From: Rafał Miłecki Date: Tue, 6 Dec 2016 18:19:53 +0000 (+0100) Subject: kernel: fix potential crash in usbport LED trigger driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4b3f9bc28d73594ca12125204ce31c39ab2b6e41;p=openwrt%2Fstaging%2Fneocturne.git kernel: fix potential crash in usbport LED trigger driver This backports upstream accepted fix. Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/generic/patches-4.4/084-0001-usb-core-Introduce-a-USB-port-LED-trigger.patch b/target/linux/generic/patches-4.4/084-0001-usb-core-Introduce-a-USB-port-LED-trigger.patch new file mode 100644 index 0000000000..68039f67bb --- /dev/null +++ b/target/linux/generic/patches-4.4/084-0001-usb-core-Introduce-a-USB-port-LED-trigger.patch @@ -0,0 +1,465 @@ +From 0f247626cbbfa2010d2b86fdee652605e084e248 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 16 Sep 2016 16:13:48 +0200 +Subject: [PATCH] usb: core: Introduce a USB port LED trigger +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This commit adds a new trigger responsible for turning on LED when USB +device gets connected to the selected USB port. This can can useful for +various home routers that have USB port(s) and a proper LED telling user +a device is connected. + +The trigger gets its documentation file but basically it just requires +enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). + +There was a long discussion on design of this driver. Its current state +is a result of picking them most adjustable solution as others couldn't +handle all cases. + +1) It wasn't possible for the driver to register separated trigger for + each USB port. Some physical USB ports are handled by more than one + controller and so by more than one USB port. E.g. USB 2.0 physical + port may be handled by OHCI's port and EHCI's port. + It's also not possible to assign more than 1 trigger to a single LED + and implementing such feature would be tricky due to syncing triggers + and sysfs conflicts with old triggers. + +2) Another idea was to register trigger per USB hub. This wouldn't allow + handling devices with multiple USB LEDs and controllers (hubs) + controlling more than 1 physical port. It's common for hubs to have + few ports and each may have its own LED. + +This final trigger is highly flexible. It allows selecting any USB ports +for any LED. It was also modified (comparing to the initial version) to +allow choosing ports rather than having user /guess/ proper names. It +was successfully tested on SmartRG SR400ac which has 3 USB LEDs, +2 physical ports and 3 controllers. + +It was noted USB subsystem already has usb-gadget and usb-host triggers +but they are pretty trivial ones. They indicate activity only and can't +have ports specified. + +In future it may be good idea to consider adding activity support to +usbport as well. This should allow switching to this more generic driver +and maybe marking old ones as obsolete. +This can be implemented with another sysfs file for setting mode. The +default mode wouldn't change so there won't be ABI breakage and so such +feature can be safely implemented later. + +There was also an idea of supporting other devices (PCI, SDIO, etc.) but +as this driver already contains some USB specific code (and will get +more) these should be probably separated drivers (triggers). + +Signed-off-by: Rafał Miłecki +Signed-off-by: Greg Kroah-Hartman +--- + .../ABI/testing/sysfs-class-led-trigger-usbport | 12 + + Documentation/leds/ledtrig-usbport.txt | 41 +++ + drivers/usb/core/Kconfig | 8 + + drivers/usb/core/Makefile | 2 + + drivers/usb/core/ledtrig-usbport.c | 314 +++++++++++++++++++++ + 5 files changed, 377 insertions(+) + create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-usbport + create mode 100644 Documentation/leds/ledtrig-usbport.txt + create mode 100644 drivers/usb/core/ledtrig-usbport.c + +--- /dev/null ++++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport +@@ -0,0 +1,12 @@ ++What: /sys/class/leds//ports/ ++Date: September 2016 ++KernelVersion: 4.9 ++Contact: linux-leds@vger.kernel.org ++ linux-usb@vger.kernel.org ++Description: ++ Every dir entry represents a single USB port that can be ++ selected for the USB port trigger. Selecting ports makes trigger ++ observing them for any connected devices and lighting on LED if ++ there are any. ++ Echoing "1" value selects USB port. Echoing "0" unselects it. ++ Current state can be also read. +--- /dev/null ++++ b/Documentation/leds/ledtrig-usbport.txt +@@ -0,0 +1,41 @@ ++USB port LED trigger ++==================== ++ ++This LED trigger can be used for signalling to the user a presence of USB device ++in a given port. It simply turns on LED when device appears and turns it off ++when it disappears. ++ ++It requires selecting USB ports that should be observed. All available ones are ++listed as separated entries in a "ports" subdirectory. Selecting is handled by ++echoing "1" to a chosen port. ++ ++Please note that this trigger allows selecting multiple USB ports for a single ++LED. This can be useful in two cases: ++ ++1) Device with single USB LED and few physical ports ++ ++In such a case LED will be turned on as long as there is at least one connected ++USB device. ++ ++2) Device with a physical port handled by few controllers ++ ++Some devices may have one controller per PHY standard. E.g. USB 3.0 physical ++port may be handled by ohci-platform, ehci-platform and xhci-hcd. If there is ++only one LED user will most likely want to assign ports from all 3 hubs. ++ ++ ++This trigger can be activated from user space on led class devices as shown ++below: ++ ++ echo usbport > trigger ++ ++This adds sysfs attributes to the LED that are documented in: ++Documentation/ABI/testing/sysfs-class-led-trigger-usbport ++ ++Example use-case: ++ ++ echo usbport > trigger ++ echo 1 > ports/usb1-port1 ++ echo 1 > ports/usb2-port1 ++ cat ports/usb1-port1 ++ echo 0 > ports/usb1-port1 +--- a/drivers/usb/core/Kconfig ++++ b/drivers/usb/core/Kconfig +@@ -103,3 +103,11 @@ config USB_ULPI_BUS + + To compile this driver as a module, choose M here: the module will + be called ulpi. ++ ++config USB_LEDS_TRIGGER_USBPORT ++ tristate "USB port LED trigger" ++ depends on USB && LEDS_TRIGGERS ++ help ++ This driver allows LEDs to be controlled by USB events. Enabling this ++ trigger allows specifying list of USB ports that should turn on LED ++ when some USB device gets connected. +--- a/drivers/usb/core/Makefile ++++ b/drivers/usb/core/Makefile +@@ -11,3 +11,5 @@ usbcore-$(CONFIG_PCI) += hcd-pci.o + usbcore-$(CONFIG_ACPI) += usb-acpi.o + + obj-$(CONFIG_USB) += usbcore.o ++ ++obj-$(CONFIG_USB_LEDS_TRIGGER_USBPORT) += ledtrig-usbport.o +--- /dev/null ++++ b/drivers/usb/core/ledtrig-usbport.c +@@ -0,0 +1,314 @@ ++/* ++ * USB port LED trigger ++ * ++ * Copyright (C) 2016 Rafał Miłecki ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++struct usbport_trig_data { ++ struct led_classdev *led_cdev; ++ struct list_head ports; ++ struct notifier_block nb; ++ int count; /* Amount of connected matching devices */ ++}; ++ ++struct usbport_trig_port { ++ struct usbport_trig_data *data; ++ struct usb_device *hub; ++ int portnum; ++ char *port_name; ++ bool observed; ++ struct device_attribute attr; ++ struct list_head list; ++}; ++ ++/*************************************** ++ * Helpers ++ ***************************************/ ++ ++/** ++ * usbport_trig_usb_dev_observed - Check if dev is connected to observed port ++ */ ++static bool usbport_trig_usb_dev_observed(struct usbport_trig_data *usbport_data, ++ struct usb_device *usb_dev) ++{ ++ struct usbport_trig_port *port; ++ ++ if (!usb_dev->parent) ++ return false; ++ ++ list_for_each_entry(port, &usbport_data->ports, list) { ++ if (usb_dev->parent == port->hub && ++ usb_dev->portnum == port->portnum) ++ return port->observed; ++ } ++ ++ return false; ++} ++ ++static int usbport_trig_usb_dev_check(struct usb_device *usb_dev, void *data) ++{ ++ struct usbport_trig_data *usbport_data = data; ++ ++ if (usbport_trig_usb_dev_observed(usbport_data, usb_dev)) ++ usbport_data->count++; ++ ++ return 0; ++} ++ ++/** ++ * usbport_trig_update_count - Recalculate amount of connected matching devices ++ */ ++static void usbport_trig_update_count(struct usbport_trig_data *usbport_data) ++{ ++ struct led_classdev *led_cdev = usbport_data->led_cdev; ++ ++ usbport_data->count = 0; ++ usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check); ++ led_cdev->brightness_set(led_cdev, ++ usbport_data->count ? LED_FULL : LED_OFF); ++} ++ ++/*************************************** ++ * Device attr ++ ***************************************/ ++ ++static ssize_t usbport_trig_port_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct usbport_trig_port *port = container_of(attr, ++ struct usbport_trig_port, ++ attr); ++ ++ return sprintf(buf, "%d\n", port->observed) + 1; ++} ++ ++static ssize_t usbport_trig_port_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t size) ++{ ++ struct usbport_trig_port *port = container_of(attr, ++ struct usbport_trig_port, ++ attr); ++ ++ if (!strcmp(buf, "0") || !strcmp(buf, "0\n")) ++ port->observed = 0; ++ else if (!strcmp(buf, "1") || !strcmp(buf, "1\n")) ++ port->observed = 1; ++ else ++ return -EINVAL; ++ ++ usbport_trig_update_count(port->data); ++ ++ return size; ++} ++ ++static struct attribute *ports_attrs[] = { ++ NULL, ++}; ++static const struct attribute_group ports_group = { ++ .name = "ports", ++ .attrs = ports_attrs, ++}; ++ ++/*************************************** ++ * Adding & removing ports ++ ***************************************/ ++ ++static int usbport_trig_add_port(struct usbport_trig_data *usbport_data, ++ struct usb_device *usb_dev, ++ const char *hub_name, int portnum) ++{ ++ struct led_classdev *led_cdev = usbport_data->led_cdev; ++ struct usbport_trig_port *port; ++ size_t len; ++ int err; ++ ++ port = kzalloc(sizeof(*port), GFP_KERNEL); ++ if (!port) { ++ err = -ENOMEM; ++ goto err_out; ++ } ++ ++ port->data = usbport_data; ++ port->hub = usb_dev; ++ port->portnum = portnum; ++ ++ len = strlen(hub_name) + 8; ++ port->port_name = kzalloc(len, GFP_KERNEL); ++ if (!port->port_name) { ++ err = -ENOMEM; ++ goto err_free_port; ++ } ++ snprintf(port->port_name, len, "%s-port%d", hub_name, portnum); ++ ++ port->attr.attr.name = port->port_name; ++ port->attr.attr.mode = S_IRUSR | S_IWUSR; ++ port->attr.show = usbport_trig_port_show; ++ port->attr.store = usbport_trig_port_store; ++ ++ err = sysfs_add_file_to_group(&led_cdev->dev->kobj, &port->attr.attr, ++ ports_group.name); ++ if (err) ++ goto err_free_port_name; ++ ++ list_add_tail(&port->list, &usbport_data->ports); ++ ++ return 0; ++ ++err_free_port_name: ++ kfree(port->port_name); ++err_free_port: ++ kfree(port); ++err_out: ++ return err; ++} ++ ++static int usbport_trig_add_usb_dev_ports(struct usb_device *usb_dev, ++ void *data) ++{ ++ struct usbport_trig_data *usbport_data = data; ++ int i; ++ ++ for (i = 1; i <= usb_dev->maxchild; i++) ++ usbport_trig_add_port(usbport_data, usb_dev, ++ dev_name(&usb_dev->dev), i); ++ ++ return 0; ++} ++ ++static void usbport_trig_remove_port(struct usbport_trig_data *usbport_data, ++ struct usbport_trig_port *port) ++{ ++ struct led_classdev *led_cdev = usbport_data->led_cdev; ++ ++ list_del(&port->list); ++ sysfs_remove_file_from_group(&led_cdev->dev->kobj, &port->attr.attr, ++ ports_group.name); ++ kfree(port->port_name); ++ kfree(port); ++} ++ ++static void usbport_trig_remove_usb_dev_ports(struct usbport_trig_data *usbport_data, ++ struct usb_device *usb_dev) ++{ ++ struct usbport_trig_port *port, *tmp; ++ ++ list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { ++ if (port->hub == usb_dev) ++ usbport_trig_remove_port(usbport_data, port); ++ } ++} ++ ++/*************************************** ++ * Init, exit, etc. ++ ***************************************/ ++ ++static int usbport_trig_notify(struct notifier_block *nb, unsigned long action, ++ void *data) ++{ ++ struct usbport_trig_data *usbport_data = ++ container_of(nb, struct usbport_trig_data, nb); ++ struct led_classdev *led_cdev = usbport_data->led_cdev; ++ struct usb_device *usb_dev = data; ++ bool observed; ++ ++ observed = usbport_trig_usb_dev_observed(usbport_data, usb_dev); ++ ++ switch (action) { ++ case USB_DEVICE_ADD: ++ usbport_trig_add_usb_dev_ports(usb_dev, usbport_data); ++ if (observed && usbport_data->count++ == 0) ++ led_cdev->brightness_set(led_cdev, LED_FULL); ++ return NOTIFY_OK; ++ case USB_DEVICE_REMOVE: ++ usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev); ++ if (observed && --usbport_data->count == 0) ++ led_cdev->brightness_set(led_cdev, LED_OFF); ++ return NOTIFY_OK; ++ } ++ ++ return NOTIFY_DONE; ++} ++ ++static void usbport_trig_activate(struct led_classdev *led_cdev) ++{ ++ struct usbport_trig_data *usbport_data; ++ int err; ++ ++ usbport_data = kzalloc(sizeof(*usbport_data), GFP_KERNEL); ++ if (!usbport_data) ++ return; ++ usbport_data->led_cdev = led_cdev; ++ ++ /* List of ports */ ++ INIT_LIST_HEAD(&usbport_data->ports); ++ err = sysfs_create_group(&led_cdev->dev->kobj, &ports_group); ++ if (err) ++ goto err_free; ++ usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports); ++ ++ /* Notifications */ ++ usbport_data->nb.notifier_call = usbport_trig_notify, ++ led_cdev->trigger_data = usbport_data; ++ usb_register_notify(&usbport_data->nb); ++ ++ led_cdev->activated = true; ++ return; ++ ++err_free: ++ kfree(usbport_data); ++} ++ ++static void usbport_trig_deactivate(struct led_classdev *led_cdev) ++{ ++ struct usbport_trig_data *usbport_data = led_cdev->trigger_data; ++ struct usbport_trig_port *port, *tmp; ++ ++ if (!led_cdev->activated) ++ return; ++ ++ list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { ++ usbport_trig_remove_port(usbport_data, port); ++ } ++ ++ usb_unregister_notify(&usbport_data->nb); ++ ++ sysfs_remove_group(&led_cdev->dev->kobj, &ports_group); ++ ++ kfree(usbport_data); ++ ++ led_cdev->activated = false; ++} ++ ++static struct led_trigger usbport_led_trigger = { ++ .name = "usbport", ++ .activate = usbport_trig_activate, ++ .deactivate = usbport_trig_deactivate, ++}; ++ ++static int __init usbport_trig_init(void) ++{ ++ return led_trigger_register(&usbport_led_trigger); ++} ++ ++static void __exit usbport_trig_exit(void) ++{ ++ led_trigger_unregister(&usbport_led_trigger); ++} ++ ++module_init(usbport_trig_init); ++module_exit(usbport_trig_exit); ++ ++MODULE_AUTHOR("Rafał Miłecki "); ++MODULE_DESCRIPTION("USB port trigger"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic/patches-4.4/084-0002-usb-core-usbport-Use-proper-LED-API-to-fix-potential.patch b/target/linux/generic/patches-4.4/084-0002-usb-core-usbport-Use-proper-LED-API-to-fix-potential.patch new file mode 100644 index 0000000000..ec41a2dc21 --- /dev/null +++ b/target/linux/generic/patches-4.4/084-0002-usb-core-usbport-Use-proper-LED-API-to-fix-potential.patch @@ -0,0 +1,70 @@ +From 89778ba335e302a450932ce5b703c1ee6216e949 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 6 Dec 2016 00:39:33 +0100 +Subject: [PATCH] usb: core: usbport: Use proper LED API to fix potential crash +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Calling brightness_set manually isn't safe as some LED drivers don't +implement this callback. The best idea is to just use a proper helper +which will fallback to the brightness_set_blocking callback if needed. + +This fixes: +[ 1461.761528] Unable to handle kernel NULL pointer dereference at virtual address 00000000 +(...) +[ 1462.117049] Backtrace: +[ 1462.119521] [] (usbport_trig_port_store [ledtrig_usbport]) from [] (dev_attr_store+0x20/0x2c) +[ 1462.129826] r7:dcabc7c0 r6:dee0ff80 r5:00000002 r4:bf228164 +[ 1462.135511] [] (dev_attr_store) from [] (sysfs_kf_write+0x48/0x4c) +[ 1462.143459] r5:00000002 r4:c023f738 +[ 1462.147049] [] (sysfs_kf_write) from [] (kernfs_fop_write+0xf8/0x1f8) +[ 1462.155258] r5:00000002 r4:df4a1000 +[ 1462.158850] [] (kernfs_fop_write) from [] (__vfs_write+0x34/0x120) +[ 1462.166800] r10:00000000 r9:dee0e000 r8:c000fc24 r7:00000002 r6:dee0ff80 r5:c01689c0 +[ 1462.174660] r4:df727a80 +[ 1462.177204] [] (__vfs_write) from [] (vfs_write+0xac/0x170) +[ 1462.184543] r9:dee0e000 r8:c000fc24 r7:dee0ff80 r6:b6f092d0 r5:df727a80 r4:00000002 +[ 1462.192319] [] (vfs_write) from [] (SyS_write+0x4c/0xa8) +[ 1462.199396] r9:dee0e000 r8:c000fc24 r7:00000002 r6:b6f092d0 r5:df727a80 r4:df727a80 +[ 1462.207174] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x3c) +[ 1462.214774] r7:00000004 r6:ffffffff r5:00000000 r4:00000000 +[ 1462.220456] Code: bad PC value +[ 1462.223560] ---[ end trace 676638a3a12c7a56 ]--- + +Reported-by: Ralph Sennhauser +Signed-off-by: Rafał Miłecki +Fixes: 0f247626cbb ("usb: core: Introduce a USB port LED trigger") +Cc: stable@vger.kernel.org # 4.9+ +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/core/ledtrig-usbport.c | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +--- a/drivers/usb/core/ledtrig-usbport.c ++++ b/drivers/usb/core/ledtrig-usbport.c +@@ -74,8 +74,7 @@ static void usbport_trig_update_count(st + + usbport_data->count = 0; + usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check); +- led_cdev->brightness_set(led_cdev, +- usbport_data->count ? LED_FULL : LED_OFF); ++ led_set_brightness(led_cdev, usbport_data->count ? LED_FULL : LED_OFF); + } + + /*************************************** +@@ -228,12 +227,12 @@ static int usbport_trig_notify(struct no + case USB_DEVICE_ADD: + usbport_trig_add_usb_dev_ports(usb_dev, usbport_data); + if (observed && usbport_data->count++ == 0) +- led_cdev->brightness_set(led_cdev, LED_FULL); ++ led_set_brightness(led_cdev, LED_FULL); + return NOTIFY_OK; + case USB_DEVICE_REMOVE: + usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev); + if (observed && --usbport_data->count == 0) +- led_cdev->brightness_set(led_cdev, LED_OFF); ++ led_set_brightness(led_cdev, LED_OFF); + return NOTIFY_OK; + } + diff --git a/target/linux/generic/patches-4.4/084-usb-core-Introduce-a-USB-port-LED-trigger.patch b/target/linux/generic/patches-4.4/084-usb-core-Introduce-a-USB-port-LED-trigger.patch deleted file mode 100644 index 68039f67bb..0000000000 --- a/target/linux/generic/patches-4.4/084-usb-core-Introduce-a-USB-port-LED-trigger.patch +++ /dev/null @@ -1,465 +0,0 @@ -From 0f247626cbbfa2010d2b86fdee652605e084e248 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 16 Sep 2016 16:13:48 +0200 -Subject: [PATCH] usb: core: Introduce a USB port LED trigger -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds a new trigger responsible for turning on LED when USB -device gets connected to the selected USB port. This can can useful for -various home routers that have USB port(s) and a proper LED telling user -a device is connected. - -The trigger gets its documentation file but basically it just requires -enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). - -There was a long discussion on design of this driver. Its current state -is a result of picking them most adjustable solution as others couldn't -handle all cases. - -1) It wasn't possible for the driver to register separated trigger for - each USB port. Some physical USB ports are handled by more than one - controller and so by more than one USB port. E.g. USB 2.0 physical - port may be handled by OHCI's port and EHCI's port. - It's also not possible to assign more than 1 trigger to a single LED - and implementing such feature would be tricky due to syncing triggers - and sysfs conflicts with old triggers. - -2) Another idea was to register trigger per USB hub. This wouldn't allow - handling devices with multiple USB LEDs and controllers (hubs) - controlling more than 1 physical port. It's common for hubs to have - few ports and each may have its own LED. - -This final trigger is highly flexible. It allows selecting any USB ports -for any LED. It was also modified (comparing to the initial version) to -allow choosing ports rather than having user /guess/ proper names. It -was successfully tested on SmartRG SR400ac which has 3 USB LEDs, -2 physical ports and 3 controllers. - -It was noted USB subsystem already has usb-gadget and usb-host triggers -but they are pretty trivial ones. They indicate activity only and can't -have ports specified. - -In future it may be good idea to consider adding activity support to -usbport as well. This should allow switching to this more generic driver -and maybe marking old ones as obsolete. -This can be implemented with another sysfs file for setting mode. The -default mode wouldn't change so there won't be ABI breakage and so such -feature can be safely implemented later. - -There was also an idea of supporting other devices (PCI, SDIO, etc.) but -as this driver already contains some USB specific code (and will get -more) these should be probably separated drivers (triggers). - -Signed-off-by: Rafał Miłecki -Signed-off-by: Greg Kroah-Hartman ---- - .../ABI/testing/sysfs-class-led-trigger-usbport | 12 + - Documentation/leds/ledtrig-usbport.txt | 41 +++ - drivers/usb/core/Kconfig | 8 + - drivers/usb/core/Makefile | 2 + - drivers/usb/core/ledtrig-usbport.c | 314 +++++++++++++++++++++ - 5 files changed, 377 insertions(+) - create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-usbport - create mode 100644 Documentation/leds/ledtrig-usbport.txt - create mode 100644 drivers/usb/core/ledtrig-usbport.c - ---- /dev/null -+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport -@@ -0,0 +1,12 @@ -+What: /sys/class/leds//ports/ -+Date: September 2016 -+KernelVersion: 4.9 -+Contact: linux-leds@vger.kernel.org -+ linux-usb@vger.kernel.org -+Description: -+ Every dir entry represents a single USB port that can be -+ selected for the USB port trigger. Selecting ports makes trigger -+ observing them for any connected devices and lighting on LED if -+ there are any. -+ Echoing "1" value selects USB port. Echoing "0" unselects it. -+ Current state can be also read. ---- /dev/null -+++ b/Documentation/leds/ledtrig-usbport.txt -@@ -0,0 +1,41 @@ -+USB port LED trigger -+==================== -+ -+This LED trigger can be used for signalling to the user a presence of USB device -+in a given port. It simply turns on LED when device appears and turns it off -+when it disappears. -+ -+It requires selecting USB ports that should be observed. All available ones are -+listed as separated entries in a "ports" subdirectory. Selecting is handled by -+echoing "1" to a chosen port. -+ -+Please note that this trigger allows selecting multiple USB ports for a single -+LED. This can be useful in two cases: -+ -+1) Device with single USB LED and few physical ports -+ -+In such a case LED will be turned on as long as there is at least one connected -+USB device. -+ -+2) Device with a physical port handled by few controllers -+ -+Some devices may have one controller per PHY standard. E.g. USB 3.0 physical -+port may be handled by ohci-platform, ehci-platform and xhci-hcd. If there is -+only one LED user will most likely want to assign ports from all 3 hubs. -+ -+ -+This trigger can be activated from user space on led class devices as shown -+below: -+ -+ echo usbport > trigger -+ -+This adds sysfs attributes to the LED that are documented in: -+Documentation/ABI/testing/sysfs-class-led-trigger-usbport -+ -+Example use-case: -+ -+ echo usbport > trigger -+ echo 1 > ports/usb1-port1 -+ echo 1 > ports/usb2-port1 -+ cat ports/usb1-port1 -+ echo 0 > ports/usb1-port1 ---- a/drivers/usb/core/Kconfig -+++ b/drivers/usb/core/Kconfig -@@ -103,3 +103,11 @@ config USB_ULPI_BUS - - To compile this driver as a module, choose M here: the module will - be called ulpi. -+ -+config USB_LEDS_TRIGGER_USBPORT -+ tristate "USB port LED trigger" -+ depends on USB && LEDS_TRIGGERS -+ help -+ This driver allows LEDs to be controlled by USB events. Enabling this -+ trigger allows specifying list of USB ports that should turn on LED -+ when some USB device gets connected. ---- a/drivers/usb/core/Makefile -+++ b/drivers/usb/core/Makefile -@@ -11,3 +11,5 @@ usbcore-$(CONFIG_PCI) += hcd-pci.o - usbcore-$(CONFIG_ACPI) += usb-acpi.o - - obj-$(CONFIG_USB) += usbcore.o -+ -+obj-$(CONFIG_USB_LEDS_TRIGGER_USBPORT) += ledtrig-usbport.o ---- /dev/null -+++ b/drivers/usb/core/ledtrig-usbport.c -@@ -0,0 +1,314 @@ -+/* -+ * USB port LED trigger -+ * -+ * Copyright (C) 2016 Rafał Miłecki -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+struct usbport_trig_data { -+ struct led_classdev *led_cdev; -+ struct list_head ports; -+ struct notifier_block nb; -+ int count; /* Amount of connected matching devices */ -+}; -+ -+struct usbport_trig_port { -+ struct usbport_trig_data *data; -+ struct usb_device *hub; -+ int portnum; -+ char *port_name; -+ bool observed; -+ struct device_attribute attr; -+ struct list_head list; -+}; -+ -+/*************************************** -+ * Helpers -+ ***************************************/ -+ -+/** -+ * usbport_trig_usb_dev_observed - Check if dev is connected to observed port -+ */ -+static bool usbport_trig_usb_dev_observed(struct usbport_trig_data *usbport_data, -+ struct usb_device *usb_dev) -+{ -+ struct usbport_trig_port *port; -+ -+ if (!usb_dev->parent) -+ return false; -+ -+ list_for_each_entry(port, &usbport_data->ports, list) { -+ if (usb_dev->parent == port->hub && -+ usb_dev->portnum == port->portnum) -+ return port->observed; -+ } -+ -+ return false; -+} -+ -+static int usbport_trig_usb_dev_check(struct usb_device *usb_dev, void *data) -+{ -+ struct usbport_trig_data *usbport_data = data; -+ -+ if (usbport_trig_usb_dev_observed(usbport_data, usb_dev)) -+ usbport_data->count++; -+ -+ return 0; -+} -+ -+/** -+ * usbport_trig_update_count - Recalculate amount of connected matching devices -+ */ -+static void usbport_trig_update_count(struct usbport_trig_data *usbport_data) -+{ -+ struct led_classdev *led_cdev = usbport_data->led_cdev; -+ -+ usbport_data->count = 0; -+ usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check); -+ led_cdev->brightness_set(led_cdev, -+ usbport_data->count ? LED_FULL : LED_OFF); -+} -+ -+/*************************************** -+ * Device attr -+ ***************************************/ -+ -+static ssize_t usbport_trig_port_show(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ struct usbport_trig_port *port = container_of(attr, -+ struct usbport_trig_port, -+ attr); -+ -+ return sprintf(buf, "%d\n", port->observed) + 1; -+} -+ -+static ssize_t usbport_trig_port_store(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t size) -+{ -+ struct usbport_trig_port *port = container_of(attr, -+ struct usbport_trig_port, -+ attr); -+ -+ if (!strcmp(buf, "0") || !strcmp(buf, "0\n")) -+ port->observed = 0; -+ else if (!strcmp(buf, "1") || !strcmp(buf, "1\n")) -+ port->observed = 1; -+ else -+ return -EINVAL; -+ -+ usbport_trig_update_count(port->data); -+ -+ return size; -+} -+ -+static struct attribute *ports_attrs[] = { -+ NULL, -+}; -+static const struct attribute_group ports_group = { -+ .name = "ports", -+ .attrs = ports_attrs, -+}; -+ -+/*************************************** -+ * Adding & removing ports -+ ***************************************/ -+ -+static int usbport_trig_add_port(struct usbport_trig_data *usbport_data, -+ struct usb_device *usb_dev, -+ const char *hub_name, int portnum) -+{ -+ struct led_classdev *led_cdev = usbport_data->led_cdev; -+ struct usbport_trig_port *port; -+ size_t len; -+ int err; -+ -+ port = kzalloc(sizeof(*port), GFP_KERNEL); -+ if (!port) { -+ err = -ENOMEM; -+ goto err_out; -+ } -+ -+ port->data = usbport_data; -+ port->hub = usb_dev; -+ port->portnum = portnum; -+ -+ len = strlen(hub_name) + 8; -+ port->port_name = kzalloc(len, GFP_KERNEL); -+ if (!port->port_name) { -+ err = -ENOMEM; -+ goto err_free_port; -+ } -+ snprintf(port->port_name, len, "%s-port%d", hub_name, portnum); -+ -+ port->attr.attr.name = port->port_name; -+ port->attr.attr.mode = S_IRUSR | S_IWUSR; -+ port->attr.show = usbport_trig_port_show; -+ port->attr.store = usbport_trig_port_store; -+ -+ err = sysfs_add_file_to_group(&led_cdev->dev->kobj, &port->attr.attr, -+ ports_group.name); -+ if (err) -+ goto err_free_port_name; -+ -+ list_add_tail(&port->list, &usbport_data->ports); -+ -+ return 0; -+ -+err_free_port_name: -+ kfree(port->port_name); -+err_free_port: -+ kfree(port); -+err_out: -+ return err; -+} -+ -+static int usbport_trig_add_usb_dev_ports(struct usb_device *usb_dev, -+ void *data) -+{ -+ struct usbport_trig_data *usbport_data = data; -+ int i; -+ -+ for (i = 1; i <= usb_dev->maxchild; i++) -+ usbport_trig_add_port(usbport_data, usb_dev, -+ dev_name(&usb_dev->dev), i); -+ -+ return 0; -+} -+ -+static void usbport_trig_remove_port(struct usbport_trig_data *usbport_data, -+ struct usbport_trig_port *port) -+{ -+ struct led_classdev *led_cdev = usbport_data->led_cdev; -+ -+ list_del(&port->list); -+ sysfs_remove_file_from_group(&led_cdev->dev->kobj, &port->attr.attr, -+ ports_group.name); -+ kfree(port->port_name); -+ kfree(port); -+} -+ -+static void usbport_trig_remove_usb_dev_ports(struct usbport_trig_data *usbport_data, -+ struct usb_device *usb_dev) -+{ -+ struct usbport_trig_port *port, *tmp; -+ -+ list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { -+ if (port->hub == usb_dev) -+ usbport_trig_remove_port(usbport_data, port); -+ } -+} -+ -+/*************************************** -+ * Init, exit, etc. -+ ***************************************/ -+ -+static int usbport_trig_notify(struct notifier_block *nb, unsigned long action, -+ void *data) -+{ -+ struct usbport_trig_data *usbport_data = -+ container_of(nb, struct usbport_trig_data, nb); -+ struct led_classdev *led_cdev = usbport_data->led_cdev; -+ struct usb_device *usb_dev = data; -+ bool observed; -+ -+ observed = usbport_trig_usb_dev_observed(usbport_data, usb_dev); -+ -+ switch (action) { -+ case USB_DEVICE_ADD: -+ usbport_trig_add_usb_dev_ports(usb_dev, usbport_data); -+ if (observed && usbport_data->count++ == 0) -+ led_cdev->brightness_set(led_cdev, LED_FULL); -+ return NOTIFY_OK; -+ case USB_DEVICE_REMOVE: -+ usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev); -+ if (observed && --usbport_data->count == 0) -+ led_cdev->brightness_set(led_cdev, LED_OFF); -+ return NOTIFY_OK; -+ } -+ -+ return NOTIFY_DONE; -+} -+ -+static void usbport_trig_activate(struct led_classdev *led_cdev) -+{ -+ struct usbport_trig_data *usbport_data; -+ int err; -+ -+ usbport_data = kzalloc(sizeof(*usbport_data), GFP_KERNEL); -+ if (!usbport_data) -+ return; -+ usbport_data->led_cdev = led_cdev; -+ -+ /* List of ports */ -+ INIT_LIST_HEAD(&usbport_data->ports); -+ err = sysfs_create_group(&led_cdev->dev->kobj, &ports_group); -+ if (err) -+ goto err_free; -+ usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports); -+ -+ /* Notifications */ -+ usbport_data->nb.notifier_call = usbport_trig_notify, -+ led_cdev->trigger_data = usbport_data; -+ usb_register_notify(&usbport_data->nb); -+ -+ led_cdev->activated = true; -+ return; -+ -+err_free: -+ kfree(usbport_data); -+} -+ -+static void usbport_trig_deactivate(struct led_classdev *led_cdev) -+{ -+ struct usbport_trig_data *usbport_data = led_cdev->trigger_data; -+ struct usbport_trig_port *port, *tmp; -+ -+ if (!led_cdev->activated) -+ return; -+ -+ list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { -+ usbport_trig_remove_port(usbport_data, port); -+ } -+ -+ usb_unregister_notify(&usbport_data->nb); -+ -+ sysfs_remove_group(&led_cdev->dev->kobj, &ports_group); -+ -+ kfree(usbport_data); -+ -+ led_cdev->activated = false; -+} -+ -+static struct led_trigger usbport_led_trigger = { -+ .name = "usbport", -+ .activate = usbport_trig_activate, -+ .deactivate = usbport_trig_deactivate, -+}; -+ -+static int __init usbport_trig_init(void) -+{ -+ return led_trigger_register(&usbport_led_trigger); -+} -+ -+static void __exit usbport_trig_exit(void) -+{ -+ led_trigger_unregister(&usbport_led_trigger); -+} -+ -+module_init(usbport_trig_init); -+module_exit(usbport_trig_exit); -+ -+MODULE_AUTHOR("Rafał Miłecki "); -+MODULE_DESCRIPTION("USB port trigger"); -+MODULE_LICENSE("GPL v2");