From: Lyude Date: Tue, 14 Jun 2016 15:04:09 +0000 (-0400) Subject: drm/i915/ilk: Don't disable SSC source if it's in use X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=476490a945e1f0f6bd58e303058d2d8ca93a974c;p=openwrt%2Fstaging%2Fblogic.git drm/i915/ilk: Don't disable SSC source if it's in use Thanks to Ville Syrjälä for pointing me towards the cause of this issue. Unfortunately one of the sideaffects of having the refclk for a DPLL set to SSC is that as long as it's set to SSC, the GPU will prevent us from powering down any of the pipes or transcoders using it. A couple of BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL configurations. This causes issues on the first modeset, since we don't expect SSC to be left on and as a result, can't successfully power down the pipes or the transcoders using it. Here's an example from this Dell OptiPlex 990: [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled [drm:intel_modeset_init] 2 display pipes available. [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_crt_reset] crt adpa set to 0xf40000 [drm:intel_dp_init_connector] Adding DP connector on port C [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 [drm:ironlake_init_pch_refclk] Disabling SSC entirely … later we try committing the first modeset … [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A [drm:intel_dump_pipe_config] cpu_transcoder: A … [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258 [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600 [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A [drm:intel_disable_pipe] disabling pipe A ------------[ cut here ]------------ WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915] pipe_off wait timed out … ---[ end trace 94fc8aa03ae139e8 ]--- [drm:intel_dp_link_down] [drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A Later modesets succeed since they reset the DPLL's configuration anyway, but this is enough to get stuck with a big fat warning in dmesg. A better solution would be to add refcounts for the SSC source, but for now leaving the source clock on should suffice. Changes since v4: - Fix calculation of final for systems with LVDS panels (fixes BUG() on CI test suite) Changes since v3: - Move temp variable into loop - Move checks for using_ssc_source to after we've figured out has_ck505 - Add using_ssc_source to debug output Changes since v2: - Fix debug output for when we disable the CPU source Changes since v1: - Leave the SSC source clock on instead of just shutting it off on all of the DPLL configurations. Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä Signed-off-by: Lyude Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 718f56525b96..56a1637c864f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8275,12 +8275,14 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; + int i; u32 val, final; bool has_lvds = false; bool has_cpu_edp = false; bool has_panel = false; bool has_ck505 = false; bool can_ssc = false; + bool using_ssc_source = false; /* We need to take the global config into account */ for_each_intel_encoder(dev, encoder) { @@ -8307,8 +8309,22 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) can_ssc = true; } - DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n", - has_panel, has_lvds, has_ck505); + /* Check if any DPLLs are using the SSC source */ + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + u32 temp = I915_READ(PCH_DPLL(i)); + + if (!(temp & DPLL_VCO_ENABLE)) + continue; + + if ((temp & PLL_REF_INPUT_MASK) == + PLLB_REF_INPUT_SPREADSPECTRUMIN) { + using_ssc_source = true; + break; + } + } + + DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n", + has_panel, has_lvds, has_ck505, using_ssc_source); /* Ironlake: try to setup display ref clock before DPLL * enabling. This is only under driver's control after @@ -8345,9 +8361,9 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; } else final |= DREF_CPU_SOURCE_OUTPUT_DISABLE; - } else { - final |= DREF_SSC_SOURCE_DISABLE; - final |= DREF_CPU_SOURCE_OUTPUT_DISABLE; + } else if (using_ssc_source) { + final |= DREF_SSC_SOURCE_ENABLE; + final |= DREF_SSC1_ENABLE; } if (final == val) @@ -8393,7 +8409,7 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) POSTING_READ(PCH_DREF_CONTROL); udelay(200); } else { - DRM_DEBUG_KMS("Disabling SSC entirely\n"); + DRM_DEBUG_KMS("Disabling CPU source output\n"); val &= ~DREF_CPU_SOURCE_OUTPUT_MASK; @@ -8404,16 +8420,20 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) POSTING_READ(PCH_DREF_CONTROL); udelay(200); - /* Turn off the SSC source */ - val &= ~DREF_SSC_SOURCE_MASK; - val |= DREF_SSC_SOURCE_DISABLE; + if (!using_ssc_source) { + DRM_DEBUG_KMS("Disabling SSC source\n"); - /* Turn off SSC1 */ - val &= ~DREF_SSC1_ENABLE; + /* Turn off the SSC source */ + val &= ~DREF_SSC_SOURCE_MASK; + val |= DREF_SSC_SOURCE_DISABLE; - I915_WRITE(PCH_DREF_CONTROL, val); - POSTING_READ(PCH_DREF_CONTROL); - udelay(200); + /* Turn off SSC1 */ + val &= ~DREF_SSC1_ENABLE; + + I915_WRITE(PCH_DREF_CONTROL, val); + POSTING_READ(PCH_DREF_CONTROL); + udelay(200); + } } BUG_ON(val != final);