -+ -+ return cpu_pll; -+} -+ -+static unsigned long mt7620_cpu_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ u32 mul; -+ u32 div; -+ -+ regmap_read(sysc, SYSC_REG_CPU_SYS_CLKCFG, &t); -+ mul = t & CPU_SYS_CLKCFG_CPU_FFRAC_MASK; -+ div = (t >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) & -+ CPU_SYS_CLKCFG_CPU_FDIV_MASK; -+ -+ return mt7620_calc_rate(parent_rate, mul, div); -+} -+ -+static unsigned long mt7620_bus_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ static const u32 ocp_dividers[16] = { -+ [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2, -+ [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3, -+ [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4, -+ [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5, -+ [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10, -+ }; -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ u32 ocp_ratio; -+ u32 div; -+ -+ regmap_read(sysc, SYSC_REG_CPU_SYS_CLKCFG, &t); -+ ocp_ratio = (t >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) & -+ CPU_SYS_CLKCFG_OCP_RATIO_MASK; -+ -+ if (WARN_ON_ONCE(ocp_ratio >= ARRAY_SIZE(ocp_dividers))) -+ return parent_rate; -+ -+ div = ocp_dividers[ocp_ratio]; -+ -+ if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio)) -+ return parent_rate; -+ -+ return parent_rate / div; -+} -+ -+static unsigned long mt7620_periph_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ -+ regmap_read(sysc, SYSC_REG_CLKCFG0, &t); -+ if (t & CLKCFG0_PERI_CLK_SEL) -+ return parent_rate; -+ -+ return 40000000; -+} -+ -+static unsigned long mt76x8_xtal_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct mtmips_clk *clk = to_mtmips_clk(hw); -+ struct regmap *sysc = clk->priv->sysc; -+ u32 t; -+ -+ regmap_read(sysc, SYSC_REG_SYSTEM_CONFIG, &t); -+ if (t & MT7620_XTAL_FREQ_SEL) -+ return 40000000; -+ -+ return 20000000; -+} -+ -+static unsigned long mt76x8_cpu_recalc_rate(struct clk_hw *hw, -+ unsigned long xtal_clk) -+{ -+ if (xtal_clk == 40000000) -+ return 580000000; -+ -+ return 575000000; -+} -+ -+#define CLK_BASE(_name, _parent, _recalc) { \ -+ .init = &(const struct clk_init_data) { \ -+ .name = _name, \ -+ .ops = &(const struct clk_ops) { \ -+ .recalc_rate = _recalc, \ -+ }, \ -+ .parent_data = &(const struct clk_parent_data) { \ -+ .name = _parent, \ -+ .fw_name = _parent \ -+ }, \ -+ .num_parents = _parent ? 1 : 0 \ -+ }, \ -+} -+ -+static struct mtmips_clk rt2880_clks_base[] = { -+ { CLK_BASE("cpu", "xtal", rt2880_cpu_recalc_rate) } -+}; -+ -+static struct mtmips_clk rt305x_clks_base[] = { -+ { CLK_BASE("cpu", "xtal", rt305x_cpu_recalc_rate) } -+}; -+ -+static struct mtmips_clk rt3352_clks_base[] = { -+ { CLK_BASE("xtal", NULL, rt5350_xtal_recalc_rate) }, -+ { CLK_BASE("cpu", "xtal", rt3352_cpu_recalc_rate) } -+}; -+ -+static struct mtmips_clk rt3883_clks_base[] = { -+ { CLK_BASE("cpu", "xtal", rt3883_cpu_recalc_rate) }, -+ { CLK_BASE("bus", "cpu", rt3883_bus_recalc_rate) } -+}; -+ -+static struct mtmips_clk rt5350_clks_base[] = { -+ { CLK_BASE("xtal", NULL, rt5350_xtal_recalc_rate) }, -+ { CLK_BASE("cpu", "xtal", rt5350_cpu_recalc_rate) }, -+ { CLK_BASE("bus", "cpu", rt5350_bus_recalc_rate) } -+}; -+ -+static struct mtmips_clk mt7620_clks_base[] = { -+ { CLK_BASE("xtal", NULL, mt76x8_xtal_recalc_rate) }, -+ { CLK_BASE("pll", "xtal", mt7620_pll_recalc_rate) }, -+ { CLK_BASE("cpu", "pll", mt7620_cpu_recalc_rate) }, -+ { CLK_BASE("periph", "xtal", mt7620_periph_recalc_rate) }, -+ { CLK_BASE("bus", "cpu", mt7620_bus_recalc_rate) } -+}; -+ -+static struct mtmips_clk mt76x8_clks_base[] = { -+ { CLK_BASE("xtal", NULL, mt76x8_xtal_recalc_rate) }, -+ { CLK_BASE("cpu", "xtal", mt76x8_cpu_recalc_rate) } -+}; -+ -+static int mtmips_register_clocks(struct device_node *np, -+ struct clk_hw_onecell_data *clk_data, -+ struct mtmips_clk_priv *priv) -+{ -+ struct clk_hw **hws = clk_data->hws; -+ struct mtmips_clk *sclk; -+ int ret, i; -+ -+ for (i = 0; i < priv->data->num_clk_base; i++) { -+ sclk = &priv->data->clk_base[i]; -+ sclk->priv = priv; -+ ret = of_clk_hw_register(np, &sclk->hw); -+ if (ret) { -+ pr_err("Couldn't register top clock %i\n", i); -+ goto err_clk_unreg; -+ } -+ -+ hws[i] = &sclk->hw; -+ } -+ -+ return 0; -+ -+err_clk_unreg: -+ while (--i >= 0) { -+ sclk = &priv->data->clk_base[i]; -+ clk_hw_unregister(&sclk->hw); -+ } -+ return ret; -+} -+ -+static const struct mtmips_clk_data rt2880_clk_data = { -+ .clk_base = rt2880_clks_base, -+ .num_clk_base = ARRAY_SIZE(rt2880_clks_base), -+ .clk_fixed = rt305x_fixed_clocks, -+ .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks), -+ .clk_factor = rt2880_factor_clocks, -+ .num_clk_factor = ARRAY_SIZE(rt2880_factor_clocks), -+ .clk_periph = rt2880_pherip_clks, -+ .num_clk_periph = ARRAY_SIZE(rt2880_pherip_clks), -+}; -+ -+static const struct mtmips_clk_data rt305x_clk_data = { -+ .clk_base = rt305x_clks_base, -+ .num_clk_base = ARRAY_SIZE(rt305x_clks_base), -+ .clk_fixed = rt305x_fixed_clocks, -+ .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks), -+ .clk_factor = rt305x_factor_clocks, -+ .num_clk_factor = ARRAY_SIZE(rt305x_factor_clocks), -+ .clk_periph = rt305x_pherip_clks, -+ .num_clk_periph = ARRAY_SIZE(rt305x_pherip_clks), -+}; -+ -+static const struct mtmips_clk_data rt3352_clk_data = { -+ .clk_base = rt3352_clks_base, -+ .num_clk_base = ARRAY_SIZE(rt3352_clks_base), -+ .clk_fixed = rt3352_fixed_clocks, -+ .num_clk_fixed = ARRAY_SIZE(rt3352_fixed_clocks), -+ .clk_factor = rt305x_factor_clocks, -+ .num_clk_factor = ARRAY_SIZE(rt305x_factor_clocks), -+ .clk_periph = rt5350_pherip_clks, -+ .num_clk_periph = ARRAY_SIZE(rt5350_pherip_clks), -+}; -+ -+static const struct mtmips_clk_data rt3883_clk_data = { -+ .clk_base = rt3883_clks_base, -+ .num_clk_base = ARRAY_SIZE(rt3883_clks_base), -+ .clk_fixed = rt305x_fixed_clocks, -+ .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks), -+ .clk_factor = NULL, -+ .num_clk_factor = 0, -+ .clk_periph = rt5350_pherip_clks, -+ .num_clk_periph = ARRAY_SIZE(rt5350_pherip_clks), -+}; -+ -+static const struct mtmips_clk_data rt5350_clk_data = { -+ .clk_base = rt5350_clks_base, -+ .num_clk_base = ARRAY_SIZE(rt5350_clks_base), -+ .clk_fixed = rt3352_fixed_clocks, -+ .num_clk_fixed = ARRAY_SIZE(rt3352_fixed_clocks), -+ .clk_factor = NULL, -+ .num_clk_factor = 0, -+ .clk_periph = rt5350_pherip_clks, -+ .num_clk_periph = ARRAY_SIZE(rt5350_pherip_clks), -+}; -+ -+static const struct mtmips_clk_data mt7620_clk_data = { -+ .clk_base = mt7620_clks_base, -+ .num_clk_base = ARRAY_SIZE(mt7620_clks_base), -+ .clk_fixed = NULL, -+ .num_clk_fixed = 0, -+ .clk_factor = NULL, -+ .num_clk_factor = 0, -+ .clk_periph = mt7620_pherip_clks, -+ .num_clk_periph = ARRAY_SIZE(mt7620_pherip_clks), -+}; -+ -+static const struct mtmips_clk_data mt76x8_clk_data = { -+ .clk_base = mt76x8_clks_base, -+ .num_clk_base = ARRAY_SIZE(mt76x8_clks_base), -+ .clk_fixed = mt76x8_fixed_clocks, -+ .num_clk_fixed = ARRAY_SIZE(mt76x8_fixed_clocks), -+ .clk_factor = rt305x_factor_clocks, -+ .num_clk_factor = ARRAY_SIZE(rt305x_factor_clocks), -+ .clk_periph = mt76x8_pherip_clks, -+ .num_clk_periph = ARRAY_SIZE(mt76x8_pherip_clks), -+}; -+ -+static const struct of_device_id mtmips_of_match[] = { -+ { -+ .compatible = "ralink,rt2880-sysc", -+ .data = &rt2880_clk_data, -+ }, -+ { -+ .compatible = "ralink,rt3050-sysc", -+ .data = &rt305x_clk_data, -+ }, -+ { -+ .compatible = "ralink,rt3052-sysc", -+ .data = &rt305x_clk_data, -+ }, -+ { -+ .compatible = "ralink,rt3352-sysc", -+ .data = &rt3352_clk_data, -+ }, -+ { -+ .compatible = "ralink,rt3883-sysc", -+ .data = &rt3883_clk_data, -+ }, -+ { -+ .compatible = "ralink,rt5350-sysc", -+ .data = &rt5350_clk_data, -+ }, -+ { -+ .compatible = "ralink,mt7620-sysc", -+ .data = &mt7620_clk_data, -+ }, -+ { -+ .compatible = "ralink,mt7628-sysc", -+ .data = &mt76x8_clk_data, -+ }, -+ { -+ .compatible = "ralink,mt7688-sysc", -+ .data = &mt76x8_clk_data, -+ }, -+ {} -+}; -+ -+static void __init mtmips_clk_regs_init(struct device_node *node, -+ struct mtmips_clk_priv *priv) -+{ -+ u32 t; -+ -+ if (!of_device_is_compatible(node, "ralink,mt7620-sysc")) -+ return; -+ -+ /* -+ * When the CPU goes into sleep mode, the BUS -+ * clock will be too low for USB to function properly. -+ * Adjust the busses fractional divider to fix this -+ */ -+ regmap_read(priv->sysc, SYSC_REG_CPU_SYS_CLKCFG, &t); -+ t &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); -+ t |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; -+ regmap_write(priv->sysc, SYSC_REG_CPU_SYS_CLKCFG, t); -+} -+ -+static void __init mtmips_clk_init(struct device_node *node) -+{ -+ const struct of_device_id *match; -+ const struct mtmips_clk_data *data; -+ struct mtmips_clk_priv *priv; -+ struct clk_hw_onecell_data *clk_data; -+ int ret, i, count; -+ -+ priv = kzalloc(sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return; -+ -+ priv->sysc = syscon_node_to_regmap(node); -+ if (IS_ERR(priv->sysc)) { -+ pr_err("Could not get sysc syscon regmap\n"); -+ goto free_clk_priv; -+ } -+ -+ mtmips_clk_regs_init(node, priv); -+ -+ match = of_match_node(mtmips_of_match, node); -+ if (WARN_ON(!match)) -+ return; -+ -+ data = match->data; -+ priv->data = data; -+ count = priv->data->num_clk_base + priv->data->num_clk_fixed + -+ priv->data->num_clk_factor + priv->data->num_clk_periph; -+ clk_data = kzalloc(struct_size(clk_data, hws, count), GFP_KERNEL); -+ if (!clk_data) -+ goto free_clk_priv; -+ -+ ret = mtmips_register_clocks(node, clk_data, priv); -+ if (ret) { -+ pr_err("Couldn't register top clocks\n"); -+ goto free_clk_data; -+ } -+ -+ ret = mtmips_register_fixed_clocks(clk_data, priv); -+ if (ret) { -+ pr_err("Couldn't register fixed clocks\n"); -+ goto unreg_clk_top; -+ } -+ -+ ret = mtmips_register_factor_clocks(clk_data, priv); -+ if (ret) { -+ pr_err("Couldn't register factor clocks\n"); -+ goto unreg_clk_fixed; -+ } -+ -+ ret = mtmips_register_pherip_clocks(node, clk_data, priv); -+ if (ret) { -+ pr_err("Couldn't register peripheral clocks\n"); -+ goto unreg_clk_factor; -+ } -+ -+ clk_data->num = count; -+ -+ ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -+ if (ret) { -+ pr_err("Couldn't add clk hw provider\n"); -+ goto unreg_clk_periph; -+ } -+ -+ return; -+ -+unreg_clk_periph: -+ for (i = 0; i < priv->data->num_clk_periph; i++) { -+ struct mtmips_clk *sclk = &priv->data->clk_periph[i]; -+ -+ clk_hw_unregister(&sclk->hw); -+ } -+ -+unreg_clk_factor: -+ for (i = 0; i < priv->data->num_clk_factor; i++) { -+ struct mtmips_clk_factor *sclk = &priv->data->clk_factor[i]; -+ -+ clk_hw_unregister_fixed_factor(sclk->hw); -+ } -+ -+unreg_clk_fixed: -+ for (i = 0; i < priv->data->num_clk_fixed; i++) { -+ struct mtmips_clk_fixed *sclk = &priv->data->clk_fixed[i]; -+ -+ clk_hw_unregister_fixed_rate(sclk->hw); -+ } -+ -+unreg_clk_top: -+ for (i = 0; i < priv->data->num_clk_base; i++) { -+ struct mtmips_clk *sclk = &priv->data->clk_base[i]; -+ -+ clk_hw_unregister(&sclk->hw); -+ } -+ -+free_clk_data: -+ kfree(clk_data); -+ -+free_clk_priv: -+ kfree(priv); -+} -+CLK_OF_DECLARE_DRIVER(rt2880_clk, "ralink,rt2880-sysc", mtmips_clk_init); -+CLK_OF_DECLARE_DRIVER(rt3050_clk, "ralink,rt3050-sysc", mtmips_clk_init); -+CLK_OF_DECLARE_DRIVER(rt3052_clk, "ralink,rt3052-sysc", mtmips_clk_init); -+CLK_OF_DECLARE_DRIVER(rt3352_clk, "ralink,rt3352-sysc", mtmips_clk_init); -+CLK_OF_DECLARE_DRIVER(rt3883_clk, "ralink,rt3883-sysc", mtmips_clk_init); -+CLK_OF_DECLARE_DRIVER(rt5350_clk, "ralink,rt5350-sysc", mtmips_clk_init); -+CLK_OF_DECLARE_DRIVER(mt7620_clk, "ralink,mt7620-sysc", mtmips_clk_init); -+CLK_OF_DECLARE_DRIVER(mt7628_clk, "ralink,mt7628-sysc", mtmips_clk_init); -+CLK_OF_DECLARE_DRIVER(mt7688_clk, "ralink,mt7688-sysc", mtmips_clk_init); -+ -+struct mtmips_rst { -+ struct reset_controller_dev rcdev; -+ struct regmap *sysc; -+}; -+ -+static struct mtmips_rst *to_mtmips_rst(struct reset_controller_dev *dev) -+{ -+ return container_of(dev, struct mtmips_rst, rcdev); -+} -+ -+static int mtmips_assert_device(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct mtmips_rst *data = to_mtmips_rst(rcdev); -+ struct regmap *sysc = data->sysc; -+ -+ return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), BIT(id)); -+} -+ -+static int mtmips_deassert_device(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct mtmips_rst *data = to_mtmips_rst(rcdev); -+ struct regmap *sysc = data->sysc; -+ -+ return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), 0); -+} -+ -+static int mtmips_reset_device(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ int ret; -+ -+ ret = mtmips_assert_device(rcdev, id); -+ if (ret < 0) -+ return ret; -+ -+ return mtmips_deassert_device(rcdev, id); -+} -+ -+static int mtmips_rst_xlate(struct reset_controller_dev *rcdev, -+ const struct of_phandle_args *reset_spec) -+{ -+ unsigned long id = reset_spec->args[0]; -+ -+ if (id == 0 || id >= rcdev->nr_resets) -+ return -EINVAL; -+ -+ return id; -+} -+ -+static const struct reset_control_ops reset_ops = { -+ .reset = mtmips_reset_device, -+ .assert = mtmips_assert_device, -+ .deassert = mtmips_deassert_device -+}; -+ -+static int mtmips_reset_init(struct device *dev, struct regmap *sysc) -+{ -+ struct mtmips_rst *rst_data; -+ -+ rst_data = devm_kzalloc(dev, sizeof(*rst_data), GFP_KERNEL); -+ if (!rst_data) -+ return -ENOMEM; -+ -+ rst_data->sysc = sysc; -+ rst_data->rcdev.ops = &reset_ops; -+ rst_data->rcdev.owner = THIS_MODULE; -+ rst_data->rcdev.nr_resets = 32; -+ rst_data->rcdev.of_reset_n_cells = 1; -+ rst_data->rcdev.of_xlate = mtmips_rst_xlate; -+ rst_data->rcdev.of_node = dev_of_node(dev); -+ -+ return devm_reset_controller_register(dev, &rst_data->rcdev); -+} -+ -+static int mtmips_clk_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct device *dev = &pdev->dev; -+ struct mtmips_clk_priv *priv; -+ int ret; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ priv->sysc = syscon_node_to_regmap(np); -+ if (IS_ERR(priv->sysc)) -+ return dev_err_probe(dev, PTR_ERR(priv->sysc), -+ "Could not get sysc syscon regmap\n"); -+ -+ ret = mtmips_reset_init(dev, priv->sysc); -+ if (ret) -+ return dev_err_probe(dev, ret, "Could not init reset controller\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id mtmips_clk_of_match[] = { -+ { .compatible = "ralink,rt2880-reset" }, -+ { .compatible = "ralink,rt2880-sysc" }, -+ { .compatible = "ralink,rt3050-sysc" }, -+ { .compatible = "ralink,rt3052-sysc" }, -+ { .compatible = "ralink,rt3352-sysc" }, -+ { .compatible = "ralink,rt3883-sysc" }, -+ { .compatible = "ralink,rt5350-sysc" }, -+ { .compatible = "ralink,mt7620-sysc" }, -+ { .compatible = "ralink,mt7628-sysc" }, -+ { .compatible = "ralink,mt7688-sysc" }, -+ {} -+}; -+ -+static struct platform_driver mtmips_clk_driver = { -+ .probe = mtmips_clk_probe, -+ .driver = { -+ .name = "mtmips-clk", -+ .of_match_table = mtmips_clk_of_match, -+ }, -+}; -+ -+static int __init mtmips_clk_reset_init(void) -+{ -+ return platform_driver_register(&mtmips_clk_driver); -+} -+arch_initcall(mtmips_clk_reset_init); diff --git a/target/linux/ramips/patches-6.6/005-v6.5-03-mips-ralink-rt288x-remove-clock-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-03-mips-ralink-rt288x-remove-clock-related-code.patch deleted file mode 100644 index df4208b23d..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-03-mips-ralink-rt288x-remove-clock-related-code.patch +++ /dev/null @@ -1,81 +0,0 @@ -From ffcdf47379eae86dc8f8f02c62994dacf2c9038e Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:35 +0200 -Subject: [PATCH 3/9] mips: ralink: rt288x: remove clock related code - -A properly clock driver for ralink SoCs has been added. Hence there is no -need to have clock related code in 'arch/mips/ralink' folder anymore. - -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/include/asm/mach-ralink/rt288x.h | 10 ---------- - arch/mips/ralink/rt288x.c | 31 ------------------------------ - 2 files changed, 41 deletions(-) - ---- a/arch/mips/include/asm/mach-ralink/rt288x.h -+++ b/arch/mips/include/asm/mach-ralink/rt288x.h -@@ -17,7 +17,6 @@ - #define SYSC_REG_CHIP_NAME1 0x04 - #define SYSC_REG_CHIP_ID 0x0c - #define SYSC_REG_SYSTEM_CONFIG 0x10 --#define SYSC_REG_CLKCFG 0x30 - - #define RT2880_CHIP_NAME0 0x38325452 - #define RT2880_CHIP_NAME1 0x20203038 -@@ -26,15 +25,6 @@ - #define CHIP_ID_ID_SHIFT 8 - #define CHIP_ID_REV_MASK 0xff - --#define SYSTEM_CONFIG_CPUCLK_SHIFT 20 --#define SYSTEM_CONFIG_CPUCLK_MASK 0x3 --#define SYSTEM_CONFIG_CPUCLK_250 0x0 --#define SYSTEM_CONFIG_CPUCLK_266 0x1 --#define SYSTEM_CONFIG_CPUCLK_280 0x2 --#define SYSTEM_CONFIG_CPUCLK_300 0x3 -- --#define CLKCFG_SRAM_CS_N_WDT BIT(9) -- - #define RT2880_SDRAM_BASE 0x08000000 - #define RT2880_MEM_SIZE_MIN 2 - #define RT2880_MEM_SIZE_MAX 128 ---- a/arch/mips/ralink/rt288x.c -+++ b/arch/mips/ralink/rt288x.c -@@ -17,37 +17,6 @@ - - #include "common.h" - --void __init ralink_clk_init(void) --{ -- unsigned long cpu_rate, wmac_rate = 40000000; -- u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); -- t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); -- -- switch (t) { -- case SYSTEM_CONFIG_CPUCLK_250: -- cpu_rate = 250000000; -- break; -- case SYSTEM_CONFIG_CPUCLK_266: -- cpu_rate = 266666667; -- break; -- case SYSTEM_CONFIG_CPUCLK_280: -- cpu_rate = 280000000; -- break; -- case SYSTEM_CONFIG_CPUCLK_300: -- cpu_rate = 300000000; -- break; -- } -- -- ralink_clk_add("cpu", cpu_rate); -- ralink_clk_add("300100.timer", cpu_rate / 2); -- ralink_clk_add("300120.watchdog", cpu_rate / 2); -- ralink_clk_add("300500.uart", cpu_rate / 2); -- ralink_clk_add("300900.i2c", cpu_rate / 2); -- ralink_clk_add("300c00.uartlite", cpu_rate / 2); -- ralink_clk_add("400000.ethernet", cpu_rate / 2); -- ralink_clk_add("480000.wmac", wmac_rate); --} -- - void __init ralink_of_remap(void) - { - rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); diff --git a/target/linux/ramips/patches-6.6/005-v6.5-04-mips-ralink-rt305x-remove-clock-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-04-mips-ralink-rt305x-remove-clock-related-code.patch deleted file mode 100644 index 12b4623b73..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-04-mips-ralink-rt305x-remove-clock-related-code.patch +++ /dev/null @@ -1,145 +0,0 @@ -From daf73c70f69386fb15960526772ef584a4efcaf2 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:36 +0200 -Subject: [PATCH 4/9] mips: ralink: rt305x: remove clock related code - -A properly clock driver for ralink SoCs has been added. Hence there is no -need to have clock related code in 'arch/mips/ralink' folder anymore. - -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/include/asm/mach-ralink/rt305x.h | 21 -------- - arch/mips/ralink/rt305x.c | 78 ------------------------------ - 2 files changed, 99 deletions(-) - ---- a/arch/mips/include/asm/mach-ralink/rt305x.h -+++ b/arch/mips/include/asm/mach-ralink/rt305x.h -@@ -66,26 +66,9 @@ static inline int soc_is_rt5350(void) - #define CHIP_ID_ID_SHIFT 8 - #define CHIP_ID_REV_MASK 0xff - --#define RT305X_SYSCFG_CPUCLK_SHIFT 18 --#define RT305X_SYSCFG_CPUCLK_MASK 0x1 --#define RT305X_SYSCFG_CPUCLK_LOW 0x0 --#define RT305X_SYSCFG_CPUCLK_HIGH 0x1 -- - #define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2 --#define RT305X_SYSCFG_CPUCLK_MASK 0x1 - #define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 0x1 - --#define RT3352_SYSCFG0_CPUCLK_SHIFT 8 --#define RT3352_SYSCFG0_CPUCLK_MASK 0x1 --#define RT3352_SYSCFG0_CPUCLK_LOW 0x0 --#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1 -- --#define RT5350_SYSCFG0_CPUCLK_SHIFT 8 --#define RT5350_SYSCFG0_CPUCLK_MASK 0x3 --#define RT5350_SYSCFG0_CPUCLK_360 0x0 --#define RT5350_SYSCFG0_CPUCLK_320 0x2 --#define RT5350_SYSCFG0_CPUCLK_300 0x3 -- - #define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12 - #define RT5350_SYSCFG0_DRAM_SIZE_MASK 7 - #define RT5350_SYSCFG0_DRAM_SIZE_2M 0 -@@ -116,13 +99,9 @@ static inline int soc_is_rt5350(void) - - #define RT3352_SYSC_REG_SYSCFG0 0x010 - #define RT3352_SYSC_REG_SYSCFG1 0x014 --#define RT3352_SYSC_REG_CLKCFG1 0x030 - #define RT3352_SYSC_REG_RSTCTRL 0x034 - #define RT3352_SYSC_REG_USB_PS 0x05c - --#define RT3352_CLKCFG0_XTAL_SEL BIT(20) --#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18) --#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20) - #define RT3352_RSTCTRL_UHST BIT(22) - #define RT3352_RSTCTRL_UDEV BIT(25) - #define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10) ---- a/arch/mips/ralink/rt305x.c -+++ b/arch/mips/ralink/rt305x.c -@@ -53,84 +53,6 @@ static unsigned long rt5350_get_mem_size - return ret; - } - --void __init ralink_clk_init(void) --{ -- unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate; -- unsigned long wmac_rate = 40000000; -- -- u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); -- -- if (soc_is_rt305x() || soc_is_rt3350()) { -- t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & -- RT305X_SYSCFG_CPUCLK_MASK; -- switch (t) { -- case RT305X_SYSCFG_CPUCLK_LOW: -- cpu_rate = 320000000; -- break; -- case RT305X_SYSCFG_CPUCLK_HIGH: -- cpu_rate = 384000000; -- break; -- } -- sys_rate = uart_rate = wdt_rate = cpu_rate / 3; -- } else if (soc_is_rt3352()) { -- t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) & -- RT3352_SYSCFG0_CPUCLK_MASK; -- switch (t) { -- case RT3352_SYSCFG0_CPUCLK_LOW: -- cpu_rate = 384000000; -- break; -- case RT3352_SYSCFG0_CPUCLK_HIGH: -- cpu_rate = 400000000; -- break; -- } -- sys_rate = wdt_rate = cpu_rate / 3; -- uart_rate = 40000000; -- } else if (soc_is_rt5350()) { -- t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) & -- RT5350_SYSCFG0_CPUCLK_MASK; -- switch (t) { -- case RT5350_SYSCFG0_CPUCLK_360: -- cpu_rate = 360000000; -- sys_rate = cpu_rate / 3; -- break; -- case RT5350_SYSCFG0_CPUCLK_320: -- cpu_rate = 320000000; -- sys_rate = cpu_rate / 4; -- break; -- case RT5350_SYSCFG0_CPUCLK_300: -- cpu_rate = 300000000; -- sys_rate = cpu_rate / 3; -- break; -- default: -- BUG(); -- } -- uart_rate = 40000000; -- wdt_rate = sys_rate; -- } else { -- BUG(); -- } -- -- if (soc_is_rt3352() || soc_is_rt5350()) { -- u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0); -- -- if (!(val & RT3352_CLKCFG0_XTAL_SEL)) -- wmac_rate = 20000000; -- } -- -- ralink_clk_add("cpu", cpu_rate); -- ralink_clk_add("sys", sys_rate); -- ralink_clk_add("10000900.i2c", uart_rate); -- ralink_clk_add("10000a00.i2s", uart_rate); -- ralink_clk_add("10000b00.spi", sys_rate); -- ralink_clk_add("10000b40.spi", sys_rate); -- ralink_clk_add("10000100.timer", wdt_rate); -- ralink_clk_add("10000120.watchdog", wdt_rate); -- ralink_clk_add("10000500.uart", uart_rate); -- ralink_clk_add("10000c00.uartlite", uart_rate); -- ralink_clk_add("10100000.ethernet", sys_rate); -- ralink_clk_add("10180000.wmac", wmac_rate); --} -- - void __init ralink_of_remap(void) - { - rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc"); diff --git a/target/linux/ramips/patches-6.6/005-v6.5-05-mips-ralink-rt3883-remove-clock-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-05-mips-ralink-rt3883-remove-clock-related-code.patch deleted file mode 100644 index c13c4215f3..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-05-mips-ralink-rt3883-remove-clock-related-code.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 7cd1bb48885449a9323c7ff0f10012925e93b4e1 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:37 +0200 -Subject: [PATCH 5/9] mips: ralink: rt3883: remove clock related code - -A properly clock driver for ralink SoCs has been added. Hence there is no -need to have clock related code in 'arch/mips/ralink' folder anymore. - -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/include/asm/mach-ralink/rt3883.h | 8 ------ - arch/mips/ralink/rt3883.c | 44 ------------------------------ - 2 files changed, 52 deletions(-) - ---- a/arch/mips/include/asm/mach-ralink/rt3883.h -+++ b/arch/mips/include/asm/mach-ralink/rt3883.h -@@ -90,14 +90,6 @@ - #define RT3883_REVID_VER_ID_SHIFT 8 - #define RT3883_REVID_ECO_ID_MASK 0x0f - --#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17) --#define RT3883_SYSCFG0_CPUCLK_SHIFT 8 --#define RT3883_SYSCFG0_CPUCLK_MASK 0x3 --#define RT3883_SYSCFG0_CPUCLK_250 0x0 --#define RT3883_SYSCFG0_CPUCLK_384 0x1 --#define RT3883_SYSCFG0_CPUCLK_480 0x2 --#define RT3883_SYSCFG0_CPUCLK_500 0x3 -- - #define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10) - #define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8) - #define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7) ---- a/arch/mips/ralink/rt3883.c -+++ b/arch/mips/ralink/rt3883.c -@@ -17,50 +17,6 @@ - - #include "common.h" - --void __init ralink_clk_init(void) --{ -- unsigned long cpu_rate, sys_rate; -- u32 syscfg0; -- u32 clksel; -- u32 ddr2; -- -- syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0); -- clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) & -- RT3883_SYSCFG0_CPUCLK_MASK); -- ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2; -- -- switch (clksel) { -- case RT3883_SYSCFG0_CPUCLK_250: -- cpu_rate = 250000000; -- sys_rate = (ddr2) ? 125000000 : 83000000; -- break; -- case RT3883_SYSCFG0_CPUCLK_384: -- cpu_rate = 384000000; -- sys_rate = (ddr2) ? 128000000 : 96000000; -- break; -- case RT3883_SYSCFG0_CPUCLK_480: -- cpu_rate = 480000000; -- sys_rate = (ddr2) ? 160000000 : 120000000; -- break; -- case RT3883_SYSCFG0_CPUCLK_500: -- cpu_rate = 500000000; -- sys_rate = (ddr2) ? 166000000 : 125000000; -- break; -- } -- -- ralink_clk_add("cpu", cpu_rate); -- ralink_clk_add("10000100.timer", sys_rate); -- ralink_clk_add("10000120.watchdog", sys_rate); -- ralink_clk_add("10000500.uart", 40000000); -- ralink_clk_add("10000900.i2c", 40000000); -- ralink_clk_add("10000a00.i2s", 40000000); -- ralink_clk_add("10000b00.spi", sys_rate); -- ralink_clk_add("10000b40.spi", sys_rate); -- ralink_clk_add("10000c00.uartlite", 40000000); -- ralink_clk_add("10100000.ethernet", sys_rate); -- ralink_clk_add("10180000.wmac", 40000000); --} -- - void __init ralink_of_remap(void) - { - rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc"); diff --git a/target/linux/ramips/patches-6.6/005-v6.5-06-mips-ralink-mt7620-remove-clock-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-06-mips-ralink-mt7620-remove-clock-related-code.patch deleted file mode 100644 index 7b83cf54b4..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-06-mips-ralink-mt7620-remove-clock-related-code.patch +++ /dev/null @@ -1,327 +0,0 @@ -From 04b153abdfcbaba70ceef5a846067d4447fd0078 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:38 +0200 -Subject: [PATCH 6/9] mips: ralink: mt7620: remove clock related code - -A proper clock driver for ralink SoCs has been added. Hence there is no -need to have clock related code in 'arch/mips/ralink' folder anymore. -Since this is the last clock related code removal, remove also remaining -prototypes in 'common.h' header file. - -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/include/asm/mach-ralink/mt7620.h | 35 ----- - arch/mips/ralink/common.h | 3 - - arch/mips/ralink/mt7620.c | 226 ----------------------------- - 3 files changed, 264 deletions(-) - ---- a/arch/mips/include/asm/mach-ralink/mt7620.h -+++ b/arch/mips/include/asm/mach-ralink/mt7620.h -@@ -19,52 +19,17 @@ - #define SYSC_REG_CHIP_REV 0x0c - #define SYSC_REG_SYSTEM_CONFIG0 0x10 - #define SYSC_REG_SYSTEM_CONFIG1 0x14 --#define SYSC_REG_CLKCFG0 0x2c --#define SYSC_REG_CPU_SYS_CLKCFG 0x3c --#define SYSC_REG_CPLL_CONFIG0 0x54 --#define SYSC_REG_CPLL_CONFIG1 0x58 - - #define MT7620_CHIP_NAME0 0x3637544d - #define MT7620_CHIP_NAME1 0x20203032 - #define MT7628_CHIP_NAME1 0x20203832 - --#define SYSCFG0_XTAL_FREQ_SEL BIT(6) -- - #define CHIP_REV_PKG_MASK 0x1 - #define CHIP_REV_PKG_SHIFT 16 - #define CHIP_REV_VER_MASK 0xf - #define CHIP_REV_VER_SHIFT 8 - #define CHIP_REV_ECO_MASK 0xf - --#define CLKCFG0_PERI_CLK_SEL BIT(4) -- --#define CPU_SYS_CLKCFG_OCP_RATIO_SHIFT 16 --#define CPU_SYS_CLKCFG_OCP_RATIO_MASK 0xf --#define CPU_SYS_CLKCFG_OCP_RATIO_1 0 /* 1:1 (Reserved) */ --#define CPU_SYS_CLKCFG_OCP_RATIO_1_5 1 /* 1:1.5 (Reserved) */ --#define CPU_SYS_CLKCFG_OCP_RATIO_2 2 /* 1:2 */ --#define CPU_SYS_CLKCFG_OCP_RATIO_2_5 3 /* 1:2.5 (Reserved) */ --#define CPU_SYS_CLKCFG_OCP_RATIO_3 4 /* 1:3 */ --#define CPU_SYS_CLKCFG_OCP_RATIO_3_5 5 /* 1:3.5 (Reserved) */ --#define CPU_SYS_CLKCFG_OCP_RATIO_4 6 /* 1:4 */ --#define CPU_SYS_CLKCFG_OCP_RATIO_5 7 /* 1:5 */ --#define CPU_SYS_CLKCFG_OCP_RATIO_10 8 /* 1:10 */ --#define CPU_SYS_CLKCFG_CPU_FDIV_SHIFT 8 --#define CPU_SYS_CLKCFG_CPU_FDIV_MASK 0x1f --#define CPU_SYS_CLKCFG_CPU_FFRAC_SHIFT 0 --#define CPU_SYS_CLKCFG_CPU_FFRAC_MASK 0x1f -- --#define CPLL_CFG0_SW_CFG BIT(31) --#define CPLL_CFG0_PLL_MULT_RATIO_SHIFT 16 --#define CPLL_CFG0_PLL_MULT_RATIO_MASK 0x7 --#define CPLL_CFG0_LC_CURFCK BIT(15) --#define CPLL_CFG0_BYPASS_REF_CLK BIT(14) --#define CPLL_CFG0_PLL_DIV_RATIO_SHIFT 10 --#define CPLL_CFG0_PLL_DIV_RATIO_MASK 0x3 -- --#define CPLL_CFG1_CPU_AUX1 BIT(25) --#define CPLL_CFG1_CPU_AUX0 BIT(24) -- - #define SYSCFG0_DRAM_TYPE_MASK 0x3 - #define SYSCFG0_DRAM_TYPE_SHIFT 4 - #define SYSCFG0_DRAM_TYPE_SDRAM 0 ---- a/arch/mips/ralink/common.h -+++ b/arch/mips/ralink/common.h -@@ -23,9 +23,6 @@ extern struct ralink_soc_info soc_info; - - extern void ralink_of_remap(void); - --extern void ralink_clk_init(void); --extern void ralink_clk_add(const char *dev, unsigned long rate); -- - extern void ralink_rst_init(void); - - extern void __init prom_soc_init(struct ralink_soc_info *soc_info); ---- a/arch/mips/ralink/mt7620.c -+++ b/arch/mips/ralink/mt7620.c -@@ -34,12 +34,6 @@ - #define PMU1_CFG 0x8C - #define DIG_SW_SEL BIT(25) - --/* clock scaling */ --#define CLKCFG_FDIV_MASK 0x1f00 --#define CLKCFG_FDIV_USB_VAL 0x0300 --#define CLKCFG_FFRAC_MASK 0x001f --#define CLKCFG_FFRAC_USB_VAL 0x0003 -- - /* EFUSE bits */ - #define EFUSE_MT7688 0x100000 - -@@ -49,226 +43,6 @@ - /* does the board have sdram or ddram */ - static int dram_type; - --static __init u32 --mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) --{ -- u64 t; -- -- t = ref_rate; -- t *= mul; -- do_div(t, div); -- -- return t; --} -- --#define MHZ(x) ((x) * 1000 * 1000) -- --static __init unsigned long --mt7620_get_xtal_rate(void) --{ -- u32 reg; -- -- reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); -- if (reg & SYSCFG0_XTAL_FREQ_SEL) -- return MHZ(40); -- -- return MHZ(20); --} -- --static __init unsigned long --mt7620_get_periph_rate(unsigned long xtal_rate) --{ -- u32 reg; -- -- reg = rt_sysc_r32(SYSC_REG_CLKCFG0); -- if (reg & CLKCFG0_PERI_CLK_SEL) -- return xtal_rate; -- -- return MHZ(40); --} -- --static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 }; -- --static __init unsigned long --mt7620_get_cpu_pll_rate(unsigned long xtal_rate) --{ -- u32 reg; -- u32 mul; -- u32 div; -- -- reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); -- if (reg & CPLL_CFG0_BYPASS_REF_CLK) -- return xtal_rate; -- -- if ((reg & CPLL_CFG0_SW_CFG) == 0) -- return MHZ(600); -- -- mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) & -- CPLL_CFG0_PLL_MULT_RATIO_MASK; -- mul += 24; -- if (reg & CPLL_CFG0_LC_CURFCK) -- mul *= 2; -- -- div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) & -- CPLL_CFG0_PLL_DIV_RATIO_MASK; -- -- WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider)); -- -- return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]); --} -- --static __init unsigned long --mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate) --{ -- u32 reg; -- -- reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); -- if (reg & CPLL_CFG1_CPU_AUX1) -- return xtal_rate; -- -- if (reg & CPLL_CFG1_CPU_AUX0) -- return MHZ(480); -- -- return cpu_pll_rate; --} -- --static __init unsigned long --mt7620_get_cpu_rate(unsigned long pll_rate) --{ -- u32 reg; -- u32 mul; -- u32 div; -- -- reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); -- -- mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK; -- div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) & -- CPU_SYS_CLKCFG_CPU_FDIV_MASK; -- -- return mt7620_calc_rate(pll_rate, mul, div); --} -- --static const u32 mt7620_ocp_dividers[16] __initconst = { -- [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2, -- [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3, -- [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4, -- [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5, -- [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10, --}; -- --static __init unsigned long --mt7620_get_dram_rate(unsigned long pll_rate) --{ -- if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) -- return pll_rate / 4; -- -- return pll_rate / 3; --} -- --static __init unsigned long --mt7620_get_sys_rate(unsigned long cpu_rate) --{ -- u32 reg; -- u32 ocp_ratio; -- u32 div; -- -- reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); -- -- ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) & -- CPU_SYS_CLKCFG_OCP_RATIO_MASK; -- -- if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers))) -- return cpu_rate; -- -- div = mt7620_ocp_dividers[ocp_ratio]; -- if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio)) -- return cpu_rate; -- -- return cpu_rate / div; --} -- --void __init ralink_clk_init(void) --{ -- unsigned long xtal_rate; -- unsigned long cpu_pll_rate; -- unsigned long pll_rate; -- unsigned long cpu_rate; -- unsigned long sys_rate; -- unsigned long dram_rate; -- unsigned long periph_rate; -- unsigned long pcmi2s_rate; -- -- xtal_rate = mt7620_get_xtal_rate(); -- --#define RFMT(label) label ":%lu.%03luMHz " --#define RINT(x) ((x) / 1000000) --#define RFRAC(x) (((x) / 1000) % 1000) -- -- if (is_mt76x8()) { -- if (xtal_rate == MHZ(40)) -- cpu_rate = MHZ(580); -- else -- cpu_rate = MHZ(575); -- dram_rate = sys_rate = cpu_rate / 3; -- periph_rate = MHZ(40); -- pcmi2s_rate = MHZ(480); -- -- ralink_clk_add("10000d00.uartlite", periph_rate); -- ralink_clk_add("10000e00.uartlite", periph_rate); -- } else { -- cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); -- pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); -- -- cpu_rate = mt7620_get_cpu_rate(pll_rate); -- dram_rate = mt7620_get_dram_rate(pll_rate); -- sys_rate = mt7620_get_sys_rate(cpu_rate); -- periph_rate = mt7620_get_periph_rate(xtal_rate); -- pcmi2s_rate = periph_rate; -- -- pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), -- RINT(xtal_rate), RFRAC(xtal_rate), -- RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), -- RINT(pll_rate), RFRAC(pll_rate)); -- -- ralink_clk_add("10000500.uart", periph_rate); -- } -- -- pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), -- RINT(cpu_rate), RFRAC(cpu_rate), -- RINT(dram_rate), RFRAC(dram_rate), -- RINT(sys_rate), RFRAC(sys_rate), -- RINT(periph_rate), RFRAC(periph_rate)); --#undef RFRAC --#undef RINT --#undef RFMT -- -- ralink_clk_add("cpu", cpu_rate); -- ralink_clk_add("10000100.timer", periph_rate); -- ralink_clk_add("10000120.watchdog", periph_rate); -- ralink_clk_add("10000900.i2c", periph_rate); -- ralink_clk_add("10000a00.i2s", pcmi2s_rate); -- ralink_clk_add("10000b00.spi", sys_rate); -- ralink_clk_add("10000b40.spi", sys_rate); -- ralink_clk_add("10000c00.uartlite", periph_rate); -- ralink_clk_add("10000d00.uart1", periph_rate); -- ralink_clk_add("10000e00.uart2", periph_rate); -- ralink_clk_add("10180000.wmac", xtal_rate); -- -- if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) { -- /* -- * When the CPU goes into sleep mode, the BUS clock will be -- * too low for USB to function properly. Adjust the busses -- * fractional divider to fix this -- */ -- u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); -- -- val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); -- val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; -- -- rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); -- } --} -- - void __init ralink_of_remap(void) - { - rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc"); diff --git a/target/linux/ramips/patches-6.6/005-v6.5-07-mips-ralink-remove-reset-related-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-07-mips-ralink-remove-reset-related-code.patch deleted file mode 100644 index e96a9084a6..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-07-mips-ralink-remove-reset-related-code.patch +++ /dev/null @@ -1,121 +0,0 @@ -From 201ddc05777cd8e084b508bcdda22214bfe2895e Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:39 +0200 -Subject: [PATCH 7/9] mips: ralink: remove reset related code - -A proper clock driver for ralink SoCs has been added. This driver is also -a reset provider for the SoC. Hence there is no need to have reset related -code in 'arch/mips/ralink' folder anymore. The only code that remains is -the one related with mips_reboot_setup where a PCI reset is performed. -We maintain this because I cannot test old ralink board with PCI to be -sure all works if we remove also this code. - -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/ralink/common.h | 2 -- - arch/mips/ralink/of.c | 4 ---- - arch/mips/ralink/reset.c | 61 ----------------------------------------------- - 3 files changed, 67 deletions(-) - ---- a/arch/mips/ralink/common.h -+++ b/arch/mips/ralink/common.h -@@ -23,8 +23,6 @@ extern struct ralink_soc_info soc_info; - - extern void ralink_of_remap(void); - --extern void ralink_rst_init(void); -- - extern void __init prom_soc_init(struct ralink_soc_info *soc_info); - - __iomem void *plat_of_remap_node(const char *node); ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -81,10 +81,6 @@ static int __init plat_of_setup(void) - { - __dt_register_buses(soc_info.compatible, "palmbus"); - -- /* make sure that the reset controller is setup early */ -- if (ralink_soc != MT762X_SOC_MT7621AT) -- ralink_rst_init(); -- - return 0; - } - ---- a/arch/mips/ralink/reset.c -+++ b/arch/mips/ralink/reset.c -@@ -10,7 +10,6 @@ - #include - #include - #include --#include - - #include - -@@ -22,66 +21,6 @@ - #define RSTCTL_RESET_PCI BIT(26) - #define RSTCTL_RESET_SYSTEM BIT(0) - --static int ralink_assert_device(struct reset_controller_dev *rcdev, -- unsigned long id) --{ -- u32 val; -- -- if (id == 0) -- return -1; -- -- val = rt_sysc_r32(SYSC_REG_RESET_CTRL); -- val |= BIT(id); -- rt_sysc_w32(val, SYSC_REG_RESET_CTRL); -- -- return 0; --} -- --static int ralink_deassert_device(struct reset_controller_dev *rcdev, -- unsigned long id) --{ -- u32 val; -- -- if (id == 0) -- return -1; -- -- val = rt_sysc_r32(SYSC_REG_RESET_CTRL); -- val &= ~BIT(id); -- rt_sysc_w32(val, SYSC_REG_RESET_CTRL); -- -- return 0; --} -- --static int ralink_reset_device(struct reset_controller_dev *rcdev, -- unsigned long id) --{ -- ralink_assert_device(rcdev, id); -- return ralink_deassert_device(rcdev, id); --} -- --static const struct reset_control_ops reset_ops = { -- .reset = ralink_reset_device, -- .assert = ralink_assert_device, -- .deassert = ralink_deassert_device, --}; -- --static struct reset_controller_dev reset_dev = { -- .ops = &reset_ops, -- .owner = THIS_MODULE, -- .nr_resets = 32, -- .of_reset_n_cells = 1, --}; -- --void ralink_rst_init(void) --{ -- reset_dev.of_node = of_find_compatible_node(NULL, NULL, -- "ralink,rt2880-reset"); -- if (!reset_dev.of_node) -- pr_err("Failed to find reset controller node"); -- else -- reset_controller_register(&reset_dev); --} -- - static void ralink_restart(char *command) - { - if (IS_ENABLED(CONFIG_PCI)) { diff --git a/target/linux/ramips/patches-6.6/005-v6.5-08-mips-ralink-get-cpu-rate-from-new-driver-code.patch b/target/linux/ramips/patches-6.6/005-v6.5-08-mips-ralink-get-cpu-rate-from-new-driver-code.patch deleted file mode 100644 index 2430c1f375..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-08-mips-ralink-get-cpu-rate-from-new-driver-code.patch +++ /dev/null @@ -1,102 +0,0 @@ -From ad38c17b0c26ae2108b50ac1eb0281a2e1ce08e9 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:40 +0200 -Subject: [PATCH 8/9] mips: ralink: get cpu rate from new driver code - -At very early stage on boot, there is a need to set 'mips_hpt_frequency'. -This timer frequency is a half of the CPU frequency. To get clocks properly -set we need to call to 'of_clk_init()' and properly get cpu clock frequency -afterwards. Depending on the SoC, CPU clock index and compatible differs, so -use them to get the proper clock frm the clock provider. Hence, adapt code -to be aligned with new clock driver. - -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/ralink/clk.c | 61 ++++++++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 52 insertions(+), 9 deletions(-) - ---- a/arch/mips/ralink/clk.c -+++ b/arch/mips/ralink/clk.c -@@ -11,29 +11,72 @@ - #include - #include - #include -+#include - - #include - - #include "common.h" - --void ralink_clk_add(const char *dev, unsigned long rate) -+static const char *clk_cpu(int *idx) - { -- struct clk *clk = clk_register_fixed_rate(NULL, dev, NULL, 0, rate); -- -- if (!clk) -- panic("failed to add clock"); -- -- clkdev_create(clk, NULL, "%s", dev); -+ switch (ralink_soc) { -+ case RT2880_SOC: -+ *idx = 0; -+ return "ralink,rt2880-sysc"; -+ case RT3883_SOC: -+ *idx = 0; -+ return "ralink,rt3883-sysc"; -+ case RT305X_SOC_RT3050: -+ *idx = 0; -+ return "ralink,rt3050-sysc"; -+ case RT305X_SOC_RT3052: -+ *idx = 0; -+ return "ralink,rt3052-sysc"; -+ case RT305X_SOC_RT3350: -+ *idx = 1; -+ return "ralink,rt3350-sysc"; -+ case RT305X_SOC_RT3352: -+ *idx = 1; -+ return "ralink,rt3352-sysc"; -+ case RT305X_SOC_RT5350: -+ *idx = 1; -+ return "ralink,rt5350-sysc"; -+ case MT762X_SOC_MT7620A: -+ *idx = 2; -+ return "ralink,mt7620-sysc"; -+ case MT762X_SOC_MT7620N: -+ *idx = 2; -+ return "ralink,mt7620-sysc"; -+ case MT762X_SOC_MT7628AN: -+ *idx = 1; -+ return "ralink,mt7628-sysc"; -+ case MT762X_SOC_MT7688: -+ *idx = 1; -+ return "ralink,mt7688-sysc"; -+ default: -+ *idx = -1; -+ return "invalid"; -+ } - } - - void __init plat_time_init(void) - { -+ struct of_phandle_args clkspec; -+ const char *compatible; - struct clk *clk; -+ int cpu_clk_idx; - - ralink_of_remap(); - -- ralink_clk_init(); -- clk = clk_get_sys("cpu", NULL); -+ compatible = clk_cpu(&cpu_clk_idx); -+ if (cpu_clk_idx == -1) -+ panic("unable to get CPU clock index"); -+ -+ of_clk_init(NULL); -+ clkspec.np = of_find_compatible_node(NULL, NULL, compatible); -+ clkspec.args_count = 1; -+ clkspec.args[0] = cpu_clk_idx; -+ clk = of_clk_get_from_provider(&clkspec); - if (IS_ERR(clk)) - panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); - pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000); diff --git a/target/linux/ramips/patches-6.6/005-v6.5-09-MAINTAINERS-add-Mediatek-MTMIPS-Clock-maintainer.patch b/target/linux/ramips/patches-6.6/005-v6.5-09-MAINTAINERS-add-Mediatek-MTMIPS-Clock-maintainer.patch deleted file mode 100644 index f7ab99bc76..0000000000 --- a/target/linux/ramips/patches-6.6/005-v6.5-09-MAINTAINERS-add-Mediatek-MTMIPS-Clock-maintainer.patch +++ /dev/null @@ -1,28 +0,0 @@ -From fc15a7193a4d37d79e873fa06cc423180ddd2ddf Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Mon, 19 Jun 2023 06:09:41 +0200 -Subject: [PATCH 9/9] MAINTAINERS: add Mediatek MTMIPS Clock maintainer - -Adding myself as maintainer for Mediatek MTMIPS clock driver. - -Signed-off-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - MAINTAINERS | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -13021,6 +13021,12 @@ S: Maintained - F: Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml - F: drivers/clk/ralink/clk-mt7621.c - -+MEDIATEK MTMIPS CLOCK DRIVER -+M: Sergio Paracuellos -+S: Maintained -+F: Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml -+F: drivers/clk/ralink/clk-mtmips.c -+ - MEDIATEK MT7621/28/88 I2C DRIVER - M: Stefan Roese - L: linux-i2c@vger.kernel.org diff --git a/target/linux/ramips/patches-6.6/006-v6.5-mips-ralink-introduce-commonly-used-remap-node-funct.patch b/target/linux/ramips/patches-6.6/006-v6.5-mips-ralink-introduce-commonly-used-remap-node-funct.patch deleted file mode 100644 index f5c148101f..0000000000 --- a/target/linux/ramips/patches-6.6/006-v6.5-mips-ralink-introduce-commonly-used-remap-node-funct.patch +++ /dev/null @@ -1,191 +0,0 @@ -From fd99ac5055d4705e91c73d1adba18bc71c8511a8 Mon Sep 17 00:00:00 2001 -From: Shiji Yang -Date: Tue, 20 Jun 2023 19:44:32 +0800 -Subject: [PATCH] mips: ralink: introduce commonly used remap node function - -The ralink_of_remap() function is repeated several times on SoC specific -source files. They have the same structure, but just differ in compatible -strings. In order to make commonly use of these codes, this patch -introduces a newly designed mtmips_of_remap_node() function to match and -remap all supported system controller and memory controller nodes. - -Build and run tested on MT7620 and MT7628. - -Signed-off-by: Shiji Yang -Reviewed-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/ralink/common.h | 2 -- - arch/mips/ralink/mt7620.c | 9 --------- - arch/mips/ralink/mt7621.c | 9 --------- - arch/mips/ralink/of.c | 42 +++++++++++++++++++++++++++++++++++------- - arch/mips/ralink/rt288x.c | 9 --------- - arch/mips/ralink/rt305x.c | 9 --------- - arch/mips/ralink/rt3883.c | 9 --------- - 7 files changed, 35 insertions(+), 54 deletions(-) - ---- a/arch/mips/ralink/common.h -+++ b/arch/mips/ralink/common.h -@@ -25,6 +25,4 @@ extern void ralink_of_remap(void); - - extern void __init prom_soc_init(struct ralink_soc_info *soc_info); - --__iomem void *plat_of_remap_node(const char *node); -- - #endif /* _RALINK_COMMON_H__ */ ---- a/arch/mips/ralink/mt7620.c -+++ b/arch/mips/ralink/mt7620.c -@@ -43,15 +43,6 @@ - /* does the board have sdram or ddram */ - static int dram_type; - --void __init ralink_of_remap(void) --{ -- rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc"); -- rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc"); -- -- if (!rt_sysc_membase || !rt_memc_membase) -- panic("Failed to remap core resources"); --} -- - static __init void - mt7620_dram_init(struct ralink_soc_info *soc_info) - { ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -89,15 +89,6 @@ static void __init mt7621_memory_detect( - memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE); - } - --void __init ralink_of_remap(void) --{ -- rt_sysc_membase = plat_of_remap_node("mediatek,mt7621-sysc"); -- rt_memc_membase = plat_of_remap_node("mediatek,mt7621-memc"); -- -- if (!rt_sysc_membase || !rt_memc_membase) -- panic("Failed to remap core resources"); --} -- - static unsigned int __init mt7621_get_soc_name0(void) - { - return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0); ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -29,28 +29,56 @@ __iomem void *rt_sysc_membase; - __iomem void *rt_memc_membase; - EXPORT_SYMBOL_GPL(rt_sysc_membase); - --__iomem void *plat_of_remap_node(const char *node) -+static const struct of_device_id mtmips_memc_match[] = { -+ { .compatible = "mediatek,mt7621-memc" }, -+ { .compatible = "ralink,mt7620a-memc" }, -+ { .compatible = "ralink,rt2880-memc" }, -+ { .compatible = "ralink,rt3050-memc" }, -+ { .compatible = "ralink,rt3883-memc" }, -+ {} -+}; -+ -+static const struct of_device_id mtmips_sysc_match[] = { -+ { .compatible = "mediatek,mt7621-sysc" }, -+ { .compatible = "ralink,mt7620a-sysc" }, -+ { .compatible = "ralink,rt2880-sysc" }, -+ { .compatible = "ralink,rt3050-sysc" }, -+ { .compatible = "ralink,rt3883-sysc" }, -+ {} -+}; -+ -+static __iomem void * -+mtmips_of_remap_node(const struct of_device_id *match, const char *type) - { - struct resource res; - struct device_node *np; - -- np = of_find_compatible_node(NULL, NULL, node); -+ np = of_find_matching_node(NULL, match); - if (!np) -- panic("Failed to find %s node", node); -+ panic("Failed to find %s controller node", type); - - if (of_address_to_resource(np, 0, &res)) -- panic("Failed to get resource for %s", node); -- -- of_node_put(np); -+ panic("Failed to get resource for %s node", np->name); - - if (!request_mem_region(res.start, - resource_size(&res), - res.name)) -- panic("Failed to request resources for %s", node); -+ panic("Failed to request resources for %s node", np->name); -+ -+ of_node_put(np); - - return ioremap(res.start, resource_size(&res)); - } - -+void __init ralink_of_remap(void) -+{ -+ rt_sysc_membase = mtmips_of_remap_node(mtmips_sysc_match, "system"); -+ rt_memc_membase = mtmips_of_remap_node(mtmips_memc_match, "memory"); -+ -+ if (!rt_sysc_membase || !rt_memc_membase) -+ panic("Failed to remap core resources"); -+} -+ - void __init plat_mem_setup(void) - { - void *dtb; ---- a/arch/mips/ralink/rt288x.c -+++ b/arch/mips/ralink/rt288x.c -@@ -17,15 +17,6 @@ - - #include "common.h" - --void __init ralink_of_remap(void) --{ -- rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); -- rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc"); -- -- if (!rt_sysc_membase || !rt_memc_membase) -- panic("Failed to remap core resources"); --} -- - void __init prom_soc_init(struct ralink_soc_info *soc_info) - { - void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); ---- a/arch/mips/ralink/rt305x.c -+++ b/arch/mips/ralink/rt305x.c -@@ -53,15 +53,6 @@ static unsigned long rt5350_get_mem_size - return ret; - } - --void __init ralink_of_remap(void) --{ -- rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc"); -- rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc"); -- -- if (!rt_sysc_membase || !rt_memc_membase) -- panic("Failed to remap core resources"); --} -- - void __init prom_soc_init(struct ralink_soc_info *soc_info) - { - void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); ---- a/arch/mips/ralink/rt3883.c -+++ b/arch/mips/ralink/rt3883.c -@@ -17,15 +17,6 @@ - - #include "common.h" - --void __init ralink_of_remap(void) --{ -- rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc"); -- rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc"); -- -- if (!rt_sysc_membase || !rt_memc_membase) -- panic("Failed to remap core resources"); --} -- - void __init prom_soc_init(struct ralink_soc_info *soc_info) - { - void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE); diff --git a/target/linux/ramips/patches-6.6/007-v6.5-clk-ralink-mtmips-Fix-uninitialized-use-of-ret-in-mt.patch b/target/linux/ramips/patches-6.6/007-v6.5-clk-ralink-mtmips-Fix-uninitialized-use-of-ret-in-mt.patch deleted file mode 100644 index c0c2a6e204..0000000000 --- a/target/linux/ramips/patches-6.6/007-v6.5-clk-ralink-mtmips-Fix-uninitialized-use-of-ret-in-mt.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 6e68dae946e3a0333fbde5487ce163142ca10ae0 Mon Sep 17 00:00:00 2001 -From: Nathan Chancellor -Date: Thu, 22 Jun 2023 15:56:19 +0000 -Subject: clk: ralink: mtmips: Fix uninitialized use of ret in - mtmips_register_{fixed,factor}_clocks() - -Clang warns: - - drivers/clk/ralink/clk-mtmips.c:309:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] - 309 | return ret; - | ^~~ - drivers/clk/ralink/clk-mtmips.c:285:9: note: initialize the variable 'ret' to silence this warning - 285 | int ret, i; - | ^ - | = 0 - drivers/clk/ralink/clk-mtmips.c:359:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] - 359 | return ret; - | ^~~ - drivers/clk/ralink/clk-mtmips.c:335:9: note: initialize the variable 'ret' to silence this warning - 335 | int ret, i; - | ^ - | = 0 - 2 errors generated. - -Set ret to the return value of clk_hw_register_fixed_rate() using the -PTR_ERR() macro, which ensures ret is not used uninitialized, clearing -up the warning. - -Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs") -Closes: https://github.com/ClangBuiltLinux/linux/issues/1879 -Signed-off-by: Nathan Chancellor -Reviewed-by: Nick Desaulniers -Acked-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - drivers/clk/ralink/clk-mtmips.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/clk/ralink/clk-mtmips.c -+++ b/drivers/clk/ralink/clk-mtmips.c -@@ -292,6 +292,7 @@ static int mtmips_register_fixed_clocks( - sclk->parent, 0, - sclk->rate); - if (IS_ERR(sclk->hw)) { -+ ret = PTR_ERR(sclk->hw); - pr_err("Couldn't register fixed clock %d\n", idx); - goto err_clk_unreg; - } -@@ -342,6 +343,7 @@ static int mtmips_register_factor_clocks - sclk->parent, sclk->flags, - sclk->mult, sclk->div); - if (IS_ERR(sclk->hw)) { -+ ret = PTR_ERR(sclk->hw); - pr_err("Couldn't register factor clock %d\n", idx); - goto err_clk_unreg; - } diff --git a/target/linux/ramips/patches-6.6/008-v6.5-mips-ralink-match-all-supported-system-controller-co.patch b/target/linux/ramips/patches-6.6/008-v6.5-mips-ralink-match-all-supported-system-controller-co.patch deleted file mode 100644 index 6940a2b4b9..0000000000 --- a/target/linux/ramips/patches-6.6/008-v6.5-mips-ralink-match-all-supported-system-controller-co.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 670f77f76f650b1b341d31d009cc2fb03a4d1fcf Mon Sep 17 00:00:00 2001 -From: Shiji Yang -Date: Fri, 23 Jun 2023 08:17:48 +0800 -Subject: mips: ralink: match all supported system controller compatible - strings - -Recently, A new clock and reset controller driver has been introduced to -the ralink mips target[1]. It provides proper system control and adds more -SoC specific compatible strings. In order to better initialize CPUs, this -patch removes the outdated "ralink,mt7620a-sysc" and add all dt-binding -documented compatible strings to the system controller match table. - -[1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com/ - -Signed-off-by: Shiji Yang -Reviewed-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/ralink/of.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -40,10 +40,15 @@ static const struct of_device_id mtmips_ - - static const struct of_device_id mtmips_sysc_match[] = { - { .compatible = "mediatek,mt7621-sysc" }, -- { .compatible = "ralink,mt7620a-sysc" }, -+ { .compatible = "ralink,mt7620-sysc" }, -+ { .compatible = "ralink,mt7628-sysc" }, -+ { .compatible = "ralink,mt7688-sysc" }, - { .compatible = "ralink,rt2880-sysc" }, - { .compatible = "ralink,rt3050-sysc" }, -+ { .compatible = "ralink,rt3052-sysc" }, -+ { .compatible = "ralink,rt3352-sysc" }, - { .compatible = "ralink,rt3883-sysc" }, -+ { .compatible = "ralink,rt5350-sysc" }, - {} - }; - diff --git a/target/linux/ramips/patches-6.6/009-v6.3-01-watchdog-mt7621-wdt-avoid-static-global-declarations.patch b/target/linux/ramips/patches-6.6/009-v6.3-01-watchdog-mt7621-wdt-avoid-static-global-declarations.patch deleted file mode 100644 index e06d5621e1..0000000000 --- a/target/linux/ramips/patches-6.6/009-v6.3-01-watchdog-mt7621-wdt-avoid-static-global-declarations.patch +++ /dev/null @@ -1,213 +0,0 @@ -From 783c7cb4659b53b5e1b809dac5e8cdf250145919 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Tue, 14 Feb 2023 11:39:35 +0100 -Subject: [PATCH 1/2] watchdog: mt7621-wdt: avoid static global declarations - -Instead of using static global definitions in driver code, refactor code -introducing a new watchdog driver data structure and use it along the -code. - -Reviewed-by: Guenter Roeck -Signed-off-by: Sergio Paracuellos -Link: https://lore.kernel.org/r/20230214103936.1061078-5-sergio.paracuellos@gmail.com -[groeck: unsigned -> unsigned int] -Signed-off-by: Guenter Roeck -Signed-off-by: Wim Van Sebroeck ---- - drivers/watchdog/mt7621_wdt.c | 102 +++++++++++++++++++++++++++--------------- - 1 file changed, 65 insertions(+), 37 deletions(-) - ---- a/drivers/watchdog/mt7621_wdt.c -+++ b/drivers/watchdog/mt7621_wdt.c -@@ -31,8 +31,11 @@ - #define TMR1CTL_RESTART BIT(9) - #define TMR1CTL_PRESCALE_SHIFT 16 - --static void __iomem *mt7621_wdt_base; --static struct reset_control *mt7621_wdt_reset; -+struct mt7621_wdt_data { -+ void __iomem *base; -+ struct reset_control *rst; -+ struct watchdog_device wdt; -+}; - - static bool nowayout = WATCHDOG_NOWAYOUT; - module_param(nowayout, bool, 0); -@@ -40,27 +43,31 @@ MODULE_PARM_DESC(nowayout, - "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); - --static inline void rt_wdt_w32(unsigned reg, u32 val) -+static inline void rt_wdt_w32(void __iomem *base, unsigned int reg, u32 val) - { -- iowrite32(val, mt7621_wdt_base + reg); -+ iowrite32(val, base + reg); - } - --static inline u32 rt_wdt_r32(unsigned reg) -+static inline u32 rt_wdt_r32(void __iomem *base, unsigned int reg) - { -- return ioread32(mt7621_wdt_base + reg); -+ return ioread32(base + reg); - } - - static int mt7621_wdt_ping(struct watchdog_device *w) - { -- rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART); -+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w); -+ -+ rt_wdt_w32(drvdata->base, TIMER_REG_TMRSTAT, TMR1CTL_RESTART); - - return 0; - } - - static int mt7621_wdt_set_timeout(struct watchdog_device *w, unsigned int t) - { -+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w); -+ - w->timeout = t; -- rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000); -+ rt_wdt_w32(drvdata->base, TIMER_REG_TMR1LOAD, t * 1000); - mt7621_wdt_ping(w); - - return 0; -@@ -68,29 +75,31 @@ static int mt7621_wdt_set_timeout(struct - - static int mt7621_wdt_start(struct watchdog_device *w) - { -+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w); - u32 t; - - /* set the prescaler to 1ms == 1000us */ -- rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT); -+ rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT); - - mt7621_wdt_set_timeout(w, w->timeout); - -- t = rt_wdt_r32(TIMER_REG_TMR1CTL); -+ t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL); - t |= TMR1CTL_ENABLE; -- rt_wdt_w32(TIMER_REG_TMR1CTL, t); -+ rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t); - - return 0; - } - - static int mt7621_wdt_stop(struct watchdog_device *w) - { -+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w); - u32 t; - - mt7621_wdt_ping(w); - -- t = rt_wdt_r32(TIMER_REG_TMR1CTL); -+ t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL); - t &= ~TMR1CTL_ENABLE; -- rt_wdt_w32(TIMER_REG_TMR1CTL, t); -+ rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t); - - return 0; - } -@@ -105,7 +114,9 @@ static int mt7621_wdt_bootcause(void) - - static int mt7621_wdt_is_running(struct watchdog_device *w) - { -- return !!(rt_wdt_r32(TIMER_REG_TMR1CTL) & TMR1CTL_ENABLE); -+ struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w); -+ -+ return !!(rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL) & TMR1CTL_ENABLE); - } - - static const struct watchdog_info mt7621_wdt_info = { -@@ -121,30 +132,39 @@ static const struct watchdog_ops mt7621_ - .set_timeout = mt7621_wdt_set_timeout, - }; - --static struct watchdog_device mt7621_wdt_dev = { -- .info = &mt7621_wdt_info, -- .ops = &mt7621_wdt_ops, -- .min_timeout = 1, -- .max_timeout = 0xfffful / 1000, --}; -- - static int mt7621_wdt_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -- mt7621_wdt_base = devm_platform_ioremap_resource(pdev, 0); -- if (IS_ERR(mt7621_wdt_base)) -- return PTR_ERR(mt7621_wdt_base); -- -- mt7621_wdt_reset = devm_reset_control_get_exclusive(dev, NULL); -- if (!IS_ERR(mt7621_wdt_reset)) -- reset_control_deassert(mt7621_wdt_reset); -- -- mt7621_wdt_dev.bootstatus = mt7621_wdt_bootcause(); -- -- watchdog_init_timeout(&mt7621_wdt_dev, mt7621_wdt_dev.max_timeout, -- dev); -- watchdog_set_nowayout(&mt7621_wdt_dev, nowayout); -- if (mt7621_wdt_is_running(&mt7621_wdt_dev)) { -+ struct watchdog_device *mt7621_wdt; -+ struct mt7621_wdt_data *drvdata; -+ int err; -+ -+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); -+ if (!drvdata) -+ return -ENOMEM; -+ -+ drvdata->base = devm_platform_ioremap_resource(pdev, 0); -+ if (IS_ERR(drvdata->base)) -+ return PTR_ERR(drvdata->base); -+ -+ drvdata->rst = devm_reset_control_get_exclusive(dev, NULL); -+ if (!IS_ERR(drvdata->rst)) -+ reset_control_deassert(drvdata->rst); -+ -+ mt7621_wdt = &drvdata->wdt; -+ mt7621_wdt->info = &mt7621_wdt_info; -+ mt7621_wdt->ops = &mt7621_wdt_ops; -+ mt7621_wdt->min_timeout = 1; -+ mt7621_wdt->max_timeout = 0xfffful / 1000; -+ mt7621_wdt->parent = dev; -+ -+ mt7621_wdt->bootstatus = mt7621_wdt_bootcause(); -+ -+ watchdog_init_timeout(mt7621_wdt, mt7621_wdt->max_timeout, dev); -+ watchdog_set_nowayout(mt7621_wdt, nowayout); -+ watchdog_set_drvdata(mt7621_wdt, drvdata); -+ -+ if (mt7621_wdt_is_running(mt7621_wdt)) { - /* - * Make sure to apply timeout from watchdog core, taking - * the prescaler of this driver here into account (the -@@ -154,17 +174,25 @@ static int mt7621_wdt_probe(struct platf - * we first disable the watchdog, set the new prescaler - * and timeout, and then re-enable the watchdog. - */ -- mt7621_wdt_stop(&mt7621_wdt_dev); -- mt7621_wdt_start(&mt7621_wdt_dev); -- set_bit(WDOG_HW_RUNNING, &mt7621_wdt_dev.status); -+ mt7621_wdt_stop(mt7621_wdt); -+ mt7621_wdt_start(mt7621_wdt); -+ set_bit(WDOG_HW_RUNNING, &mt7621_wdt->status); - } - -- return devm_watchdog_register_device(dev, &mt7621_wdt_dev); -+ err = devm_watchdog_register_device(dev, &drvdata->wdt); -+ if (err) -+ return err; -+ -+ platform_set_drvdata(pdev, drvdata); -+ -+ return 0; - } - - static void mt7621_wdt_shutdown(struct platform_device *pdev) - { -- mt7621_wdt_stop(&mt7621_wdt_dev); -+ struct mt7621_wdt_data *drvdata = platform_get_drvdata(pdev); -+ -+ mt7621_wdt_stop(&drvdata->wdt); - } - - static const struct of_device_id mt7621_wdt_match[] = { diff --git a/target/linux/ramips/patches-6.6/009-v6.3-02-watchdog-mt7621-wdt-avoid-ralink-architecture-depend.patch b/target/linux/ramips/patches-6.6/009-v6.3-02-watchdog-mt7621-wdt-avoid-ralink-architecture-depend.patch deleted file mode 100644 index 7e4e45df13..0000000000 --- a/target/linux/ramips/patches-6.6/009-v6.3-02-watchdog-mt7621-wdt-avoid-ralink-architecture-depend.patch +++ /dev/null @@ -1,104 +0,0 @@ -From ff8ec4ac39ad413b580d611dbf68e1d8a82eba56 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Tue, 14 Feb 2023 11:39:36 +0100 -Subject: [PATCH 2/2] watchdog: mt7621-wdt: avoid ralink architecture dependent code - -MT7621 SoC has a system controller node. Watchdog need to access to reset -status register. Ralink architecture and related driver are old and from -the beggining they are using some architecture dependent operations for -accessing this shared registers through 'asm/mach-ralink/ralink_regs.h' -header file. However this is not ideal from a driver perspective which can -just access to the system controller registers in an arch independent way -using regmap syscon APIs. Update Kconfig accordingly to select new added -dependencies and allow driver to be compile tested. - -Signed-off-by: Sergio Paracuellos -Reviewed-by: Guenter Roeck -Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.com -Signed-off-by: Guenter Roeck -Signed-off-by: Wim Van Sebroeck ---- - drivers/watchdog/Kconfig | 4 +++- - drivers/watchdog/mt7621_wdt.c | 22 +++++++++++++++++----- - 2 files changed, 20 insertions(+), 6 deletions(-) - ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -1865,7 +1865,9 @@ config GXP_WATCHDOG - config MT7621_WDT - tristate "Mediatek SoC watchdog" - select WATCHDOG_CORE -- depends on SOC_MT7620 || SOC_MT7621 -+ select REGMAP_MMIO -+ select MFD_SYSCON -+ depends on SOC_MT7620 || SOC_MT7621 || COMPILE_TEST - help - Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer. - ---- a/drivers/watchdog/mt7621_wdt.c -+++ b/drivers/watchdog/mt7621_wdt.c -@@ -15,8 +15,8 @@ - #include - #include - #include -- --#include -+#include -+#include - - #define SYSC_RSTSTAT 0x38 - #define WDT_RST_CAUSE BIT(1) -@@ -34,6 +34,7 @@ - struct mt7621_wdt_data { - void __iomem *base; - struct reset_control *rst; -+ struct regmap *sysc; - struct watchdog_device wdt; - }; - -@@ -104,9 +105,12 @@ static int mt7621_wdt_stop(struct watchd - return 0; - } - --static int mt7621_wdt_bootcause(void) -+static int mt7621_wdt_bootcause(struct mt7621_wdt_data *d) - { -- if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE) -+ u32 val; -+ -+ regmap_read(d->sysc, SYSC_RSTSTAT, &val); -+ if (val & WDT_RST_CAUSE) - return WDIOF_CARDRESET; - - return 0; -@@ -134,6 +138,7 @@ static const struct watchdog_ops mt7621_ - - static int mt7621_wdt_probe(struct platform_device *pdev) - { -+ struct device_node *np = pdev->dev.of_node; - struct device *dev = &pdev->dev; - struct watchdog_device *mt7621_wdt; - struct mt7621_wdt_data *drvdata; -@@ -143,6 +148,13 @@ static int mt7621_wdt_probe(struct platf - if (!drvdata) - return -ENOMEM; - -+ drvdata->sysc = syscon_regmap_lookup_by_phandle(np, "mediatek,sysctl"); -+ if (IS_ERR(drvdata->sysc)) { -+ drvdata->sysc = syscon_regmap_lookup_by_compatible("mediatek,mt7621-sysc"); -+ if (IS_ERR(drvdata->sysc)) -+ return PTR_ERR(drvdata->sysc); -+ } -+ - drvdata->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(drvdata->base)) - return PTR_ERR(drvdata->base); -@@ -158,7 +170,7 @@ static int mt7621_wdt_probe(struct platf - mt7621_wdt->max_timeout = 0xfffful / 1000; - mt7621_wdt->parent = dev; - -- mt7621_wdt->bootstatus = mt7621_wdt_bootcause(); -+ mt7621_wdt->bootstatus = mt7621_wdt_bootcause(drvdata); - - watchdog_init_timeout(mt7621_wdt, mt7621_wdt->max_timeout, dev); - watchdog_set_nowayout(mt7621_wdt, nowayout); diff --git a/target/linux/ramips/patches-6.6/010-v6.5-01-mips-pci-mt7620-do-not-print-NFTS-register-value-as-.patch b/target/linux/ramips/patches-6.6/010-v6.5-01-mips-pci-mt7620-do-not-print-NFTS-register-value-as-.patch deleted file mode 100644 index 704e861b82..0000000000 --- a/target/linux/ramips/patches-6.6/010-v6.5-01-mips-pci-mt7620-do-not-print-NFTS-register-value-as-.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 9f9a035e6156a57d9da062b26d2a48d031744a1e Mon Sep 17 00:00:00 2001 -From: Shiji Yang -Date: Tue, 20 Jun 2023 18:43:22 +0800 -Subject: [PATCH 1/2] mips: pci-mt7620: do not print NFTS register value as - error log - -These codes are used to read NFTS_TIMEOUT_DELAY register value and -write it into kernel log after writing the register. they are only -used for debugging during driver development, so there is no need -to keep them now. - -Tested on MT7628AN router Motorola MWR03. - -Signed-off-by: Shiji Yang -Reviewed-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/pci/pci-mt7620.c | 3 --- - 1 file changed, 3 deletions(-) - ---- a/arch/mips/pci/pci-mt7620.c -+++ b/arch/mips/pci/pci-mt7620.c -@@ -274,9 +274,6 @@ static int mt7628_pci_hw_init(struct pla - val |= 0x50 << 8; - pci_config_write(NULL, 0, 0x70c, 4, val); - -- pci_config_read(NULL, 0, 0x70c, 4, &val); -- dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val); -- - return 0; - } - diff --git a/target/linux/ramips/patches-6.6/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch b/target/linux/ramips/patches-6.6/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch deleted file mode 100644 index 5898a110ea..0000000000 --- a/target/linux/ramips/patches-6.6/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 89ec9bbe60b61cc6ae3eddd6d4f43e128f8a88de Mon Sep 17 00:00:00 2001 -From: Shiji Yang -Date: Tue, 20 Jun 2023 18:43:23 +0800 -Subject: [PATCH 2/2] mips: pci-mt7620: use dev_info() to log PCIe device - detection result - -Usually, We only need to print the error log when there is a PCIe card but -initialization fails. Whether the driver finds the PCIe card or not is the -expected behavior. So it's better to log these information with dev_info(). - -Tested on MT7628AN router Motorola MWR03. - -Signed-off-by: Shiji Yang -Reviewed-by: Sergio Paracuellos -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/pci/pci-mt7620.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/pci/pci-mt7620.c -+++ b/arch/mips/pci/pci-mt7620.c -@@ -331,7 +331,7 @@ static int mt7620_pci_probe(struct platf - rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); - if (ralink_soc == MT762X_SOC_MT7620A) - rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV); -- dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); -+ dev_info(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); - return -1; - } - -@@ -374,7 +374,7 @@ int pcibios_map_irq(const struct pci_dev - dev->bus->number, slot); - return 0; - } -- dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", -+ dev_info(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", - dev->bus->number, slot, irq); - - /* configure the cache line size to 0x14 */ diff --git a/target/linux/ramips/patches-6.6/110-v6.4-PCI-mt7621-Use-dev_info-to-log-PCIe-card-detection.patch b/target/linux/ramips/patches-6.6/110-v6.4-PCI-mt7621-Use-dev_info-to-log-PCIe-card-detection.patch deleted file mode 100644 index ad2191e655..0000000000 --- a/target/linux/ramips/patches-6.6/110-v6.4-PCI-mt7621-Use-dev_info-to-log-PCIe-card-detection.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 50233e105a0332ec0f3bc83180c416e6b200471e Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Fri, 24 Mar 2023 08:37:33 +0100 -Subject: PCI: mt7621: Use dev_info() to log PCIe card detection - -When there is no card plugged on a PCIe port a log reporting that -the port will be disabled is flagged as an error (dev_err()). - -Since this is not an error at all, change the log level by using -dev_info() instead. - -Link: https://lore.kernel.org/r/20230324073733.1596231-1-sergio.paracuellos@gmail.com -Signed-off-by: Sergio Paracuellos -Signed-off-by: Lorenzo Pieralisi ---- - drivers/pci/controller/pcie-mt7621.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/pci/controller/pcie-mt7621.c -+++ b/drivers/pci/controller/pcie-mt7621.c -@@ -378,8 +378,8 @@ static int mt7621_pcie_init_ports(struct - u32 slot = port->slot; - - if (!mt7621_pcie_port_is_linkup(port)) { -- dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n", -- slot); -+ dev_info(dev, "pcie%d no card, disable it (RST & CLK)\n", -+ slot); - mt7621_control_assert(port); - port->enabled = false; - num_disabled++;