From: Heiko Schocher Date: Thu, 13 Jan 2011 07:25:00 +0000 (+0100) Subject: mpc5200, digsy_mtc: add support for rev5 board version X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=466f0137e8661fb62cbece1ce764f8369080c6e8;p=project%2Fbcm63xx%2Fu-boot.git mpc5200, digsy_mtc: add support for rev5 board version difference to previous board version: - M29W128GH flash from Numonyx - SDRAM ISSI IS45S16800 (Option A2 105°C) - rev5 uses RTC RV-3029-C2 - update cs0 and cs1 baseaddr and length depending on the detected flash size. - added Werner Pfister as maintainer for the digsy board variants - As the M29W128GH needs a special flash_cmd_reset() document that in the new file doc/README.cfi. - move "#endif /* CONFIG_CMD_IDE */" to the right place - remove LOWBOOT config option for digsy_mtc and digsy_mtc_rev5 boards - change doc/README.cfi as Stefan Roese suggested Signed-off-by: Heiko Schocher Signed-off-by: Stefan Roese Acked-by: Detlev Zundel cc: Wolfgang Denk cc: Stefan Roese cc: Werner Pfister cc: Detlev Zundel --- diff --git a/MAINTAINERS b/MAINTAINERS index a6e8a7fe79..edd1c5cd2a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -339,6 +339,10 @@ Denis Peter MIP405 PPC4xx PIP405 PPC4xx +Werner Pfister + digsy_mtc mpc5200 + digsy_mtc_rev5 mpc5200 + Kim Phillips MPC8349EMDS MPC8349 diff --git a/board/digsy_mtc/digsy_mtc.c b/board/digsy_mtc/digsy_mtc.c index cc6087b339..afb0948057 100644 --- a/board/digsy_mtc/digsy_mtc.c +++ b/board/digsy_mtc/digsy_mtc.c @@ -39,12 +39,29 @@ #include #include #include "eeprom.h" +#if defined(CONFIG_DIGSY_REV5) +#include "is45s16800a2.h" +#include +#else #include "is42s16800a-7t.h" +#endif +#include DECLARE_GLOBAL_DATA_PTR; extern int usb_cpu_init(void); +#if defined(CONFIG_DIGSY_REV5) +/* + * The M29W128GH needs a specail reset command function, + * details see the doc/README.cfi file + */ +void flash_cmd_reset(flash_info_t *info) +{ + flash_write_cmd(info, 0, 0, AMD_CMD_RESET); +} +#endif + #ifndef CONFIG_SYS_RAMBOOT static void sdram_start(int hi_addr) { @@ -175,6 +192,9 @@ int checkboard(void) char *s = getenv("serial#"); puts ("Board: InterControl digsyMTC"); +#if defined(CONFIG_DIGSY_REV5) + puts (" rev5"); +#endif if (s != NULL) { puts(", "); puts(s); @@ -305,12 +325,97 @@ void ide_set_reset(int idereset) setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); } #endif /* CONFIG_IDE_RESET */ +#endif /* CONFIG_CMD_IDE */ #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +static void ft_delete_node(void *fdt, const char *compat) +{ + int off = -1; + int ret; + + off = fdt_node_offset_by_compatible(fdt, -1, compat); + if (off < 0) { + printf("Could not find %s node.\n", compat); + return; + } + + ret = fdt_del_node(fdt, off); + if (ret < 0) + printf("Could not delete %s node.\n", compat); +} +#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) +static void ft_adapt_flash_base(void *blob) +{ + flash_info_t *dev = &flash_info[0]; + int off; + struct fdt_property *prop; + int len; + u32 *reg, *reg2; + + off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb"); + if (off < 0) { + printf("Could not find fsl,mpc5200b-lpb node.\n"); + return; + } + + /* found compatible property */ + prop = fdt_get_property_w(blob, off, "ranges", &len); + if (prop) { + reg = reg2 = (u32 *)&prop->data[0]; + + reg[2] = dev->start[0]; + reg[3] = dev->size; + fdt_setprop(blob, off, "ranges", reg2, len); + } else + printf("Could not find ranges\n"); +} + +extern ulong flash_get_size (phys_addr_t base, int banknum); + +/* Update the Flash Baseaddr settings */ +int update_flash_size (int flash_size) +{ + volatile struct mpc5xxx_mmap_ctl *mm = + (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; + flash_info_t *dev; + int i; + int size = 0; + unsigned long base = 0x0; + u32 *cs_reg = (u32 *)&mm->cs0_start; + + for (i = 0; i < 2; i++) { + dev = &flash_info[i]; + + if (dev->size) { + /* calculate new base addr for this chipselect */ + base -= dev->size; + out_be32(cs_reg, START_REG(base)); + cs_reg++; + out_be32(cs_reg, STOP_REG(base, dev->size)); + cs_reg++; + /* recalculate the sectoraddr in the cfi driver */ + size += flash_get_size(base, i); + } + } + gd->bd->bi_flashstart = base; + return 0; +} +#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */ + void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + /* + * There are 2 RTC nodes in the DTS, so remove + * the unneeded node here. + */ +#if defined(CONFIG_DIGSY_REV5) + ft_delete_node(blob, "dallas,ds1339"); +#else + ft_delete_node(blob, "mc,rv3029c2"); +#endif +#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) + ft_adapt_flash_base(blob); +#endif } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ - -#endif /* CONFIG_CMD_IDE */ diff --git a/board/digsy_mtc/is45s16800a2.h b/board/digsy_mtc/is45s16800a2.h new file mode 100644 index 0000000000..6ab5c123ea --- /dev/null +++ b/board/digsy_mtc/is45s16800a2.h @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * based on: + * (C) Copyright 2004-2009 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_MODE 0x00CD0000 +#define SDRAM_CONTROL 0x50470000 +#define SDRAM_CONFIG1 0xD2322900 +#define SDRAM_CONFIG2 0x8AD70000 diff --git a/boards.cfg b/boards.cfg index 54ed0f786f..054bfc7e70 100644 --- a/boards.cfg +++ b/boards.cfg @@ -239,8 +239,9 @@ BC3450 powerpc mpc5xxx bc3450 canmb powerpc mpc5xxx cm5200 powerpc mpc5xxx digsy_mtc powerpc mpc5xxx digsy_mtc -digsy_mtc_LOWBOOT powerpc mpc5xxx digsy_mtc - - digsy_mtc:SYS_TEXT_BASE=0xFF000000 digsy_mtc_RAMBOOT powerpc mpc5xxx digsy_mtc - - digsy_mtc:SYS_TEXT_BASE=0x00100000 +digsy_mtc_rev5 powerpc mpc5xxx digsy_mtc - - digsy_mtc:DIGSY_REV5 +digsy_mtc_rev5_RAMBOOT powerpc mpc5xxx digsy_mtc - - digsy_mtc:SYS_TEXT_BASE=0x00100000,DIGSY_REV5 galaxy5200 powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200 galaxy5200_LOWBOOT powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200_LOWBOOT icecube_5200 powerpc mpc5xxx icecube - - IceCube diff --git a/doc/README.cfi b/doc/README.cfi new file mode 100644 index 0000000000..d087ff0d63 --- /dev/null +++ b/doc/README.cfi @@ -0,0 +1,29 @@ +The common CFI driver provides this weak default implementation for +flash_cmd_reset(): + +void __flash_cmd_reset(flash_info_t *info) +{ + /* + * We do not yet know what kind of commandset to use, so we issue + * the reset command in both Intel and AMD variants, in the hope + * that AMD flash roms ignore the Intel command. + */ + flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); +} +void flash_cmd_reset(flash_info_t *info) + __attribute__((weak,alias("__flash_cmd_reset"))); + + +Some flash chips seems to have trouble with this reset sequence. In this case +the board specific code can override this weak default version with a board +specific function. For example the digsy_mtc board equipped with the M29W128GH +from Numonyx needs this version to function properly: + +void flash_cmd_reset(flash_info_t *info) +{ + flash_write_cmd(info, 0, 0, AMD_CMD_RESET); +} + +see also: +http://www.mail-archive.com/u-boot@lists.denx.de/msg24368.html diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index d541160bd3..bfbec6a860 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -249,9 +249,14 @@ /* * RTC configuration */ +#if defined(CONFIG_DIGSY_REV5) +#define CONFIG_SYS_I2C_RTC_ADDR 0x56 +#define CONFIG_RTC_RV3029 +#else #define CONFIG_RTC_DS1337 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #define CONFIG_SYS_DS1339_TCR_VAL 0xAB /* diode + 4k resistor */ +#endif /* * Flash configuration @@ -259,14 +264,24 @@ #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 +#if defined(CONFIG_DIGSY_REV5) +#define CONFIG_SYS_FLASH_BASE 0xFE000000 +#define CONFIG_SYS_FLASH_BASE_CS1 0xFC000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_CS1, \ + CONFIG_SYS_FLASH_BASE} +#define CONFIG_SYS_UPDATE_FLASH_SIZE +#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE +#else #define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 - #define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#endif + #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_FLASH_16BIT #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_FLASH_SIZE 0x01000000 #define CONFIG_SYS_FLASH_ERASE_TOUT 240000 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 @@ -409,6 +424,12 @@ #define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE #define CONFIG_SYS_CS0_CFG 0x0002DD00 +#if defined(CONFIG_DIGSY_REV5) +#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE_CS1 +#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_CS1_CFG 0x0002DD00 +#endif + #define CONFIG_SYS_CS_BURST 0x00000000 #define CONFIG_SYS_CS_DEADCYCLE 0x11111111