From: Alexey Kardashevskiy Date: Wed, 19 Dec 2018 08:52:16 +0000 (+1100) Subject: powerpc/powernv: Move npu struct from pnv_phb to pci_controller X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=46a1449d9e39478a35d35d9d9025776f6cee24fb;p=openwrt%2Fstaging%2Fblogic.git powerpc/powernv: Move npu struct from pnv_phb to pci_controller The powernv PCI code stores NPU data in the pnv_phb struct. The latter is referenced by pci_controller::private_data. We are going to have NPU2 support in the pseries platform as well but it does not store any private_data in in the pci_controller struct; and even if it did, it would be a different data structure. This makes npu a pointer and stores it one level higher in the pci_controller struct. Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman --- diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 94d449031b18..aee4fcc24990 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -129,6 +129,7 @@ struct pci_controller { #endif /* CONFIG_PPC64 */ void *private_data; + struct npu *npu; }; /* These are used for config access before all the PCI probing diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c index 00f1eff807b0..0bc8b6912eba 100644 --- a/arch/powerpc/platforms/powernv/npu-dma.c +++ b/arch/powerpc/platforms/powernv/npu-dma.c @@ -326,6 +326,25 @@ struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe) return gpe; } +/* + * NPU2 ATS + */ +/* Maximum possible number of ATSD MMIO registers per NPU */ +#define NV_NMMU_ATSD_REGS 8 + +/* An NPU descriptor, valid for POWER9 only */ +struct npu { + int index; + __be64 *mmio_atsd_regs[NV_NMMU_ATSD_REGS]; + unsigned int mmio_atsd_count; + + /* Bitmask for MMIO register usage */ + unsigned long mmio_atsd_usage; + + /* Do we need to explicitly flush the nest mmu? */ + bool nmmu_flush; +}; + /* Maximum number of nvlinks per npu */ #define NV_MAX_LINKS 6 @@ -477,7 +496,6 @@ static void acquire_atsd_reg(struct npu_context *npu_context, int i, j; struct npu *npu; struct pci_dev *npdev; - struct pnv_phb *nphb; for (i = 0; i <= max_npu2_index; i++) { mmio_atsd_reg[i].reg = -1; @@ -492,8 +510,7 @@ static void acquire_atsd_reg(struct npu_context *npu_context, if (!npdev) continue; - nphb = pci_bus_to_host(npdev->bus)->private_data; - npu = &nphb->npu; + npu = pci_bus_to_host(npdev->bus)->npu; mmio_atsd_reg[i].npu = npu; mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu); while (mmio_atsd_reg[i].reg < 0) { @@ -661,6 +678,7 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev, struct pnv_phb *nphb; struct npu *npu; struct npu_context *npu_context; + struct pci_controller *hose; /* * At present we don't support GPUs connected to multiple NPUs and I'm @@ -688,8 +706,9 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev, return ERR_PTR(-EINVAL); } - nphb = pci_bus_to_host(npdev->bus)->private_data; - npu = &nphb->npu; + hose = pci_bus_to_host(npdev->bus); + nphb = hose->private_data; + npu = hose->npu; /* * Setup the NPU context table for a particular GPU. These need to be @@ -763,7 +782,7 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev, */ WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], npdev); - if (!nphb->npu.nmmu_flush) { + if (!npu->nmmu_flush) { /* * If we're not explicitly flushing ourselves we need to mark * the thread for global flushes @@ -801,6 +820,7 @@ void pnv_npu2_destroy_context(struct npu_context *npu_context, struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0); struct device_node *nvlink_dn; u32 nvlink_index; + struct pci_controller *hose; if (WARN_ON(!npdev)) return; @@ -808,8 +828,9 @@ void pnv_npu2_destroy_context(struct npu_context *npu_context, if (!firmware_has_feature(FW_FEATURE_OPAL)) return; - nphb = pci_bus_to_host(npdev->bus)->private_data; - npu = &nphb->npu; + hose = pci_bus_to_host(npdev->bus); + nphb = hose->private_data; + npu = hose->npu; nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0); if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index", &nvlink_index))) @@ -887,9 +908,15 @@ int pnv_npu2_init(struct pnv_phb *phb) struct pci_dev *gpdev; static int npu_index; uint64_t rc = 0; + struct pci_controller *hose = phb->hose; + struct npu *npu; + int ret; + + npu = kzalloc(sizeof(*npu), GFP_KERNEL); + if (!npu) + return -ENOMEM; - phb->npu.nmmu_flush = - of_property_read_bool(phb->hose->dn, "ibm,nmmu-flush"); + npu->nmmu_flush = of_property_read_bool(hose->dn, "ibm,nmmu-flush"); for_each_child_of_node(phb->hose->dn, dn) { gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn)); if (gpdev) { @@ -903,18 +930,29 @@ int pnv_npu2_init(struct pnv_phb *phb) } } - for (i = 0; !of_property_read_u64_index(phb->hose->dn, "ibm,mmio-atsd", + for (i = 0; !of_property_read_u64_index(hose->dn, "ibm,mmio-atsd", i, &mmio_atsd); i++) - phb->npu.mmio_atsd_regs[i] = ioremap(mmio_atsd, 32); + npu->mmio_atsd_regs[i] = ioremap(mmio_atsd, 32); - pr_info("NPU%lld: Found %d MMIO ATSD registers", phb->opal_id, i); - phb->npu.mmio_atsd_count = i; - phb->npu.mmio_atsd_usage = 0; + pr_info("NPU%d: Found %d MMIO ATSD registers", hose->global_number, i); + npu->mmio_atsd_count = i; + npu->mmio_atsd_usage = 0; npu_index++; - if (WARN_ON(npu_index >= NV_MAX_NPUS)) - return -ENOSPC; + if (WARN_ON(npu_index >= NV_MAX_NPUS)) { + ret = -ENOSPC; + goto fail_exit; + } max_npu2_index = npu_index; - phb->npu.index = npu_index; + npu->index = npu_index; + hose->npu = npu; return 0; + +fail_exit: + for (i = 0; i < npu->mmio_atsd_count; ++i) + iounmap(npu->mmio_atsd_regs[i]); + + kfree(npu); + + return ret; } diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index c39def4e1a42..8e3149bbd4e2 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1278,7 +1278,7 @@ static void pnv_pci_ioda_setup_PEs(void) pnv_ioda_reserve_pe(phb, 0); pnv_ioda_setup_npu_PEs(hose->bus); if (phb->model == PNV_PHB_MODEL_NPU2) - pnv_npu2_init(phb); + WARN_ON_ONCE(pnv_npu2_init(phb)); } if (phb->type == PNV_PHB_NPU_OCAPI) { bus = hose->bus; diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 25dff6b59100..771938840eff 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -8,9 +8,6 @@ struct pci_dn; -/* Maximum possible number of ATSD MMIO registers per NPU */ -#define NV_NMMU_ATSD_REGS 8 - enum pnv_phb_type { PNV_PHB_IODA1 = 0, PNV_PHB_IODA2 = 1, @@ -174,19 +171,6 @@ struct pnv_phb { unsigned int diag_data_size; u8 *diag_data; - /* Nvlink2 data */ - struct npu { - int index; - __be64 *mmio_atsd_regs[NV_NMMU_ATSD_REGS]; - unsigned int mmio_atsd_count; - - /* Bitmask for MMIO register usage */ - unsigned long mmio_atsd_usage; - - /* Do we need to explicitly flush the nest mmu? */ - bool nmmu_flush; - } npu; - int p2p_target_count; };