From: Sander Vanheule Date: Fri, 10 Sep 2021 08:57:19 +0000 (+0200) Subject: firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version X-Git-Tag: mikrotik~1298 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=46dec9952bb059156eaf5a82759ee32cc7cd6a0f;p=openwrt%2Fstaging%2Fchunkeey.git firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version Starting with v3 of the vendor firmware for the TP-Link EAP235-Wall v1, downgrades to firmware versions below v3 as not allowed. Since OpenWrt uses version 0.0.0 as a default, this causes the factory install to fail on devices with a recent firmware. This failure is associated by the following message on the device's serial console: EAP235/230-Wall forbid fw reverted from 3.x.x to lower version! Vendor firmware (v3) also uses build and release numbers to compare images, so identical version numbers are very unlikely to cause issues. Bump the firmware version to 3.0.0 to ensure users can install OpenWrt on their devices. Reported-by: Colton Conor Tested-by: Colton Conor Signed-off-by: Sander Vanheule --- diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index b3cfe39b2c..b20d1fdd30 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -1560,7 +1560,7 @@ static struct device_info boards[] = { "SupportList:\r\n" "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n", .part_trail = PART_TRAIL_NONE, - .soft_ver = SOFT_VER_DEFAULT, + .soft_ver = SOFT_VER_NUMERIC(3, 0, 0), .soft_ver_compat_level = 1, .partitions = {