From: Rosen Penev <rosenp@gmail.com>
Date: Sun, 16 Jun 2024 19:48:40 +0000 (-0700)
Subject: ath79: gl-e750: use nvmem for mac addresses
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=477c8a5101f0a6215201d66be25cf11e9803fe2b;p=openwrt%2Fstaging%2Fnbd.git

ath79: gl-e750: use nvmem for mac addresses

This is a simple conversion to dts.

68ac3f2cddab states that the 5ghz wifi address is calculated from ART 0
+ 2.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17066
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---

diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-e750.dts b/target/linux/ath79/dts/qca9531_glinet_gl-e750.dts
index ba12915570..e4b5f1ea6c 100644
--- a/target/linux/ath79/dts/qca9531_glinet_gl-e750.dts
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-e750.dts
@@ -45,6 +45,13 @@
 
 &pcie0 {
 	status = "okay";
+
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&macaddr_art_0 2>;
+		nvmem-cell-names = "mac-address";
+	};
 };
 
 &usb0 {
@@ -90,7 +97,9 @@
 					#size-cells = <1>;
 
 					macaddr_art_0: macaddr@0 {
+						compatible = "mac-base";
 						reg = <0x0 0x6>;
+						#nvmem-cell-cells = <1>;
 					};
 
 					cal_art_1000: calibration@1000 {
@@ -134,7 +143,7 @@
 
 	phy-handle = <&swphy4>;
 
-	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cells = <&macaddr_art_0 0>;
 	nvmem-cell-names = "mac-address";
 };
 
diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac b/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac
index 5a933df501..989791b64f 100644
--- a/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac
+++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac
@@ -10,11 +10,6 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case $board in
-	glinet,gl-e750)
-		# Set mac address for 5g device
-		[ "$PHYNBR" -eq 0 ] && \
-			macaddr_add $(mtd_get_mac_binary art 0x0) 2 > /sys${DEVPATH}/macaddress
-		;;
 	zyxel,emg2926-q10a|\
 	zyxel,nbg6716)
 		ethaddr=$(mtd_get_mac_ascii u-boot-env ethaddr)