From: Gabor Juhos Date: Fri, 23 Nov 2012 20:55:26 +0000 (+0000) Subject: generic: ar8216: set delay values for SGMII mode on AR8327 X-Git-Tag: reboot~12201 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=49d4b5581d9e4d4bc9cd8fde679b29488d5827bb;p=openwrt%2Fstaging%2Fjogo.git generic: ar8216: set delay values for SGMII mode on AR8327 Signed-off-by: Gabor Juhos SVN-Revision: 34315 --- diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index 8f3aded48f..9cbe3a838c 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -903,6 +903,20 @@ ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg) case AR8327_PAD_MAC_SGMII: t = AR8327_PAD_SGMII_EN; + + /* + * WAR for the QUalcomm Atheros AP136 board. + * It seems that RGMII TX/RX delay settings needs to be + * applied for SGMII mode as well, The ethernet is not + * reliable without this. + */ + t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S; + t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S; + if (cfg->rxclk_delay_en) + t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN; + if (cfg->txclk_delay_en) + t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN; + break; case AR8327_PAD_MAC2PHY_MII: