From: Xu Jiucheng Date: Tue, 17 Jan 2012 08:01:29 +0000 (+0800) Subject: powerpc/85xx: Added dts for P1021RDB-PC board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=490bdb77b64376ead1ba0f4b011f5abea360bbc5;p=openwrt%2Fstaging%2Fblogic.git powerpc/85xx: Added dts for P1021RDB-PC board P1021RDB-PC Overview ----------------- 1Gbyte DDR3 (on board DDR) 16Mbyte NOR flash 32Mbyte eSLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory Real-time clock on I2C bus SD/MMC connector to interface with the SD memory card PCIex - x1 PCIe slot or x1 PCIe to dual SATA controller - x1 mini-PCIe slot USB 2.0 - ULPI PHY interface: SMSC USB3300 USB PHY and Genesys Logic’s GL850A - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot eTSEC1: Connected to RGMII PHY VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Matthew McClintock Signed-off-by: Xu Jiucheng Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi index 38ba54d1e32e..b7929c99f8e6 100644 --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -144,6 +144,10 @@ /include/ "pq3-usb2-dr-0.dtsi" /include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sdhci,auto-cmd12; + }; + /include/ "pq3-sec3.3-0.dtsi" /include/ "pq3-mpic.dtsi" diff --git a/arch/powerpc/boot/dts/p1021rdb.dts b/arch/powerpc/boot/dts/p1021rdb.dts new file mode 100644 index 000000000000..90b6b4caa273 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021rdb.dtsi b/arch/powerpc/boot/dts/p1021rdb.dtsi new file mode 100644 index 000000000000..b973461ab751 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb.dtsi @@ -0,0 +1,236 @@ +/* + * P1021 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for User Writable Area */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi2>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1021rdb_36b.dts b/arch/powerpc/boot/dts/p1021rdb_36b.dts new file mode 100644 index 000000000000..ea6d8b5fa10b --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb_36b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + ranges = <0x0 0xf 0xffe80000 0x40000>; + reg = <0xf 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi"