From: Nikolay Martynov Date: Thu, 4 Jul 2024 03:21:52 +0000 (-0400) Subject: ramips: rename interfaces for tplink er605v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4705398bbf1070200e83d9a6da521eb41f649da8;p=openwrt%2Fstaging%2Fxback.git ramips: rename interfaces for tplink er605v2 Currently eth1 (which is the first "lan" interface) doesn't work on this device. During boot the following can be seen in logs: ``` [ 2.252804] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module [ 2.266060] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 19 [ 2.277889] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 19 ... [ 2.355157] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module [ 2.390312] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode [ 2.398597] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx [ 2.403872] mt7530-mdio mdio-bus:1f eth1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=21) [ 2.416988] mtk_soc_eth 1e100000.ethernet eth0: error -17 registering interface eth1 [ 2.426973] mt7530-mdio mdio-bus:1f eth2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=22) [ 2.440996] mt7530-mdio mdio-bus:1f eth3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=23) [ 2.454405] mt7530-mdio mdio-bus:1f eth4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=24) [ 2.467198] mtk_soc_eth 1e100000.ethernet eth0: entered promiscuous mode [ 2.474117] DSA: tree 0 setup ... [ 6.820998] mtk_soc_eth 1e100000.ethernet dsa: renamed from eth0 [ 6.919904] mtk_soc_eth 1e100000.ethernet wan: renamed from eth1 ``` So the problem seems to be the fact that built-in gmacs get default names (eth0/eth1) and are renamed after switch ports are initialized. This means that when switch port with name `eth1` is brought up this name is still used by gmac1 causing switch port's init to fail. This patch just renames the ports to avoid name collision. Note: this will break existing configs for this device because it renames all the ports. This should not be major problem because this device doesn't have a proper OEM image and is only flashable with serial access, meaning there should not be many users. Signed-off-by: Nikolay Martynov Link: https://github.com/openwrt/openwrt/pull/15865 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts b/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts index 1299b02806..28c8e8b083 100644 --- a/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts +++ b/target/linux/ramips/dts/mt7621_tplink_er605-v2.dts @@ -84,7 +84,7 @@ &gmac1 { status = "okay"; - label = "eth0"; + label = "wan1"; phy-handle = <ðphy0>; }; @@ -97,22 +97,22 @@ port@1 { status = "okay"; - label = "eth1"; + label = "lan2"; }; port@2 { status = "okay"; - label = "eth2"; + label = "lan3"; }; port@3 { status = "okay"; - label = "eth3"; + label = "lan4"; }; port@4 { status = "okay"; - label = "eth4"; + label = "lan5"; }; }; }; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 2932f13e99..70454bcbaf 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -2732,6 +2732,8 @@ TARGET_DEVICES += tplink_ec330-g5u-v1 define Device/tplink_er605-v2 $(Device/nand) + DEVICE_COMPAT_VERSION := 1.2 + DEVICE_COMPAT_MESSAGE := Config cannot be migrated because interface names have changed DEVICE_VENDOR := TP-Link DEVICE_MODEL := ER605 DEVICE_VARIANT := v2 diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index f72fd46f82..12098f0bbf 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -148,7 +148,7 @@ ramips_setup_interfaces() ucidef_set_interface_lan "lan0 lan1 lan2 lan3" ;; tplink,er605-v2) - ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0" + ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan1" ;; tplink,tl-wpa8631p-v3) ucidef_set_interface_lan "lan1 lan2 lan3 plc0" diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/05_compat-version b/target/linux/ramips/mt7621/base-files/etc/board.d/05_compat-version index c510dfd81a..acc69021d0 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/05_compat-version +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/05_compat-version @@ -11,6 +11,9 @@ case "$(board_name)" in iptime,ax2004m) ucidef_set_compat_version "2.0" ;; + tplink,er605-v2) + ucidef_set_compat_version "1.2" + ;; *) ucidef_set_compat_version "1.1" ;;