From: John Crispin Date: Tue, 21 May 2024 09:35:05 +0000 (+0200) Subject: Revert "mediatek/filogic: add OpenWrt One support" X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=47d308a46cdbca6c8634a6f26fdf8e75579df26b;p=openwrt%2Fstaging%2Fnbd.git Revert "mediatek/filogic: add OpenWrt One support" This reverts commit 797904b3cb4a5c575641c19e7f3989926e4c7902. There is a stray line in the commit description Signed-off-by: John Crispin --- diff --git a/target/linux/mediatek/dts/mt7981b-openwrt-one.dts b/target/linux/mediatek/dts/mt7981b-openwrt-one.dts deleted file mode 100644 index b2223f8d76..0000000000 --- a/target/linux/mediatek/dts/mt7981b-openwrt-one.dts +++ /dev/null @@ -1,457 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) - -/dts-v1/; -#include "mt7981.dtsi" - -/ { - model = "OpenWrt One"; - compatible = "openwrt,one", "mediatek,mt7981"; - - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; - serial0 = &uart0; - led-boot = &led_status_white; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_green; - }; - - chosen { - stdout-path = "serial0:115200n8"; - rootdisk = <&ubi_fit_volume>; - }; - - memory { - reg = <0 0x40000000 0 0x40000000>; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "fixed-5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - }; - - gpio-keys { - compatible = "gpio-keys"; - - user { - label = "user"; - linux,code = ; - gpios = <&pio 0 GPIO_ACTIVE_HIGH>; - }; - - reset { - label = "reset"; - linux,code = ; - gpios = <&pio 1 GPIO_ACTIVE_LOW>; - }; - }; - - pwm-leds { - compatible = "pwm-leds"; - - led_status_white: led-0 { - color = ; - function = LED_FUNCTION_STATUS; - pwms = <&pwm 0 10000>; - linux,default-trigger = "pattern"; - led-pattern = <0 500 25 500>; - }; - - led_status_green: led-1 { - color = ; - function = LED_FUNCTION_STATUS; - pwms = <&pwm 1 10000>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - led_status_red: led-0 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&pio 9 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - function = LED_FUNCTION_LAN; - color = ; - gpios = <&pio 34 GPIO_ACTIVE_LOW>; - }; - - led-2 { - function = LED_FUNCTION_LAN; - color = ; - gpios = <&pio 35 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-export { - compatible = "gpio-export"; - - gpio-0 { - gpio-export,name = "mikrobus-reset"; - gpio-export,output = <1>; - gpios = <&pio 2 GPIO_ACTIVE_HIGH>; - }; - - gpio-1 { - gpio-export,name = "watchdog-enable"; - gpio-export,output = <1>; - gpios = <&pio 11 GPIO_ACTIVE_HIGH>; - }; - - gpio-2 { - gpio-export,name = "usb-enable"; - gpio-export,output = <1>; - gpios = <&pio 14 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&pio 8 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - hw_margin_ms = <25000>; - always-running; - }; -}; - -ð { - status = "okay"; - - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-handle = <&phy15>; - phy-mode = "2500base-x"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_factory_4>; - }; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-mode = "gmii"; - phy-handle = <&int_gbe_phy>; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_factory_a>; - }; -}; - -&mdio_bus { - phy15: phy@f { - reg = <0xf>; - - airoha,pnswap-rx; - - interrupt-parent = <&pio>; - interrupts = <38 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <20000>; - - phy-mode = "2500base-x"; - full-duplex; - pause; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - function = LED_FUNCTION_WAN; - color = ; - }; - - led@1 { - reg = <1>; - function = LED_FUNCTION_WAN; - color = ; - }; - }; - }; -}; - -&crypto { - status = "okay"; -}; - -&pio { - spi0_flash_pins: spi0-pins { - mux { - function = "spi"; - groups = "spi0", "spi0_wp_hold"; - }; - - conf-pu { - pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; - drive-strength = ; - bias-pull-up = ; - }; - - conf-pd { - pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; - drive-strength = ; - bias-pull-down = ; - }; - }; - - spi1_flash_pins: spi1-pins { - mux { - function = "spi"; - groups = "spi1_1"; - }; - - conf-pu { - pins = "SPI1_CS"; - drive-strength = ; - bias-pull-up = ; - }; - - conf-pd { - pins = "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; - drive-strength = ; - bias-pull-down = ; - }; - }; - - spi2_flash_pins: spi2-pins { - mux { - function = "spi"; - groups = "spi2"; - }; - - conf-pu { - pins = "SPI2_CS", "SPI2_WP"; - drive-strength = ; - bias-pull-up = ; - }; - - conf-pd { - pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; - drive-strength = ; - bias-pull-down = ; - }; - }; - - i2c_pins: i2c-pins { - mux { - function = "i2c"; - groups = "i2c0_0"; - }; - }; - - uart2_pins: uart2-pins { - mux { - function = "uart"; - groups = "uart2_0_tx_rx"; - }; - }; - - pwm_pins: pwm-pins { - mux { - function = "pwm"; - groups = "pwm0_0", "pwm1_1"; - }; - }; - - pcie_pins: pcie-pins { - mux { - function = "pcie"; - groups = "pcie_pereset"; - }; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pins>; - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c_pins>; - status = "okay"; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_flash_pins>; - cs-gpios = <0>, <0>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <52000000>; - - spi-cal-enable; - spi-cal-mode = "read-data"; - spi-cal-datalen = <7>; - spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; - spi-cal-addrlen = <5>; - spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bl2"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@580000 { - label = "ubi"; - reg = <0x100000 0x7F00000>; - compatible = "linux,ubi"; - - volumes { - ubi_fit_volume: ubi-volume-fit { - volname = "fit"; - }; - }; - }; - }; - }; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_flash_pins>; - status = "okay"; -}; - -&spi2 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_flash_pins>; - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - - spi-max-frequency = <52000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bl2-nor"; - reg = <0x00000 0x40000>; - }; - - partition@40000 { - label = "factory"; - reg = <0x40000 0xc0000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - eeprom_factory_0: eeprom@0 { - reg = <0x0 0x1000>; - }; - - macaddr_factory_4: macaddr@4 { - compatible = "mac-base"; - reg = <0x24 0x6>; - #nvmem-cell-cells = <1>; - }; - - macaddr_factory_a: macaddr@a { - compatible = "mac-base"; - reg = <0x2a 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@100000 { - label = "fip-nor"; - reg = <0x100000 0x80000>; - }; - - partition@180000 { - label = "recovery"; - reg = <0x180000 0xc80000>; - }; - }; - }; -}; - -&xhci { - phys = <&u2port0 PHY_TYPE_USB2>; - vusb33-supply = <®_3p3v>; - vbus-supply = <®_5v>; - mediatek,u3p-dis-msk = <0x01>; - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&wifi { - nvmem-cells = <&eeprom_factory_0>; - nvmem-cell-names = "eeprom"; - status = "okay"; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pins>; - status = "okay"; -}; - -&sgmiisys0 { - /delete-node/ mediatek,pnswap; -}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index ec239cb0cf..b5a2554671 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -59,12 +59,6 @@ openembed,som7981) ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx" ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link" ;; -openwrt,one) - ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx" - ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:0f:amber:wan" "eth0" "link" - ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx" - ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link" - ;; routerich,ax3000) ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index fc4bc07b2f..4de3cf044d 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -59,8 +59,7 @@ mediatek_setup_interfaces() glinet,gl-mt3000|\ glinet,gl-x3000|\ glinet,gl-xe3000|\ - openembed,som7981|\ - openwrt,one) + openembed,som7981) ucidef_set_interfaces_lan_wan eth1 eth0 ;; dlink,aquila-pro-ai-m30-a1) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata index 27a16e0fb7..bd68ef7415 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata @@ -31,9 +31,6 @@ case "$FIRMWARE" in ;; esac ;; - openwrt,one) - caldata_extract "factory" 0x0 0x1000 - ;; ubnt,unifi-6-plus) caldata_extract_mmc "factory" 0x0 0x1000 ;; diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 9b46111d33..e7b347dc5f 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -86,7 +86,6 @@ platform_do_upgrade() { bananapi,bpi-r4-poe|\ mediatek,mt7988a-rfb|\ jdcloud,re-cp-03|\ - openwrt,one|\ tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index e85d67f2ae..5c2f67eb99 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -951,54 +951,6 @@ define Device/openembed_som7981 endef TARGET_DEVICES += openembed_som7981 -define Build/append-openwrt-one-eeprom - dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@ -endef - -define Device/openwrt_one - DEVICE_VENDOR := OpenWrt - DEVICE_MODEL := One - DEVICE_DTS := mt7981b-openwrt-one - DEVICE_DTS_DIR := ../dts - DEVICE_DTC_FLAGS := --pad 4096 - DEVICE_DTS_LOADADDR := 0x43f00000 - DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-rtc-pcf8563 kmod-usb3 kmod-nvme kmod-phy-airoha-en8811h - KERNEL_LOADADDR := 0x44000000 - KERNEL := kernel-bin | gzip - KERNEL_INITRAMFS := kernel-bin | lzma | \ - fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k - KERNEL_INITRAMFS_SUFFIX := .itb - KERNEL_IN_UBI := 1 - UBOOTENV_IN_UBI := 1 - IMAGES := sysupgrade.itb - IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m - IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata - ARTIFACTS := \ - nor-preloader.bin nor-bl31-uboot.fip \ - snand-preloader.bin snand-bl31-uboot.fip \ - factory.ubi snand-factory.bin nor-factory.bin - ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr4 - ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-nor - ARTIFACT/snand-preloader.bin := mt7981-bl2 spim-nand-ubi-ddr4 - ARTIFACT/snand-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-snand - ARTIFACT/factory.ubi := ubinize-image fit squashfs-sysupgrade.itb - ARTIFACT/snand-factory.bin := mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \ - mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \ - mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \ - mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 1024k | \ - ubinize-image fit squashfs-sysupgrade.itb - ARTIFACT/nor-factory.bin := mt7981-bl2 nor-ddr4 | pad-to 256k | \ - append-openwrt-one-eeprom | pad-to 1024k | \ - mt7981-bl31-uboot openwrt_one-nor | pad-to 512k | \ - append-image-stage initramfs.itb - UBINIZE_OPTS := -E 5 - BLOCKSIZE := 128k - PAGESIZE := 2048 - UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7981_openwrt_one-snand-u-boot.fip recovery=:$(KDIR)/tmp/openwrt-mediatek-filogic-openwrt_one-initramfs.itb \ - $(if $(wildcard $(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb), calibration=:$(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb) -endef -TARGET_DEVICES += openwrt_one - define Device/qihoo_360t7 DEVICE_VENDOR := Qihoo DEVICE_MODEL := 360T7