From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Thu, 11 Feb 2010 20:41:05 +0000 (-0800)
Subject: drm/i915: enable/disable LVDS port at DPMS time
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=469d129664c5b83f37ca74913700d416d584833b;p=openwrt%2Fstaging%2Fblogic.git

drm/i915: enable/disable LVDS port at DPMS time

It would be good to disable the LVDS port when we shut down the panel
to save power.  We haven't done so until now because we had trouble
getting the right LVDS parameters from the BIOS.  I think we're past
that now, so enabling and disabling the port should be safe, though it
would probably be made cleaner with some additional changes to the
display code, where we also bang on the LVDS reg to set the pairing
correctly etc.

Seems to save a bit of power (up to 300mW in my basic wattsup
meter testing).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 222459ad178d..14e516fdc2dd 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -89,17 +89,22 @@ static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
 static void intel_lvds_set_power(struct drm_device *dev, bool on)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 pp_status, ctl_reg, status_reg;
+	u32 pp_status, ctl_reg, status_reg, lvds_reg;
 
 	if (HAS_PCH_SPLIT(dev)) {
 		ctl_reg = PCH_PP_CONTROL;
 		status_reg = PCH_PP_STATUS;
+		lvds_reg = PCH_LVDS;
 	} else {
 		ctl_reg = PP_CONTROL;
 		status_reg = PP_STATUS;
+		lvds_reg = LVDS;
 	}
 
 	if (on) {
+		I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
+		POSTING_READ(lvds_reg);
+
 		I915_WRITE(ctl_reg, I915_READ(ctl_reg) |
 			   POWER_TARGET_ON);
 		do {
@@ -115,6 +120,9 @@ static void intel_lvds_set_power(struct drm_device *dev, bool on)
 		do {
 			pp_status = I915_READ(status_reg);
 		} while (pp_status & PP_ON);
+
+		I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
+		POSTING_READ(lvds_reg);
 	}
 }