From: John Crispin Date: Wed, 18 Feb 2015 13:35:46 +0000 (+0000) Subject: at91: bump to v3.18 X-Git-Tag: reboot~4231 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4a6e4685884e4b9542ca660be7948d48810d8788;p=openwrt%2Fstaging%2Fjogo.git at91: bump to v3.18 Signed-off-by: Your Name SVN-Revision: 44489 --- diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile index 27ee330026..040df33300 100644 --- a/target/linux/at91/Makefile +++ b/target/linux/at91/Makefile @@ -13,7 +13,7 @@ BOARDNAME:=Atmel AT91 FEATURES:=squashfs targz ext2 usb SUBTARGETS:=legacy sama5d3 -KERNEL_PATCHVER:=3.14 +KERNEL_PATCHVER:=3.18 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/at91/config-default b/target/linux/at91/config-default index 6ed83c8e74..89a9fc2147 100644 --- a/target/linux/at91/config-default +++ b/target/linux/at91/config-default @@ -171,6 +171,10 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y # CONFIG_PINCTRL_SINGLE is not set CONFIG_PINMUX=y +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set # CONFIG_PREEMPT_RCU is not set CONFIG_PROC_DEVICETREE=y # CONFIG_RCU_STALL_COMMON is not set @@ -210,6 +214,7 @@ CONFIG_USB_ETH=y # CONFIG_USB_ETH_EEM is not set CONFIG_USB_ETH_RNDIS=y CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_XILINX is not set CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_SUPPORT=y CONFIG_USE_OF=y diff --git a/target/linux/at91/files-3.14/arch/arm/boot/dts/lmu5000.dts b/target/linux/at91/files-3.14/arch/arm/boot/dts/lmu5000.dts deleted file mode 100644 index 921d44beec..0000000000 --- a/target/linux/at91/files-3.14/arch/arm/boot/dts/lmu5000.dts +++ /dev/null @@ -1,125 +0,0 @@ -/* - * lmu5000.dst - Device Tree file for CalAmp LMU5000 board - * - * Copyright (C) 2013 Adam Porter - * - * Licensed under GPLv2. - */ -/dts-v1/; -#include "at91sam9g20.dtsi" - -/ { - model = "CalAmp LMU5000"; - compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2"; - }; - - memory { - reg = <0x20000000 0x4000000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - pinctrl@fffff400 { - board { - pinctrl_pck0_as_mck: pck0_as_mck { - atmel,pins = - <2 1 0x2 0x0>; /* PC1 periph B */ - }; - - }; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@fffb0000 { - pinctrl-0 = - <&pinctrl_usart0 - &pinctrl_usart0_rts - &pinctrl_usart0_cts - &pinctrl_usart0_dtr_dsr - &pinctrl_usart0_dcd - &pinctrl_usart0_ri>; - status = "okay"; - }; - - usart2: serial@fffb8000 { - status = "okay"; - }; - - uart0: serial@fffd4000 { - status = "okay"; - }; - - uart1: serial@fffd8000 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "mii"; - status = "okay"; - }; - - usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; - status = "okay"; - }; - - ssc0: ssc@fffbc000 { - status = "okay"; - pinctrl-0 = <&pinctrl_ssc0_tx>; - }; - - watchdog@fffffd40 { - status = "okay"; - }; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - status = "okay"; - - kernel@0 { - label = "kernel"; - reg = <0x0 0x400000>; - }; - - rootfs@400000 { - label = "rootfs"; - reg = <0x400000 0x3C00000>; - }; - - user1@4000000 { - label = "user1"; - reg = <0x4000000 0x2000000>; - }; - - user2@6000000 { - label = "user2"; - reg = <0x6000000 0x2000000>; - }; - }; - - usb0: ohci@00500000 { - num-ports = <2>; - status = "okay"; - }; - }; -}; diff --git a/target/linux/at91/files-3.14/drivers/mtd/at91part.c b/target/linux/at91/files-3.14/drivers/mtd/at91part.c deleted file mode 100644 index 31f3bbd69d..0000000000 --- a/target/linux/at91/files-3.14/drivers/mtd/at91part.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Atmel AT91 flash partition table. (Modified by Hamish Guthrie). - * Based on ar7 map by Felix Fietkau. - * - */ - -#include -#include - -#include -#include -#include -#include - -static struct mtd_partition at91_parts[6]; - -static int create_mtd_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long origin) -{ - unsigned int offset, len; - unsigned int pre_size = 0x42000, root_max = 0x362400; - unsigned char buf[512]; - struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; - - printk("Parsing AT91 partition map...\n"); - - at91_parts[0].name = "loaders"; - at91_parts[0].offset = 0; - at91_parts[0].size = 0x21000; - at91_parts[0].mask_flags = MTD_WRITEABLE; - - at91_parts[1].name = "ubparams"; - at91_parts[1].offset = 0x21000; - at91_parts[1].size = 0x8400; - at91_parts[1].mask_flags = 0; - - at91_parts[2].name = "kernel"; - at91_parts[2].offset = pre_size; - at91_parts[2].size = 0; - at91_parts[2].mask_flags = 0; - - at91_parts[3].name = "rootfs"; - at91_parts[3].offset = 0; - at91_parts[3].size = 0; - at91_parts[3].mask_flags = 0; - - for(offset = pre_size; offset < root_max; offset += master->erasesize) { - - memset(&buf, 0xe5, sizeof(buf)); - - if (master->read(master, offset, sizeof(buf), &len, buf) || len != sizeof(buf)) - break; - - if (*((__u32 *) buf) == SQUASHFS_MAGIC) { - printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", - master->name, (u32) sb->bytes_used); - - at91_parts[3].size = sb->bytes_used; - at91_parts[3].offset = offset; - len = at91_parts[3].offset + at91_parts[3].size; - len = ((len / (master->erasesize * 8)) + 1) * master->erasesize * 8; - at91_parts[3].size = len - at91_parts[3].offset; - at91_parts[2].size = offset - at91_parts[2].offset; - break; - } - } - - if (at91_parts[3].size == 0) { - printk(KERN_NOTICE "%s: Couldn't find root filesystem\n", master->name); - return -1; - } - - at91_parts[4].name = "rootfs_data"; - at91_parts[4].offset = root_max; - at91_parts[4].size = master->size - root_max; - at91_parts[4].mask_flags = 0; - - at91_parts[5].name = "complete"; - at91_parts[5].offset = 0; - at91_parts[5].size = master->size; - at91_parts[5].mask_flags = 0; - - *pparts = at91_parts; - return 6; -} - -static struct mtd_part_parser at91_parser = { - .owner = THIS_MODULE, - .parse_fn = create_mtd_partitions, - .name = "at91part", -}; - -static int __init at91_parser_init(void) -{ - register_mtd_parser(&at91_parser); - - return 0; -} - -module_init(at91_parser_init); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Felix Fietkau, Eugene Konev, Hamish Guthrie"); -MODULE_DESCRIPTION("MTD partitioning for Atmel at91"); diff --git a/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts b/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts new file mode 100644 index 0000000000..921d44beec --- /dev/null +++ b/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts @@ -0,0 +1,125 @@ +/* + * lmu5000.dst - Device Tree file for CalAmp LMU5000 board + * + * Copyright (C) 2013 Adam Porter + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "CalAmp LMU5000"; + compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = + <2 1 0x2 0x0>; /* PC1 periph B */ + }; + + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + usart2: serial@fffb8000 { + status = "okay"; + }; + + uart0: serial@fffd4000 { + status = "okay"; + }; + + uart1: serial@fffd8000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "mii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + + ssc0: ssc@fffbc000 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + kernel@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + user1@4000000 { + label = "user1"; + reg = <0x4000000 0x2000000>; + }; + + user2@6000000 { + label = "user2"; + reg = <0x6000000 0x2000000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; +}; diff --git a/target/linux/at91/files/drivers/mtd/at91part.c b/target/linux/at91/files/drivers/mtd/at91part.c new file mode 100644 index 0000000000..31f3bbd69d --- /dev/null +++ b/target/linux/at91/files/drivers/mtd/at91part.c @@ -0,0 +1,122 @@ +/* + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Atmel AT91 flash partition table. (Modified by Hamish Guthrie). + * Based on ar7 map by Felix Fietkau. + * + */ + +#include +#include + +#include +#include +#include +#include + +static struct mtd_partition at91_parts[6]; + +static int create_mtd_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + unsigned long origin) +{ + unsigned int offset, len; + unsigned int pre_size = 0x42000, root_max = 0x362400; + unsigned char buf[512]; + struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; + + printk("Parsing AT91 partition map...\n"); + + at91_parts[0].name = "loaders"; + at91_parts[0].offset = 0; + at91_parts[0].size = 0x21000; + at91_parts[0].mask_flags = MTD_WRITEABLE; + + at91_parts[1].name = "ubparams"; + at91_parts[1].offset = 0x21000; + at91_parts[1].size = 0x8400; + at91_parts[1].mask_flags = 0; + + at91_parts[2].name = "kernel"; + at91_parts[2].offset = pre_size; + at91_parts[2].size = 0; + at91_parts[2].mask_flags = 0; + + at91_parts[3].name = "rootfs"; + at91_parts[3].offset = 0; + at91_parts[3].size = 0; + at91_parts[3].mask_flags = 0; + + for(offset = pre_size; offset < root_max; offset += master->erasesize) { + + memset(&buf, 0xe5, sizeof(buf)); + + if (master->read(master, offset, sizeof(buf), &len, buf) || len != sizeof(buf)) + break; + + if (*((__u32 *) buf) == SQUASHFS_MAGIC) { + printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", + master->name, (u32) sb->bytes_used); + + at91_parts[3].size = sb->bytes_used; + at91_parts[3].offset = offset; + len = at91_parts[3].offset + at91_parts[3].size; + len = ((len / (master->erasesize * 8)) + 1) * master->erasesize * 8; + at91_parts[3].size = len - at91_parts[3].offset; + at91_parts[2].size = offset - at91_parts[2].offset; + break; + } + } + + if (at91_parts[3].size == 0) { + printk(KERN_NOTICE "%s: Couldn't find root filesystem\n", master->name); + return -1; + } + + at91_parts[4].name = "rootfs_data"; + at91_parts[4].offset = root_max; + at91_parts[4].size = master->size - root_max; + at91_parts[4].mask_flags = 0; + + at91_parts[5].name = "complete"; + at91_parts[5].offset = 0; + at91_parts[5].size = master->size; + at91_parts[5].mask_flags = 0; + + *pparts = at91_parts; + return 6; +} + +static struct mtd_part_parser at91_parser = { + .owner = THIS_MODULE, + .parse_fn = create_mtd_partitions, + .name = "at91part", +}; + +static int __init at91_parser_init(void) +{ + register_mtd_parser(&at91_parser); + + return 0; +} + +module_init(at91_parser_init); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Felix Fietkau, Eugene Konev, Hamish Guthrie"); +MODULE_DESCRIPTION("MTD partitioning for Atmel at91"); diff --git a/target/linux/at91/patches-3.14/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches-3.14/100-ARM-at91-build-dtb-for-LMU5000.patch deleted file mode 100644 index e8cc68d13d..0000000000 --- a/target/linux/at91/patches-3.14/100-ARM-at91-build-dtb-for-LMU5000.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb - dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb - # sam9g45 - dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb -+dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb - dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb - # sam9n12 - dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb diff --git a/target/linux/at91/patches-3.14/805-free_some_portc_pins.patch b/target/linux/at91/patches-3.14/805-free_some_portc_pins.patch deleted file mode 100644 index a9694d1f01..0000000000 --- a/target/linux/at91/patches-3.14/805-free_some_portc_pins.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/mach-at91/at91sam9260_devices.c -+++ b/arch/arm/mach-at91/at91sam9260_devices.c -@@ -507,7 +507,7 @@ static struct platform_device at91sam926 - .num_resources = ARRAY_SIZE(spi1_resources), - }; - --static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; -+static const unsigned spi1_standard_cs[2] = { AT91_PIN_PB3, AT91_PIN_PC5 }; - - void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) - { diff --git a/target/linux/at91/patches-3.14/901-AT91-flexibity-default-leds-to-heartbeat.patch b/target/linux/at91/patches-3.14/901-AT91-flexibity-default-leds-to-heartbeat.patch deleted file mode 100644 index a97850ac91..0000000000 --- a/target/linux/at91/patches-3.14/901-AT91-flexibity-default-leds-to-heartbeat.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/arm/mach-at91/board-flexibity.c -+++ b/arch/arm/mach-at91/board-flexibity.c -@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[] - .name = "usb1:green", - .gpio = AT91_PIN_PA12, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb1:red", - .gpio = AT91_PIN_PA13, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb2:green", - .gpio = AT91_PIN_PB26, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb2:red", - .gpio = AT91_PIN_PB27, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb3:green", - .gpio = AT91_PIN_PC8, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb3:red", - .gpio = AT91_PIN_PC6, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb4:green", - .gpio = AT91_PIN_PB4, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - }, - { - .name = "usb4:red", - .gpio = AT91_PIN_PB5, - .active_low = 1, -- .default_trigger = "default-on", -+ .default_trigger = "heartbeat", - } - }; - diff --git a/target/linux/at91/patches/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches/100-ARM-at91-build-dtb-for-LMU5000.patch new file mode 100644 index 0000000000..e8cc68d13d --- /dev/null +++ b/target/linux/at91/patches/100-ARM-at91-build-dtb-for-LMU5000.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb + dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb + # sam9g45 + dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb ++dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb + dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb + # sam9n12 + dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb diff --git a/target/linux/at91/patches/805-free_some_portc_pins.patch b/target/linux/at91/patches/805-free_some_portc_pins.patch new file mode 100644 index 0000000000..a9694d1f01 --- /dev/null +++ b/target/linux/at91/patches/805-free_some_portc_pins.patch @@ -0,0 +1,11 @@ +--- a/arch/arm/mach-at91/at91sam9260_devices.c ++++ b/arch/arm/mach-at91/at91sam9260_devices.c +@@ -507,7 +507,7 @@ static struct platform_device at91sam926 + .num_resources = ARRAY_SIZE(spi1_resources), + }; + +-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; ++static const unsigned spi1_standard_cs[2] = { AT91_PIN_PB3, AT91_PIN_PC5 }; + + void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) + { diff --git a/target/linux/at91/patches/901-AT91-flexibity-default-leds-to-heartbeat.patch b/target/linux/at91/patches/901-AT91-flexibity-default-leds-to-heartbeat.patch new file mode 100644 index 0000000000..a97850ac91 --- /dev/null +++ b/target/linux/at91/patches/901-AT91-flexibity-default-leds-to-heartbeat.patch @@ -0,0 +1,60 @@ +--- a/arch/arm/mach-at91/board-flexibity.c ++++ b/arch/arm/mach-at91/board-flexibity.c +@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[] + .name = "usb1:green", + .gpio = AT91_PIN_PA12, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb1:red", + .gpio = AT91_PIN_PA13, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb2:green", + .gpio = AT91_PIN_PB26, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb2:red", + .gpio = AT91_PIN_PB27, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb3:green", + .gpio = AT91_PIN_PC8, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb3:red", + .gpio = AT91_PIN_PC6, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb4:green", + .gpio = AT91_PIN_PB4, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + }, + { + .name = "usb4:red", + .gpio = AT91_PIN_PB5, + .active_low = 1, +- .default_trigger = "default-on", ++ .default_trigger = "heartbeat", + } + }; + diff --git a/target/linux/at91/sama5d3/config-default b/target/linux/at91/sama5d3/config-default index 2cdd3819b8..62aef01668 100644 --- a/target/linux/at91/sama5d3/config-default +++ b/target/linux/at91/sama5d3/config-default @@ -2,6 +2,7 @@ CONFIG_SOC_SAMA5=y # CONFIG_SOC_SAM_V4_V5 is not set CONFIG_SOC_SAM_V7=y CONFIG_SOC_SAMA5D3=y +CONFIG_SOC_SAMA5D4=y CONFIG_MACH_SAMA5_DT=y # CONFIG_ARM_LPAE is not set # CONFIG_ARM_THUMBEE is not set