From: Michael Pratt Date: Thu, 25 Feb 2021 03:55:09 +0000 (-0500) Subject: ath79: remove 'fakeroot' for Senao devices X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4a0cc5d4ef29a11914850c72158aca1e2a170fb0;p=openwrt%2Fstaging%2Fblogic.git ath79: remove 'fakeroot' for Senao devices By using the same custom kernel header magic in both OKLI lzma-loader, DTS, and makefile this hack is not necessary anymore However, "rootfs" size and checksum must now be supplied by the factory.bin image through a script that is accepted by the OEM upgrade script. This is because Senao OEM scripts assume a squashfs header exists at the offset for the original "rootfs" partition which is actually the kernel + rootfs in this implementation, and takes size value from the header that would be there with hexdump, but this offset is now the uImage header instead. This frees up 1 eraseblock previously used by the "fakeroot" partition for bypassing the OEM image verification. Also, these Senao devices with a 'failsafe' partition and the tar-gz factory.bin platform would otherwise require flashing the new tar-gz sysupgrade.bin afterward. So this also prevents having to flash both images when starting from OEM or 'failsafe' the OEM upgrade script verifies the header magic numbers, but only the first two bytes. Example: [ "${magic_word_kernel}" = "2705" ] && [ "${magic_word_rootfs}" = "7371" -o "${magic_word_rootfs}" = "6873" ] && errcode="0" therefore picked the magic number 0x73714f4b which is 'sqOK' Signed-off-by: Michael Pratt --- diff --git a/target/linux/ath79/dts/ar724x_senao_loader.dtsi b/target/linux/ath79/dts/ar724x_senao_loader.dtsi index fdc2726e6f24..54dbec18b369 100644 --- a/target/linux/ath79/dts/ar724x_senao_loader.dtsi +++ b/target/linux/ath79/dts/ar724x_senao_loader.dtsi @@ -15,7 +15,7 @@ partition@0 { compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = ; + openwrt,ih-magic = <0x73714f4b>; label = "firmware"; reg = <0x0 0x0>; }; @@ -64,15 +64,9 @@ reg = <0xb0000 0xf0000>; }; - partition@1a0000 { - label = "fakeroot"; - reg = <0x1a0000 0x10000>; - read-only; - }; - - fwconcat0: partition@1b0000 { + fwconcat0: partition@1a0000 { label = "fwconcat0"; - reg = <0x1b0000 0x4c0000>; + reg = <0x1a0000 0x4d0000>; }; partition@670000 { diff --git a/target/linux/ath79/dts/ar934x_senao_loader.dtsi b/target/linux/ath79/dts/ar934x_senao_loader.dtsi index aa8a36d24263..35e5f135350c 100644 --- a/target/linux/ath79/dts/ar934x_senao_loader.dtsi +++ b/target/linux/ath79/dts/ar934x_senao_loader.dtsi @@ -15,7 +15,7 @@ partition@0 { compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = ; + openwrt,ih-magic = <0x73714f4b>; label = "firmware"; reg = <0x0 0x0>; }; @@ -68,15 +68,9 @@ reg = <0x0b0000 0x170000>; }; - partition@220000 { - label = "fakeroot"; - reg = <0x220000 0x010000>; - read-only; - }; - - fwconcat0: partition@230000 { + fwconcat0: partition@220000 { label = "fwconcat0"; - reg = <0x230000 0xbc0000>; + reg = <0x220000 0xbd0000>; }; partition@df0000 { diff --git a/target/linux/ath79/dts/qca955x_senao_loader.dtsi b/target/linux/ath79/dts/qca955x_senao_loader.dtsi index 3f5fc0e9382d..77eabde80afa 100644 --- a/target/linux/ath79/dts/qca955x_senao_loader.dtsi +++ b/target/linux/ath79/dts/qca955x_senao_loader.dtsi @@ -17,7 +17,7 @@ partition@0 { compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = ; + openwrt,ih-magic = <0x73714f4b>; label = "firmware"; reg = <0x0 0x0>; }; @@ -66,15 +66,9 @@ reg = <0x0b0000 0x170000>; }; - partition@220000 { - label = "fakeroot"; - reg = <0x220000 0x010000>; - read-only; - }; - - fwconcat0: partition@230000 { + fwconcat0: partition@220000 { label = "fwconcat0"; - reg = <0x230000 0xb40000>; + reg = <0x220000 0xb50000>; }; partition@d70000 { diff --git a/target/linux/ath79/image/common-senao.mk b/target/linux/ath79/image/common-senao.mk index dd1a53c969c4..9b5903d8e7ca 100644 --- a/target/linux/ath79/image/common-senao.mk +++ b/target/linux/ath79/image/common-senao.mk @@ -3,30 +3,37 @@ DEVICE_VARS += SENAO_IMGNAME # This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to # sysupgrade, as otherwise it will implant the old configuration from # OEM firmware when writing rootfs from factory.bin +# rootfs size and checksum is taken from a squashfs header +# the header does not exist, therefore, supply the size and md5 define Build/senao-tar-gz -[ -f "$@" ] && \ mkdir -p $@.tmp && \ touch $@.tmp/failsafe.bin && \ echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \ echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \ + echo -n $$(( $$(cat $@ | wc -c) / 4096 * 4096 )) > $@.len && \ + dd if=$@ bs=$$(cat $@.len) count=1 | md5sum - | cut -d ' ' -f 1 > $@.md5 && \ + echo '#!/bin/sh' > $@.tmp/after-upgrade.sh && \ + printf 'fw_setenv rootfs_size 0x%08x\n' $$(cat $@.len) >> $@.tmp/after-upgrade.sh && \ + printf 'fw_setenv rootfs_checksum %s\n' $$(cat $@.md5) >> $@.tmp/after-upgrade.sh && \ $(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \ $@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \ $(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \ $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ -C $@.tmp . | gzip -9n > $@ && \ - rm -rf $@.tmp + rm -rf $@.tmp $@.len $@.md5 endef define Device/senao_loader_okli - KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x73714f4b + LOADER_KERNEL_MAGIC := 0x73714f4b LOADER_TYPE := bin COMPILE := loader-$(1).bin loader-$(1).uImage COMPILE/loader-$(1).bin := loader-okli-compile COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \ uImage lzma IMAGES += factory.bin - IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \ - append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \ + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \ check-size | senao-tar-gz $$$$(SENAO_IMGNAME) endef diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index f358d4406443..bda47ce74da3 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -994,8 +994,8 @@ define Device/engenius_eap1200h DEVICE_VENDOR := EnGenius DEVICE_MODEL := EAP1200H DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct - IMAGE_SIZE := 11520k - LOADER_FLASH_OFFS := 0x230000 + IMAGE_SIZE := 11584k + LOADER_FLASH_OFFS := 0x220000 SENAO_IMGNAME := ar71xx-generic-eap1200h endef TARGET_DEVICES += engenius_eap1200h @@ -1006,8 +1006,8 @@ define Device/engenius_eap300-v2 DEVICE_VENDOR := EnGenius DEVICE_MODEL := EAP300 DEVICE_VARIANT := v2 - IMAGE_SIZE := 12032k - LOADER_FLASH_OFFS := 0x230000 + IMAGE_SIZE := 12096k + LOADER_FLASH_OFFS := 0x220000 SENAO_IMGNAME := senao-eap300v2 endef TARGET_DEVICES += engenius_eap300-v2 @@ -1017,8 +1017,8 @@ define Device/engenius_eap600 SOC := ar9344 DEVICE_VENDOR := EnGenius DEVICE_MODEL := EAP600 - IMAGE_SIZE := 12032k - LOADER_FLASH_OFFS := 0x230000 + IMAGE_SIZE := 12096k + LOADER_FLASH_OFFS := 0x220000 SENAO_IMGNAME := senao-eap600 endef TARGET_DEVICES += engenius_eap600 @@ -1054,8 +1054,8 @@ define Device/engenius_ecb600 SOC := ar9344 DEVICE_VENDOR := EnGenius DEVICE_MODEL := ECB600 - IMAGE_SIZE := 12032k - LOADER_FLASH_OFFS := 0x230000 + IMAGE_SIZE := 12096k + LOADER_FLASH_OFFS := 0x220000 SENAO_IMGNAME := senao-ecb600 endef TARGET_DEVICES += engenius_ecb600 @@ -1067,8 +1067,8 @@ define Device/engenius_ens202ext-v1 DEVICE_MODEL := ENS202EXT DEVICE_VARIANT := v1 DEVICE_PACKAGES := rssileds - IMAGE_SIZE := 12032k - LOADER_FLASH_OFFS := 0x230000 + IMAGE_SIZE := 12096k + LOADER_FLASH_OFFS := 0x220000 SENAO_IMGNAME := senao-ens202ext endef TARGET_DEVICES += engenius_ens202ext-v1 @@ -1080,8 +1080,8 @@ define Device/engenius_enstationac-v1 DEVICE_MODEL := EnStationAC DEVICE_VARIANT := v1 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct rssileds - IMAGE_SIZE := 11520k - LOADER_FLASH_OFFS := 0x230000 + IMAGE_SIZE := 11584k + LOADER_FLASH_OFFS := 0x220000 SENAO_IMGNAME := ar71xx-generic-enstationac endef TARGET_DEVICES += engenius_enstationac-v1 diff --git a/target/linux/ath79/image/tiny.mk b/target/linux/ath79/image/tiny.mk index dec3cd368db4..e9aab2ce069b 100644 --- a/target/linux/ath79/image/tiny.mk +++ b/target/linux/ath79/image/tiny.mk @@ -37,8 +37,8 @@ define Device/engenius_eap350-v1 DEVICE_VENDOR := EnGenius DEVICE_MODEL := EAP350 DEVICE_VARIANT := v1 - IMAGE_SIZE := 4864k - LOADER_FLASH_OFFS := 0x1b0000 + IMAGE_SIZE := 4928k + LOADER_FLASH_OFFS := 0x1a0000 SENAO_IMGNAME := senao-eap350 endef TARGET_DEVICES += engenius_eap350-v1 @@ -49,8 +49,8 @@ define Device/engenius_ecb350-v1 DEVICE_VENDOR := EnGenius DEVICE_MODEL := ECB350 DEVICE_VARIANT := v1 - IMAGE_SIZE := 4864k - LOADER_FLASH_OFFS := 0x1b0000 + IMAGE_SIZE := 4928k + LOADER_FLASH_OFFS := 0x1a0000 SENAO_IMGNAME := senao-ecb350 endef TARGET_DEVICES += engenius_ecb350-v1 @@ -62,8 +62,8 @@ define Device/engenius_enh202-v1 DEVICE_MODEL := ENH202 DEVICE_VARIANT := v1 DEVICE_PACKAGES := rssileds - IMAGE_SIZE := 4864k - LOADER_FLASH_OFFS := 0x1b0000 + IMAGE_SIZE := 4928k + LOADER_FLASH_OFFS := 0x1a0000 SENAO_IMGNAME := senao-enh202 endef TARGET_DEVICES += engenius_enh202-v1