From: Peter Tyser Date: Fri, 23 Oct 2009 20:55:48 +0000 (-0500) Subject: xpedite5370: Enable multi-core support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=48618126f78f05042dae428811809b594f747eb9;p=project%2Fbcm63xx%2Fu-boot.git xpedite5370: Enable multi-core support Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- diff --git a/board/xes/xpedite5370/tlb.c b/board/xes/xpedite5370/tlb.c index caafa3011b..a465ce3860 100644 --- a/board/xes/xpedite5370/tlb.c +++ b/board/xes/xpedite5370/tlb.c @@ -61,32 +61,37 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1M, 1), + /* **M** - Boot page for secondary processors */ + SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, CONFIG_BPTR_VIRT_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, + 0, 3, BOOKE_PAGESZ_4K, 1), + #ifdef CONFIG_PCIE1 /* *I*G* - PCIe */ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), + 0, 4, BOOKE_PAGESZ_1G, 1), #endif #ifdef CONFIG_PCIE2 /* *I*G* - PCIe */ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), + 0, 5, BOOKE_PAGESZ_256M, 1), #endif #ifdef CONFIG_PCIE3 /* *I*G* - PCIe */ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), + 0, 6, BOOKE_PAGESZ_256M, 1), #endif #if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) /* *I*G* - PCIe */ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_64M, 1), + 0, 7, BOOKE_PAGESZ_64M, 1), #endif }; diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 26b798b4d8..7782df3678 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -48,6 +48,13 @@ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +/* + * Multicore config + */ +#define CONFIG_MP +#define CONFIG_BPTR_VIRT_ADDR 0xee000000 /* virt boot page address */ +#define CONFIG_MPC8xxx_DISABLE_BPTR /* Don't leave BPTR enabled */ + /* * DDR config */ @@ -109,6 +116,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable * 0xe880_0000 0xe8ff_ffff PCIe2 IO 8M non-cacheable + * 0xee00_0000 0xee00_ffff Boot page translation 4K non-cacheable * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable