From: Andrey Borzenkov Date: Sat, 17 Jan 2009 12:53:45 +0000 (+0300) Subject: Move orinoco Kconfig entries into drivers/net/wireless/orinoco/Kconfig X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=49c1d2085b92a392189d44a06840cbd9ec147da2;p=openwrt%2Fstaging%2Fblogic.git Move orinoco Kconfig entries into drivers/net/wireless/orinoco/Kconfig Since driver now lives in separate subdirectory, move Kconfig entries in own file so they can be tweaked indepndently. It complements "orinoco: Move sources to a subdirectory". Signed-off-by: Andrey Borzenkov Acked-by: Pavel Roskin Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 2dddbd012a99..fe819a785714 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -194,127 +194,6 @@ config AIRO The driver can be compiled as a module and will be named "airo". -config HERMES - tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" - depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 - select WIRELESS_EXT - select FW_LOADER - select CRYPTO - select CRYPTO_MICHAEL_MIC - ---help--- - A driver for 802.11b wireless cards based on the "Hermes" or - Intersil HFA384x (Prism 2) MAC controller. This includes the vast - majority of the PCMCIA 802.11b cards (which are nearly all rebadges) - - except for the Cisco/Aironet cards. Cards supported include the - Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, - Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, - IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear - MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel - IPW2011, and Symbol Spectrum24 High Rate amongst others. - - This option includes the guts of the driver, but in order to - actually use a card you will also need to enable support for PCMCIA - Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. - - You will also very likely also need the Wireless Tools in order to - configure your card and that /etc/pcmcia/wireless.opts works : - - -config HERMES_CACHE_FW_ON_INIT - bool "Cache Hermes firmware on driver initialisation" - depends on HERMES - default y - ---help--- - Say Y to cache any firmware required by the Hermes drivers - on startup. The firmware will remain cached until the - driver is unloaded. The cache uses 64K of RAM. - - Otherwise load the firmware from userspace as required. In - this case the driver should be unloaded and restarted - whenever the firmware is changed. - - If you are not sure, say Y. - -config APPLE_AIRPORT - tristate "Apple Airport support (built-in)" - depends on PPC_PMAC && HERMES - help - Say Y here to support the Airport 802.11b wireless Ethernet hardware - built into the Macintosh iBook and other recent PowerPC-based - Macintosh machines. This is essentially a Lucent Orinoco card with - a non-standard interface. - - This driver does not support the Airport Extreme (802.11b/g). Use - the BCM43xx driver for Airport Extreme cards. - -config PLX_HERMES - tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in PLX9052 based PCI adaptors. These - adaptors are not a full PCMCIA controller but act as a more limited - PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that - 802.11b PCMCIA cards can be used in desktop machines. The Netgear - MA301 is such an adaptor. - -config TMD_HERMES - tristate "Hermes in TMD7160 based PCI adaptor support" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in TMD7160 based PCI adaptors. These - adaptors are not a full PCMCIA controller but act as a more limited - PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that - 802.11b PCMCIA cards can be used in desktop machines. - -config NORTEL_HERMES - tristate "Nortel emobility PCI adaptor support" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in Nortel emobility PCI adaptors. These - adaptors are not full PCMCIA controllers, but act as a more limited - PCI <-> PCMCIA bridge. - -config PCI_HERMES - tristate "Prism 2.5 PCI 802.11b adaptor support" - depends on PCI && HERMES - help - Enable support for PCI and mini-PCI 802.11b wireless NICs based on - the Prism 2.5 chipset. These are true PCI cards, not the 802.11b - PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also - common. Some of the built-in wireless adaptors in laptops are of - this variety. - -config PCMCIA_HERMES - tristate "Hermes PCMCIA card support" - depends on PCMCIA && HERMES - ---help--- - A driver for "Hermes" chipset based PCMCIA wireless adaptors, such - as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ - EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and - others). It should also be usable on various Prism II based cards - such as the Linksys, D-Link and Farallon Skyline. It should also - work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. - - You will very likely need the Wireless Tools in order to - configure your card and that /etc/pcmcia/wireless.opts works: - . - -config PCMCIA_SPECTRUM - tristate "Symbol Spectrum24 Trilogy PCMCIA card support" - depends on PCMCIA && HERMES - ---help--- - - This is a driver for 802.11b cards using RAM-loadable Symbol - firmware, such as Symbol Wireless Networker LA4100, CompactFlash - cards by Socket Communications and Intel PRO/Wireless 2011B. - - This driver requires firmware download on startup. Utilities - for downloading Symbol firmware are available at - - config ATMEL tristate "Atmel at76c50x chipset 802.11b support" depends on (PCI || PCMCIA) && WLAN_80211 @@ -596,5 +475,6 @@ source "drivers/net/wireless/b43/Kconfig" source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" source "drivers/net/wireless/rt2x00/Kconfig" +source "drivers/net/wireless/orinoco/Kconfig" endmenu diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig new file mode 100644 index 000000000000..44411eb4e91b --- /dev/null +++ b/drivers/net/wireless/orinoco/Kconfig @@ -0,0 +1,120 @@ +config HERMES + tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" + depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 + select WIRELESS_EXT + select FW_LOADER + select CRYPTO + select CRYPTO_MICHAEL_MIC + ---help--- + A driver for 802.11b wireless cards based on the "Hermes" or + Intersil HFA384x (Prism 2) MAC controller. This includes the vast + majority of the PCMCIA 802.11b cards (which are nearly all rebadges) + - except for the Cisco/Aironet cards. Cards supported include the + Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, + Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, + IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear + MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel + IPW2011, and Symbol Spectrum24 High Rate amongst others. + + This option includes the guts of the driver, but in order to + actually use a card you will also need to enable support for PCMCIA + Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. + + You will also very likely also need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works : + + +config HERMES_CACHE_FW_ON_INIT + bool "Cache Hermes firmware on driver initialisation" + depends on HERMES + default y + ---help--- + Say Y to cache any firmware required by the Hermes drivers + on startup. The firmware will remain cached until the + driver is unloaded. The cache uses 64K of RAM. + + Otherwise load the firmware from userspace as required. In + this case the driver should be unloaded and restarted + whenever the firmware is changed. + + If you are not sure, say Y. + +config APPLE_AIRPORT + tristate "Apple Airport support (built-in)" + depends on PPC_PMAC && HERMES + help + Say Y here to support the Airport 802.11b wireless Ethernet hardware + built into the Macintosh iBook and other recent PowerPC-based + Macintosh machines. This is essentially a Lucent Orinoco card with + a non-standard interface. + + This driver does not support the Airport Extreme (802.11b/g). Use + the BCM43xx driver for Airport Extreme cards. + +config PLX_HERMES + tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in PLX9052 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. The Netgear + MA301 is such an adaptor. + +config TMD_HERMES + tristate "Hermes in TMD7160 based PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in TMD7160 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. + +config NORTEL_HERMES + tristate "Nortel emobility PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in Nortel emobility PCI adaptors. These + adaptors are not full PCMCIA controllers, but act as a more limited + PCI <-> PCMCIA bridge. + +config PCI_HERMES + tristate "Prism 2.5 PCI 802.11b adaptor support" + depends on PCI && HERMES + help + Enable support for PCI and mini-PCI 802.11b wireless NICs based on + the Prism 2.5 chipset. These are true PCI cards, not the 802.11b + PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also + common. Some of the built-in wireless adaptors in laptops are of + this variety. + +config PCMCIA_HERMES + tristate "Hermes PCMCIA card support" + depends on PCMCIA && HERMES + ---help--- + A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and + others). It should also be usable on various Prism II based cards + such as the Linksys, D-Link and Farallon Skyline. It should also + work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. + + You will very likely need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works: + . + +config PCMCIA_SPECTRUM + tristate "Symbol Spectrum24 Trilogy PCMCIA card support" + depends on PCMCIA && HERMES + ---help--- + + This is a driver for 802.11b cards using RAM-loadable Symbol + firmware, such as Symbol Wireless Networker LA4100, CompactFlash + cards by Socket Communications and Intel PRO/Wireless 2011B. + + This driver requires firmware download on startup. Utilities + for downloading Symbol firmware are available at +