From: Alan Stern Date: Wed, 19 Oct 2005 16:52:02 +0000 (-0400) Subject: [PATCH] USB: Always do usb-handoff X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=478a3bab8c87a9ba4a4ba338314e32bb0c378e62;p=openwrt%2Fstaging%2Fblogic.git [PATCH] USB: Always do usb-handoff This revised patch (as586b) makes usb-handoff permanently true and no longer a kernel boot parameter. It also removes the piix3_usb quirk code; that was nothing more than an early version of the USB handoff code (written at a time when Intel's PIIX3 was about the only motherboard with USB support). And it adds identifiers for the three PCI USB controller classes to pci_ids.h. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 971589a9752d..90766b75d1b7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1517,8 +1517,6 @@ running once the system is up. uart6850= [HW,OSS] Format: , - usb-handoff [HW] Enable early USB BIOS -> OS handoff - usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index f7411ca48835..b7fd3f644e1e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -23,33 +23,6 @@ #include -/* - * PIIX3 USB: We have to disable USB interrupts that are - * hardwired to PIRQD# and may be shared with an - * external device. - * - * Legacy Support Register (LEGSUP): - * bit13: USB PIRQ Enable (USBPIRQDEN), - * bit4: Trap/SMI On IRQ Enable (USBSMIEN). - * - * We mask out all r/wc bits, too. - */ -static void __devinit quirk_piix3_usb(struct pci_dev *dev) -{ - u16 legsup; - - pci_read_config_word(dev, 0xc0, &legsup); - legsup &= 0x50ef; - pci_write_config_word(dev, 0xc0, legsup); -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb ); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb ); - - -/* FIXME these should be the guts of hcd->reset() methods; resolve all - * the differences between this version and the HCD's version. - */ - #define UHCI_USBLEGSUP 0xc0 /* legacy support */ #define UHCI_USBCMD 0 /* command register */ #define UHCI_USBINTR 4 /* interrupt register */ @@ -83,13 +56,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, qui #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ -int usb_early_handoff __devinitdata = 0; -static int __init usb_handoff_early(char *str) -{ - usb_early_handoff = 1; - return 0; -} -__setup("usb-handoff", usb_handoff_early); /* * Make sure the controller is completely inactive, unable to @@ -320,17 +286,11 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) { - if (!usb_early_handoff) - return; - - if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */ + if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) quirk_usb_handoff_uhci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */ + else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI) quirk_usb_handoff_ohci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */ + else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI) quirk_usb_disable_ehci(pdev); - } - - return; } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); diff --git a/include/asm-i386/mach-summit/mach_mpparse.h b/include/asm-i386/mach-summit/mach_mpparse.h index 2b9e6d55bef1..1cce2b924a80 100644 --- a/include/asm-i386/mach-summit/mach_mpparse.h +++ b/include/asm-i386/mach-summit/mach_mpparse.h @@ -22,7 +22,6 @@ static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, { } -extern int usb_early_handoff; static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid) { @@ -32,7 +31,6 @@ static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, || !strncmp(productid, "RUTHLESS SMP", 12))){ use_cyclone = 1; /*enable cyclone-timer*/ setup_summit(); - usb_early_handoff = 1; return 1; } return 0; @@ -46,7 +44,6 @@ static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) || !strncmp(oem_table_id, "EXA", 3))){ use_cyclone = 1; /*enable cyclone-timer*/ setup_summit(); - usb_early_handoff = 1; return 1; } return 0; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 7d300f7469e3..467a096c3b81 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -96,6 +96,9 @@ #define PCI_CLASS_SERIAL_ACCESS 0x0c01 #define PCI_CLASS_SERIAL_SSA 0x0c02 #define PCI_CLASS_SERIAL_USB 0x0c03 +#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300 +#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310 +#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320 #define PCI_CLASS_SERIAL_FIBER 0x0c04 #define PCI_CLASS_SERIAL_SMBUS 0x0c05