From: Dave Chinner <dchinner@redhat.com>
Date: Tue, 21 May 2013 08:02:03 +0000 (+1000)
Subject: xfs: remote attribute tail zeroing does too much
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4af3644c9a53eb2f1ecf69cc53576561b64be4c6;p=openwrt%2Fstaging%2Fblogic.git

xfs: remote attribute tail zeroing does too much

When an attribute data does not fill then entire remote block, we
zero the remaining part of the buffer. This, however, needs to take
into account that the buffer has a header, and so the offset where
zeroing starts and the length of zeroing need to take this into
account. Otherwise we end up with zeros over the end of the
attribute value when CRCs are enabled.

While there, make sure we only ask to map an extent that covers the
remaining range of the attribute, rather than asking every time for
the full length of remote data. If the remote attribute blocks are
contiguous with other parts of the attribute tree, it will map those
blocks as well and we can potentially zero them incorrectly. We can
also get buffer size mistmatches when trying to read or remove the
remote attribute, and this can lead to not finding the correct
buffer when looking it up in cache.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
---

diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c
index bcdc07c4e8f4..e207bf0004b6 100644
--- a/fs/xfs/xfs_attr_remote.c
+++ b/fs/xfs/xfs_attr_remote.c
@@ -296,10 +296,7 @@ xfs_attr_rmtval_set(
 	 * and we may not need that many, so we have to handle this when
 	 * allocating the blocks below. 
 	 */
-	if (!crcs)
-		blkcnt = XFS_B_TO_FSB(mp, args->valuelen);
-	else
-		blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen);
+	blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen);
 
 	error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff,
 						   XFS_ATTR_FORK);
@@ -394,8 +391,11 @@ xfs_attr_rmtval_set(
 	 */
 	lblkno = args->rmtblkno;
 	valuelen = args->valuelen;
+	blkcnt = args->rmtblkcnt;
 	while (valuelen > 0) {
 		int	byte_cnt;
+		int	hdr_size;
+		int	dblkcnt;
 		char	*buf;
 
 		/*
@@ -404,7 +404,7 @@ xfs_attr_rmtval_set(
 		xfs_bmap_init(args->flist, args->firstblock);
 		nmap = 1;
 		error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno,
-				       args->rmtblkcnt, &map, &nmap,
+				       blkcnt, &map, &nmap,
 				       XFS_BMAPI_ATTRFORK);
 		if (error)
 			return(error);
@@ -413,26 +413,25 @@ xfs_attr_rmtval_set(
 		       (map.br_startblock != HOLESTARTBLOCK));
 
 		dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock),
-		blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount);
+		dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount);
 
-		bp = xfs_buf_get(mp->m_ddev_targp, dblkno, blkcnt, 0);
+		bp = xfs_buf_get(mp->m_ddev_targp, dblkno, dblkcnt, 0);
 		if (!bp)
 			return ENOMEM;
 		bp->b_ops = &xfs_attr3_rmt_buf_ops;
-
-		byte_cnt = BBTOB(bp->b_length);
-		byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt);
-		if (valuelen < byte_cnt)
-			byte_cnt = valuelen;
-
 		buf = bp->b_addr;
-		buf += xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset,
+
+		byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length));
+		byte_cnt = min_t(int, valuelen, byte_cnt);
+		hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset,
 					     byte_cnt, bp);
-		memcpy(buf, src, byte_cnt);
+		ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length));
 
-		if (byte_cnt < BBTOB(bp->b_length))
-			xfs_buf_zero(bp, byte_cnt,
-				     BBTOB(bp->b_length) - byte_cnt);
+		memcpy(buf + hdr_size, src, byte_cnt);
+
+		if (byte_cnt + hdr_size < BBTOB(bp->b_length))
+			xfs_buf_zero(bp, byte_cnt + hdr_size,
+				     BBTOB(bp->b_length) - byte_cnt - hdr_size);
 
 		error = xfs_bwrite(bp);	/* GROT: NOTE: synchronous write */
 		xfs_buf_relse(bp);
@@ -442,9 +441,9 @@ xfs_attr_rmtval_set(
 		src += byte_cnt;
 		valuelen -= byte_cnt;
 		offset += byte_cnt;
-		hdrcnt--;
 
 		lblkno += map.br_blockcount;
+		blkcnt -= map.br_blockcount;
 	}
 	ASSERT(valuelen == 0);
 	return 0;