From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 3 Dec 2007 22:23:21 +0000 (+0100)
Subject: hwmon: (lm85) Return standard values in pwmN_enable
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4b4df95dccdd2c6a573c9dedefb747ed663c074d;p=openwrt%2Fstaging%2Fblogic.git

hwmon: (lm85) Return standard values in pwmN_enable

The values returned by the lm85 driver in pwmN_enable sysfs files do
not match the standard. Fix that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
---

diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index a02480be65f2..194b8fb52f0e 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -519,10 +519,21 @@ static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
 {
 	int nr = to_sensor_dev_attr(attr)->index;
 	struct lm85_data *data = lm85_update_device(dev);
-	int	pwm_zone;
+	int pwm_zone, enable;
 
 	pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
-	return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) );
+	switch (pwm_zone) {
+	case -1:	/* PWM is always at 100% */
+		enable = 0;
+		break;
+	case 0:		/* PWM is always at 0% */
+	case -2:	/* PWM responds to manual control */
+		enable = 1;
+		break;
+	default:	/* PWM in automatic mode */
+		enable = 2;
+	}
+	return sprintf(buf, "%d\n", enable);
 }
 
 #define show_pwm_reg(offset)						\