From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed, 27 Jul 2016 19:27:54 +0000 (+0200)
Subject: lantiq: fix switch configuration for EASY80920
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=47cce1d5e45c1e6c5bb5659698408d4cea4e03a4;p=openwrt%2Fstaging%2Fzorun.git

lantiq: fix switch configuration for EASY80920

The device tree description misses some Ethernet ports and there was no
model specified for this board. In addition there was no switch
specific default configuration created.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index d6f66016f6..989dbf32a6 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -157,6 +157,13 @@ WBMR300)
 		"2:lan:2" "3:lan:3" "5:lan:4" "4:wan:1" "6t@eth0"
 	;;
 
+EASY80920NAND|EASY80920NOR)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:3" "5:wan:1" "6t@eth0"
+	;;
+
 *)
 	ucidef_set_interface_lan 'eth0'
 	;;
diff --git a/target/linux/lantiq/dts/EASY80920.dtsi b/target/linux/lantiq/dts/EASY80920.dtsi
index 4e649976a2..47b7a07f2c 100644
--- a/target/linux/lantiq/dts/EASY80920.dtsi
+++ b/target/linux/lantiq/dts/EASY80920.dtsi
@@ -266,13 +266,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0>;
-		mac-address = [ 00 11 22 33 44 55 ];
+		lantiq,switch;
 
-		ethernet@0 {
+		ethernet@4 {
 			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
+			reg = <4>;
+			phynmode0 = "gmii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
 		};
 		ethernet@1 {
 			compatible = "lantiq,xrx200-pdi-port";
@@ -280,11 +286,11 @@
 			phy-mode = "rgmii";
 			phy-handle = <&phy1>;
 		};
-		ethernet@2 {
+		ethernet@0 {
 			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
 		};
 	};
 
@@ -293,8 +299,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <1>;
-		mac-address = [ 00 11 22 33 44 56 ];
 		lantiq,wan;
+
 		ethernet@5 {
 			compatible = "lantiq,xrx200-pdi-port";
 			reg = <5>;
@@ -303,20 +309,6 @@
 		};
 	};
 
-	test: interface@2 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <2>;
-		mac-address = [ 00 11 22 33 44 57 ];
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phynmode0 = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
 	mdio@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/target/linux/lantiq/dts/EASY80920NAND.dts b/target/linux/lantiq/dts/EASY80920NAND.dts
index 7e1811edc1..96d5f64de0 100644
--- a/target/linux/lantiq/dts/EASY80920NAND.dts
+++ b/target/linux/lantiq/dts/EASY80920NAND.dts
@@ -4,6 +4,8 @@
 /include/ "EASY80920.dtsi"
 
 / {
+	model = "EASY80920NAND - Intel EASY80920 Nand";
+
 	chosen {
 		bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
 	};
diff --git a/target/linux/lantiq/dts/EASY80920NOR.dts b/target/linux/lantiq/dts/EASY80920NOR.dts
index 54d2fa9617..39367f7bb2 100644
--- a/target/linux/lantiq/dts/EASY80920NOR.dts
+++ b/target/linux/lantiq/dts/EASY80920NOR.dts
@@ -4,6 +4,8 @@
 /include/ "EASY80920.dtsi"
 
 / {
+	model = "EASY80920NOR - Intel EASY80920 Nor";
+
 	fpi@10000000 {
 		localbus@0 {
 			ranges = <0 0 0x0 0x3ffffff>;