From: Gareth Williams Date: Wed, 18 Sep 2019 08:04:34 +0000 (+0100) Subject: dt-bindings: snps,dw-apb-ssi: Add optional clock domain information X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=47cf13bc763c891c6192184c5e5aa8c1b331b2ff;p=openwrt%2Fstaging%2Fblogic.git dt-bindings: snps,dw-apb-ssi: Add optional clock domain information Note in the bindings documentation that pclk should be renamed if a clock domain is used to enable the optional bus clock. Signed-off-by: Gareth Williams Link: https://lore.kernel.org/r/1568793876-9009-3-git-send-email-gareth.williams.jx@renesas.com Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index f54c8c36395e..3ed08ee9feba 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -16,7 +16,8 @@ Required properties: Optional properties: - clock-names : Contains the names of the clocks: "ssi_clk", for the core clock used to generate the external SPI clock. - "pclk", the interface clock, required for register access. + "pclk", the interface clock, required for register access. If a clock domain + used to enable this clock then it should be named "pclk_clkdomain". - cs-gpios : Specifies the gpio pins to be used for chipselects. - num-cs : The number of chipselects. If omitted, this will default to 4. - reg-io-width : The I/O register width (in bytes) implemented by this