From: Ivan Vecera Date: Thu, 28 May 2015 21:10:08 +0000 (+0200) Subject: bna: fix soft lock-up during firmware initialization failure X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4818e856475b309667ee38d4d0f2e3c1b933feef;p=openwrt%2Fstaging%2Fblogic.git bna: fix soft lock-up during firmware initialization failure Bug in the driver initialization causes soft-lockup if firmware initialization timeout is reached. Polling function bfa_ioc_poll_fwinit() incorrectly calls bfa_nw_iocpf_timeout() when the timeout is reached. The problem is that bfa_nw_iocpf_timeout() calls again bfa_ioc_poll_fwinit()... etc. The bfa_ioc_poll_fwinit() should directly send timeout event for iocpf and the same should be done if firmware download into HW fails. Cc: Rasesh Mody Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c index 594a2ab36d31..68f3c13c9ef6 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -2414,7 +2414,7 @@ bfa_ioc_boot(struct bfa_ioc *ioc, enum bfi_fwboot_type boot_type, if (status == BFA_STATUS_OK) bfa_ioc_lpu_start(ioc); else - bfa_nw_iocpf_timeout(ioc); + bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT); return status; } @@ -3029,7 +3029,7 @@ bfa_ioc_poll_fwinit(struct bfa_ioc *ioc) } if (ioc->iocpf.poll_time >= BFA_IOC_TOV) { - bfa_nw_iocpf_timeout(ioc); + bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT); } else { ioc->iocpf.poll_time += BFA_IOC_POLL_TOV; mod_timer(&ioc->iocpf_timer, jiffies +