From: Matt Carlson Date: Tue, 25 Jan 2011 15:58:52 +0000 (+0000) Subject: tg3: Fix loopback tests X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=49692ca1e686970bac5726c3fd925427bb3ae89d;p=openwrt%2Fstaging%2Fblogic.git tg3: Fix loopback tests The half-duplex bit in the MAC MODE register will be set during the loopback test if the external link is in half-duplex mode. This will cause the loopback test to fail on newer devices. This patch turns the half-duplex bit off for the test. Also, newer devices fail the internal phy loopback test because the phy link takes a little while to come up. This patch adds code to wait for the link before proceeding with the test. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 370c67a9d08a..9c5690366f37 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -10845,8 +10845,9 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) return 0; - mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | - MAC_MODE_PORT_INT_LPBACK; + mac_mode = tp->mac_mode & + ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX); + mac_mode |= MAC_MODE_PORT_INT_LPBACK; if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) mac_mode |= MAC_MODE_LINK_POLARITY; if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY) @@ -10868,7 +10869,8 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) tg3_writephy(tp, MII_BMCR, val); udelay(40); - mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK; + mac_mode = tp->mac_mode & + ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX); if (tp->phy_flags & TG3_PHYFLG_IS_FET) { tg3_writephy(tp, MII_TG3_FET_PTEST, MII_TG3_FET_PTEST_FRC_TX_LINK | @@ -10896,6 +10898,13 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) MII_TG3_EXT_CTRL_LNK3_LED_MODE); } tw32(MAC_MODE, mac_mode); + + /* Wait for link */ + for (i = 0; i < 100; i++) { + if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP) + break; + mdelay(1); + } } else { return -EINVAL; }