From: Claudio Mignanti Date: Tue, 6 Oct 2009 09:20:30 +0000 (+0000) Subject: Improve i2c driver slave delay, thanks to Fabrizio Sciarra that provide it * support... X-Git-Tag: v19.07.0-rc1~32897 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4b724681e04edce7a9226a9fb4a67f5f8a3e78ca;p=openwrt%2Fstaging%2Fhauke.git Improve i2c driver slave delay, thanks to Fabrizio Sciarra that provide it * support for master/slave delay (provided patch) * remove some printk that spam logs * introduce new symbols ETRAX_I2C_DYN_ALLOC and ETRAX_I2C_SLAVE_DELAY * cleanup a bit the driver * dump release number SVN-Revision: 17954 --- diff --git a/target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c b/target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c index 6429401107..e47bc64592 100644 --- a/target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c +++ b/target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c @@ -9,26 +9,21 @@ *! *!***************************************************************************/ -#define DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC -//#undef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC - /******************** INCLUDE FILES SECTION ****************************/ #include #include -/**GVC**/ -#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC +#ifdef CONFIG_ETRAX_I2C_DYN_ALLOC #include /* for dev_t */ #include /* for struct cdev */ #endif -/**END GVC**/ + +#include #include "etraxi2c.h" -/**GVC**/ #include "i2c_errno.h" -/**END GVC**/ #include #include @@ -37,7 +32,7 @@ #include "i2c_gvc.h" -MODULE_DESCRIPTION( "I2C Device Driver - 1.1" ); +MODULE_DESCRIPTION( "I2C Device Driver - 2.3" ); /*!********************************************************************* *!History I2C driver Geert Vancompernolle @@ -50,25 +45,20 @@ MODULE_DESCRIPTION( "I2C Device Driver - 1.1" ); *! Changes to remove unwanted spikes at ACK/NACK time. *! *!*********************************************************************/ - + MODULE_LICENSE( "GPL" ); /****************** MACRO's **********************/ #define D( x ) -/**GVC**/ -#ifndef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC -/**END GVC**/ +#ifndef CONFIG_ETRAX_I2C_DYN_ALLOC #define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */ -/**GVC**/ #endif -/**END GVC**/ -/**GVC**/ #define WAITONEUS 1 /* Following are abbreviations taken from Philips I2C standard */ -/* Values are representing time in us and are rounded to next whole number, if relevant */ +/* Values are representing time in us and are rounded to next whole number, if relevant */ #define THDSTA 4 /* Hold delay time for (repeated) START condition */ #define TLOW 5 /* LOW period of the SCL clock */ #define THDDAT 1 /* Hold delay time for DATA: value of 0 is allowed but 1 taken to be sure */ @@ -78,11 +68,14 @@ MODULE_LICENSE( "GPL" ); #define TSUSTO 4 /* Set-up time for STOP condition */ #define TBUF 5 /* Bus-free time between STOP and START condition */ +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY +#define MAXSCLRETRIES 100 +#endif + #define MAXBUSFREERETRIES 5 #define MAXRETRIES 3 #define WRITEADDRESS_MASK ( 0xFE ) #define READADDRESS_MASK ( 0x01 ) -/**END GVC**/ #define SCL_HIGH 1 #define SCL_LOW 0 @@ -100,8 +93,8 @@ MODULE_LICENSE( "GPL" ); #define SDABIT CONFIG_ETRAX_I2C_DATA_PORT #define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT -#define i2c_enable() -#define i2c_disable() +#define i2c_enable() +#define i2c_disable() /* enable or disable output-enable, to select output or input on the i2c bus */ #define i2c_sda_dir_out() \ @@ -109,6 +102,13 @@ MODULE_LICENSE( "GPL" ); #define i2c_sda_dir_in() \ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 0 ) +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY +#define i2c_scl_dir_out() \ + REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, SCLBIT, 1 ) +#define i2c_scl_dir_in() \ + REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, SCLBIT, 0 ) +#endif + /* control the i2c clock and data signals */ #define i2c_set_scl( x ) \ REG_SHADOW_SET( R_PORT_PB_DATA, port_pb_data_shadow, SCLBIT, x ) @@ -118,10 +118,8 @@ MODULE_LICENSE( "GPL" ); /* read status of SDA bit from the i2c interface */ #define i2c_sda_is_high() ( ( ( *R_PORT_PB_READ & ( 1 << SDABIT ) ) ) >> SDABIT ) -/**GVC**/ /* read status of SCL bit from the i2c interface */ #define i2c_scl_is_high() ( ( ( *R_PORT_PB_READ & ( 1 << SCLBIT ) ) ) >> SCLBIT ) -/**END GVC**/ #else /* enable or disable the i2c interface */ @@ -131,7 +129,7 @@ MODULE_LICENSE( "GPL" ); /* enable or disable output-enable, to select output or input on the i2c bus */ #define i2c_sda_dir_out() \ *R_PORT_PB_I2C = ( port_pb_i2c_shadow &= ~IO_MASK( R_PORT_PB_I2C, i2c_oe_ ) ); \ - REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1 ); + REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1 ); #define i2c_sda_dir_in() \ *R_PORT_PB_I2C = ( port_pb_i2c_shadow |= IO_MASK( R_PORT_PB_I2C, i2c_oe_ ) ); \ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0 ); @@ -160,19 +158,13 @@ MODULE_LICENSE( "GPL" ); /****************** STATIC (file scope) VARIABLES **********************/ static DEFINE_SPINLOCK( i2c_lock ); /* Protect directions etc */ -/**GVC**/ -#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC -static const char i2c_name[] = "i2cgvc"; -#else static const char i2c_name[] = "i2c"; -#endif -/**END GVC**/ + /****************** PROTOTYPING SECTION *************************/ static int i2c_open( struct inode *inode, struct file *filp ); static int i2c_release( struct inode *inode, struct file *filp ); -/**GVC**/ static int i2c_command( unsigned char slave , unsigned char* wbuf , unsigned char wlen @@ -181,8 +173,7 @@ static int i2c_command( unsigned char slave ); static int i2c_bus_free_check( unsigned char maxretries ); static void i2c_finalise( const char* text, unsigned long irqflags ); -/**END GVC**/ - + /************************************************************************/ /****************** AUXILIARIES *************************/ @@ -195,7 +186,7 @@ static void i2c_finalise( const char* text, unsigned long irqflags ); *# DESCRIPTION : opens an I2C device *# *# PARAMETERS : *inode: reference to inode - *# *filp : reference to file pointer + *# *filp : reference to file pointer *# *#--------------------------------------------------------------------------- */ @@ -212,7 +203,7 @@ static int i2c_open( struct inode *inode, struct file *filp ) *# DESCRIPTION : Releases the I2C device *# *# PARAMETERS : *inode: reference to inode - *# *filp : reference to file pointer + *# *filp : reference to file pointer *# *#--------------------------------------------------------------------------- */ @@ -226,13 +217,13 @@ static int i2c_release( struct inode *inode, struct file *filp ) *# *# FUNCTION NAME: i2c_ioctl *# - *# DESCRIPTION : Main device API: ioctl's to write/read + *# DESCRIPTION : Main device API: ioctl's to write/read *# to/from i2c registers *# *# PARAMETERS : *inode: reference to inode - *# *filp : reference to file pointer - *# cmd : command to be executed during the ioctl call - *# arg : pointer to a structure with the data??? + *# *filp : reference to file pointer + *# cmd : command to be executed during the ioctl call + *# arg : pointer to a structure with the data??? *# *# RETURN : result of the ioctl call *# @@ -247,13 +238,13 @@ static int i2c_ioctl( struct inode *inode /* the acme ioctls */ I2C_DATA i2cdata; int RetVal = EI2CNOERRORS; - - if ( _IOC_TYPE( cmd ) != ETRAXI2C_IOCTYPE ) + + if ( _IOC_TYPE( cmd ) != ETRAXI2C_IOCTYPE ) { return ( -EINVAL ); } - - switch ( _IOC_NR( cmd ) ) + + switch ( _IOC_NR( cmd ) ) { case I2C_WRITEREG: /* write to an i2c slave */ @@ -261,24 +252,23 @@ static int i2c_ioctl( struct inode *inode , I2C_ARGREG( arg ) , I2C_ARGVALUE( arg ) ); - break; + break; case I2C_READREG: RetVal = i2c_readreg( I2C_ARGSLAVE( arg ), I2C_ARGREG( arg ) ); break; - -/**GVC**/ - /* New functions added by GVC */ + + /* New functions added by GVC */ case I2C_READ: copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) ); { int RetryCntr = MAXRETRIES; - + do { RetVal = i2c_command( i2cdata.slave , NULL - , 0 + , 0 , i2cdata.rbuf , i2cdata.rlen ); @@ -293,33 +283,33 @@ static int i2c_ioctl( struct inode *inode copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) ); { int RetryCntr = MAXRETRIES; - + do { RetVal = i2c_command( i2cdata.slave , i2cdata.wbuf , i2cdata.wlen , NULL - , 0 + , 0 ); } while ( ( EI2CNOERRORS != RetVal ) &&( --RetryCntr ) ); } break; - + case I2C_WRITEREAD: copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) ); { int RetryCntr = MAXRETRIES; - + do { RetVal = i2c_command( i2cdata.slave , i2cdata.wbuf , i2cdata.wlen , i2cdata.rbuf - , i2cdata.rlen + , i2cdata.rlen ); } while ( ( EI2CNOERRORS != RetVal ) &&( --RetryCntr ) @@ -327,12 +317,11 @@ static int i2c_ioctl( struct inode *inode } copy_to_user( (char*)arg, (char*)&i2cdata, sizeof( I2C_DATA ) ); break; -/**END GVC**/ - + default: RetVal = -EINVAL; } - + return ( -RetVal ); } /* i2c_ioctl */ @@ -342,22 +331,22 @@ static int i2c_ioctl( struct inode *inode *# FUNCTION NAME: i2c_command *# *# DESCRIPTION : general routine to read/write bytes from an I2C device - *# + *# *# 'i2c_command()' sends wlen bytes to the I2c bus and receives - *# rlen bytes from the I2c bus. + *# rlen bytes from the I2c bus. *# The data to be send must be placed in wbuf[ 0 ] upto wbuf[ wlen - 1 ). *# The data to be received is assembled in rbuf[ 0 ] upto rbuf[ rlen - 1 ]. - *# + *# *# If no data is to be sent or received, put appropriate buffer parameter *# to "NULL" and appropriate length parameter to "0". - *# + *# *# PARAMETERS : slave = slave address of the I2C device *# wbuf = address of first element of write buffer (wbuf) *# wlen = number of bytes to be written to slave *# rbuf = address of first element of read buffer (rbuf) *# rlen = number of bytes to be read from slave *# - *# RETURN : + *# RETURN : *# EI2CNOERRORS: I2C communication went fine *# EI2CBUSNFREE: I2C bus is not free *# EI2CWADDRESS: I2C write address failed @@ -374,15 +363,15 @@ static int i2c_ioctl( struct inode *inode *# EI2CNOACKNLD: I2C no acknowledge received *# *# REMARK : - *# First, the send part is completed. + *# First, the send part is completed. *# In the send routine, there is no stop generated. This is because maybe *# a repeated start condition must be generated. *# This happens when we want to receive some data from the I2c bus. If not, *# at the end of the general I2c loop the stopcondition is generated. *# If, on the contrary, there are a number of bytes to be received, a new - *# startcondition is generated in the 'if' part of the main I2c routine, - *# which controls the receiving part. - *# Only when the receiving of data is finished, a final stopcondition is + *# startcondition is generated in the 'if' part of the main I2c routine, + *# which controls the receiving part. + *# Only when the receiving of data is finished, a final stopcondition is *# generated. *# *#--------------------------------------------------------------------------- @@ -434,16 +423,16 @@ static int i2c_command( unsigned char slave /* we don't like to be interrupted */ local_irq_save( irqflags ); - /* Check if there are bytes to be send, + /* Check if there are bytes to be send, * or if you immediately want to receive data. */ if ( 0 < wlen ) { - /* start I2C communication */ + /* start I2C communication */ if ( EI2CNOERRORS != i2c_start() ) { return ( i2c_finalise( "I2C: EI2CSTRTCOND\n", irqflags ) - , EI2CSTRTCOND + , EI2CSTRTCOND ); } @@ -451,23 +440,23 @@ static int i2c_command( unsigned char slave if ( EI2CNOERRORS != i2c_outbyte( slave & WRITEADDRESS_MASK ) ) { return ( i2c_finalise( "I2C: EI2CWADDRESS\n", irqflags ) - , EI2CWADDRESS + , EI2CWADDRESS ); } while ( wlen-- ) - { + { /* send register data */ - if ( EI2CNOERRORS != i2c_outbyte( *wbuf ) ) + if ( EI2CNOERRORS != i2c_outbyte( *wbuf ) && wlen ) { return ( i2c_finalise( "I2C: EI2CSENDDATA\n", irqflags ) - , EI2CSENDDATA + , EI2CSENDDATA ); } - + wbuf++; }; - + i2c_delay( TLOW ); } @@ -481,12 +470,12 @@ static int i2c_command( unsigned char slave if ( 0 < rlen ) { /* - * Generate start condition if wlen == 0 + * Generate start condition if wlen == 0 * or repeated start condition if wlen != 0... */ if ( EI2CNOERRORS != i2c_start() ) { - return ( i2c_finalise( ( ( 0 < wlen ) + return ( i2c_finalise( ( ( 0 < wlen ) ? "I2C: EI2CRSTACOND\n" : "I2C: EI2CSTRTCOND\n" ) @@ -503,21 +492,21 @@ static int i2c_command( unsigned char slave , EI2CRADDRESS ); } - + while ( rlen-- ) { /* fetch register */ *rbuf = i2c_inbyte(); rbuf++; - + /* last received byte needs to be NACK-ed instead of ACK-ed */ if ( rlen ) { i2c_sendack(); } - else + else { - i2c_sendnack(); + i2c_sendnack(); } }; } @@ -525,15 +514,15 @@ static int i2c_command( unsigned char slave /* Generate final stop condition */ if ( EI2CNOERRORS != i2c_stop() ) { - return ( i2c_finalise( "I2C: EI2CSTOPCOND\n", irqflags ) + return ( i2c_finalise( "I2C CMD: EI2CSTOPCOND\n", irqflags ) , EI2CSTOPCOND ); - } - + } + /* enable interrupt again */ local_irq_restore( irqflags ); } - + return ( EI2CNOERRORS ); } /* i2c_command */ @@ -544,12 +533,12 @@ static int i2c_command( unsigned char slave *# *# DESCRIPTION : checks if the I2C bus is free before starting *# an I2C communication - *# + *# *# PARAMETERS : maxretries, the number of times we will try to release - *# the I2C bus + *# the I2C bus *# *# RETURN : I2cStatus_I2cBusNotFreeError in case the bus is not free, - *# I2cStatus_I2cNoError otherwise + *# I2cStatus_I2cNoError otherwise *# *#--------------------------------------------------------------------------- */ @@ -557,9 +546,9 @@ static int i2c_bus_free_check( unsigned char maxretries ) { i2c_sda_dir_in(); /* Release SDA line */ i2c_set_scl( SCL_HIGH ); /* put SCL line high */ - + i2c_delay( WAITONEUS ); - + while ( ( !i2c_sda_is_high() || !i2c_scl_is_high() ) &&( maxretries-- ) ) @@ -567,13 +556,13 @@ static int i2c_bus_free_check( unsigned char maxretries ) /* Try to release I2C bus by generating STOP conditions */ i2c_stop(); } - + if ( 0 == maxretries ) { printk( KERN_DEBUG "I2C: EI2CBUSNFREE\n" ); return ( EI2CBUSNFREE ); } - else + else { return ( EI2CNOERRORS ); } @@ -592,10 +581,10 @@ static void i2c_finalise( const char* errortxt * what I can do more for the moment... */ (void)i2c_bus_free_check( MAXBUSFREERETRIES ); -} /* i2c_finalise */ +} /* i2c_finalise */ -static struct file_operations i2c_fops = +static struct file_operations i2c_fops = { .owner = THIS_MODULE , .ioctl = i2c_ioctl @@ -623,24 +612,24 @@ int __init i2c_init( void ) static int res = 0; static int first = 1; - if ( !first ) + if ( !first ) { return res; } - + first = 0; /* Setup and enable the Port B I2C interface */ #ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C /* here, we're using the dedicated I2C pins of FoxBoard */ - if ( ( res = cris_request_io_interface( if_i2c, "I2C" ) ) ) + if ( ( res = cris_request_io_interface( if_i2c, "I2C" ) ) ) { printk( KERN_CRIT "i2c_init: Failed to get IO interface\n" ); return res; } - *R_PORT_PB_I2C = port_pb_i2c_shadow |= + *R_PORT_PB_I2C = port_pb_i2c_shadow |= IO_STATE( R_PORT_PB_I2C, i2c_en, on ) | IO_FIELD( R_PORT_PB_I2C, i2c_d, 1 ) | IO_FIELD( R_PORT_PB_I2C, i2c_set_scl, 1 ) | @@ -653,34 +642,34 @@ int __init i2c_init( void ) IO_STATE( R_PORT_PB_DIR, dir0, input ) | IO_STATE( R_PORT_PB_DIR, dir1, output ) ); #else - /* If everything goes fine, res = 0, meaning "if" fails => + /* If everything goes fine, res = 0, meaning "if" fails => * will do the "else" too and as such initialise the clock port... - * Clever trick! + * Clever trick! */ if ( ( res = cris_io_interface_allocate_pins( if_i2c , 'b' , CONFIG_ETRAX_I2C_DATA_PORT - , CONFIG_ETRAX_I2C_DATA_PORT - ) - ) - ) + , CONFIG_ETRAX_I2C_DATA_PORT + ) + ) + ) { printk( KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n" ); return ( res ); } - /* Same here...*/ + /* Same here...*/ else if ( ( res = cris_io_interface_allocate_pins( if_i2c , 'b' , CONFIG_ETRAX_I2C_CLK_PORT - , CONFIG_ETRAX_I2C_CLK_PORT - ) - ) - ) + , CONFIG_ETRAX_I2C_CLK_PORT + ) + ) + ) { cris_io_interface_free_pins( if_i2c , 'b' , CONFIG_ETRAX_I2C_DATA_PORT - , CONFIG_ETRAX_I2C_DATA_PORT + , CONFIG_ETRAX_I2C_DATA_PORT ); printk( KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n" ); } @@ -700,72 +689,70 @@ int __init i2c_init( void ) *# *#--------------------------------------------------------------------------- */ + +static struct class *i2c_class; + static int __init i2c_register( void ) { int res; -/**GVC**/ -#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC +#ifdef CONFIG_ETRAX_I2C_DYN_ALLOC dev_t devt; struct cdev *my_i2cdev = NULL; #endif -/**END GVC**/ res = i2c_init(); - + if ( res < 0 ) { return res; } - -/**GVC**/ -#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC + +#ifdef CONFIG_ETRAX_I2C_DYN_ALLOC res = alloc_chrdev_region( &devt, 0, 1, i2c_name ); - + if ( res < 0 ) { printk( KERN_DEBUG "I2C: EI2CNOMNUMBR\n" ); return ( res ); } - + my_i2cdev = cdev_alloc(); my_i2cdev->ops = &i2c_fops; my_i2cdev->owner = THIS_MODULE; - - /* make device "alive" */ + + /* make device "alive" */ res = cdev_add( my_i2cdev, devt, 1 ); - + if ( res < 0 ) - { + { printk( KERN_DEBUG "I2C: EI2CDADDFAIL\n" ); return ( res ); } + + int i2c_major = MAJOR( devt ); #else -/**END GVC**/ res = register_chrdev( I2C_MAJOR, i2c_name, &i2c_fops ); - - if ( res < 0 ) + + if ( res < 0 ) { printk( KERN_ERR "i2c: couldn't get a major number.\n" ); return res; } -/**GVC**/ + + int i2c_major = I2C_MAJOR; #endif -/**END GVC**/ - printk( KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n" ); + printk( KERN_INFO "I2C: driver v2.3, (c) 1999-2004 Axis Communications AB\n" ); + printk( KERN_INFO "I2C: Improvements by Geert Vancompernolle, Positive Going, BK srl\n" ); -/**GVC**/ - printk( KERN_INFO " ==> Improvements done by Geert Vancompernolle - December 2006\n" ); +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + printk( KERN_INFO "I2C: with master/slave delay patch\n" ); +#endif + + i2c_class = class_create (THIS_MODULE, "i2c_etrax"); + device_create (i2c_class, NULL, + MKDEV(i2c_major,0), NULL, i2c_name); -#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC - printk( KERN_INFO "I2C Major: %d / I2C Name: %s\n", MAJOR( devt ), i2c_name ); -#else -/**END GVC**/ - printk( KERN_INFO "I2C Major: %d / I2C Name: %s\n", I2C_MAJOR, i2c_name ); -/**GVC**/ -#endif -/**END GVC**/ - return ( 0 ); } /* i2c_register */ @@ -784,32 +771,32 @@ static int __init i2c_register( void ) */ int i2c_start( void ) { - /* Set SCL=1, SDA=1 */ - i2c_sda_dir_out(); - i2c_set_sda( SDA_HIGH ); - i2c_delay( WAITONEUS ); - i2c_set_scl( SCL_HIGH ); - i2c_delay( WAITONEUS ); - - /* Set SCL=1, SDA=0 */ - i2c_set_sda( SDA_LOW ); - i2c_delay( THDSTA ); - - /* Set SCL=0, SDA=0 */ - i2c_set_scl( SCL_LOW ); - /* We can take 1 us less than defined in spec (5 us), since the next action - * will be to set the dataline high or low and this action is 1 us - * before the clock is put high, so that makes our 5 us. - */ - i2c_delay( TLOW - WAITONEUS ); - - if ( i2c_sda_is_high() || i2c_scl_is_high() ) + /* Set SCL=1, SDA=1 */ + i2c_sda_dir_out(); + i2c_set_sda( SDA_HIGH ); + i2c_delay( WAITONEUS ); + i2c_set_scl( SCL_HIGH ); + i2c_delay( WAITONEUS ); + + /* Set SCL=1, SDA=0 */ + i2c_set_sda( SDA_LOW ); + i2c_delay( THDSTA ); + + /* Set SCL=0, SDA=0 */ + i2c_set_scl( SCL_LOW ); + /* We can take 1 us less than defined in spec (5 us), since the next action + * will be to set the dataline high or low and this action is 1 us + * before the clock is put high, so that makes our 5 us. + */ + i2c_delay( TLOW - WAITONEUS ); + + if ( i2c_sda_is_high() || i2c_scl_is_high() ) { - printk( KERN_DEBUG "I2C: EI2CSTRTCOND\n" ); - return ( EI2CSTRTCOND ); + printk( KERN_DEBUG "I2C: EI2CSTRTCOND\n" ); + return ( EI2CSTRTCOND ); } - - return ( EI2CNOERRORS ); + + return ( EI2CNOERRORS ); } /* i2c_start */ @@ -827,8 +814,11 @@ int i2c_start( void ) */ int i2c_stop( void ) { +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + int n=MAXSCLRETRIES; +#endif i2c_sda_dir_out(); - + /* Set SCL=0, SDA=0 */ /* Don't change order, otherwise you might generate a start condition! */ i2c_set_scl( SCL_LOW ); @@ -837,20 +827,33 @@ int i2c_stop( void ) i2c_delay( WAITONEUS ); /* Set SCL=1, SDA=0 */ + +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + i2c_set_scl( SCL_HIGH ); + i2c_scl_dir_in(); + for( ; n>0; n-- ) + { + if( i2c_scl_is_high() ) + break; + i2c_delay( TSUSTO ); + } + + i2c_scl_dir_out(); +#else i2c_set_scl( SCL_HIGH ); +#endif i2c_delay( TSUSTO ); /* Set SCL=1, SDA=1 */ i2c_set_sda( SDA_HIGH ); i2c_delay( TBUF ); - + i2c_sda_dir_in(); if ( !i2c_sda_is_high() || !i2c_scl_is_high() ) - { - printk( KERN_DEBUG "I2C: EI2CSTOPCOND\n" ); - return ( EI2CSTOPCOND ); - } + { + return ( EI2CSTOPCOND ); + } return ( EI2CNOERRORS ); } /* i2c_stop */ @@ -874,17 +877,17 @@ int i2c_outbyte( unsigned char x ) i2c_sda_dir_out(); - for ( i = 0; i < 8; i++ ) + for ( i = 0; i < 8; i++ ) { - if ( x & 0x80 ) + if ( x & 0x80 ) { i2c_set_sda( SDA_HIGH ); - } - else + } + else { i2c_set_sda( SDA_LOW ); } - + i2c_delay( TSUDAT ); i2c_set_scl( SCL_HIGH ); i2c_delay( THIGH ); @@ -901,16 +904,15 @@ int i2c_outbyte( unsigned char x ) i2c_delay( TLOW - TSUDAT - WAITONEUS ); x <<= 1; } - + /* enable input */ i2c_sda_dir_in(); - + if ( !i2c_getack() ) - { - printk( KERN_DEBUG "I2C: EI2CNOACKNLD\n" ); + { return( EI2CNOACKNLD ); - } - + } + return ( EI2CNOERRORS ); } /* i2c_outbyte */ @@ -929,6 +931,9 @@ int i2c_outbyte( unsigned char x ) */ unsigned char i2c_inbyte( void ) { +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + int n=MAXSCLRETRIES; +#endif unsigned char aBitByte = 0; unsigned char Mask = 0x80; /* !!! ATTENTION: do NOT use 'char', otherwise shifting is wrong!!! */ /* Must be UNSIGNED, not SIGNED! */ @@ -940,7 +945,20 @@ unsigned char i2c_inbyte( void ) while ( Mask != 0 ) { +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + i2c_scl_dir_in(); + for( ; n>0; n-- ) + { + if( i2c_scl_is_high() ) + break; + i2c_delay( THIGH ); + } + + i2c_set_scl( SCL_HIGH ); + i2c_scl_dir_out(); +#else i2c_set_scl( SCL_HIGH ); +#endif i2c_delay( THIGH ); if ( i2c_sda_is_high() ) @@ -978,15 +996,44 @@ unsigned char i2c_inbyte( void ) int i2c_getack( void ) { int ack = 1; +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + int n=MAXSCLRETRIES; +#endif /* generate ACK clock pulse */ i2c_set_scl( SCL_HIGH ); - + /* switch off I2C */ i2c_disable(); +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + /* set clock low */ + i2c_set_scl( SCL_LOW ); + /* now wait for ack */ i2c_delay( THIGH ); + + /* set clock as input */ + i2c_scl_dir_in(); + + /* wait for clock to rise (n=MAXSCLRETRIES) */ + for( ; n>0; n-- ) + { + if( i2c_scl_is_high() ) + break; + i2c_delay( THIGH ); + } + + i2c_set_scl( SCL_HIGH ); + + i2c_scl_dir_out(); + + i2c_delay( THIGH ); +#else + /* now wait for ack */ + i2c_delay( THIGH ); +#endif + /* check for ack: if SDA is high, then NACK, else ACK */ if ( i2c_sda_is_high() ) { @@ -996,7 +1043,7 @@ int i2c_getack( void ) { ack = 1; } - + /* end clock pulse */ i2c_enable(); i2c_set_scl( SCL_LOW ); @@ -1005,7 +1052,7 @@ int i2c_getack( void ) /* Since we "lost" already THDDAT time, we can subtract it here... */ i2c_delay( TLOW - THDDAT ); - + return ( ack ); } /* i2c_getack */ @@ -1024,6 +1071,10 @@ int i2c_getack( void ) */ void i2c_sendack( void ) { +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + int n=MAXSCLRETRIES; +#endif + /* enable output */ /* Clock has been set to TLOW already at end of i2c_inbyte() * and i2c_outbyte(), so no need to do it again. @@ -1033,8 +1084,25 @@ void i2c_sendack( void ) i2c_set_sda( SDA_LOW ); /* generate clock pulse */ i2c_delay( TSUDAT ); + +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + i2c_scl_dir_in(); + /* wait for clock to rise (n=MAXSCLRETRIES) */ + for( ; n>0; n-- ) + { + if( i2c_scl_is_high() ) + break; + i2c_delay( THIGH ); + } + i2c_set_scl( SCL_HIGH ); + i2c_scl_dir_out(); i2c_delay( THIGH ); +#else + i2c_set_scl( SCL_HIGH ); + + i2c_delay( THIGH ); +#endif i2c_set_scl( SCL_LOW ); i2c_delay( THDDAT ); /* reset data out */ @@ -1061,6 +1129,10 @@ void i2c_sendack( void ) */ void i2c_sendnack( void ) { +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + int n=MAXSCLRETRIES; +#endif + /* make sure the SDA line is set high prior to activation of the output. * this way, you avoid an unnecessary peak to ground when a NACK has to * be created. @@ -1072,13 +1144,30 @@ void i2c_sendnack( void ) /* generate clock pulse */ i2c_delay( TSUDAT ); + +#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY + i2c_scl_dir_in(); + /* wait for clock to rise (n=MAXSCLRETRIES) */ + for( ; n>0; n-- ) + { + if( i2c_scl_is_high() ) + break; + i2c_delay( THIGH ); + } + + i2c_set_scl( SCL_HIGH ); + i2c_scl_dir_out(); + i2c_delay( THIGH ); +#else i2c_set_scl( SCL_HIGH ); + i2c_delay( THIGH ); +#endif i2c_set_scl( SCL_LOW ); i2c_delay( TSUDAT ); i2c_set_sda( SDA_LOW ); i2c_delay( TLOW - TSUDAT ); - + /* There's no need to change the direction of SDA to "in" again, * since a NACK is always followed by a stop condition. * A STOP condition will put the direction of SDA back to "out" @@ -1108,7 +1197,7 @@ void i2c_sendnack( void ) */ int i2c_writereg( unsigned char theSlave , unsigned char theReg - , unsigned char theValue + , unsigned char theValue ) { int error, cntr = 3; @@ -1116,7 +1205,7 @@ int i2c_writereg( unsigned char theSlave spin_lock( &i2c_lock ); - do + do { error = 0; /* we don't like to be interrupted */ @@ -1128,24 +1217,24 @@ int i2c_writereg( unsigned char theSlave { error = 1; } - + /* now select register */ if ( EI2CNOACKNLD == i2c_outbyte( theReg ) ) { error |= 2; } - + /* send register register data */ if ( EI2CNOACKNLD == i2c_outbyte( theValue ) ) { error |= 4; } - + /* end byte stream */ i2c_stop(); /* enable interrupt again */ local_irq_restore( flags ); - + } while ( error && cntr-- ); i2c_delay( TLOW ); @@ -1163,7 +1252,7 @@ int i2c_writereg( unsigned char theSlave *# DESCRIPTION : reads the value from a certain register of an I2C device. *# Function first writes the register that it wants to read *# later on. - *# + *# *# PARAMETERS : theSlave = slave address of the I2C device *# theReg = register of the I2C device that needs to be written *# @@ -1176,7 +1265,7 @@ int i2c_writereg( unsigned char theSlave *#--------------------------------------------------------------------------- */ unsigned char i2c_readreg( unsigned char theSlave - , unsigned char theReg + , unsigned char theReg ) { unsigned char b = 0; @@ -1185,16 +1274,16 @@ unsigned char i2c_readreg( unsigned char theSlave spin_lock( &i2c_lock ); - do + do { error = 0; - + /* we don't like to be interrupted */ local_irq_save( flags ); - + /* generate start condition */ i2c_start(); - + /* send slave address */ if ( EI2CNOACKNLD == i2c_outbyte( theSlave & 0xfe ) ) { @@ -1207,18 +1296,18 @@ unsigned char i2c_readreg( unsigned char theSlave if ( EI2CNOACKNLD == i2c_outbyte( theReg ) ) { error |= 2; - } + } /* repeat start condition */ i2c_delay( TLOW ); i2c_start(); - + /* send slave address */ if ( EI2CNOACKNLD == i2c_outbyte( theSlave | 0x01 ) ) { error |= 1; } - + /* fetch register */ b = i2c_inbyte(); /* @@ -1226,13 +1315,13 @@ unsigned char i2c_readreg( unsigned char theSlave * instead of acked */ i2c_sendnack(); - + /* end sequence */ i2c_stop(); - + /* enable interrupt again */ local_irq_restore( flags ); - + } while ( error && cntr-- ); spin_unlock( &i2c_lock ); @@ -1246,7 +1335,7 @@ unsigned char i2c_readreg( unsigned char theSlave *# FUNCTION NAME: i2c_read *# *# DESCRIPTION : - *# + *# *# PARAMETERS : *# *# RETURN : @@ -1264,7 +1353,7 @@ int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen ) *# FUNCTION NAME: i2c_write *# *# DESCRIPTION : - *# + *# *# PARAMETERS : *# *# RETURN : @@ -1282,7 +1371,7 @@ int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen ) *# FUNCTION NAME: i2c_writeread *# *# DESCRIPTION : - *# + *# *# PARAMETERS : *# *# RETURN : diff --git a/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch index dc63165c5e..115fd1c9b9 100644 --- a/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch +++ b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch @@ -1,6 +1,8 @@ ---- a/arch/cris/arch-v10/drivers/Kconfig -+++ b/arch/cris/arch-v10/drivers/Kconfig -@@ -450,11 +450,18 @@ config ETRAX_I2C +Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig +=================================================================== +--- linux-2.6.30.8.orig/arch/cris/arch-v10/drivers/Kconfig 2009-10-02 11:31:49.000000000 +0200 ++++ linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig 2009-10-06 10:36:23.000000000 +0200 +@@ -450,11 +450,31 @@ i2c_arg = I2C_READARG(STA013_READ_ADDR, reg); val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); @@ -10,6 +12,19 @@ + select ETRAX_I2C_USES_PB_NOT_PB_I2C + help + Enables an I2C driver with Geert Vancompernolle improvement. ++ ++config ETRAX_I2C_SLAVE_DELAY ++ bool "I2C Slave delay support" ++ depends on ETRAX_I2C_GVC && EXPERIMENTAL ++ help ++ Enable this to enhanced master/slave dialog ++ Improvement by Positive Going (www.positivegoing.it) and BK srl (www.b-k.it) ++ ++config ETRAX_I2C_DYN_ALLOC ++ bool "I2C major device dynamic alloc" ++ depends on ETRAX_I2C_GVC && EXPERIMENTAL ++ help ++ Enable this to dynamicaly alloc major i2c device number + # this is true for most products since PB-I2C seems to be somewhat # flawed.. @@ -20,7 +35,7 @@ help Select whether to use the special I2C mode in the PB I/O register or not. This option needs to be selected in order to use some drivers -@@ -478,7 +485,7 @@ config ETRAX_I2C_CLK_PORT +@@ -478,7 +498,7 @@ config ETRAX_I2C_EEPROM bool "I2C EEPROM (non-volatile RAM) support" @@ -29,8 +44,10 @@ help Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C driver. Select size option: Probed, 2k, 8k, 16k. ---- a/arch/cris/arch-v10/drivers/Makefile -+++ b/arch/cris/arch-v10/drivers/Makefile +Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Makefile +=================================================================== +--- linux-2.6.30.8.orig/arch/cris/arch-v10/drivers/Makefile 2009-10-02 11:31:14.000000000 +0200 ++++ linux-2.6.30.8/arch/cris/arch-v10/drivers/Makefile 2009-10-02 11:31:50.000000000 +0200 @@ -4,6 +4,7 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o