From: Ilya Lipnitskiy Date: Wed, 8 Dec 2021 01:28:21 +0000 (-0800) Subject: toolchain/gcc: remove upstreamed patch, add backport X-Git-Tag: v22.03.0-rc1~939 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=475b366a5bddac851296a528ff86d5dcb5f12a96;p=openwrt%2Fstaging%2Fhauke.git toolchain/gcc: remove upstreamed patch, add backport This patch has been upstream since GCC 10. Dragan Mladjenovic (2): Emit .note.GNU-stack for soft-float linux targets. Emit .note.GNU-stack for hard-float linux targets. Link: https://gcc.gnu.org/g:a3c1e1f2ff88 Link: https://gcc.gnu.org/g:54b3d52c3cca Add backport patch to define TARGET_LIBC_GNUSTACK on musl to add .note.GNU-stack on hard-float MIPS targets. Link: https://gcc.gnu.org/g:25abbb924968 The net effect should be the exact same functionality while following upstream code instead of a custom outdated patch. Signed-off-by: Ilya Lipnitskiy --- diff --git a/toolchain/gcc/patches/11.2.0/011-v12-configure-define-TARGET_LIBC_GNUSTACK-on-musl.patch b/toolchain/gcc/patches/11.2.0/011-v12-configure-define-TARGET_LIBC_GNUSTACK-on-musl.patch new file mode 100644 index 0000000000..94105bdf9f --- /dev/null +++ b/toolchain/gcc/patches/11.2.0/011-v12-configure-define-TARGET_LIBC_GNUSTACK-on-musl.patch @@ -0,0 +1,46 @@ +From ea650cae26da4a8fc04f0c4666f4dd776d0b5fc0 Mon Sep 17 00:00:00 2001 +From: Ilya Lipnitskiy +Date: Sun, 14 Nov 2021 21:54:25 -0800 +Subject: [PATCH] configure: define TARGET_LIBC_GNUSTACK on musl + +musl only uses PT_GNU_STACK to set default thread stack size and has no +executable stack support[0], so there is no reason not to emit the +.note.GNU-stack section on musl builds. + +[0]: https://lore.kernel.org/all/20190423192534.GN23599@brightrain.aerifal.cx/T/#u + +gcc/ChangeLog: + + * configure: Regenerate. + * configure.ac: define TARGET_LIBC_GNUSTACK on musl + +Signed-off-by: Ilya Lipnitskiy +--- + gcc/configure | 3 +++ + gcc/configure.ac | 3 +++ + 2 files changed, 6 insertions(+) + +--- a/gcc/configure ++++ b/gcc/configure +@@ -30954,6 +30954,9 @@ fi + # Check if the target LIBC handles PT_GNU_STACK. + gcc_cv_libc_gnustack=unknown + case "$target" in ++ mips*-*-linux-musl*) ++ gcc_cv_libc_gnustack=yes ++ ;; + mips*-*-linux*) + + if test $glibc_version_major -gt 2 \ +--- a/gcc/configure.ac ++++ b/gcc/configure.ac +@@ -6788,6 +6788,9 @@ fi + # Check if the target LIBC handles PT_GNU_STACK. + gcc_cv_libc_gnustack=unknown + case "$target" in ++ mips*-*-linux-musl*) ++ gcc_cv_libc_gnustack=yes ++ ;; + mips*-*-linux*) + GCC_GLIBC_VERSION_GTE_IFELSE([2], [31], [gcc_cv_libc_gnustack=yes], ) + ;; diff --git a/toolchain/gcc/patches/11.2.0/930-fix-mips-noexecstack.patch b/toolchain/gcc/patches/11.2.0/930-fix-mips-noexecstack.patch deleted file mode 100644 index 591dfe5a50..0000000000 --- a/toolchain/gcc/patches/11.2.0/930-fix-mips-noexecstack.patch +++ /dev/null @@ -1,111 +0,0 @@ -From da45b3fde60095756f5f6030f6012c23a3d34429 Mon Sep 17 00:00:00 2001 -From: Andrew McDonnell -Date: Fri, 3 Oct 2014 19:09:00 +0930 -Subject: Add .note.GNU-stack section - -See http://lists.busybox.net/pipermail/uclibc/2014-October/048671.html -Below copied from https://gcc.gnu.org/ml/gcc-patches/2014-09/msg02430.html - -Re: [Patch, MIPS] Add .note.GNU-stack section - - From: Steve Ellcey - -On Wed, 2014-09-10 at 10:15 -0700, Eric Christopher wrote: -> -> -> On Wed, Sep 10, 2014 at 9:27 AM, wrote: - -> This works except you did not update the assembly files in -> libgcc or glibc. We (Cavium) have the same patch in our tree -> for a few released versions. - -> Mind just checking yours in then Andrew? - -> Thanks! -> -eric - -I talked to Andrew about what files he changed in GCC and created and -tested this new patch. Andrew also mentioned changing some assembly -files in glibc but I don't see any use of '.section .note.GNU-stack' in -any assembly files in glibc (for any platform) so I wasn't planning on -creating a glibc to add them to mips glibc assembly language files. - -OK to check in this patch? - -Steve Ellcey -sellcey@mips.com - - - -2014-09-26 Steve Ellcey ---- - gcc/config/mips/mips.c | 3 +++ - libgcc/config/mips/crti.S | 4 ++++ - libgcc/config/mips/crtn.S | 3 +++ - libgcc/config/mips/mips16.S | 4 ++++ - libgcc/config/mips/vr4120-div.S | 4 ++++ - 5 files changed, 18 insertions(+) - ---- a/gcc/config/mips/mips.c -+++ b/gcc/config/mips/mips.c -@@ -22890,6 +22890,9 @@ mips_asm_file_end (void) - #define TARGET_ASM_FILE_END mips_asm_file_end - - -+#undef TARGET_ASM_FILE_END -+#define TARGET_ASM_FILE_END file_end_indicate_exec_stack -+ - struct gcc_target targetm = TARGET_INITIALIZER; - - #include "gt-mips.h" ---- a/libgcc/config/mips/crti.S -+++ b/libgcc/config/mips/crti.S -@@ -24,6 +24,10 @@ see the files COPYING3 and COPYING.RUNTI - /* An executable stack is *not* required for these functions. */ - #include "gnustack.h" - -+ -+/* An executable stack is *not* required for these functions. */ -+ .section .note.GNU-stack,"",%progbits -+ - /* 4 slots for argument spill area. 1 for cpreturn, 1 for stack. - Return spill offset of 40 and 20. Aligned to 16 bytes for n32. */ - ---- a/libgcc/config/mips/crtn.S -+++ b/libgcc/config/mips/crtn.S -@@ -24,6 +24,9 @@ see the files COPYING3 and COPYING.RUNTI - /* An executable stack is *not* required for these functions. */ - #include "gnustack.h" - -+/* An executable stack is *not* required for these functions. */ -+ .section .note.GNU-stack,"",%progbits -+ - /* 4 slots for argument spill area. 1 for cpreturn, 1 for stack. - Return spill offset of 40 and 20. Aligned to 16 bytes for n32. */ - ---- a/libgcc/config/mips/mips16.S -+++ b/libgcc/config/mips/mips16.S -@@ -51,6 +51,10 @@ see the files COPYING3 and COPYING.RUNTI - values using the soft-float calling convention, but do the actual - operation using the hard floating point instructions. */ - -+/* An executable stack is *not* required for these functions. */ -+ .section .note.GNU-stack,"",%progbits -+ .previous -+ - #if defined _MIPS_SIM && (_MIPS_SIM == _ABIO32 || _MIPS_SIM == _ABIO64) - - /* This file contains 32-bit assembly code. */ ---- a/libgcc/config/mips/vr4120-div.S -+++ b/libgcc/config/mips/vr4120-div.S -@@ -29,6 +29,10 @@ see the files COPYING3 and COPYING.RUNTI - -mfix-vr4120. div and ddiv do not give the correct result when one - of the operands is negative. */ - -+/* An executable stack is *not* required for these functions. */ -+ .section .note.GNU-stack,"",%progbits -+ .previous -+ - .set nomips16 - - #define DIV \